I saw these things originally on Reddit that extracted the average colour of frames from films and put them together to make a colour palette for said film, the original creator has a site called The Colors of Motion. I thought it would be cool to try and create a simple PowerShell script that does the same thing.

Here are a few examples:
Finding Nemo: https://i.imgur.com/8YwOlwK.png
The Bee Movie: https://i.imgur.com/umbd3co.png
Harry Potter and the Philosopher's Stone: https://i.imgur.com/6rsbv0M.png

I've hosted my code on GitHub so if anyone wants to use my PowerShell script or suggest some ways to improve it feel free. You can use pretty much any video file as input as it uses ffmpeg to extract the frames.

GitHub link: https://github.com/ArkadiusBear/FilmStrip

hey all!

i made a post awhile back talking about how i was in a tech rut, and tired of creating the same things over and over again, working with the same libraries and the same frameworks.

i was bored of it!

so last week i said hell with it and i spent more money than i should've on udemy courses, learned a lot about javascript and the mern stack (mongodb, express.js, react, node.js)

then, after a few nights of staying up way later than i should have (i have presently been awake for 27 hours) i built this thing:

https://dry-castle-80238.herokuapp.com/dashboard

dev-connector.

a small little social media site for the technically-minded.

nothing groundbreaking or super fancy - just a basic social media site with posts, comments, user profiles and all that. but it's the first thing in awhile that i've actually finished and put into production on some capacity (even if it's just heroku)

jump in, leave a few comments, and let me know what you think. :)

passwords are hashed with bcryptjs, but i've been recommending everyone just use fake login info on sign up for safety's sake.

Link to Google doc: https://docs.google.com/spreadsheets/d/1Hc-Ti6Pff_qUZLAfzzL7WjhFNh2m_XPvMkdYBL6mLzI/edit?usp=sharing

I created this document a while back and update it every couple months. There's an Introduction tab with guidance on how to browse the spreadsheets, which I've copied below for reference:

(1) This document outlines various TV shows and is broken up into 3 tabs: Watched, Watching, and Want to Watch.

Watched: Shows I've completed through series finale or given up on. Some of these were canceled early.

Watching: Shows I'm actively watching day-to-day or shows in between seasons that will air new episodes in the future.

Want to Watch: Shows I haven't started and want to watch. Many of them are recommendations I jotted down to avoid forgetting, so this list will sometimes be unalphabetized.

(2) Certain columns of information were exported directly from IMDB, and the page for each show is linked in the rating from the IMDB column.

(3) On the Watched and Watching tabs, there are columns for Recommend? and Notes to provide background that will help decide what to watch. Don't let any of my negative comments stop you from watching a show you're interested in.

(4) The Recommended? column is divided into the following categories: Must Watch, Yes, Maybe, No. These are all based on personal opinion with extra discussion/information in the Notes column.

(5) I've shared this with most people using View Only permissions, so download the Excel file (or copy to your Drive account) to filter columns by genre, rating, and personal recommendation.

Disclaimer: not everyone will have the same tastes as me - that's okay. I welcome any disagreement about how I've rated shows and hope to get some discussion going.

• What shows have I missed that I need to watch?

• What shows did I strongly recommend that you didn't like?

• What shows did I give up on too early?

I expect to take some heat for quitting Brooklyn 99 around season 3.

• What shows haven't come out that I should keep an eye out for?

Like Jack Ryan which debuts this month.

• How can I improve the document?

I considered including a column with the show's network or where it can be legally streamed, but this is pretty tedious given the nature of broadcast rights.

Someone recently asked me to replace the battery in their old iPod, and I found myself wondering what I should do with the old battery. It still works, but has less capacity than when it was new. So I looked around my workshop and found some of these surface mount LEDs and decided to test the limits of my soldering skills and make a flashlight out of them.

These LEDs are very hard to solder, since they're surface-mount and the pads are on the bottom of the LED. They were never meant to be soldered by hand, but rather placed by machine onto a specific amount of solder paste, which is then baked in a fancy oven at very specific temperatures for very specific times. To solder these by hand, you need to create a liquid puddle of solder and sorta float the LED on top, while being careful to not short the pads which are very close together as well as not overheating the LED. The temperature the plastic melts at seems to be only a few degrees higher than the solder melts at.

I wired up 5 of the LEDs in parallel, each with its own 6.8ohm resistor wired in series with the LED. This should limit the current to 150mA per LED. I hot glued this in place, as well as a lithium battery charging circuit I got off ebay for a dollar. Here's one such listing.

I slapped on a pushbutton, and Bob's your uncle! It worked first try!

Here's a blurry picture of the finished product. I'm pretty proud of how it came out, considering how tiny and fiddly the soldering was. And, I think I'll actually get some use out of it too. The battery ought to last at least an hour of runtime, and the thing is seriously bright.

Anyone here into electronics as a hobby?

Edit: Better-ish pic: https://i.imgur.com/Kxqy1jg.jpg

^{No potatoes were harmed in the making of this photo.}

5 tracks from my game Rashtal. Feedback would be appreciated.

Playlist

Or each song separately:

• Life in the Treetops;
• Song of the Forest;
• Through the Sunken Glades;
• The Canopy;
• The Forest Floor;

The game is still in development. Just sharing some music to get feedback.

Guide can be found here

Right now, the guide assumes you aren't dual booting. This is because I've never really dual booted off a single HDD, so while I probably could include it in the guide, I don't feel comfortable without first testing the process.

This guide also sets you up with BTRFS, but you can still use ext4, just requires changing two lines.

Hey all, I'm a board game designer named Adam Wyse and I just wanted to share my latest project that went live on Kickstarter this morning!

A little bit about me; I'm a former software engineer who now works in the board game industry full time. I have a few published games (Head of Mousehold, Masque of the Red Death), and many more that have been signed and will be coming out over the next year or two. I work for Roxley Games doing logistics and development. If you're a fan of modern tabletop games you've probably heard of Santorini or Brass.

Anyways, Mayday Games is publishing Poetry Slam; a word/party game for 3 to 8 players (10 if we reach the stretch goal). It's all about writing a word based on a prompt, then coming up with a short poem that allows other players to guess your word. Each player loses a letter each round that they can no longer use in later rounds. Coming up with your word faster will earn you more points, but you will lose more valuable letters! It's a strategic and hilarious word game that you can play with a big group - it makes for a pretty fun and unique experience.

https://www.kickstarter.com/projects/maydaygames/poetry-slam-a-beatnik-3-8-player-party-game

I did up a full how to play video here a couple weeks ago:
https://www.youtube.com/watch?v=c_Y-0FBCjyM

One of the cool things that Mayday is doing is a referral system. If you back the game you get a referral link. If you get someone else to back the game using your link, you get a free playmat. Whoever refers the most people will get a cool prize pack!

If you have any questions about Poetry Slam, board game design in general, the tabletop industry, or Roxley Games, I'm happy to answer! I hope you'll give the project a look!

Edit: The project was cancelled because it kind of stalled in the middle, but the game is still going to be produced! It will be available at Origins board game convention in June, and then in retail shortly afterwards. If you are interested in checking out a gameplay video, we recorded on at my local game store last night: https://www.facebook.com/sentrybox/videos/10156328694703428/