Installing a SATA SSD in a Lenovo x270 (shielding vs no shielding)

milkbones_4_bigelow
Sat, 04 Nov 2023 20:25:51 +0000

Hi all,

Has been a while :)

I'm having an issue with upgrading an SSD on a Lenovo x270 and thought I'd reach out for some advice.

I'm installing a SATA SSD (Crucial BX500) but the original caddy in the laptop is for a NVME M.2 PCIe SSD. The only part I can use of the original caddy is the plastic shielding that can fit around the new drive.

The issue is, now I have no shielding. The new drive will fit in the 2.5 inch slot the old drive was in but it rests on top of only two small pieces of foam glued to the board. Do you think this is an issue? Should I shield it somehow? Perhaps EMI tape? If so, should I shield both the top and bottom of the drive? There's no caddy I can find for this use case in Europe.

Any help would be appreciated.

p.s I am following this article: https://techblog.paalijarvi.fi/2020/01/02/32gb-ram-for-thinkpad-x270-and-other-pimp-ups/

As you can see, in their case, some metal foil (an EMC cover?) came with the eBay cable they bought to support the SATA connection. I'm wondering if that's nesscary.

Comments URL: https://tildes.net/~tech/1bvs/installing_a_sata_ssd_in_a_lenovo_x270_shielding_vs_no_shielding

Votes: 10

Comments: 7