I thought I would share my thoughts and experiences daily driving Linux (Fedora KDE Plasma) for the past week.

Why did I switch from Windows to Linux?

My plan was to switch to Linux once Windows 10 hit EoL in Fall 2025. This was due to my computer not supporting Windows 11. This past September, my computer broke (probably MoBo), and so I swapped out my CPU and MoBo, which probably can support Windows 11. However, this hardware swap unactivated my Windows, Microsoft support was not helpful, and I am not a fan of the direction Windows is heading in (removing local accounts, Recall, and a general vibe I get from Microsoft of removing control from end users). So, I decided to make the jump to Linux a year sooner than expected.

My Previous Experience with Linux

So I would say I am moderately experienced with Linux before this. Personally, I have setup a Proxmox server, in which I setup an openmediavault NAS, and played around with various desktop distros for personal curiosity. I also switched my old laptop over to Linux a few years back, but had very low requirements of the tasks that laptop had to perform. I also took a post secondary class on Linux, primarily covering system administration tasks like BASH/PERL scripting, Apache server admin, LDAP, and file sharing all using Ubuntu. So going into this I had a moderate amount of experience, all within Debian based distros. The bigger change with switching my desktop is that it is my primary computer, so the expectations of what it needed to run was higher.

Why I chose Fedora KDE Plasma

I did a post about a month ago asking for recommendations to look into: https://tildes.net/~tech/1ji6/switching_to_linux_looking_for_distro_recommendations
I settled on Fedora KDE Plasma for a few reasons:

• I appreciate the philosophy of not being rolling release like Arch, but also a quicker release cycle than Ubuntu and its forks. I felt this was a good middle ground where I get newer advances without dealing with stuff breaking frequently when there was a new update.
• It can handle most tasks graphically, without having to dig into the console often (more on this later).
• I appreciate the Windows-esque styling of KDE Plasma. I got used to Windows so didn't want a radical shake up. However, it feels to me like a better version of Windows (or maybe just not touch screen oriented and ad bloated).

Headaches/glitches

Some of these are ongoing, while others were issues that I have worked through

• FIXED: Installing nvidia drivers via RPM Fusion. Before installing drivers, the computer was unstable and frequently froze. I ended up just loading a command line only interface and manually typing in the commands to install RPM Fusion and the nvidia drivers. I was planning on installing it via command line anyway, so the main headache here was typing it out instead of copy and pasting the commands in. I also had an issue where I initially installed the wrong drivers.
• ONGOING/INFREQUENT: Occasionally when I wake the computer from sleep, at the lock screen, my mouse is responsive, but my keyboard is not. Also, selecting the virtual keyboard does not work, as the virtual keyboard does not load. I tried waiting for the computer to go back to sleep, and then wake it from sleep to see if it reloads things properly. The computer does not go to sleep normally, so the solution right now is to just shut down the computer and then it is solved.
• FIXED: Steam launched games not closing properly. Specifically Far Cry 5, which runs properly, when I exit the game, the process does not fully close down. From my perspective, it seems like it has, but Steam indicates that it is still running. The solution is to go into System Monitor and close down the Steam application with high resource usage, as that is actually the game still running in the background.
• ONGOING/INFREQUENT/PARTIALLY FIXED: When I wake the computer from sleep, and login, there is a large amount of visual glitches and artifacts on my desktop environment. It is both in applications and especially on the Panel. The current solution is to run the command systemctl restart --user plasma-plasmashell which drastically improves the situation, but the glitches are still partially there. This has just started last night, so probably a computer restart may solve the problem, but I am trying to avoid having to constantly restart the computer.
• FIXED: As Far Cry 5 was a brand new game, when launching it from Steam for the first time, Ubisoft's software wanted me to enter a CD Key, but Steam was not giving me one. Thinking this was a Linux related issue, I switched to my Windows install, and had the same issue. Turns out it is a Ubisoft bug in their software that also impacted Windows. I found a solution online on how to solve it for Windows, did that and authenticated the game. Then I switched over to Linux and the game ran well.
• FIXED: KDE Wallet Service was doing an excessive amount of prompts. I uninstalled the software, but the prompts continued. Turns out it needs to be disabled before being uninstalled, or the prompts continue. So I had to reinstall it, disable it, then uninstall it. Annoying but minor and it is fixed now.
• ONGOING/INFREQUENT/PARTIALLY SOLVED: When waking from sleep, sometimes my background image on my primary display does not fully cover the desktop. This is most likely due to my primary display being 1920x1080, and my secondary display being 1600x900, so the image is not being scaled independently for both displays. The solution right now is to open the settings to change background, and load any image, but not save changes, as this causes my original image to be reloaded properly

Installing/Running Applications

I have been primarily using Flatpaks to install applications. Overall it has been a smooth process. One pain point I have is it seems that the Minecraft Official Launcher for non-Debian systems is kind of clunky requiring me to login to my Microsoft account every time I open the game. This will probably be solved by switching to a third party launcher in the near future. The one software that I haven't gotten around to installing yet is DaVinci Resolve.

What Surprised Me so Far?

There are a few things that have been a pleasant surprise:

• I use the console more than I expected going into it. For flatpaks, I tend to just copy and paste the commands into console. RPM Fusion also had a GUI based install option but I preferred the console option instead. I also have VIM installed, and use that as my digital notepad, just doing simple console commands of vi fileName in my home directory. I was not expecting to use the console as much as I have been, and I think that is partially due to now being more experienced with it, I gravitate towards using the console which I know how to use instead of learning how to do some tasks via a GUI..
• Most things are running better than expected. I haven't touched many games yet, but I haven't had an issue with it yet. It is worth noting that I do not play competitive shooters, so anti-cheat is not something I will have to fight with.
• Libre Office can open my .docx files. I was concerned I may have to convert my existing files to .odt before I can use them, but that does not appear to be the case. I will probably use .odt for new files going forward. It is also worth noting that I haven't worked extensively with my .docx files yet, so there may be some incompatibilities I have yet to encounter.

Overall Thoughts:

Overall I have quite enjoyed running Linux. It does require some tinkering as glitches appear, which currently I am fine with. If I had less free time to tinker and solve the issues, I would probably find Linux to be less viable and more frustrating. Also, most of my glitches can be solved by restarting the computer, although I am trying to find solutions that do not require that. I find it allows me to use the computer and change it to how I want it to be, which I have felt like Windows has gotten increasingly hostile towards the user. A good comparison on this is how the default applications that KDE has included are easy to remove, whereas Windows used to (not sure if it still does) reinstall Microsoft Teams when you uninstalled it.

Edits:

• Added the glitch with background image
• Added more information on my background with Linux, including using it on my laptop

There are currently four computers in my household: a Windows 10 desktop, a Windows 11 laptop, and two additional Linux laptops (those are "mine"). One is a very weak but new machine, basically the cheapest laptop I could buy that was neither Android nor literally a toy. It is running Lubuntu 24.04, and is used largely for writing and light browsing. The other is an older machine running MX Linux. Right now it's single purpose is running my Plex server. Given that setup, transferring files between machines is often a necessity.

Both my desktop computer and my Plex server are connected via Ethernet directly to the router. The other two laptops are connected largely via WIFI, although I do connect my writing laptop via an USB/Ethernet adapter for updates/upgrades and larger downloads when necessary.

Among other things, I often download movies on my Windows 10 desktop computer and then manually transfer them in batches to my Plex external hard-drive, and then to my Plex laptop (when it has enough space, otherwise I just keep the movies on the hard-drive). That is because it is way more convenient for me to (re)search what I wish to wwatch, find and download it to my desktop than it would be the case for my Plex laptop. The laptop is not only in a position that makes it uncomfortable to use but is also very slow even for basic things such as firing up Firefox. I also prefer to do the scraping using MediaElch and while it is a fairly heavy (probably Electron) application, my desktop is powerful enought that it doesn't make any diference. I also use Subsync sometimes, which is, as far a I know, only available as a GUI application on Windows.

Most content I find online is very practical, teaching me how to follow concrete steps to make things work, but I haven't found much advice on which programs or tech "stack" would be adequate for a specific situation such as my own. I just want a robust way to seamlessly transfer file between all the machines on my home without having to plug and unplug hard-disks and flash drives.

Any suggestion? Thanks!