I've recently started taking some IT and programming classes at a local college because I've always been interested in IT as a career but I've never had any sort of professional experience in the field. Are there any skills that I need to definitely know, or any sort of certifications that I can get in order to get my foot in the door and start applying for IT focused jobs?

As someone who is not mainly a web developer, I can barely grasp the immensity of options when it comes to writing a web application.

So far everything I've written has been using PHP and the Slim microframework. PHP because I don't use languages like Python/Ruby/JS that much so I didn't have any prior knowledge of those, and I've found myself to be fairly productive with it. Slim because I didn't want a full-blown framework with 200 files to configure.

I've tried Go because I've used it in the past but I don't see it to be very fit when it comes to websites, I think it's fine for small microservices but doing MVC was a chore, maybe there's a framework out there that solves this.

As for the frontend I've been trying to use as little JavaScript as possible, always vanilla. As of HTML and CSS I'm no designer so I kind of get by copying code and tweaking things here and there.

However I've started a slightly bigger project and I don't fancy myself writing everything from scratch (specially security) besides, ORMs can be useful. Symfony4 is what I've been using for a couple of days, but I've had trouble setting up debugging, and the community/docs don't seem that great since this version is fairly new; so I'm considering trying out something more popular like Django.

So this is why I created the post, I know this will differ greatly depending on the use-case. But I would like to do a quick survey and hear some of your recommendations, both on the backend and frontend. Besides I think it's a good topic for discussion.

Cheers!

I’ve recently gotten to speak with a few folks who work at an enterprise security company. I asked what their security researchers set as company rules for allowed laptops. My one datapoint so far is “Dell or Apple.” So for example, no Thinkpad X1 Carbon, which is arguably the best work laptop.

I am curious what other large security companies (or any of you security minded folks) set as rules for trusted laptops. Can anyone share their lists and theories as to why I heard Dell and Apple? BIOS is more trustworthy?

Blatantly stealing from the excellent post by /u/judah, I figured I'd make a sysadmin version because sysadmins tend to be underrepresented in tech discussions. Please keep your answers as cross-platform as possible without being uselessly generic.

I'll start. Realize that the system is going to go down, and accept that reality. Accept failure. How you respond to failure is how people who aren't sysadmins will see and value you.

Does anyone have any experience working as a contractor in the IT field? I have 4 years of experience in the IT industry, all of it as a full time direct hire. I may have an opportunity to work for a very large company on a 2 year contract at fairly reasonable salary increase. The most important part to me is that I will be getting some experience off of the service desk as well, which I can use to continue my career going forward.

My main concern is that I am unfamiliar with contract work. I do know that I get health benefits / 401k / sick days, but I assume there must be a drawback to being a contractor, right? I feel like being a contractor is inherently more unstable than being an actual hire. The position I am being considered for is a 2 year contract, but I worry that the position could simply disappear a few months in and I'd be out of a job. Is this a fair feeling, and is there any way I can gauge how true this might be for my position? Is there something I could discreetly ask in my interview that might help me understand if this is a stable position?

If anyone has any experience as a contractor, I'd love to hear it.

For my particular use case I share my home PC with my spouse and since I'm the more tech-savvy of the two I'll need to occasionally remote in and help out with some random task. They know enough that the issue will usually be too complex to simply guide over the phone, so remote control it is.

I'm also trying to improve my personal efforts toward privacy and security. To that end I want to avoid closed-source services such as TeamViewer where a breach on their end could compromise my system.

The following is the current state of what I'm now using as I think others may benefit from this as well:

Setup

Web

I use a simple web form as my first authentication. It's just a username and password, but it does require a web host that supports server side code such as PHP. In my case I just created a blank page with nothing other than the form and when successful the page generates a 6 digit PIN and saves it to a text file in a private folder (so no one can simply navigate to it and get the PIN).

I went the text file route because my current hosting plan only allows 1 database and I didn't want to add yet another random table just for this 1 value.

Router

To connect to my home PC I needed to forward a port from my router. I'm going to use VNC as it lets me see what is currently shown on the monitor and work with someone already there so I forward port 5900 as VNC's default port. You can customize this if you want. Some routers allow you to SSH into their system and make changes that way so a step more secure would be to leave the port forward disabled and only enable it once a successful login from the web form is disabled. In my case I'll just leave the port forwarded all the time.

IP Address

To connect to my computer I need to know it's external IP address and for this I use FreeDNS from Afraid.org. My router has dynamic DNS support for them already included so it was easy to plug in my details to generate a URL which will always point to my home PC (well, as long as my router properly sends them my latest IP address). If your router doesn't support the dynamic DNS you choose many also allow either a download or the settings you would need to script your own to keep your IP address up to date with their service.

Signal

Signal is an end-to-end encrypted messenger which supports text, media, phone and video calls. There's also a nifty command line option on Github called Signal-cli which I'm using to provide my second form of authentication. I just downloaded the package, moved to my $PATH (in my case /usr/local/bin) and set it up as described on their README. In my case I have both a normal cell phone number and another number provided by Google Voice. I already use my normal cell phone number with Signal so for this project I used Signal-cli to register a new account using my Google Voice number.

VNC

My home PC runs Ubuntu 18.04 so I'm using x11vnc as my VNC server. Since I'm leaving my port forwarded all the time I most certainly do NOT want to leave VNC also running. That's too large a security risk for me. Instead I've written a short bash script that first checks the web form using curl and https (so it's encrypted) with its own login information to check if any PIN numbers have been saved. If a PIN is found the web server sends that back and then deletes the PIN text file. Meanwhile the bash script uses the PIN to start a VNC session with that PIN as the password and also sends my normal cell the PIN via Signal-cli so that I can login.

I have this script set to run every minute so I'm not waiting long after web login and I also have the x11vnc session set to timeout after a minute so I can quickly connect again should I mess something up. It's also important that x11vnc is set to auto exit after closing the session so that it's not left up for an attacker to attempt to abuse.

System Flow

Once everything is setup and working this is what it's like for me to connect to my home PC:

1. Browse to my web form and login
2. Close web form and wait for Signal message
3. Launch VNC client
4. Connect via dynamic DNS address (saved to VNC client)
5. Enter PIN code
6. Close VNC when done

Code

Here's some snippets to help get you started

PHP for Web Form Processing

<?php
// Variables
$username = 'your_username';
$password = 'your_password_super_long_and_unique';
$filename = 'path_to_private_folder/vnc/pin.txt';

// Process the login form
if($action == 'Login'){
	$file = fopen($filename,'w');
	$passwd = rand(100000,999999);
	fwrite($file,$passwd);
	fclose($file);
	exit('Success');
}

// Process the bash script
if($action == 'bash'){
	if(file_exists($filename)){
		$file = fopen($filename,'r');
		$passwd = fread($file,filesize($filename));
		fclose($filename);
		unlink($filename);
		exit($passwd);
	} else {
		exit('No_PIN');
	}
}
?>

Bash for x11vnc and Signal-cli

# See if x11vnc access has been requested
status=$(curl -s -d "u=your_username&p=your_password_super_long_and_unique&a=bash" https://vnc_web_form.com)

# Exit if nothing has been requested
if [ "$status" = "No_PIN" ]; then
  # No PIN so exit; log the event if you want
  exit 0
fi

# Strip non-numeric characters
num="${status//[!0-9]/}"

# See if they still match (prevent error messages from triggering stuff)
if [ $status != $num ]; then
  # They don't match so probably not a PIN - exit; log it if you want
  exit 1
fi

# Validate pin number
num=$((num + 0))
if [ $num -lt 100000 ]; then
  # PIN wasn't 6 digits so something weird is going on - exit; log it if you want
  exit 1
fi
if [ $num -gt 999999 ]; then
  # Same as before
  exit 1
fi

# Everything is good; start up x11vnc
# Log event if you want

# Get the current IP address - while dynamic DNS is in place this serves as a backup
ip=$(dig +short +timeout=5 myip.opendns.com @resolver1.opendns.com)

# Send IP and password via Signal
# Note that phone number includes country code
# My bash is running as root so I run the command as my local user where I had registered Signal-cli
su -c "signal-cli -u +google_voice_number send -m '$num for $ip' +normal_cell_number" s3rvant

# Status was requested and variable is now the password
# this provides a 1 minute window to connect with 1-time password to control main display
# again run as local user
su -c "x11vnc -timeout 60 -display :0 -passwd $num" s3rvant

Final Thoughts

There are more secure ways to handle this. Some routers support VPN for the connect along with device certificates which are much stronger than a 6 digit PIN code. Dynamically opening and closing the router port as part of the bash script would also be a nice touch. For me this is enough security and is plenty convenient enough to quickly offer tech support (or nab some bash code for articles like this) on the fly.

I'm pretty happy with how Signal-cli has worked out and plan to use it again with my next project (home automation). I'll be sure to post again once I get that ball rolling.

I've been thinking about this but based on the current rulings in the Oracle v. Google court case, it would seem that APIs are indeed copyrightable.

This would mean that Wine would be infringing on Microsoft's copyright of the Windows API and system calls. Of course it wouldn't matter until Microsoft actually does something about it. But as Wine gets better and better and its market share higher and higher, I worry that Microsoft might set their sights on Wine now that they have the law on their side.

The Meta-application layer works by using a number of pre-configured free-to-use web applications such as FB messenger, gmail, skype, gchat, yahoo email, etc to establish a connection and transmit data over top the application layer.

It's purpose is to establish a meta-layer for new applications to make use of, to decrease centralization, and to increase privacy. Take the power back from big corporations, and put it back in with the People! (or some such thing, maybe...).

So each end of the communication would check some pre-configured number of free-online web apps for a code/key from the other side. Once found that key would determine the ordering, frequency, and mediums to use for communication. Such as: gmail - first message, skype - second message, yahoo email - third and forth message, repeat 10x, then reverse order, repeat 10x, and then start over again or better yet some hard-to-discern pattern.

Privacy would be increased through both obscurity (typically not a good way to do security) and through the use of a multitude of different web applications, each with their own varying degrees of security.

The actual messages would be the binary code...or for a more directed-application - text messages... Communication would be slow....but possible?

Anyways, that thought popped into my head so I thought I'd share it in case it took your own brain to any interesting places :)

Hi guys,

I'm really stumped and looking for a nudge in the right direction for how to utilise the ghoneycutt/pam module in puppet. Relatively new to this but got what I'd like to think as most the basics down.

I've configured a few things using modules such as NTP, SSSD and NSSWITCH but I'm just stuck on how I can use this module and pull info from Hiera into it.

So, lets start with

.yaml file:

        ### nsswitch.conf authentication configuration

        nsswitch::passwd:     'files sss'

        nsswitch::shadow:     'files sss'

And then looking at the nsswitch.pp file:

        ### nsswitch.config setup

        class profile::linux::base::nsswitch {

        # Get heira values

          class { 'nsswitch':

            passwd    => [lookup('nsswitch::passwd')],

            shadow    => [lookup('nsswitch::shadow')],

Simple enough to call the values I want and works how I want, now I'm trying to do the same type of thing for PAM using the ghoneycutt/pam module and there doesn't seem to be much info on how to use it, or it's just not sinking in for me.

Some of my PAM Heira values:

        pam::pam_auth_lines:
          - '# Managed by Hiera key pam::pam_auth_lines'
          - 'auth        required      pam_env.so'
          - 'auth        sufficient    pam_fprintd.so'
          - 'auth        sufficient    pam_unix.so nullok try_first_pass'
          - 'auth        requisite     pam_succeed_if.so uid >= 500 quiet'
          - 'auth        sufficient    pam_sss.so use_first_pass'
          - 'auth        required      pam_deny.so'
        pam::pam_account_lines:
          - '# Managed by Hiera key pam::pam_account_lines'
          - 'account     required      pam_unix.so'
          - 'account     sufficient    pam_localuser.so'
          - 'account     sufficient    pam_succeed_if.so uid < 500 quiet'
          - 'account     [default=bad success=ok user_unknown=ignore] pam_sss.so'
          - 'account     required      pam_permit.so'
        pam::pam_password_lines:
          - '# Managed by Hiera key pam::pam_password_lines'
          - 'password    requisite     pam_cracklib.so try_first_pass retry=3 type='
          - 'password    sufficient    pam_unix.so sha512 shadow nullok try_first_pass use_authtok'
          - 'password    sufficient    pam_sss.so use_authtok'
          - 'password    required      pam_deny.so'

Some things I've tried:

1:

        class profile::linux::base::pam {
          # resources
          class { 'pam':
            password-auth-ac  => [
              lookup('pam::pam_auth_lines')],
              lookup('pam::pam_account_lines')],
              lookup('pam::pam_password_lines')],
              lookup('pam::pam_session_lines')],
           }

2:

	
	      passwd  => [
	
	      lookup('pam::pam_auth_lines'),
	
	      lookup('pam::pam_account_lines'),
	
	      lookup('pam::pam_password_lines'),
	
	      lookup('pam::pam_session_lines'),
	
	      ],
	
	  }

        include ::pam

	class profile::linux::base::pam {
	
	  # resources
	
	    include ::pam

	         lookup('pam::pam_auth_lines')
	
	}

I've tried a few other ways and can't get it to work as I want it to. Can anyone help?

Thanks

My pick is Perl5. Even though a lot people (mostly those who’ve never touched Perl) say it’s a “write only” language, I think it does a lot right. It’s easy to prototype with, and it gives you a lot of freedom in how you want to solve a problem; which I think is one of the most important features of a programming language.

I’d like to know what your picks are!

One of the people in an IRC channel I frequent pointed out a site I've been building uses CDNs that are IPv4 only. I never realized this, I just assumed every major provider had deployed IPv6. Oh, how very wrong I was. A quick check of some major (to me) sites shows a shocking lack of IPv6, including:

• Bootstrap (stackpath.bootstrapcdn.com)
• Discord
• FontAwesome (use.fontawesome.com)
• GitHub/GitHub pages
• GitLab/GitLab pages (self-hosted supports IPv6, but officially hosted GitLab only supports IPv4 due to Azure limitations)
• jQuery, IF you use code.jquery.com (some tutorials use ajax.googleapis.com, which does have IPv6, but an unfortunate amount use code.jquery.com, including the getting started page for Bootstrap)
• Parts of Amazon/AWS (Amazon is IPv4 only, some of AWS is IPv4 only, including S3)
• Reddit
• Stack Overflow/Exchange/etc
• Twitter

An honorable mention goes to Angular's websites because the websites themselves are IPv4 only but the libraries are hosted on ajax.googleapis.com, which is IPv6 accessible. I checked npm, PyPI, RubyGems, and Tildes, and they all support IPv6.

I can understand why companies like Amazon have partial support (upgrading can be a PITA if you're a cloud service provider with uptime requirements), but then you have services like Discord (launched in 2015 with no obligation to maintain service) that only support IPv4. At the very least, I'd expect CDNs referenced by thousands (if not millions) of webpages to be on IPv6 by now.

Am I missing something? CDNs are pretty static, it's just a matter of choosing one that supports IPv6, you don't even need to update your application if you just change the DNS entries.