Hey everyone,

I’m currently running Schwalbe G-One Bite 40mm and I’m thinking about moving up to 50mm for a bit more confidence off-road. Where I ride it’s not groomed gravel or proper official well-kept MTB trails, just typical unmaintained forest trails: holes, roots, loose rocks everywhere, some of them golf-ball sized. On descents, it feels pretty sketchy with the 40s.

The problem is, I don’t have long stretches of continuous/unbroken nature. It’s more like short nature pockets in between civilization so, I still need to transverse a few roads (tarmac and cobbles). So I’m trying to find something that’s still reasonably fast rolling on road. I was hoping to find something up to 20 watts of rolling resistance. I think I saw somewhere that my tires are around 25 watts, so some improvement in this area would also be nice.

I started investigating tires on bicyclerollingresistance.com website and started looking at measured knob height (center and edge), trying to pick something with more bite than what I have now. But the more I read, the more I see people saying knob height alone doesn’t mean much and tread pattern matters more. At this point I’m not even sure what I should be looking for.

These are the ones I’ve selected for the moment:

• Schwalbe G-One R Pro 50
• Schwalbe G-One RX Pro 50
• Schwalbe G-One Overland Super Ground SpeedGrip 50

Alternatives slightly above 20 watts:

• Continental Race King Performance ShieldWall 50
• Pirelli Gravel M (tested in 45mm, but there’s a 50mm version too; hopefully they perform similarly)

Maybe other brands or models I should be considering that aren’t on BRR?

But honestly… I don’t really know what I’m doing. I started by filtering by wattage and knob height, but it seems the tread design or compounds are even more important.

So, in conclusion, what I’m after is:

• More confidence on rough, loose forest descents (I'm not doing jumps. Let's say, more like XC)
• 50mm volume
• Still decent on road sections
• Not feeling like I’m dragging an anchor on pavement

If anyone has experience with these in real, messy forest conditions (not nice smooth gravel), I’d appreciate some advice and recommendations. What should I actually be looking at when choosing?

Thanks in advance!

So I've been out of the loop on camping and, more generally, outdoorsy stuff beyond day hikes for a good couple of years now. In my absence, it seems like a large chunk of the manufacturers I used to rely on for flashlights and headlamps (Black Diamond, Petzl, Fenix, etc.) have switched over to lithium batteries, many to USB chargeable internal batteries.

That feels weird to me, coming from the era of "carry a couple of spare double and triple A's with you", since you only needed a few of one or the other to keep all your lights going, even on a longer trip. Given that everyone's doing it now, though, I'm assuming it works out fine.

Anyone have recs on what brands are good these days, what models, and how to buy to maximize the "keep all your lights going with the least backup energy sources" factor?

I've started to look into getting a 3D printer mainly for printing minis and terrain for TTRPGs. For the aficionado and print quality the best printer type seem to be resin based printers, but I don't think I'd be able to deal with the toxic fumes in a safe manner. As such I've settled on looking at filament based printers and I don't really need super high fidelity prints.

I need one that works well with Linux and preferably OSS. I am willing to pay for closed source software (or OSS) if it runs on well on Linux. So if you know of any software that is easy to get started with I'd be happy to hear about it. If you know of any models or makes that I should avoid I'd also appreciate a heads up!

Any other advice for someone just getting started with 3D printing?

I recently got my first vinyl (Breach by Twenty One Pilots) for my birthday. I've had it on streaming nonstop but want to play it properly and start a small collection.

I've seen a lot of recommendations for the Audio-Technica AT-LP60 as a beginner option (affordable and apparently decent quality) but also read that spending a little more can get something more "serious", though I need speakers too.

The thing is that it needs to be new gear only or easy to buy: My partner plans to gift the setup for Christmas and marketplace/used gear is hard to source locally where we live, so that's probably out. We have a budget of around €150 for the turntable and other €150 for the speakers, or €300 total. Open to a modest stretch if it avoids an early upgrade. Manual or semi-auto is fine but preferable plug-and-play.

Prefer compact powered speakers with good near field clarity, not necessarily loud since they'll sit behind my PC monitor on my desk.

Questions:

• If I'm considering the AT-LP60, what's the smartest "slightly more €" upgrade path for a first set-up?

• For small desks, which powered speakers pair well with entry-level turntables (good clarity but not boomy)?

• Anything to avoid or other advice you may have for a beginner?

Appreciate any guidance. I’m looking forward to spinning Breach and building out a few more records.

Ps: Already ordered anti-static inner sleeves, outer sleeves, and a carbon-fiber record brush to keep things clean!

I need a new place to buy electronic components and some mildly niche circuits/products that's not Amazon. I'm currently looking for an adjustable temp fan controller for an indoor green house. It's sitting in front of a Window on a shelf covered in plastic. I want to add a 12v dc fan to the top to turn on when gets somewhere around 90 degrees farenheit.
I used to use parts-express.com, but it looks like they mostly just do audio now. Does anyone have any good recommendations for purchasing things like this in the USA.

I'm a US citizen living in Berlin, and I'm currently back in the US (Northeast Ohio specifically) for a family wedding. We've got a lot of extra room in our suitcases, so I want to bring stuff back that's hard(er) to get ahold of in Germany. I figured this is a good place to ask for any recommendations from others who live in Europe or have experience traveling!

As an example, here are some of the common recs I've seen in threads on r/germany:

• bulk OTC meds like aspirin and tylenol (not hard to find in Germany but cheaper in the US)
• brown sugar
• double-acting baking powder
• Frank's red hot sauce (maybe other hot sauce as well, Germans are not a spicy people)
• Ranch dressing (I've heard the powdered kind is better bc it's easier to pack?)
• Adobo seasoning (probably other Latin American ingredients too but this one specifically is a must-buy even for my white ass)
• specific brands of candies & junk food not available in Germany (though ime this category is the easiest to find at US-themed international stores, albeit at high prices)
• Levi's jeans for some reason (I don't really get this one tbh but I always see Germans saying it in threads)

I know for sure I'll get home and immediately regret not having purchased something. Anyone with experience traveling between these two continents, please let me know if you think of something missing from this list!