I have a personal website, and while I don't mind it showing up in SERPs for DuckDuckGo, Bing, etc. I do not want it showing up on Google at all.

Google doesn't send traffic my way, I pay for my site out of my salary from my day job instead of running ads, and preventing Google from indexing my site seems like the best form of nonviolent direct action I can take to protest their continuing dominance and their "embrace, extend, and extinguish" campaign against the Web.

I figure the easiest way to do this is to add the following to my site's .htaccess file since I don't have access to the server config file:

X-Robots-Tag: googlebot: none, noarchive, nosnippet, notranslate, noimageindex

Are there any downsides that I should know about besides not showing up in Google results?

I have been running a DAKBoard on a Raspberry Pi 4 for almost 4 years now without any problems until recently following this guide IIRC.

About 2 weeks ago, DAKBoard started logging itself out and only shows a black screen with the time on it and the DAK logo in the lower right corner. If I go into the settings it will bring up the DAK page that shows I am not logged in. When I log in again it seems to work randomly for about 24-36 hours.

I'm running it in a kiosk mode browser on Raspberry Pi OS. I am using the free tier of DAKBoard.

Before I wipe the SD card and start over from scratch I was wondering if there were any suggestions? To be completely honest, it has been "set and forget" for the past number of years so I would like to make sure I'm not overlooking something pretty basic/easy.

On a side note: Has anyone had any experiense using the DAKBoard OS on a Pi? I don't remember it being an option when I set it up originally.

Thank you for any assistance and if you have any spare hardware laying around I'd highly recommend setting one up, my family finds it incredibly useful for the calendar function and a conversation piece when they notice different photos rotating in and out.

Hi
With this LITE site ---> https://lite.duckduckgo.com/lite/
There isn't the Dark Theme that's available for original duckduckgo site.

I found a "My filters" rule on the web.

Add these two lines to My filters

lite.duckduckgo.com##html:style(color: rgb(141, 141, 141) !important; background: none repeat scroll 0 0 rgb(48, 48, 48) !important; font-family: 'Helvetica Neue','Segoe UI', Arial, sans-serif;)

lite.duckduckgo.com##a:style(color: rgb(201, 201, 201) !important;)

When the rule is used the search homepage looks reasonable.
And the search results...
The black background is not very black, not as black as Tildes black theme.
I can live with that.

But the red text under each result is very muddy.
Can that be improved?
Make it brighter Crimson or even Orange would look better.

So... a friend did this for me a long time ago, but I've replaced my computer since then, and I don't know how to do it for myself.

I know how to find the MAME executable. I don't know whether I need to download the .exe file or the .zip file, but I assume the .exe file is the better option.

I know how to run an executable file, and I'm assuming it installs itself.

I know how to find a copy of the antique video game I want.

However...

The .zip file I download for the game contains a lot of files with names like "a26-13.109" - and I don't know what I'm supposed to do with those, to get them inside the MAME and make the game playable.

I'm running Windows 10 on a 64-bit operating system, if that's relevant.

Is anyone feeling charitable and willing to help someone who's not computer literate to do this?

I have a CalDigit TS3+ dock that I switch between my M1 Macbook Pro and a System76 Galago Pro that's currently running Windows 10 (I'm sorry, FOSS gods). The M1 has no problem using the TS3+ when it's connected or disconnected and reconnected. But the Galago Pro will only connect to the dock if it was connected while booting up. Disconnecting and reconnecting leaves the dock in a state where only the pass-through thunderbolt port works. So my monitor that uses the pass-through for DisplayPort can operate after reconnecting the dock, but no other devices plugged into the dock will. My mouse/keyboard for example don't even receive power in this state.

Oddly when setting up the drivers for thunderbolt I found that the only drivers available are for Intel's NUCs. IIRC someone on reddit said that this is actually the software I need to install, so that's what I did.

Any help getting the dock to work better is appreciated! Currently I need to reboot the laptop every time I switch back from the M1 to the Galago Pro.

In the DC canon, The Mobius Chair is a time-space/dimensional vehicle operated by the New God Metron. It allows him to travel and observe the universe, but the one I'm making is nowhere near as functional.

I've come into a recliner chair with a cupholder on each armrest, and I already had a split keyboard. My plan is to use the cupholders as a mount for both ends of the split keyboard, so that I could use the entire run of armrest and have my hands lay naturally on the keys. Goals are to minimize weird stretching and be able to comfortably type for long stretches of time, to put off stuff building this that I planned to work on this weekend, and to look super boss, though not necessarily in that order.

If I want ultimate angulation and the best range of motion, I was thinking about something like a cupholder with a phone or a tablet mount, like this one, but if anyone has recommendations for what would be best to work with, or have done something like this before, I'm all ears.

I'm trying to package Elmer for use with NixOS, and could use some help from any experienced Nix users. My current attempt is located here. There is some junk left around in that file from my experimenting, but it's at least a start. There are also a few lines of error included in the comment here.

Any help is appreciated!

I have just graduated from uni, and am preparing for masters next fall. I'm a humanities student, but have some programming knowledge. Currently I'm looking for literary translation jobs, but should I fail that, I want to find some light freelance work (so that I can spare more time to my studies), and looking at e.g. freelancer.com, Wordpress is still quite popular.

What are some good introductory material for Wordpress and PHP, that preferably does not assume total beginner to programming? How much can I expect to make, for how much effort? I'd be content if I could make $200-250 w/ 3-5hr work per day, or a couple full days a week, that's all I really need and such hours would mean that I could keep on doing such work even when I'm writing my thesis. I'm in Turkey, FWIW.

Hi, I need your help to learn pentesting.

I'm programming for several years. I'm really good in C# and can write moderately complex apps in Dart, Python and JavaScript. I'm in highschool and work for software development company as backend developer. But general programming starts to feel so boring...

I've started to watch LiveOverflow on youtube (no link, there is no wifi here and I don't want youtube to drain my data) and it was so interesting - so I tried it. I've tried few CTFs, read many writeups, and now I've discovered CTF hack the box.

When I know what to do, I have no problem googling and researching and later applying my knowledge. But I often discover, that I just don't know what I don't know.

There is one CTF challenge that I haven't completed yet. It's 20 line html page, no javascript, nothing suspicous. No cookies. It has just form with password input, which sends post request to server. Here's the problem - how do I get the flag (the password)? I can bruteforce it, but it clearly isn't the correct way. I know that the php runs on apache, debian. I've tried getting some files, I've tried going up (../), sql injection, nothing works.

And here's the general problem - what am I missing? What to learn? What should I google? I don't want ideas what I'm missing on this one example - Instead I need some sources where I learn generally about vulnerabilities I can exploit. Some blog, some website, something like this.

Could someone here recommend me some sources where I learn about this? How did you start and what things do you generally check when you face something you have to break into?

Thank you

I've just used Tildes on my phone for the first time and FUCK! MY EYES! I know I can't change the color of Safari, so I looked in the app store but couldn't find anything. Can you reccomend me a good browser with a dark theme?

Hello everyone. I consider myself fairly competent when it comes to my work with LaTeX, but as everyone who uses it knows, it is definetely strange sometimes. And right now I have a problem which just irks me in the wrong ways:

I use XeTeX and a number of custom fonts for my documents, but when writing mathematical formulas I found out that the font I set for Greek letters (Gentium Plus) is used for letter commands like \alpha, \Alpha, ... but not for commands like \sum, \prod. As you can see in this example here. You can see XeTeX defaults to Computer Modern.

I've looked all over the net for solutions but I can't find one. I'm using mathspec, amsmath, amsfonts, amssymb as my font related packages and I set my fonts like this:

\setmainfont{Charis SIL}
\setsansfont{Helvetica Now Display}
\setmonofont[Scale=MatchLowercase]{Fira Code Retina}
\setmathfont(Digits,Latin){Charis SIL}
\setmathfont(Greek){Gentium Plus}

I feel like I'm going insane not solving this problem. Should you require it, my entire LaTeX template is here on Github. Please help, thank you.

I currently have a Lenovo N42 Chromebook far past it's EoL, for which Google is no longer supporting it. I have put Chrome OS Flex on it by reflashing the bios, and it's pretty solid, but I have no internal audio. Bluetooth audio and HDMI works fine, but no headphones, and no speakers.

I found this solution for trying to hack in an Alsa configuration from an Ubuntu Live Disk (https://www.reddit.com/r/chromeos/comments/swzxsy/comment/irk5kqk/) and I was able to follow the instructions and enable development mode, but when I try to run the alsaconfig script, I get this.

crosh> shell
chronos@localhost / $ sudo alsarestore
No state is present for card chtrt5650
/usr/sbin/alsactl: sysfs_init:48: sysfs path '/sys' is invalid

Found hardware: "chtrt5650" "" "" "" ""
Hardware is initialized using a generic method
No state is present for card chtrt5650

It may have something to do with those instructions being for a different build computer, but I am outside my sphere of knowledge, and anything else I could troubleshoot would be appreciated. Internal audio isn't mission critical for me, but it would be appreciated.

How does Mullvad removing port forwarding affect an Unraid setup using deluge-vpn container?

I don’t access my server from outside my network and just use a basic binhex deluge-vpn docker setup. Any issues I’ll have here?

Currently out of town and won’t be back until after this change happens tomorrow. Curious what to expect when I'm back home.