I currently dual-boot Arch and Windows and just use the Windows EFI partition in Arch as well, however I only have about 13 MB of space left on it.

I’d like to try installing Gentoo on an extra SSD I have with nothing on it, but don’t really want to have a second EFI partition if I can avoid it.

So my question is, can I shrink the Windows main partition towards the right and expand the the Windows EFI partition into the newly freed space?

Looking at the available options, I see many programs such as Ardour and Audacity that seems to focus on recording, mixing, streaming, etc. But what should use it to actually edit the thing?

By that I mean changing the order of things, removing silences, involuntary sounds, and noises, adding music and sound effects, as well as making what I'm saying more concise and intelligible.

I have a background in video editing, and I'm used to working in the "timeline paradigm" that is common to Adobe Premiere and older versions of Final Cut (I have no idea what Final Cut looks like now...). But I have no idea how to edit stuff using actual audio software, I've only used those to treat audio and then finish editing on other programs.

I'd use a video editor for that, but I currently don't own any machine powerful enough to use a video editor software comfortably.

I've been using Tbird since forever, the past 6-7 years on Linux (Debian/Ubuntu downstreams). A couple years ago, I think during the 68-71 release cycle, there were are lot of panicky blogs about "don't upgrade; the new Tbird will irrevocably screw up your Contacts/Calendar/Other Plug-ins", I may even have tried it and experienced issues myself (I don't recall) ... and as a result, I've held my copy at the 60.something release since then.

Now the 91 update has been out and stable for awhile, and a major overhaul upgrade to 102 is in the offing ... and I'm looking for feedback ... is it safe to upgrade? Might I still hit breaking issues? Or was it always safe?

Final update: See here.

Update: Thank you ALL for your valuable feedback. I'm definitely looking into refurbished models now and I have a lot better grasp on what what I should be considering. I'm going to do some digging and a ridiculous amount of overshopping over the next couple of days, and then I'll let you all know what my final pick is!

Hey techy Tildes! I'm back with another support request from you knowledgeable and helpful folks.

I need a laptop that does exactly three things: gets me online, displays PDFs, and runs office software. I have a large number of online courses that I have to take in the coming years, and I need something that I can just grab while on my couch or in bed to work on papers and assignments, hence the 13" size preference. Long battery life would be highly preferable.

I looked for options that come with Linux preinstalled, but there's really nothing available that hits what I'm looking for -- there isn't much of a market for 13". As such, my plan is to just buy a standard Windows laptop and then put Linux on it, but I have no idea which particular hardware will play nice with a Linux installation. Budget would be sub-$500 (if possible). I don't need the laptop to do anything other than stay on for a long time and let me type, so I have no need for a powerhouse.

Can anyone point me in the right direction with some recommendations?

Hello everyone,

This will be a long post because I want to give my post the proper context. I apologize in advance for taking your time.

About five months ago, with the help of relatively high ceiling of Windows 11's system requirements, I finally pushed myself to use Linux exclusively on my desktop. It was a decision between using Windows LTSC or Linux and I went with the better long term option.

I am not a programmer but I'm also not unfamiliar with the Linux world. I believe I've used one distro or another on a spare computer for shorts period of time since at least 2008. But those use cases have always been to satisfy the curious side of my brain as I am always interested in technology. So after installing distros ranging from Ubuntu to Arch, my curiosity waned enough to never look deeper into how these systems work. They were, after all, a hobby project on a spare computer that was often gathering dust.

When I decided to switch exclusively to Linux, the next decision I had to make was to pick a distro. Naturally, I looked for the established players first. Ubuntu was the obvious choice because it has long been the distro for newbies and there are a lot of guides on the internet if I ever needed help, which was inevitable. But then I read about snaps and thought that was a deal breaker. I was moving to Linux specifically because I don't want things shoved down my throat. I had no intention to relive that¹.

So Ubuntu was a no go, but I was certain I wanted a Debian based distro as their support and software availability was unmatched, maybe save for Arch². At this point, why not Debian right? It's known for being rock solid and it's Debian itself, not some derivation. Well, because I had various issues with Debian before. These issues were always fundamental and not very specific too, so I didn't want to risk wasting a lot of time fixing things I didn't understand, only for them to break again after a couple of days. Then I came across Pop!_OS, which seemed like a perfect fit. It was Ubuntu without its worst parts, came with Nvidia drivers and it had a company behind it that seemed to be committed to Linux. I installed it and everything just worked. I had zero issues.

But then I started getting that FOMO itch again. GNOME 42 was out and it looked great, but Pop!_OS was two versions behind. I also found out that they're working on their own DE, which might end up being great (it looked nice) but I didn't want to leave an established player like GNOME behind, including all the benefits you get from its wonderful extensions. I started looking for other distos again and Fedora caught my eye. I was obviously aware of Fedora, I even used it once back when YUM was still a thing, but it didn't leave a lasting impression on me. The fact that it wasn't a Debian based distro was also a disadvantage because that meant something different and at this stage of dipping my toes into Linux, I didn't think different might be the best way to go for me. Still, despite my best judgment, I installed Fedora on a USB and used it live. When my gut feeling was confirmed by my research about how Fedora leaves things as stock as possible and is ahead of the curve in terms of upcoming technology (btrfs, PulseAudio, Wayland et al.³) without sacrificing on stability, I was hooked.

After renewing my Timeshift backup, I formatted my Pop!_OS system and installed Fedora. The installation process could use a facelift, but it handled everything perfectly. I didn't even have some of the issues I had with Pop!_OS right after installation. It was literally problem free. I'm now on day #3 of using Fedora and the experience remains the same. The only issue I had to deal with was trying to get Timeshift to work (apparently it doesn't play nice with btrfs on Fedora), but instead of wasting my time with that, I just installed Déjà Dup and I'm good to go again. Barring any drastic issues, I don't plan on changing my distro again.

Now, onto my plea for guidance.

I'm looking for comprehensive resources that will teach me how Linux works under the hood. Considering my non-programming background, I'd appreciate it if the language is approachable. The reason why I want this, for one thing, is to learn more about the system I'm planning to use probably for the rest of my life (in tandem with macOS) but also, I want to do some cool stuff Linux allows users to do.

Just to give a quick example. Yesterday, I installed Rofi, which is, besides many other things, an app launcher. I got it to work just fine, I even got a configuration of my own with a theme of my choosing, but when it comes to using some scripts, I just couldn't do it. Every video I watched on YouTube told me how easy it is to use scripts with it as if it's a self-explanatory thing, but I was simply clueless. There was a lot of lingo thrown around like environment variables, setting up $PATH, making the scripts executable with chmod etc. I have very little knowledge of these things. I want to learn what they are, why they exist, and how they all tie together. I want to learn how /etc/ is different than /usr/ and the difference between X11 and some DE (or if they're even in the same category of things). Now, at the risk of sounding impatient and maybe even worse, I also don't want to go way too deep into these things. I am not, after all, trying to become a kernel developer. I just want to be better informed.

There are a lot of information on the internet but most of this information is scattered and out of context. If I try to learn more about one thing, I'm bombarded about other things that I don't know, so in the end I learn nothing. In short, I'm looking for a comprehensive, entry level video series or a book about Linux written in an easy to understand language that assumes no prior knowledge.

Additionally, I'd appreciate any website, YouTube channel and what have you to keep up with recent developments in Linux. I already found a couple as there are plenty of them, but I'd like to learn more about how people here keep up with this fast changing environment.

Thank you for reading and sorry for being so verbose! 😊

^{1: I know you can remove snaps, but I didn't want to deal with the hassle of any possible issues deleting a core system functionally might bring about.
2: Despite finding its approach fascinating, I had no intention to get into Arch because it's a rolling distro and I didn't want an advanced system that can break at any moment in the hands of a novice like myself.
3: To be clear, I don't know how most of these technologies are better than alternatives, but the Linux community at large seems to think they're drastically better than alternatives and are the future.}

A project I'm working on requires me to cover a bit of comedy targeting Lennart Poettering as it's tangentially related, and I'd like to have more context even though it's not strictly necessary. I'm a nontechnical Linux user who used the OS before systemd came around, but really the only impact on my life it's had is that I occasionally use systemctl to control services.

Though I wasn't paying as much attention to the community around the time major distributions switched, I've been casually exposed to criticism of it ever since I came back, and I'd like to make sense of it all and form an opinion beyond "I like Fedora and GNOME and it seems to go hand-in-hand with those". I've read The Biggest Myths, the Wikipedia article, some stuff on freedesktop.org, and of course absorbed the venom slung back and forth over systemd in every FOSS community, but it's hard to get a full picture. And a picture from 2022, for that matter, as a lot of this information comes from its early days. Help me out?

Alright, so I fell down a rabbit hole of trying to understand a whole bunch of techy things that I don't fully understand and could use some help:

What I'm looking for: a pair of Bluetooth wireless earbuds that I can pair with my computer, with low enough latency that it won't impair my enjoyment in casual gaming/video watching

What I understand so far: Almost nothing. 😔 I get that Bluetooth will always have some level of latency, but, beyond that, I've got nothing. I'm so confused.

There are lots of different versions of Bluetooth, and then there are different Bluetooth protocols within that, and then different audio codecs, and each piece of hardware seems to support completely different combinations of those, and I'm not sure if the devices have to match configurations or even how to figure out what my computer supports? It seems Bluetooth will gracefully fall back to worse codecs/protocols if better ones are incompatible, but I don't really want to buy something that's just going to fall back to its worst usecase.

I also don't know what's an "acceptable" level of latency. What's reasonable versus what's intolerable?

It also seems like the information I read online is subject to rapid decay. I read a bunch of stuff only a few years old saying I should look for aptX Low Latency capability, but then I read very recent posts saying that's dead and to go with aptX Adaptive instead. Meanwhile there are a handful of gaming-focused headsets that say they're low latency but don't really say how (e.g. Razer's Hammerhead). And some, like Samsung's buds, having a "gaming mode" but it only works on special hardware.

Also, how do I know what my computer itself will support? Is there anything I can do from the computer side to reduce latency, or is that strictly a function of what my hardware supports and which earbuds I buy?

My usecase:

My computer is a System 76 Oryx Pro (5) running Pop!_OS 21.10. I think its Bluetooth adapter is version 5.1 (though I'm not confident on that). I do not know which protocols/codecs it supports, nor how to find that out.

Audio quality isn't too important. These will be for everyday video-watching and gaming, which is what's prompting the latency requirement. I'd rather them be responsive than rich.

Active noise cancelling would be nice to have (especially if it has a toggleable transparency mode), but I don't know if ANC adds latency and is therefore incompatible with what I'm wanting.

I don't have a specific budget for it, and that's honestly the least important requirement. If the solution exists I'm fine paying for it (within reason, of course). These will end up getting used for thousands of hours, so even a big price difference upfront will even out over time.

I'd appreciate any help anyone can offer in pointing me in the right direction on this!

I've got a 2TB Toshiba drive (formatted as NTFS) that has become very slow and I was wondering if anyone here as any ideas what the problem could be and how I could fix it. All the data I'd need off the drive is backed up, but I would at least like a drive to put it back on to!

In short, it became slow after I had to force power-off the system it was connected to (Pop OS installed on another external drive which I unplugged by mistake) and I haven't bothered to try to fix it in the six months since.

I've tested it on Pop and it takes about 10-20 minutes to mount, and 2 minutes to unmount and safely remove. The data itself seems fine but performance is slow, accessing a 20MB image takes several seconds and selecting the drive in GNOME Disks caused it to freeze.

The drive sounded louder than normal, especially after plugging in.

On Windows, the drive was recognised and browsable immediately, but browsing through folders was very slow - opening some folders causes Windows Explorer to freeze for a while. Some of my double-clicks were mis-recognised as click-to-rename, which took several seconds to activate and during which time Task Manager reported the average response time between 5000 and 11000 ms.

Attempting to load an audio file resulted in lots of buffering. Task Manager reports an active time of 100% (even when not loading files or folders) and the activity never exceeded 100 KB/s (and doesn't sustain it for more than a second). Ejecting the drive takes forever - after ejecting it using the tray icon, the tray icon is not removed (even though there are no other drives connected or listed) and the active time is still 100% with the indicator LED blinking non-stop. The system did not enter sleep right away after me asking it to either.

All of that to say, does anyone know what the issue could be, or how I could find and fix it? Thanks!

Edit: fixed and normal functionality restored (at least so I can check the drive a bit easier) using Scan & Repair in Windows (see my comment).

Last time I owned an inkjet was well over a decade ago. I had a nice HP color laserjet that Just Worked™for almost a decade (and PS, I bought it used), and then I just lived w/o a printer for the past 3-4 years. Now, I'm window-shopping for inkjets, it sounds like the whole "use-our-ink-or-die" business model has only gotten worse.

Are there any good inkjet printers where I can just use it like a normal printer, just buy ink (cheaper than the printer was) when I need it, yada? Or should I just write off the entire industry (again), and go straight to the laser printers?

And does anyone actually have a decent (color, all-in-one) printer that works reasonably well with their (YourDistroHere) Linux machine?

Danke

ETA: Thanks for all the feedback. I'm now prioritizing a Brother laser (maybe just mono), or possibly an Epson Ecotank.

Side-note ... how cool is it that we have so many Linux-folk in our midst!?

Thanks again.

I’m enough of a Linux lay user that I’m not even sure if I’m using the right terminology in the question (feel free to tweak it if needed!). Here’s what I mean:

I’m running Pop!_OS currently, and I have at least one app installed via each of the following methods:

• Deb app from the distro repositories
• Deb deb downloaded from program website
• Flatpak app downloaded from Flathub
• AppImage app downloaded from program website
• Snap app downloaded from the Snap store

As someone who doesn’t really know or necessarily even care to know what’s going on under the hood, these all pretty much work identically for me (with the exception of AppImage which doesn’t integrate into my regular programs menu, and the standalone Deb, which requires manual updating). In fact, for most of the programs on my computer I couldn’t tell you which one they’re sourced from. They all just run like they should.

I’ve looked up differences between all of the options and usually end up finding conversations that go well above my head and get deep into technical details. My question here is basically aimed at cutting through a lot of that depth: what is the important, need-to-know information about these different methods of installing apps? Is there anything I should be aware of if all I’m really going to be doing is running them as a standard, non-power user? Also, if an app is available via multiple methods — is there one that is preferred/better/safer/superior/etc.?

Hey Tildes!

I need some help with a specific tech issue, and I'm sure someone here can help me do it way quicker than I would be able to on my own.

General Request

I'd like to be able to scan a directory and find all of the largest files of a specific type (e.g. the largest .jpg files). I'm running Pop!_OS and I'm assuming there's some way to do this in the terminal, or alternately some utility I could use.

More Specific Details

I'm cleaning up my digital music library, and I realized in setting it up I made some errors by saving some very high res cover art. Many of my Bandcamp purchases come with a cover.jpg or cover.png file that is several megabytes large. I made the mistake of writing these into the files (adding, for some albums, an extra, say, 100 MB across all tracks). They also take a lot longer to load when I pull them up in my cloud music player. I'd like to be able to identify the albums with the largest cover.* files so that I can go in and replace the album art with a lower res version and gain back all that wasted space lost to unnecessary duplication.

I could go folder by folder and take a look at the sizes of each, but I figure there's an easier way to surface the ones that need my attention. Everything I've looked at online so far has helped me figure out how to identify the biggest files in general, but all that will do is surface the actual audio files, when it's the cover art that needs the specific attention.

Also, in case it's necessary information, the directory structure is Music/[artist]/[album]/cover.*

Any help will be very appreciated!

Ubuntu has this package installed by default:
network-manager-config-connectivity-ubuntu

It's only purpose is to provide settings for NetworkManager to send requests to connectivity-check.ubuntu.com , and based on the result (AFAIK) detect redirection by captive portals and open an ISP's page (think public WiFi, or hotel rooms, where you need to authorize to access the net).

Well, connectivity-check.ubuntu.com is hosted on Google cloud (you can check that by running:

dig connectivity-check.ubuntu.com
whois [the IP from previous query]

), so by default Ubuntu sends requests to a Google cloud page.
I don't say Google counts daily active Ubuntu users (because many of those have the same IP), or that Google actively logs and analyzes that data. But some of you guys may not like that behavior.

So what's the fix?

Purge the package

sudo apt purge network-manager-config-connectivity-ubuntu

If you do need a captive portal detection, create your own config file to query some HTTP (not HTTPS) page of your choice, in the example below I have a Debian page used for the same purpose. Use your favorite text editor to create and edit /etc/NetworkManager/conf.d/90-connectivity-custom.conf :

[connectivity]
uri=http://network-test.debian.org/nm

Restart NetworkManager

sudo systemctl restart NetworkManager

If you run an Ubuntu derivative, please report if you have network-manager-config-connectivity-ubuntu installed in the comments.