Introduction

I wanna say that I made several corrections, additions, and improvements just because I love you guys way more than I love the people at Reddit

• Please note that I'm merely a dedicated Linux user, I'm speaking from that point of view. I'm not a developer and not a programmer. These are just my opinions of 10+ years using Linux

• These are just some commentaries from a dude who happen to love the concept of STABILITY in general (autism represent) and would like to discuss how it works when it comes to Linux distributions. This is all based on my use-cases and on what I think is common sense. I have no knowledge of how open-source projects really work, and make no claims regarding how they should work.

• Only distributions that claim to be stable are under my scope. So Arch and Debian Unstable are clearly out the scope, but Slackware, CentOS, Debian Buster, and MX-Linux are clearly under the scope.

• All considerations are void if the malfunctioning is SOLELY a product of hardware, extremely rare conditions or your own lack of knowledge.

• Except when otherwise noted, non-compliance means the distribution is deemed not stable.

1 Deal Breakers

After a correct installation by the user on hardware that is expressly supported by the developers, a stable distribution should, in the period of 1 year (counted from the first boot):

1. Remains bootable, manageable and fully accessible.
2. Work with almost no maintenance or intervention (updates excluded)
3. Present no decrease in performance
4. Freeze at most once every two weeks
5. Have no package issue that cannot be solved by a simple command from its own package manager

2 Major Issues

Because of the complex nature of major issues, I'm not going to establish any criteria about them. Both stable and unstable distributions have critical problems that cannot have a fixed time-frame.

3 Minor Issues/Bugs/Annoyances/etc

Small issues are the ones that do not impede the usage of the machine, but provoke significant annoyances:

Examples:

1. Window switching is not working properly
2. The mouse stops working for 3 seconds every 15 minutes
3. For some reason, the letter "c" is sending "h" on the terminal
4. My configurations are not saved after reboot
5. My configurations are not being saved at all
6. I must change video output manually every time I switch monitors
7. I must change audio output manually every time I switch monitors
8. Some essential configuration is ridiculously hard to find
9. Configurations have no undo button
10. Configurations have no reset button
11. A certain package cannot be installed
12. A certain dependence cannot be installed (dependency hell)
13. There's a ridiculously accessible keyboard shortcut that makes your keyboard change layouts all the fucking time

3.1 Places for Research

Such minor issues must be solved within 30 days, as long as the user does their part and seek some of the following resources:

1. Google
2. Official websites
3. Official forums
4. Official warnings, newsletters, etc
5. Semi-official communities
6. FAQs
7. Manuals
8. Github Issues
9. Gitlab Issues
10. Other Venues to post issues

If the minor issue is not solved in 45+ days, the distribution will be deemed not stable, regardless of the behavior of the user.

4. Conclusion

It is my opinion that, if any of the major and minor requirements are not fulfilled according to their particular rules, the distribution in question should not be deemed not Stable.

So, I've been going through Project Euler and solving problems as a way to brush up on my programming abilities, but it's mostly a math-focused set of problems. Which is cool..they're nice little puzzles that get the gears turning...

BUT I'm wondering if anyone here has suggestions for a website/course that teaches software design in a piece-wise way. Like... each problem is a nugget of software design that builds off previous problems and eventually you're creating an entire application utilizing different algorithms/design patterns/data structures/etc.

I'd appreciate any resources similar to that idea. Thanks!

I currently have a personal "portfolio" site that I haven't updated in close to a year. I'm planning now on revamping it, and I am using this opportunity to reconsider the static site generator I am using.

I host my site on Github pages, which means that Jekyll was originally very appealing due to its nice integration with Github. However, I have found it difficult to greatly customize the themes I find, and I'm the type of person that likes to get everything "just right". It seems like Hugo might be more extensible in this regard, but I'm not sure if that alone makes it worth the switch from my current setup. Anecdotally, a lot of the blogs I find whose layouts I really like tend to use Hugo.

Pure HTML/CSS is an option but that seems like a big overhead for what I want. I'm no web developer and I don't plan on becoming one.

I found my grandfathers old PC on the attic and want to revive it for him. He really loved that pc. Sadly that potato barely runs Windows xp so I thought about putting a Linux onto it. My Linux experience is limited to Mimt and Debian, both way to heavy for this old laptop. I need recommendations for a very light weight Linux Distro!

Specs:
256 mb DDR1 Ram
Intel Celeron M 320 @ 1.4GhZ
40gb Hard Drive

It's a small, simple gift and nothing where I want to put money into. Also it won't be my granddads daily driver so please don't recommend me a new one (a lot of people did that on other websites so I am rather careful). Thanks in Advance!

I've got a smaller desk with two monitor arms -- one with a monitor (left side, different system) and one with a VESA mounted tray for my macbook pro (late 2013 15".)

I'm going to be adding a 1440p monitor from the macbook pro, but I'm short on desk space. Instead of having the laptop on the tray normally, if I lay it lid down with the laptop portion up, the laptop base could sit behind the new monitor with the screen coming out the bottom -- perfect for static applications like VSCode, iTerm2, etc.

Here's a mock up. The thicker outline represents the macbook pro screen.

Can anybody foresee any issues with this configuration?

An experiment I've been thinking about lately: a (recurring?) Q&A thread! Ask any questions about programming, answer other users' questions, or post suggestions for future threads.

Don't forget to format your code using the triple backticks or tildes:

Here is my schema:

```sql
CREATE TABLE article_to_warehouse (
  article_id   INTEGER
, warehouse_id INTEGER
)
;
```

How do I add a `UNIQUE` constraint?

Meta questions:

• Should I turn this into a recurring thread?
• If yes, should it be a weekly or a monthly thing?
• Should DBA and SysAdmin questions be allowed or should someone else make a separate recurring thread for these?

What's your dream laptop for running *nix?

I'm currently using a Lenovo Thinkpad T410s, and it's getting ready to die. I think it's a great machine, but every computer eventually dies. It runs Debian 8 (Jessie), but it can't handle 9 (Stretch) without overheating. On top of that, I need to use the proprietary drivers! My computer got dropped on the floor today (not my fault!), and it got me thinking that maybe it's time to start shopping for a new laptop.

What are your ideas about what a good laptop for *nix OS's? Any recommendations? What should I look for? What should I avoid?

I love having a SSD HDD, and playing with different distros, but I'd like to avoid the headache I've had with the propitiatory Intel drivers. I like to have control of my hardware, but still use the latest software. If a Raspberry Pi or BeagleBone could match the performance of a laptop then I'd seriously consider using one.

I have interactive firewalls like OpenSnitch running on most of my desktop OS's. I like to see what is going on with my machines' network connections to learn about networking, infosec, and to have have some peace of mind.

Example workflow:

1. Get a firewall notification of a new incoming connection to some process running on my machine
2. If no DNS entry exists and only the IP address is provided, then I google the IP
3. I find something like https://ipinfo.io/74.125.20.189
4. I make a decision as to whether allow/deny based on the ownership info which I found in step 3.

Aside from trusting the particular site presenting the ownership info, how reliable is this information regarding IP ownership?

For example, if an IP came back as "Google" could it really be a GCP instance running a command and control server?

Another example, I know that large corps own big blocks of IPv4, but they must lease these IP's out to whomever, right? I imagine there is some wild-west market for these with little accountability?

Are either of these scenarios realistic? If so, is my entire workflow for "do I trust this IP" pointless?

I recently happened to mention edbrowse in a throwaway comment, and @ainar-g expressed some interest in it. I took my sweet time, but I finally managed to assemble a short(ish) write-up on it, and my sleep-addled mind is thinking that this topic - niche, weird tools - could just become recurrent.

Terminal brosers, such as lynx, w3m and elinks, while still used and under more-or-less active development, are very niche tools. edbrowse fills a niche within that niche, as it's meant for use by non-sighted people, and thus provides an interface even more bare-bones and arcane than the usual TUI/curses apps that share its space.

As per the name, edbrowse's interface is heavily inspired by ed's, the standard text editor: edbrowse, in fact, is not just a web browser, but it combines together a browser, a text editor, a mail client, and - for some reason - a database client. All of these functions are mostly controlled via one-letter commands and, as is tradition, only displaying a single ? on error^*.

edbrowse is also unique amongst the terminal browsers because of its support for JavaScript and the DOM. The text it spits out is meant for Braille displays and screen readers, so it lacks niceties like color or aligned tables, but if you were to browse to reddit.com with it, you would see a perhaps ASCII-art Snoo fill the screen^†.

"Browsing reddit? How‽," you might ask. "How am I supposed to get this thing to stop questioning me? All those ? are filling me with existential dread, I have no idea what to do!"

While it's all there in the manual (but not in the manpages, for some reason), reading through 30k words of text can be a bit of a slog. They do provide a cheatsheet, though, even if it's a bit messy.

So, how do you use edbrowse? If you already know how ed works, most commands (especially "movement", search and listing commands) will work as expected - it is also an editor, after all - but edbrowse adds another handful of them.

The most important of them is, perhaps, browse. It will make edbrowse put in an HTTP request, grab the response (if any), and then render it. It will print out the length, in bytes, of the response and of the rendered text, and stop there.

$ edbrowse
edbrowse ready
b https://tildes.net
119201
20083

To actually peruse the page you can use any of the ed listing commands (print, list, and number), or the z command. z works much like p, but it prints a number of lines (normally 24) while "remembering" your position within the page.

0z10
{Tildes}
{Log in}
<>Sidebar

* {Activity}
* {Votes}
* {Comments}
* {New}
* {All activity}

Links are indicated by curly brackets, while form elements (both input elements and buttons) are wrapped in angle brackets. You can follow a link by jumping to the line containing it and issuing a go command (using g2 to follow the second link on that line, g3 for the third, g$ for the last), but, in normal use, you should probably just search for the link text.

/{Log in}/g
5886
923
0z10
{Tildes}
<>Sidebar

Log in

Username <>
Password <>
<-> Keep me logged in
<Go>Log in

The same thing goes for form elements, but the command to use, here, is i (for interact). i has actually four different subcommands: i[N]=, to set the value of a text field, ipass[N] to prompt for the value of a password field, i[N]* to press a button^‡, and i[N]? to ask edbrowse what that damned element is supposed to be.

/Username/ i=mftrhu
/Password/ ipass
hunter12
/<Go>/i*
submitting form
124579
20049

You can jump back to the previous page with ^, and refresh the current page with rf.

Of course, edbrowse can do much more - can be configured to do much more, via .ebrc, as it possessed (very) rudimentary programming facilities. It can edit its own configuration file, and reload it with config, so - rejoice. You won't ever need to leave it.

And, after seeing just how aesthetically pleasing its configuration language can be, I'm confident that you won't ever want to leave it.

# Switch to a new editing session
e2
no file
e ~/.ebrc
# Show the last lines of the configuration file
$100,113n
100 function+google {
101 b http://www.google.com
102 /<>/ i=~0
103 /</ i1*
104 /^About/+2
105 }
106 function+ddg {
107 b https://duckduckgo.com
108 /<>/ i=~0
109 i2*
110 /<Go secure>/+1
111 /<Go secure>/+2
112 z24
113 }

As I said earlier, while edbrowse does possess some programming facilities, they are very rudimentary. Functions are nothing more than sequences of edbrowse commands with some flow control constructs: they can do everything an user could do, which means that they are often convoluted and overly terse.

The ddg function, for example (which is invoked via <ddg [PARAMS]), first browses to duckduckgo.com. The DuckDuckGo home page, as rendered by edbrowse, only contains a link followed by the search form:

{About DuckDuckGo Duck it!}

<> <S secure> <X>

So the function looks for the (first) empty text field (/<>/), fills it in with the parameters passed to it (i~=0), activates the second form element on that line (i2*) and, once the results page has loaded, skips the initial boilerplate (/<Go secure>/+1,+2) and prints the first 24 lines of results (z24).

Sure. It could be replaced by a single line, replacing all the form interaction with a simple b https://duckduckgo.com/?q=~0, but where would be the !!FUN!! in that?

* This is not completely true, as edbrowse will show more long-form error messages, but it's pretty inconsistent with them.
† Iff you have JS enabled in your current session. It can be toggled on and off with the js command.
‡ I had no luck with the Tildes buttons (e.g., sidebar toggle, upvote button), though, at least not with the version of edbrowse that Debian bundles up.

Hi everyone! It's been a long time since last programming challenge ^list, and here's a nice one I've encountered.

If you search for something like 7km to AU, you'll get your answer. But how is it done? I don't think they hardcoded all 23 units of distance and every conversion factor between them.

If you were programming a conversion system - how would you do it?

First of all, you have input in format that you can specify, for example something like this:

meter kilometer 1000
mile kilometer 1.609344
second minute 60
...

Then you should be able answer queries. For example 7 mile meter should convert 7 miles to meters, which is 11265.41.

Can you design an algorithm that will convert any unit into any other unit?

Edit: Some conversion rates I extracted from wikipedia:

ångström
0.1nm
astronomical unit
149597870700m
attometre
0.000000000000000001m
barleycorn
8.4m
bohr
0.00846
cable length (imperial)
185.3184m
cable length
185.2m
cable length (US)
219.456m
chain (Gunters)
20.11684m
cubit
0.5m
ell
1.143m
fathom
1.8288m
femtometre
0.00000000000001m
fermi
0.00000000000001m
finger
0.022225m
finger (cloth)
0.1143m
foot (Benoit)
0.304799735m
foot (Cape) (H)
0.314858m
foot (Clarke's) (H)
0.3047972654m
foot (Indian) (H)
0.304799514m
foot,metric
0.31622776602m
foot,metric (long)
0.3m
foot,metric (short)
0.30m
foot (International)
0.3048m
foot (Sear's) (H)
0.30479947m
foot (US Survey)
0.304800610
french
0.0003m
furlong
201.168m
hand
0.1016m
inch
0.0254m
league
4828m
light-day
25902068371200m
light-hour
107925284880m
light-minute
17987547480
light-second
299792458m
light-year
31557600light-second
line
0.002116m
link (Gunter's)
0.2011684m
link (Ramsden's; Engineer's)
0.3048m
metre
1m
m
1metre
km
1000m
mickey
0.000127
micrometre
0.000001
mil; thou
0.0000254
mil
10km
mile (geographical)
6082foot (International)
quarter
0.2286m
rod
5.0292m
rope
6.096m
shaku
0.303 0303m
span (H)
0.2286m
stick (H)
0.0508m
toise
1.949 0363m
twip
1.76310
yard
0.9144m

Hey ~, I'm trying to get a programming job. I don't have a degree (I may go to college, but if I do it'll be in a few months), and little work experience. Do you have any tips that could help me have a successful job search?

Here's my resume (somewhat anonymized). I tried to focus on experience I've gained from creating open-source projects to show the skills that I have. I've made sure that all the projects listed have demos, screenshots, usage instructions, etc. Any advice on how I could improve it would be appreciated.

Thanks!