Hi all - I need some help troubleshooting my internet and really don't feel like dealing w/ customer service reps. I don't consider myself a tech savvy person, so I'm wondering what this community might know..

I've been having issues with my internet for a while. we have xfinity with a plan that promises up to 1000mbps. I'm lucky if i get up to 250 on a good day. beyond that, we constantly lose connection, or get very slow connectivity. i'm using a Netgear c7000v2 as my modem/wifi router combo paired with a Google Nest Mesh router. My home is roughly 1000 sqft footprint split level. my computer is in a different room, but there's no doors between and about 600 ft from the modem/mesh routers.

i called xfinity to talk about the issue, they said that my modem likely needed to be replaced. the initial modem was also a Netgear c7000v2, but i figured maybe the hardware just burnt out(?) they sent me an xfinity modem, and everything seemed to work great (still not 1000mbps, but definitely better). when I realized they were charging me more than I was willing to pay monthly for a rental fee on the modem, i decided i'd go back out and buy a new modem. i bought a Netgear c7000v2 again, because it should be able to handle those speeds, and to my understanding is a decent enough modem. i also bought a new coaxial cable to double check. but after replacing, my internet is still spotty and constantly goes in and out.

i don't have any device to plug directly into the ethernet cable (because it's 2023...), so i can't pinpoint the issue through that. i haven't had an xfinity tech come out yet, because apparently that takes anywhere from 6-8 weeks to get a visit...

any ideas on what i should do? part of me is convinced that xfinity is throttling my internet because I'm not using their modem and paying them a rental fee, but i don't want to give into conspiratorial thinking...i'm about to file an FTC complaint on them because I'm just fed-up at this point.

So for various reasons I can't use paper books very well. I've been reading almost exclusively on epaper for... 15 years or so now?

My current reader is a Kobo Aura One which has done very well but is starting to get a bit tired - the screen is a bit scratched up and the battery life is measured in days rather than weeks (at around 1hr/day reading with the frontlight on low). Plus the usb socket has done that annoying thing where the cable needs to be at the exact right angle in order to charge.

So I'm in the market for a new one. I'd like it to be >7 inches, 300ppi (same spec as the Aura One or better). Overdrive support is nice but not essential. EPub support is a must, as is orange/red frontlighting. Linux slightly preferred over Android. Battery life in weeks. Waterproof doesn't matter. Cloud sync, bluetooth, audiobook support, apps (other than a decent reader), note-taking - I don't care about. It's for reading books, nothing else. Budget is not a huge issue but I don't want to spend more than I have to.

I have had zero time for the last few weeks to look into what the market is doing now and it's been many since I paid much attention to the world of ereaders, so anyone who is more up to date than me who can offer some suggestions would be much appreciated.

I haven't really messed with printers in probably 15 years or more, but it felt like any time they were brought up, there were two flavors:

• Older printers, which decided if they wanted to work or not based on absolutely nothing at all
• Newer printers, which are covered in DRM and mostly a nickel-and-diming scam

Now, for the former I remember having some issues, but generally just clearing the printer's cache (or whatever it was called) would fix most of the problems. I think the bigger issue is that I always helped people set up cheap Walmart-sold inkjet printers that had more hardware issues than software, along with ink that would go to shit instantly.

But I was out today at a thrift store and they had a Brother for $25, with an entire extra unopened toner cartridge (I think that's what it's called?). I asked them if it worked, they said it did, but if it didn't I could return it by tomorrow.

So I brought it home, assuming something would be wrong with it, but in about 10 minutes I had it plugged in, connected to my wifi network, and connected to my computer. I tried scanning-- it worked fine. I tried copying-- it does that no problem. It took longer to install the drivers on my PC than set up the printer itself.

So are printers really as straight-forward as I experienced with this cheap used one, or am I just lucky?