Basic Household Tool List

(Edited to add suggestions from the comments and the general philosophy of this list)

• Tool bag (at least 15 inches long)
• Hammer (12 or 16 oz)
• Rubber mallet (white head preferred, non-marking)
• 6 inch Needlenose Pliers
• 8 inch Slip Joint Pliers
• 8 inch Crescent/adjustable wrench
• 10 inch Slip groove (large jaw) pliers
• Box cutter (optionally folding) + set of replacement blades
• Hacksaw + spare blades
• Scissors
• 25' Tape Measure
• Set of precision (small) screwdrivers
• #1 and #2 Phillips head screwdrivers
• Small and large straight blade screwdrivers
• Multi screwdriver with torx/phillips/straight blade heads
• half-round file (h/t @patience_limited)
• a metal putty knife or a 5-in-1 combination paint scraper (h/t @patience_limited)
• roll of twine
• roll of blue masking tape
• roll of Gorilla tape
• roll of black electrical tape
• super glue
• small bottle of wood glue
• 2" paint brush
• torpedo level
• small flashlight
• a strong neodynium magnet - to use as a stud finder and for many other things (h/t @the_man)
• 9v batteries
• AA batteries
• AAA batteries
• 50 1" #6 wood screws (zinc/steel, not brass)
• 50 2" #8 wood screws (zinc/steel, not brass)
• small box of 1.5" finishing nails
• light and heavy duty drywall anchors
• course and fine foam sanding blocks (h/t @patience_limited)
• 5 gallon bucket
• safety glasses
• N95 masks
• leather work gloves
• foam ear plus (h/t @the_man)

Bonus list (things that are more expensive or nice-to-have upgrades):

• a stud finder - the cheap ones are worthless, buy a good one or not at all (h/t @DeaconBlue)
• a battery powered drill + bit set (h/t @patience_limited)
• a set of metric and imperial allen keys (h/t @sublime_aenima)
• a basic socket set with a mix of metric and imperial sockets (h/t @auk)

The philosophy of this list:

A good starter set should include tools and supplies someone will be glad they had that they didn't know they needed. Even if they aren't "handy", a handier friend might use them (and they learn something in the process). It doesn't include very specialized things like demolition, electrical, or plumbing tools. If you're going to undertake projects in those areas, you should know a little about what you're doing, and you'll be able to buy the right tools for the specific project. As as electrical engineer, I particularly don't include a multimeter because I don't want to encourage someone to mess around with electricity if they don't understand how it might hurt them.

This list specifically does not suggest brands (except where the brand is the thing, like Gorilla tape). Opinions on what brand is best vary widely, but my general suggestion is this. Don't break the bank buying high end tools for someone who may never use them. A $2 hammer is going to be fine for someone who uses it once a year. If they are using them often enough to want something better, they can buy something better (or you can buy it for them).

Hi, I have a weird cubic space in my garage wall due to the location of the chimney and stairs to the basement.
The lower edge of that cubic hole is at 41 inches (104 cm) from the floor. Its deep is 40 inches (101 cm). Width 39 inches (99 cm). Height 46 inches (117 cm).
Too deep for static shelves, I cannot reach the end. Too tall for sliding shelves (kind of drawer thing), I am 5'7'' (172 cm). In its current form, it is too much of a space for its practical use.
I thought that a carousel that moves shelves up and down (like in this design for shoes https://storagemotion.com/shoeselect/) but for heavier weights would be practical... I have no idea how to even name the parts to buy them, if they exist.
Also, I will appreciate suggestions for an alternative solution.
Thanks.
PS: located in Massachusetts, US.

I am putting a new surface on my Deck. I am using Trex and 2.5" composite specific screws. These are small head screws with a T20 torx bit.

[img]https://i.ibb.co/MchtXPx/20230628-175119.jpg[/img]

I am 7.5 boards in out of 25 boards and I have destroyed 5 bits, 3 of them brand name impact rated bits. I am making sure to stay cammed in, and weight on top of the screw. I am lining the drill up with the angle of the screw. I am also predrilling every hole.

I feel like I have to be doing something wrong. I just don't know what else to do.

Edit - these are the exact screws I am using - https://www.homedepot.com/p/Grip-Rite-9-x-2-1-2-in-Brown-Star-Drive-Pan-Head-Coarse-Composite-Deck-Screw-10-lbs-Pack-N212CSB10BK/207193648

I think many of us are students, or just like self-learning some topics for themselves, perhaps their work requires studying — I think it might be interesting to collect a few tips we have experience with on how to do it efficiently.

I would start with probably one of the best tools in this category that I think are still underutilized by many: spaced-repetition software. Perhaps more people might be familiar with the concept from language learning with word cards, but the base idea is that reinforcing some knowledge at increasing intervals will effectively make you remember it ’forever’. A final selling point on this topic: it only requires 10 minutes out of your entire life to remember a fact for basically forever with instant recall - that’s a very good use of one’s time in my opinion. For more information on it here is a great article.
(It’s talking about Anki, a notable spaced repetition program that is free and open-source (the ios client is paid though, as this is the only income source of the maintainer, but you could just use the web interface as well. Not affiliated))