Calling to all houseplant experts,

I've had my plants for a couple of years, and they seem happy and growing well. I currently have a flamingo flower and a philodendron (here is a picture of them).

Over the years, I think I have gotten pretty good at taking care of them. One thing that still remains a mystery, though, is repotting and when to do it. I have never done it before, and info online seems confusing and often conflicting.

I live in a small space, so I would prefer not to have to do it, but I can see roots growing out of the bottom of the vases, and the plants are getting rather big: so much so, that my philodendron needs external support to not fall down. Nevertheless, they both keep growing.

So, onto the questions: how does one know when it is necessary to repot a plant to a bigger pot? What happens if I do not do it? And if I must do it, how should it be done? Ideally with minimal resources, since I am very limited on storage space...

And since we're at it: any houseplant-related pro-tips from the veterans?

Hey everyone,

I’m currently running Schwalbe G-One Bite 40mm and I’m thinking about moving up to 50mm for a bit more confidence off-road. Where I ride it’s not groomed gravel or proper official well-kept MTB trails, just typical unmaintained forest trails: holes, roots, loose rocks everywhere, some of them golf-ball sized. On descents, it feels pretty sketchy with the 40s.

The problem is, I don’t have long stretches of continuous/unbroken nature. It’s more like short nature pockets in between civilization so, I still need to transverse a few roads (tarmac and cobbles). So I’m trying to find something that’s still reasonably fast rolling on road. I was hoping to find something up to 20 watts of rolling resistance. I think I saw somewhere that my tires are around 25 watts, so some improvement in this area would also be nice.

I started investigating tires on bicyclerollingresistance.com website and started looking at measured knob height (center and edge), trying to pick something with more bite than what I have now. But the more I read, the more I see people saying knob height alone doesn’t mean much and tread pattern matters more. At this point I’m not even sure what I should be looking for.

These are the ones I’ve selected for the moment:

• Schwalbe G-One R Pro 50
• Schwalbe G-One RX Pro 50
• Schwalbe G-One Overland Super Ground SpeedGrip 50

Alternatives slightly above 20 watts:

• Continental Race King Performance ShieldWall 50
• Pirelli Gravel M (tested in 45mm, but there’s a 50mm version too; hopefully they perform similarly)

Maybe other brands or models I should be considering that aren’t on BRR?

But honestly… I don’t really know what I’m doing. I started by filtering by wattage and knob height, but it seems the tread design or compounds are even more important.

So, in conclusion, what I’m after is:

• More confidence on rough, loose forest descents (I'm not doing jumps. Let's say, more like XC)
• 50mm volume
• Still decent on road sections
• Not feeling like I’m dragging an anchor on pavement

If anyone has experience with these in real, messy forest conditions (not nice smooth gravel), I’d appreciate some advice and recommendations. What should I actually be looking at when choosing?

Thanks in advance!

So I've been out of the loop on camping and, more generally, outdoorsy stuff beyond day hikes for a good couple of years now. In my absence, it seems like a large chunk of the manufacturers I used to rely on for flashlights and headlamps (Black Diamond, Petzl, Fenix, etc.) have switched over to lithium batteries, many to USB chargeable internal batteries.

That feels weird to me, coming from the era of "carry a couple of spare double and triple A's with you", since you only needed a few of one or the other to keep all your lights going, even on a longer trip. Given that everyone's doing it now, though, I'm assuming it works out fine.

Anyone have recs on what brands are good these days, what models, and how to buy to maximize the "keep all your lights going with the least backup energy sources" factor?

What projects would you think would interest my daughters the most? The oldest is 11 years, super creative and builds the most intricate stuff out of plain paper, tape and cardboard. I have learned programming from about her age, but feel like software would not catch her attention the same way hardware would. They already experiment with programming and microbits in school (what a truly lucky generation!!!).

I am looking for stuff that is not too complicated/expensive that it will just collect dust on a shelf because it took a lot of time to build. Specifically I would like to try something that could be dismantled and reused for other projects. Maybe a barcode scanner or something that has a connection with real life applications.

Some background here - I have a niche YouTube channel, mostly doing longform (often 3+ hour) commentaries on a board game with a friend. We're both very skilled at the game and are apparently entertaining to listen to, but it's all very amateur - I don't really know anything about videomaking except what I've picked up as I go.

That had never really been an issue, because the topic is so niche that only people really interested in the game watch, and they didn't really mind. But last year we got a shout-out from a big YouTuber and the subscriber count has gone up a lot since, to the point where it feels like I really should figure out how to make it a little less amateurish.

I want to start with audio, because that's 90% of what we do. But I don't even know where to start with it.

I got Blue Yetis for both of us a few years ago because I was vaguely aware that was a good mic, but if anything it made it slightly worse than just using headsets (quite a bit more echoey) - I don't know if that was a mistake, and if there are better mics to go for?

I'm also aware that you're supposed to have some kind of padding on the walls to stop the echoing, but that isn't really feasible for me both because I rent, and because all the rooms of the apartment I'm in are absolutely massive. I've heard that you can throw a blanket over your head, which I've tried for a short video but I absolutely couldn't handle for a three hour one. I'm lost on how to solve that too.

If anyone here knows much about it, I'd love either direct advice about it or a recommendation for how/where to learn about this stuff. It's super appreciated!

Hey there, going to keep this short: I used to love camping and hiking, but now can't quite bring myself to do it, this is partially due to the fact that I am single, and none of my (very few) local friends would ever be interested in joining.

So, does anyone around here have any tips or ideas on how to get into hiking or camping again?

I've started to look into getting a 3D printer mainly for printing minis and terrain for TTRPGs. For the aficionado and print quality the best printer type seem to be resin based printers, but I don't think I'd be able to deal with the toxic fumes in a safe manner. As such I've settled on looking at filament based printers and I don't really need super high fidelity prints.

I need one that works well with Linux and preferably OSS. I am willing to pay for closed source software (or OSS) if it runs on well on Linux. So if you know of any software that is easy to get started with I'd be happy to hear about it. If you know of any models or makes that I should avoid I'd also appreciate a heads up!

Any other advice for someone just getting started with 3D printing?

I recently got my first vinyl (Breach by Twenty One Pilots) for my birthday. I've had it on streaming nonstop but want to play it properly and start a small collection.

I've seen a lot of recommendations for the Audio-Technica AT-LP60 as a beginner option (affordable and apparently decent quality) but also read that spending a little more can get something more "serious", though I need speakers too.

The thing is that it needs to be new gear only or easy to buy: My partner plans to gift the setup for Christmas and marketplace/used gear is hard to source locally where we live, so that's probably out. We have a budget of around €150 for the turntable and other €150 for the speakers, or €300 total. Open to a modest stretch if it avoids an early upgrade. Manual or semi-auto is fine but preferable plug-and-play.

Prefer compact powered speakers with good near field clarity, not necessarily loud since they'll sit behind my PC monitor on my desk.

Questions:

• If I'm considering the AT-LP60, what's the smartest "slightly more €" upgrade path for a first set-up?

• For small desks, which powered speakers pair well with entry-level turntables (good clarity but not boomy)?

• Anything to avoid or other advice you may have for a beginner?

Appreciate any guidance. I’m looking forward to spinning Breach and building out a few more records.

Ps: Already ordered anti-static inner sleeves, outer sleeves, and a carbon-fiber record brush to keep things clean!

Well, my tomato season is basically over, and I have to say it was pretty disappointing. I've been gardening in the same place for 25ish years, and the microclimate has definitely changed. More heat, more humidity, more rain when we get it but less rain overall.

I've been growing my tomatoes in 20 gallon metal trashcans for various reasons, and that had been working great, but in the past two years the heat has wreaked havoc on them.

Last year was basically total failure. This year I had 1 sort of success-- Rosella Purple grew, gave me a few delicious fruits early, shut down all summer but stayed alive, and then gave me a couple more in the last few weeks. I grew Floridade on someone's recommendation for it's heat tolerance and it did produce all summer but I really didn't like anything about it. I grew a cherry tomato I thought was Black Cherry (which I really enjoy) but turned out to be some other, red cherry that was OK but nothing special.

I'm hoping there are people on this site who have some recommendations? I'm supposed to be US Zone 7, but it is really pushing zone 8. I'm looking for complex flavors, lowish acid and the ability to pollinate in 90-105 degrees.
I prefer beefsteak-style or at least low acid. I prefer "black" varieties for the depth of flavor. I prefer open-pollinated for the politics.

Or maybe you could share some tricks you've discovered to help tomatoes deal with the heat?

I'm hoping to get a head start on planning for next year.

First of all, I want to say very big THANK YOU for all who contribute to various libre, open source etc. projects. I'm so happy that people love sharing knowledge, skills and fruits of their work.

But to the topic - how do you find time for it?
Whenever I update my Debian or Axpos or any other libre software I see soooo many updates/changes made by (probably soooo many) people. And I always ask myself a question - when did they do that? Where have they found time for contributing? For me full time work makes me so tired that it's the last thing I think about after work hours. Especially in the office job, after x hours of sitting before my monitor I truly hate every next minute after work. I would love to contribute some code, I would realllly love to. Sometimes I find some bugs and try to report them and that's all I am able to do. What frustrates me the most is that I have abilities to code because it's my daily job, but I don't have energy to do that.

So, could you tell me how do you find time and energy to contribute to libre projects?

Sometimes getting into a new hobby can leave you feel like you don't even know where to start. What equipment do you need? What is a good starter project? Are there any safety concerns? What are some of the tricky hurdles to getting started or good tips for getting better?

This thread is a place to ask questions about a hobby you're interested in and others to give insight. There are no "stupid questions"!

I went all out this year, I meant to just grow a couple tomatoes from seed and some basil I had from years ago and it exploded into a whole thing, we’ve got peppers, a rosemary bush, lavender and a fig tree that is a cutting from my friends fig tree.

My tomatoes are just starting to come in!

What have y’all got growing?

I've been slowly getting into sewing, mainly with the goal of making cosplay, but for now mostly repairing and altering clothing by hand sewing. Since I've stuck with it for some time now I am thinking of getting a sewing machine, since hand sewing larger things is a bit of a pain.

So now I am looking at some sewing machines and I have a few questions: Is buying a cheaper machine a waste of money? I've read some older topics here on Tildes and saw that Singer machines have a terrible reputation, so I probably should avoid those? What kind of features should a machine definitely have? For example I am looking at something like the Janome Juno J15, is this still basically a toy or would it be enough for most things?