I recently got my first vinyl (Breach by Twenty One Pilots) for my birthday. I've had it on streaming nonstop but want to play it properly and start a small collection.

I've seen a lot of recommendations for the Audio-Technica AT-LP60 as a beginner option (affordable and apparently decent quality) but also read that spending a little more can get something more "serious", though I need speakers too.

The thing is that it needs to be new gear only or easy to buy: My partner plans to gift the setup for Christmas and marketplace/used gear is hard to source locally where we live, so that's probably out. We have a budget of around €150 for the turntable and other €150 for the speakers, or €300 total. Open to a modest stretch if it avoids an early upgrade. Manual or semi-auto is fine but preferable plug-and-play.

Prefer compact powered speakers with good near field clarity, not necessarily loud since they'll sit behind my PC monitor on my desk.

Questions:

• If I'm considering the AT-LP60, what's the smartest "slightly more €" upgrade path for a first set-up?

• For small desks, which powered speakers pair well with entry-level turntables (good clarity but not boomy)?

• Anything to avoid or other advice you may have for a beginner?

Appreciate any guidance. I’m looking forward to spinning Breach and building out a few more records.

Ps: Already ordered anti-static inner sleeves, outer sleeves, and a carbon-fiber record brush to keep things clean!

A little over a week ago I picked up a 3x3 Rubik's cube after seeing a coworker mess with one. I love fidgety things either as a stimming activity or as a puzzle. Do any of you have other fidgety puzzles to recommend?

Right now in the US Joann is going out of business and Ditto pattern projectors are ultra-cheap. That being said I don’t have much hobby money these days so I can’t just impulse buy. I have done some research and they have some very mixed reviews since it’s a very closed ecosystem. So I was hoping to get some opinions and see if it’s worth it at ~$75. Right now I want it primarily from FOMO because of tariffs on Chinese goods.

Honestly half of me wants to buy it just because it comes with a cutting wheel and board.

I want a very bright light to put on the floor next to my current large jigsaw puzzle that I can easily change the angle of so that I get good illumination but not glare where I'm working. I've recently been using flashlights for this, but I want a lamp that plugs into an outlet so I don't keep draining batteries and also because it's kind of annoying to hold a flashlight the whole time.

I'm thinking some kind of hobby lamp is what I want, but I'm working on the floor not on a table. It should be not super heavy because I'll probably sometimes have to pick it up and carry it to the other side of the puzzle.

I think anything bright enough to give me sufficient light while puzzling would be too bright to wall-mount because I might look up into it accidentally so I definitely want an angled lamp.

idk what other information might be useful here, but I don't need or want a magnifying glass, just a bright light.

thanks!!

I need a new place to buy electronic components and some mildly niche circuits/products that's not Amazon. I'm currently looking for an adjustable temp fan controller for an indoor green house. It's sitting in front of a Window on a shelf covered in plastic. I want to add a 12v dc fan to the top to turn on when gets somewhere around 90 degrees farenheit.
I used to use parts-express.com, but it looks like they mostly just do audio now. Does anyone have any good recommendations for purchasing things like this in the USA.

Soldering/electronics repair enthusiasts: I am in need of a soldering iron/station for electronics repair and wiring, preferred budget is under $150, perfection can raise the budget to $250.

First line of this post is all that's really needed if you just want to provide advice on what to buy (which is just fine, people don't need to know how a car works for me to explain that they probably just need a minivan).
Below is what I have gathered thus far if perhaps there's more that you'd like to know about what I've seen and perhaps misunderstood so far.

At present I have a no-name, non-adjustable, extremely basic soldering iron that is more fire hazard than anything and a Weller soldering gun that is obviously not meant for electronics and small wires. The iron has been good enough for the occasional need to solder a couple of wires together to get something broken back up and working, but is not something I'd use on anything critical.

I am very confused. I want to buy my wife her first ever sewing machine (she seems quite dedicated on learning it, and she has done basic repairs on clothing before).

The problem is that I see that lots of people on Reddit that don't recommend too many newer models due to lack of reliability or using poor quality materials (plastic housing/gears, etc.), but at the same time many people are saying don't pay too much for an older machine (like even $50 USD seems to be too much for some people lol) which does not have these problems because you don't know how they maintained the machine, but any of the machines that seem to be decently cared for (with my very limited knowledge) are at least $100 CAD.

So does anyone have a recommendation for a decent sewing machine? For reference, I was eyeing a Kenmore 158.13200 I found locally for $150 CAD, which seems to include lots of accessories and the carrying case.

It feels like I'm going crazy because I've been trying to find this thing for years with no luck.

A very long time ago, I got a 3D puzzle of the globe made of disks that needed to be stacked on a spike. Like a decorative Hanoi Tower puzzle. Wasn't particularly difficult but it looked really cool after sticking the pieces together and painting. Unfortunately it was lost while the family moved back in 2005 and figured I could just get another one and a few other designs. No dice. Anywhere. Local games and hobby stores never stocked it. Later, Google was no help. My family don't even remember seeing it so there's a chance I might be hallucinating.

Every few months I get a brainwave of new search terms to query with no luck and I keep putting off just asking online. But now that I've almost finished my new office, I really want it on my shelf.

So anyone know anything about it or am I better off making it in CAD and CNC cutting my own thing?

I have a teenage child. They're going to be doing "design and tech" at school, and they've shown an interest in light maker / builder projects.

I want to put together a small toolkit for them.

The difficulty I'm having is that when I look at precision screwdrivers I pick a Felco set for £80. For regular screwdrivers I pick either Felco, Wira, Wiha, or Sandvick Bahco. This is probably a bad idea - they're going to end up with a lot of very expensive kit that they will not appreciate yet.

The other thing I'm struggling with is knowing which bits of kit are essential and which are nice to have.

I'd be really grateful to hear your thoughts about this kit. I'm especially interested to hear discussion about balancing "good enough" with "avoid garbage" -- I do prefer to spend more on quality rather than buying cheap buying often.

Screwdrivers:

A handle and a set of bits to fit the handle - £10
A set of weird bits (security, hex, torx) to fit the handle £5
Screwdrivers - pz1, pz2, 4 flat head screw drivers in sensible sizes (still working this out) (probably stanley FatMax) - £30

Snips - they're getting my Bahco snips and my ancient lindstrom snips. I want to get them something they can destroy through misuse, so I'll buy something for around £15

Pliers - needlenose serrated pliers £10
Pliers - big pliers - they'll be getting my ancient RS pliers.

Wire strippers - I like the scissor type that have a range of holes. A nice pair is about £20.

Wrenches and spanners - I have three adjustable spanners in different sizes. I'm looking at micro-ratchets, so something like Kerr or felo (xs33) (but the felo is expensive!!) or Bahco 2058/S26 for £20

Soldering iron - I'm super tempted to just get Hakko's intro model for £100-£150. But I don't know whether I should go instead for some cheap thing like tenma. My own preference for me is strongly Weller - I used weller irons for decades and they were so solid and robust for what I was doing, but not a great choice for tinkering about. I'm struggling to understand the build quality of Tenma bought from a reputable company. I don't want my child fixing things in a mains powered box.

I need a tool box to put it all in.

I need some kind of cutting and filing tools - cheap set of files and a little handle.

I need some measuring equipment - I don't know whether to include a nice set of steel rules or a cheap digital calliper.

Alongside all this there will be a dremel multitool and some useful accessories for it.

And also safety equipment - dustmasks, eye protection (from a reputable supplier!!)

I miss photography subreddits. I don’t miss Reddit as a whole at all though, and I think smaller forums like Tildes and a couple Discord servers have helped bridge the gap in a lot of other areas. But I just have not found a good replacement for r/analog in seeing other hobbyists’ film photography and share my own. Where should I be looking?

I already play piano and guitar to some degree but never got to learn what I really wanted to play which was blues music.

I see ads here and there about “learn to play following this app!” and was wondering if people had any experiences or recommendations for app-based learning?

I've had an interest in 3D printing since first hearing about it many years ago, but at the time printers were expensive and learning materials and resources were scarce. Nowadays, it seems like 3D printing is as common as regular old 2D printing but I feel left in the dust.

What's really making me want to get started now is I've collected a lot of junk over the years that I've told myself I could repair, but a lot of the repairs would be much easier with a 3D printer and custom modeled parts. Dearest to me would be an old watch that my grandfather gave to me before he died. The part of the watch that connects the strap to the case (lugs, I think it's called?) has broken off and gotten lost, and it's a proprietary part with no replacement parts available. I'd love to just 3D-print a solution but have no idea how to get started.

I consider myself a creative person, I have plenty of experience with Photoshop and illustrator, but I have never once dabbled in 3D modeling software like Blender or AutoCAD. The closest I ever got was peering over the shoulder of an artist who was working on a video game character model in Zbrush, or maybe working on custom Half-Life maps in Valve Hammer. So I'm looking for the most basic, easy-to-follow set of instructions to get me from zero knowledge to successfully printing bespoke DIY repair parts at my local makerspace.

Would also love to have this be a discussion on 3D printing in general. How did you get started? How have the tools and techniques evolved over the years? What do you think are the next big things coming in the hobby? What are things you wish you knew when you started but only learned after mistakes were made? Share your thoughts and anecdotes, I'd be happy to read them.

Hi everyone,

So I'm thinking (haven't actually decided yet) about getting into CNC machining in a very hobbyist, fun-to-learn sort of way sometime in the next year. I'm trying to use this as an opportunity for some discussion around the current state of entry-level hobbyist CNC's. I have wanted to have a small CNC and the ability to use it for small parts for more than 5 years now. I think learning CAM would be very challenging but useful also. I wanted to ask if anyone is aware of any desktop CNC's that are priced reasonably (ideally in the $3,000 or less range) that are somewhat similar to Prusa. In being similar to Prusa, I mean built with good quality parts but also with a sizable community for support and the ability to repair it yourself for long-term use. I would only really be machining wood & aluminum, although if small and very simple steel parts could be occasionally machined at a slow feed rate that would be freakin' awesome.

So with all of that said, what is my background and experience?

• Not an engineer, biology/healthcare background. But am generally good with computers and technology. No programming experience at all.
• Have been 3D printing for about 5 years
• Comfortable with modeling in Fusion 360
• Do not have a workshop of tools. No table saw, no drill press, no lathe, etc. Just 3D printers and some handheld power tools. I have no desire to have a workshop with large tools like that, either.
• Generally only make small functional parts. The ability to CNC small aluminum parts to add significant strength to larger 3D printed parts would be useful. Also, would be useful to copy small aluminum/steel parts of things that break around the house like, for example, a small metal part in my washer that broke off recently.
• I also do not have a laser cutter, and am open to input that that might be the better thing to get before a small CNC.

Thanks for any feedback!

As part of the ongoing quest to turn everything I enjoy into an exercise in statistical modelling, I had a look around today for a way to track what books I've read and which ones I may be interested in. I found a bit of a jumble of things in various states of development, half of which are owned by Amazon (which I'd prefer to avoid) and the other half with incomplete, confusing, and opaquely sourced data.

I use this kind of service for a handful of other topics, mainly untappd, AniList, and last.fm. I'm only really interested in the ability to keep track of read/watched items - I don't find myself rating things or making complex lists unless I started my journey with a hobby by using one of these systems. Of course for this to work out, it needs to have a fairly comprehensive library. I was unfortunately disappointed with OpenLibrary, which would otherwise be my top pick. I found systems like readarr and calibre a little clunky for this in the past since they're so focused on file management, but I'm open to retrying them.

Does anyone here have any insights in this space? Not just limited to books, I'm also interested in trackers for TV/Movies. Preferably not owned by a massive company like Amazon, I know a lot of people were disappointed when they deprecated the Goodreads API.

Hi Tildes!
I'm a college student considering adding a gas motor onto my existing bike. I'm in a pretty hilly city, so biking around for groceries is kinda annoying... plus I wanna just zoom around some trails in my free time.
Currently, I'm looking at one of the 49cc 4 stroke engine kits all over Amazon/Ebay, since I heard that 4 stroke motors are supposedly quieter and more reliable than 2 strokes. I don't care about speed... in fact, I don't want to be going over 30mph on a bike. 49cc also makes this thing street legal in my state.
I did consider doing an e-bike conversion as well, but those are much more expensive... a 4 stroke kit is ~$160, while any reputable e-bike battery alone is more than that. These things don't burn much gasoline either, getting 100-150 mpg! I'd have to ride thousands of miles before the fuel cost exceeds an e-bike battery.
So, any advice would be appreciated! Also, I'd be willing to spend ~300 on this if there is a compelling reason to get a better motor than the generic Ebay one. If you have motor suggestions, please link them!
Thanks,
purpuraRana

Beginner amateur photographer here (emphasis on the amateur - zero desire to monetize my photos or start a business). Several months ago I bought a Sony A6000 after doing some research on cameras for beginners. The camera was fine but to completely honest I wasn't very enthused with the pictures coming out.

Then I bought a 50 mm prime lens, and what a difference! Compared to the kit lenses, my photos started coming out the way I envisioned them. They say you should never blame the gear and while I agree with the general sentiment, photography became a lot more fun after acquiring my nifty fifty.

My question to all the photographers out there is, what next? For context, I mostly enjoy shooting people from close distances (1-5 m) away. However, a lot of my shots are of groups of people doing sports-like activities so when there's more than two people I have trouble capturing it all with my current setup. Any recommendations are much appreciated!

I'm always in the market for new podcast recommendations, so here are some of mine. All available via your regualar podcasting app, probably.

No Such Thing As a Fish, the QI podcast. Odd facts and trivia. Rarely do I hear things I already know on this one. Obviously it's no Answer Me This but what is?

A Problem Squared, comedian Bec Hill and stand up mathematician Matt Parker answer listener questions, usually in excessive and fascinating detail. The presenters are good friends in non-podcast life and it shows in their chemistry.

The Guilty Feminist, a great mixture of standup comedy and discussion on a wide range of topics. Great selection of guests.

Lateral, Youtuber Tom Scott hosts a panel quiz where lateral thinking is rewarded. Fairly lightweight but still fun.

A Podcast of Unnecessary Detail, the Festival of the Spoken Nerd team do a podcast (Steve Mould, Matt Parker, Helen Arney). It is as you might expect, nerdy facty sciency stuff.

Wheel of Misfortune, comedians Fern Brady and Alison Spittle take listener submissions on unfortunate or embarrassing events and discuss their own misfortunes with a guest with a different topic each episode. More funny than perhaps it sounds.

Anyone using a drip irrigation system they can recommend? This would be for watering veggies (and possibly flowers in the future) in raised beds. These are some of the things I’m looking for but I’m getting a bit overwhelmed with all the choices out there:

• network capability, whether that be an app (iPhone) or website I can look at stats and control from
• 2 different garden beds to start with (3’ x 8’), with possibly 2 more in the future
• drip is the only irrigation I’m really concerned with so no need for sprinklers or anything (I don’t think, at least)
• there is only one spigot available for the area the beds are in

Since it seems we have a few other cyclists on here, I thought I would ask for a recommendation. I'm looking at bike computers, and I've been going back and forth between Wahoo and Garmin. I don't need anything super fancy, so I've been looking at the Bolt or the 530. I really want it for making a route on the computer, and then getting directions at turns (along with the basics like speed, distance, time, etc.).

My biggest priority is stability and battery life. I've read some reviews of the Wahoo saying it crashed or froze on them, which would be a huge turn off to me. My current "computer" is just a simple magnet on the wheel that runs a sensor - it never crashes or freezes or anything like that, and I change the battery about once or twice a year.

So, I'm curious if anyone has suggestions or experience with these.

And also I just wanted to get more cycling content on here... :-)

In a few weeks, I'll be making a short trip (3 days) to Palo Alto, working in the Stanford Medical Center area.

I'm hoping for some local or experienced insight into "don't miss" destinations for food, culture, history, and sight-seeing. It's likely I'll only have Sunday afternoon and weekday evenings free, so the personal tour may have to be more focused than local guides might otherwise suggest.

My home area has great food, but I'm really starving for Eastern cuisines. I'm willing to go beyond what a corporate travel budget permits if there's truly extraordinary, "can't get anywhere else" dining available.

Your insights are greatly appreciated!

I'm a US citizen living in Berlin, and I'm currently back in the US (Northeast Ohio specifically) for a family wedding. We've got a lot of extra room in our suitcases, so I want to bring stuff back that's hard(er) to get ahold of in Germany. I figured this is a good place to ask for any recommendations from others who live in Europe or have experience traveling!

As an example, here are some of the common recs I've seen in threads on r/germany:

• bulk OTC meds like aspirin and tylenol (not hard to find in Germany but cheaper in the US)
• brown sugar
• double-acting baking powder
• Frank's red hot sauce (maybe other hot sauce as well, Germans are not a spicy people)
• Ranch dressing (I've heard the powdered kind is better bc it's easier to pack?)
• Adobo seasoning (probably other Latin American ingredients too but this one specifically is a must-buy even for my white ass)
• specific brands of candies & junk food not available in Germany (though ime this category is the easiest to find at US-themed international stores, albeit at high prices)
• Levi's jeans for some reason (I don't really get this one tbh but I always see Germans saying it in threads)

I know for sure I'll get home and immediately regret not having purchased something. Anyone with experience traveling between these two continents, please let me know if you think of something missing from this list!

Ok, so the "Going on a trip and have zero idea what to do as a non-tourist..." isn't entirely true like it was in my post about NYC last year, but everyone was extremely helpful and threw out suggestions I wouldn't have even thought about looking for. So here I am again to bug you wonderful people for Tildes Travel Guide 2: Electric Denver Boogaloo

Same as before, staying for a week, I do have a rental car this time (trying to decide between the comfort of a Lexus or sportiness of an Alfa Romeo, damn car guy indecisiveness) so transport is less of an issue, anything that you'd suggest to see/do?

I am in Scotland for a little vacation with a friend, and am looking for recs! We are mainly in Edinburgh, but have a car and are open to just about anything! I don't really mess with touristy stuff, but am willing to try if you think its worthwhile! Also will be here for the rest of the week! We are planning on going to the gardens for sure, but other than that don't really have a whole lot planned. I would like to go to Galloway at night and see the milky way though. I love the scenery so I don't mind a short drive. Thanks :)

I’m going to be in Washington, D.C. for the next week (give or take a day). I’ll be staying in Arlington, VA and plan on utilizing public transportation while I’m there.

Any unconventional recommendations or things I should know?

I'm spending 5 days in NYC starting next week. While I've traveled plenty, it's almost always been alone, frequently short term (2-3 days including flights in and out), and work related so I had people to either ask for suggestions or just went out on my own. If the trip didn't fit into the above categories it was typically to somewhere I'm relatively familiar with or had a lot of lead time to prepare my trip.

That is not the case right now. I've never had any interest in NYC so I don't have a list of places I'd like to experience in my head, I don't have a ton of time to research a plan and filter out all the "top 10 things to do in NYC" websites, I'll be with my wife so going off wandering on my own isn't an option, and this will be the first trip where I don't have a rental car to just go get lost in and see where my randomness takes me. I'm also not the tourist type so there's no interest in "the tree" or Times Square, etc.

So I beseech you fellow Tilderinos, as someone that doesn't care about being a tourist, doesn't have a social media presence to feed I'm-here-and-you're-not selfies to, and needs actual destinations to go to due to a lack of independent mobility, what should someone with pretty much 72 hours of completely free time in NYC actually do?

I recently went into my attic and pulled out my old 1990s 4-track Fostex X-26 tape recorder. I was hoping to transfer some of my old band tapes to the computer. Alas, it is dead. While it turns on, the motor appears frozen, and the device hums. (I don't mean there's line noise when you plug a speaker into it, I mean the device itself audibly hums, even when not using the tape controls.)

I have seen online that some people repair theirs. It's probably beyond my skill level to do so, though. (And I don't really want to do it myself.) I have contacted a few shops near me (Los Angeles), but have gotten no replies, unfortunately. I was wondering if anyone here knows of a good shop that would repair an older device like this.

I have also contacted some places that claim to do cassette to digital transfers, but none have replied to my questions about whether they can deal with a 4-track recording. Also, just looking at their prices, it seems like it would cost significantly more to have them convert my tapes than to get the recorder repaired. (And I'm not sure what's on all of the tapes, so I don't really want to hand over some embarrassing practice tape or tape containing some out-of-context banter between takes on it.)

I've looked online for a used one, but all the listings I've found have been "for parts only", which is what mine would be if I were to sell it. And knowing how these things go, they probably all have the same broken part. So any recommendations are appreciated!

Back when I was a kid, I had a radioshack 200-in-1 science fair electronics kit this one

I loved that thing, and it sparked an interest in tech that ultimately led me to a CS degree.

Id like to buy something similar for my much younger sister, but nowdays everything I can find is arduino or raspi based. Id love to get something like that eventually, but I think it might be better to get a kit that more focuses on individual components first... Does anyone know of one sold these days?

Alternatively, if anyone has one of these and would be willing to scan the book, Id love to build one of these as a breadboard-based system.

Being cooped up inside has made me realize how much time I spend in front of screens, for work and for play. I think it would be healthy for me to try to find something that's not screen related to do but remain socially distant, and I think learning to play an instrument would be a good candidate.

The problem is, I don't know which one to learn. When I was in middle/early high school I played the drum set, but having moved out on my own I certainly don't have the space for that anymore. I also thought about the recorder, since people play cool medieval music on it, but I'd rather not subject my neighbors to the shrill monstrosity that is someone learning to play recorder. I like the type of music that can be played on a guitar, but ideally I'd like something physically smaller, and perhaps a little more interesting. Also, for social distancing's sake, it would be ideal if it was an instrument where it is possible to teach oneself how to play.

Am I overcomplicating things and should just learn guitar? Are there any instruments that hit inexpensive, self teachable, small, and can be used in music in ways similar to a guitar?

Got it last summer and been having and absolute blast with it, got a macro tube and a bigger 55-300 lens to play with. But time and time again I keep running into annoying little limitations.

This model doesn't have a shutter release input thing, so remote shutter is locked behind a falling apart android app>bluetooth connection. There's a tonne of small little things like this that I wish I looked into before making the purchase

Essentially - right now I'm thinking that I want to upgrade the actual dslr before investing any more into lenses, but I'm a bit too out of touch to know what the good models to go for 2nd hand or whatever.

Are there any tildoes out there that have some experience with older but capable bodies?

Hi. I recently realised that I don't do much is a sense that I only do two or three things all the time while on my free time, and those are usualy just watching youtube or browsing interenet in general. I am the kind of person that finds anything interesting when I start, but I usually drop it if there is a learning curve right at the start (eg. lockpicking). So any of you have sort of a hobby that would suite me?

So I'm looking to get a nice pen for school (£25 max). Metal pens appeal to me although I'd be interested in others too. If anyone had some suggestions for nice pens that are suitable for long periods then it'd be brilliant :)