Growing up we had a carpet washer we would use once a year or so, but we had a dog and 3 messy kids.

Now that I'm grown up, I'm wondering if people regularly wash their carpets. I know you can rent some powerful units from local stores or get a portable one yourself, but Im actually wondering how common this is for people to do somewhat regularly (vs doing it when necessary due to pet accidents)

Hi everyone... I am trying to build a gravity fed watering system for my ducks. I want to have a 5 gallon jug up top, and quarter inch tubing running down into the coop area. I have a float valve, and tubing, and brass compression fittings. Everything is a quarter inch, and everything is fitting together really nicely.

However, I have no idea what part I am supposed to get that connects the compression fitting to the upper jug. There has to be a part that goes inside the jug, has a washer of some kind, and pokes through the jug, so that the compression fitting can screw onto it. Otherwise there is nothing to hold that piece to the jug. Reference Image

I have never built anything like this and I am trying really hard. I've gone to three separate hardware stores to just kind of look at all the pieces, but it is so disorganized and all the tiny shelves just seem to contain random parts that don't match the label. There are acronyms I don't know and can't find any forums for this specific project. All the animal waterers that are online require a hose or electricity and I have neither of those, hence needing it to be gravity fed.

I am starting to get really really discouraged :( I don't even know what question I am supposed to be asking. I just want to connect the tubing into a 5 gallon jug without it leaking out, but right now I just have a compression fitting stuck into a hole in a jug and nothing keeping it in place and all the water leaks out the side. Apologies if this is the wrong section to post this.. Thank you in advance if you have any advice.

Basic Household Tool List

(Edited to add suggestions from the comments and the general philosophy of this list)

• Tool bag (at least 15 inches long)
• Hammer (12 or 16 oz)
• Rubber mallet (white head preferred, non-marking)
• 6 inch Needlenose Pliers
• 8 inch Slip Joint Pliers
• 8 inch Crescent/adjustable wrench
• 10 inch Slip groove (large jaw) pliers
• Box cutter (optionally folding) + set of replacement blades
• Hacksaw + spare blades
• Scissors
• 25' Tape Measure
• Set of precision (small) screwdrivers
• #1 and #2 Phillips head screwdrivers
• Small and large straight blade screwdrivers
• Multi screwdriver with torx/phillips/straight blade heads
• half-round file (h/t @patience_limited)
• a metal putty knife or a 5-in-1 combination paint scraper (h/t @patience_limited)
• roll of twine
• roll of blue masking tape
• roll of Gorilla tape
• roll of black electrical tape
• super glue
• small bottle of wood glue
• 2" paint brush
• torpedo level
• small flashlight
• a strong neodynium magnet - to use as a stud finder and for many other things (h/t @the_man)
• 9v batteries
• AA batteries
• AAA batteries
• 50 1" #6 wood screws (zinc/steel, not brass)
• 50 2" #8 wood screws (zinc/steel, not brass)
• small box of 1.5" finishing nails
• light and heavy duty drywall anchors
• course and fine foam sanding blocks (h/t @patience_limited)
• 5 gallon bucket
• safety glasses
• N95 masks
• leather work gloves
• foam ear plus (h/t @the_man)

Bonus list (things that are more expensive or nice-to-have upgrades):

• a stud finder - the cheap ones are worthless, buy a good one or not at all (h/t @DeaconBlue)
• a battery powered drill + bit set (h/t @patience_limited)
• a set of metric and imperial allen keys (h/t @sublime_aenima)
• a basic socket set with a mix of metric and imperial sockets (h/t @auk)

The philosophy of this list:

A good starter set should include tools and supplies someone will be glad they had that they didn't know they needed. Even if they aren't "handy", a handier friend might use them (and they learn something in the process). It doesn't include very specialized things like demolition, electrical, or plumbing tools. If you're going to undertake projects in those areas, you should know a little about what you're doing, and you'll be able to buy the right tools for the specific project. As as electrical engineer, I particularly don't include a multimeter because I don't want to encourage someone to mess around with electricity if they don't understand how it might hurt them.

This list specifically does not suggest brands (except where the brand is the thing, like Gorilla tape). Opinions on what brand is best vary widely, but my general suggestion is this. Don't break the bank buying high end tools for someone who may never use them. A $2 hammer is going to be fine for someone who uses it once a year. If they are using them often enough to want something better, they can buy something better (or you can buy it for them).

Hi, I have a weird cubic space in my garage wall due to the location of the chimney and stairs to the basement.
The lower edge of that cubic hole is at 41 inches (104 cm) from the floor. Its deep is 40 inches (101 cm). Width 39 inches (99 cm). Height 46 inches (117 cm).
Too deep for static shelves, I cannot reach the end. Too tall for sliding shelves (kind of drawer thing), I am 5'7'' (172 cm). In its current form, it is too much of a space for its practical use.
I thought that a carousel that moves shelves up and down (like in this design for shoes https://storagemotion.com/shoeselect/) but for heavier weights would be practical... I have no idea how to even name the parts to buy them, if they exist.
Also, I will appreciate suggestions for an alternative solution.
Thanks.
PS: located in Massachusetts, US.

One of the things I want to do when I purchase a home is not subscribe to the whole lawn culture, not just because I hate lawn care, but because I think they're ugly and boring. I want something a little more eco-friendly and more comfortable to be in. I'm thinking fast growing trees, bushes, tall plants, etc.

Has anyone on Tildes attempted such a conversion? What are some tips you'd recommend?

Anyone have any ideas for a cool project involving an old school satellite dish? It's maybe 6-8 feet in diameter. I've seen some stuff like make an art project or an umbrella but I was hoping to use it for picking up signals again. I don't imagine I can use it to get TV but is there any satellites from universities or maybe hobby cube sats that I might be able to use?

Apologies if this is in the wrong topic it was this or ~space.

It took me a while to find a good, non-destructive way to put up posters in my living room. I think I started with blu-tack, which dried in a few months and the posters came down. Then I tried 3M's hanging strips, which stayed on the wall for longer, but was pretty expensive for what it was. A year ago I had the idea of using velcro that has adhesive tape on the other side. So far this has worked near perfectly for me.

I know I'm not breaking new ground here, but I was happy to finally find a decent solution. Well, at least for light objects on walls (and elsewhere).

I am putting a new surface on my Deck. I am using Trex and 2.5" composite specific screws. These are small head screws with a T20 torx bit.

[img]https://i.ibb.co/MchtXPx/20230628-175119.jpg[/img]

I am 7.5 boards in out of 25 boards and I have destroyed 5 bits, 3 of them brand name impact rated bits. I am making sure to stay cammed in, and weight on top of the screw. I am lining the drill up with the angle of the screw. I am also predrilling every hole.

I feel like I have to be doing something wrong. I just don't know what else to do.

Edit - these are the exact screws I am using - https://www.homedepot.com/p/Grip-Rite-9-x-2-1-2-in-Brown-Star-Drive-Pan-Head-Coarse-Composite-Deck-Screw-10-lbs-Pack-N212CSB10BK/207193648

I've got a basic garage in the backyard - essentially a sheet metal shed with a concrete floor. It would have been built in the 1980s so I doubt the concrete slab had a water barrier - or if it did it probably wore away over time.

When we have wet weather, the concrete gets damp underneath items on the floor - like rubber mats etc. There's also some mineral staining. Doing some reading online, it looks like concrete efflorescence.

I'm considering demolishing the shed and building a better workshop (insulated etc.) on the existing concrete slab. Can I make the existing slab a usable floor by sealing it with something like epoxy? Or would I be better off using the slab as a footing and building the new structure on posts with a separate floor suspended above the slab?

My goal is to avoid getting any damp or mould in the new structure.

I’ve always been a bit nervous of bleach. My white counters in the kitchen have been picking up stains, so I bought some bleach and have left it to sit. Hooray, the stains are gone!

BUT. Then I googled some bleach tips and discovered that you absolutely shouldn’t use undiluted bleach on your counters because it can ruin them 🤦🏻‍♀️

I didn’t pick up a lot of cleaning knowledge from my parents, and it’s been a lot of trial and error (so much error) figuring out how to keep everything clean enough. Now I have schedules and products and I do a pretty good job of it, but I moved out of home at 18 and I’m now 36 so it’s been literally half my life getting to this point.

So… what cleaning tips and tricks do you have? What product (remember to specify which country you’re in!) can you absolutely not do without? What products can be used for something unusual? Let’s hear it!

I'm thinking first order of business is cleaning and then I'd like to paint, and then cleaning up the unkept yard. But I still haven't even moved yet and I know reality will be different.

Does anyone who's been in this situation before have some general advice?

I'm in England, this is going to matter with this.

My wife's business has outgrown a small office space. She does HTV clothing and accessories, mugs, etc. Basically, personalised vinyl and sublimation. The equipment she uses is large, A3 printers, dye cutter (Cricut but about to get an A2 bad boy) and probably an A2 printer too.

I've been looking for 5m squared log cabins and similar. Something like this would be an ideal shape. One wall, floor to ceiling, will be dedicated to storage of vinyl, mugs, t shirts, etc. hence thinking there's no point in going A frame style.

I'm assuming 15cm deep concrete base by whatever size the cabin will be, squared, plus 30cm to make sure the base is big enough.

Thoughts?

Do I build something myself or spend out on the Lego cabin style everyone seems to be selling in 44mm timber? Do I put in the base and build my own cabin around it using straight timber and sheet materials from merchants?

There's two main factors for me, cost and insulation. As she's using it for storing clothing it needs to not get damp so it'll need to be a good material and probably will need a dehumidifier in and on all year round when the door is closed. Do I sheet in layers with insulation foam?

Anyway, you get the idea. Links and general advice is welcome.

My girlfriend and I have been in the market for new computer chairs at home, as we have been getting increasingly uncomfortable in our existing chairs. We are both shorter people (both under 5’5”) and the problem we’ve been coming across is in most chairs (even the ones I’ve found for “short” people) tend to have seat depths of 16+ inches. What ends up happening is the edge of the seat ends up pushing into our calves leading to bad posture because we can’t sit up fully to the back of the chair unless our lower back gets leaned forward a bit due to the size of the seat depth. This leads to bad posture and back pain.

So I’m curious fellow short people of Tildes, does anyone have any recommendations for a more comfortable and ergonomic chair for short people?

I’m going to be replacing my mattress soon, and there are a lot more options available now, including many that I can order online instead of having to go get from a furniture store. Every time I’ve tried ones out in the store it’s always been a crapshoot as to whether or not I actually like it once I get it home, as I can’t really get a good feel for it there. As such I’m more than willing to go with the convenience of an online brand, but would rather hear from some people besides sponsored YouTubers first.

What brand of mattress do you sleep on and like? Any brands you had bad experiences with and would avoid?

I’m building a new home and we have hard water around here. I want to save our brand new plumbing and fixtures from being loaded up with deposits from day one. I’ve never used a water softener before. What’s the best route to go?

It's six months and I haven't spent it yet.

What do I need that I don't realize I need?

I already have multiple monitors, keyboards, etc. Separate headphones (that I don't use because I don't need to shut the door often), microphone (doesn't make a difference), and other obvious tech toys. I bought a new UPS right before I started the job.

It's a nice problem to have: "I don't need anything." But surely I should spend money on SOMEthing?

I recently moved to a place with harder water than I'm used to (more minerals). It tastes bad, it makes my detergents less effective, it forms soap scum everywhere, and it's definitely not good for my appliances. Does anyone have advice on how to deal with this in a cost-effective way?

I unfortunately can't install a point-of-entry water softener here. I can theoretically install point-of-use softeners for each of my appliances (bathroom sink, kitchen sink, dishwasher, washing machine, maybe shower), but the portable ones cost like $300+. I can't decide if it's worth the purchase. I also don't know enough about the different kinds or whether they're available in portable formats (reverse osmosis filtration, potassium chloride water softening, and sodium water softening; maybe others). Does anyone have recommendations?

I recently bought a showerhead with a better filter, which will probably help reduce skin irritation, but it can't actually remove calcium or magnesium. I can't visualize what a genuine point-of-use softener for a shower would even look like or how I would attach it to my showerhead, and I don't know where to get one that isn't just marketing fluff.

I have some CLR that I intend to use with my dishwasher, but I don't want to have to buy this stuff constantly (just another cleaning product in my cabinet). And I have a Brita for drinking water, but was thinking of getting an under-sink filter as I don't like waiting for it to refill; I have no idea how much to spend on this or which brands are best.

Happy to hear everyone's thoughts on household water management!

Hi all, I'm becoming almost certain that my apartment is dealing with a minor bedbug infestation. Do any of you have experience dealing with the things? Specifically, my unit shares a building with about 20 others, so has anybody dealt with infestations in a similar situation? I'm wondering if a heat treatment is even possible or realistic.

I got a cheap mop at the grocery store last year thinking that would be enough, but it broke like a month ago and always left smudges all over my floors anyway. I never really liked it. It was one of those fixed sponges with a handle to squeeze it out rather than one that looks like Medusa.

I have wood laminate floors throughout my house, not true wood floors. Unfortunately, they're dark brown and show a ton of crumbs and smudges, so I'm looking for something sorta in the buy-it-for-life category. I.e. willing to shell out a little more if it makes a difference. I've had a vacuum for a year that has been good for all the crumbs (Miele), and I really love it.

Also what soap should I be using for best results?

Thanks, all!