CES 2025 kicked off with some big hardware announcements.
But what else are people excited (or not excited) for that doesn't necessarily deserve its own thread?
I imagine most people don't save or just keep images together with the photos they've taken on their phones. But it would be nice to have a simple place to store and organize those images.
I've seen these recommendations: https://tildes.net/~tech/1l48/pinterest_alternatives , but I don't know if that's the best format. Maybe I'm just overthinking it. For now I only have a folder on iCloud with sub-folders. Quick and simple, syncs across devices, but not super organized.
So bit more than one month ago my very old Microsoft Sidewinder X4 keyboard broke the membrane on the 'A' key, meaning it was effectively kaput. I decided that I wanted to try a mechanical.
My use-cases are as follows, in the order of importance:
These were the first requirements I settled on, based on my limited knowledge of mechanical keyboards:
With these requirements I eventually settled on Keychron Q6 Max with Jupiter Brown. But just before ordering one, I started thinking about the height of the keys on a normal old-school mechanical.
I don't remember when I have last used one, all my recent keyboard had been modern low-profile so I didn't have a reference for what I was buying other than images.
I started reading about wrist problems from keyboard height and the recommendation of a wrist rest. I looked at the Keychron options and saw that they only had rests that were completely detached from the keyboard.
Thing is that I move my keyboard around my desk a lot, so I figured that having a wrist-rest that was not attached would become an annoyance.
After this I decided to just stick to what I am used to and added another requirement:
Unfortunately when you set requirements for 100%, ISO, and low-profile, then the otherwise extensive Keychron catalogue becomes super limited. So I started looking elsewhere.
At the time there was a new post about a search engine on the /r/MechanicalKeyboards front page.
Using this I discovered the Cherry MX 10.0N. This seemed like a good deal. High quality all-metal body.
The only real sticking point was that the switches are linear with very short actuation, but I liked the look of this keyboard so much that I decided I could probably learn to live with it.
The keyboard looks great in person. The all-metal body feels very solid and high-quality. It's got good heft and sticks to the table. The entire board is very thin and feels good to rest on.
The keys also feel high quality with minimal wobbling, and long keys sound and feel the same whether pressed on the edge or in the middle.
That's all the good stuff. Now on to the less good.
The adjustable foot in the back has no real positions. Meaning that there is no point in adjusting it where it will click in place and stay there, and it is under constant spring pressure to return to the stowed position. This means that the only thing keeping the extended foot in place is the weight of the keyboard. As mentioned I move my keyboard around frequently, and this means that everytime I move it I have to readjust the foot.
Additionally, it's highest position is sort of a balancing point, meaning that it you are a bit off, or accidentally push the keyboard a bit in this position, then the foot will suddenly collapse.
It's a minor annoyance, but one that is unique to this keyboard since I don't see this kind of foot design anywhere else. Otherwise the full-length metal foot is really nice, if only they had added proper click positions in its travel.
As mentioned, these are linear with very short actuation. CHERRY MX LOW PROFILE RGB SPEED switches to be specific. My first thought when trying to type with these was "Oh my god I hate this, how can some prefer this?!".
Constant mistyping was the name of the game. I was so used to being able to slightly miss a key, but still only actuate the intended. But that doesn't fly with this keyboard. If you depress any key even the slightest, it WILL actuate.
For gaming I first didn't understand why I sometimes kept jumping. I eventually figured out its because the mere weight of my thumb resting on the spacebar can be enough to actuate it sometimes.
After 1 month of regular usage, I can confidently say that my thoughts are now "Oh my god I hate this, how can some prefer this?!". Okay, I improved my typing somewhat to maybe half my mistyping. Gaming is still a pain, and I've had to regularly rest my thumb on the table instead to stop the sudden jumping.
Unfortunately this keyboard does not have hot-swappable switches, so there is no fixing it unless I want to buy a soldering iron and replace every single key, which I am not willing to.
So while the keyboard is technically 100%, Cherry has still designed it to be as compact as possible. One area where they have shaved off the length is the spacing between the main keys and the arrows keys and those above. Aswell as on the other side with the numpad.
I didn't know this prior to puchasing this keyboard, but apparently this spacing is essential for my muscle memory to be able to find those keys. The lack of spacing has meant that maybe 25% of the time I use them, I press the wrong key.
Now the issue with the switches and spacing is really an issue of preference. These aren’t quality issues. They were designed this way because some people like it (somehow). So if this keyboard looks interesting to you, and these preference design choices don't bother you, then I can only recommend the Cherry MX 10.0N. It really is a very high quality keyboard.
For me though, I just can't overlook these choices, so I have started looking for another keyboard again. I'm currently split between the Cherry KW X ULP and Logitech G915 X Lightspeed. None of them are full-metal body unfortunately. The cherry one seems to be the higher quality, but the the key caps remind me of laptops keys, which I really hate the feel of. Maybe I'm overreacting to it. The Logitech one is lower quality, but has all the the features that I would want. If you know of something better then please do leave a comment. I might reconsider my low-profile requirement. I'll give it at least another month before I become serious about switching again.
I saw a similar thread recently and since I also happen to be looking for a gpu, I thought I'd ask here as well.
Soo, I suppose I should start by saying that I really do not know much about hardware. All the computers I had were purchased pre-built and I didn't really open them up apart from occasional cleaning or plugging in a new drive. Either way, my current hardware is as follows:
So the 2 things worrying me here are:
As I said earlier I'm really clueless about this kind of things and I'm not sure where to start, so I don't even have any candidates. Generally, I don't do too much gpu-intensive stuff (which is why for a long time I've been fine with an iGPU) and most of the games (2d stuff like various roguelikes or Factorio) I play run fine, but recently I've been playing some more games like Fall Guys or Supermarket Together with friends and it's been a bit frustrating to lower the graphics settings to the very lowest they can be and also decrease the resolution to have them run at a playable framerate (though even Factorio has been having some frame drops recently as my factory keeps growing, but I'm not sure if it's actually the igpu causing the bottleneck).
Any advice would be appreciated! I can provide more information if there's something relevant I haven't mentioned (which I imagine is quite possible)
Edit: I am now instead considering a full upgrade, since it might make more sense as people pointed out
Edit2: a pretty important thing I forgot to mention is that I primarily run linux, so driver compatibility is a big thing for me.
Hi all. I need to set up an outdoor CCTV camera and since there seem to be a hundred different brands and as many pitfalls I'm wondering if anyone here can help me navigate that minefield. I have zero experience.
I have the following basic requirements:
With regard to what happens to the footage:
Optional bells and whistles:
Thanks in advance if anyone knows enough to be able to help.
OK, maybe they did something wrong; not actually giving people all potentially available discount codes when you say you will is wrong. But I don't think they did anything wrong by overriding affiliate links, and I think it's dangerous to let people convince you otherwise.
Even if replacing affiniate codes has negative consequences, in the form of lost revenue and uncounted sales, for the affiliates, it is happening entirely in the end user's browser, and in that environment the user has the right to do whatever they want. One can get extensions that strip off all affiliate codes. A user might have a case that their informed consent was not obtained by Honey for one feature or another, but if a user wants to install a browser extension that replaces all the affiliate codes in links they click, they have a right to do that and no affiliate marketer can be rightly empowered to stop them.
If we admit some right to control the user's browser's behavior on the part of affiliate marketers, why would that right stop at interference by Honey? Wouldn't any extension interfering with the sanctity of the affiliate marketing referral data then be a legally actionable offense?
I am currently looking at replacing my GPU, as I believe it is broken. I do not want to spend a high amount as money is a bit tight for me. However, I am open to spending a bit more than the cheapest option, if it will last me longer.
I do not do need that strong of a GPU, since I primarily play games a bit older and I occasionally do video editing. For video editing, my video projects tend to be relatively lightweight, so I do not need a beefy GPU for it.
A couple game examples:
For budget, I am trying to stay as low as possible. However, I do want to buy new, as I am pretty sure my GPU is the problem, but do not know for sure so want to be able to return it. For OS, I am running Fedora KDE. I had my GTX 970 working with it, but I have heard AMD cards work better for Linux. Is switching to AMD better overall or just easier to setup?
Edit: After some suggestions, I am currently leaning towards the RX 6650XT for $330
I've been self-hosting for a few years. However, now I have a single server hosting all of my things whereas, before, I had multiple old machines physically isolating services. I'm getting ready to host a game server or few (at least one for Tilde) on this machine.
While I'm not a neophyte to Linux, I'm not a guru and definitely not an infosec expert.
Given that, what steps do you take to secure a Linux server, LXCs, and docker containers that are receiving port-forwarded internet traffic?
FWIW, I expect I'll have an LXC running docker containers. I can instead run a VM doing same.
Advice welcome!
The other day I was in Target and they had a keyboard display, and in that display was a SteelSeries Apex Pro TKL. For those unfamilliar with them, they feature what they call omnipoint keyswitches, which basically means that they are all essentially analogue inputs, which means you can adjust the actuation point in software.
I know there are a lot of keyboard enthusiasts here on Tildes, so I thought I'd ask what you thought about it. While I'm probably not going to buy one anytime soon, I'm interested in it. But I'd also use it almost exclusively for typing, which isn't really the target audience for it. I generally prefer tactile switches but I realized while demoing the Apex that I've been using rubber dome switches so much in recent years that it doesn't matter too much.
Seems to be a common subject online that pinterest sucks. I've found so many threads of people asking for alternatives...but I've yet to find a replacement, or really recommendations.
I've been trying out the site cosmos.so, Interesting concept but it is limited by the lack of android and Firefox plugin support
Any suggestions? What I am looking for is a tool that I can use to save stuff I find online, links, images, screenshots. Preferably open sourced or privacy friendly, but at this point I'll take anything lol.
I feel like there has to be something out there!! Not sure why I am having such a hard time finding it. Any recommendations would be appreciated
I was contacted by a recruiter regarding a job in my field but they wanted someone with data analytics skills. I'm taking this as a sign that I should improve my skill set. Does anyone have advice for where or how to start with a very small budget?
Thanks for your help.
Hi folks--I am very excited about a gaming PC that I just bought for my family (mainly 13yo son into gaming, coding, and digital art).
I installed the video card (only piece sent separately), went through Windows setup/updates. Installed peripherals. Updated video card drivers. Installed Steam/GIMP/Krita. Made 13yo an adult in my Steam Family. Installed a few of the games so something is ready to run right away. I even have the small Wacom tablet working in GIMP and Inkscape with a good pressure profile!
All that said, I used to set up my own Windows PCs (looooong) ago, and I'm wondering if it's really that simple. It was very easy.
I did small utility things like run Startallback and install PowerToys. I figured MS Visual Code is next?
Anything else you all can suggest?
(P.S. is there a way to move all his Minecraft stuff to his new Microsoft account? He's tired of logging in as me, and I'm tired of sending him auth codes.)