So our freezer is dying. Our fridge is over 20 years old and has served us well, but it's time to move on. Given the reputation of modern appliances, the proliferation of smart appliances, and the current class-action lawsuit against LG and Kenmore over faulty compressors leading to fridges dying after just five years, I figured I'd ask for some recommendations on good brands.

For specifics, we don't need or want any fancy features beyond an ice maker. We'd prefer it to not have any smart features, just a good old simple fridge/freezer that can be expected to function fine for years (again, we've had the current one for 20 years). My mom says she'd prefer a fridge with a bottom freezer compartment, but I don't think that's a deal-breaker (our current one is a side-by-side) so long as it's a good model.

I'm currently working on decluttering, and coming up with processes to stop clutter from building up in the future.

Even after getting rid of a bunch of junk, I'll be left with a ton of stuff that historically has just "floated around" my living space (cables, adapters, small tools, stationary, batteries, etc...).

I'd ideally want a bunch of appropriately sized containers that I can organize stuff into. I'd love for each box to be some tesselation of a standard volume, so that I can arrange and stack those containers neatly in a drawer or on a desk.

If you happen to work with 3D printing, this may sound a lot like Gridfinity, a modular open-source grid storage system. And I agree! Gridfinity's goals completely meet and shoot past what I'm looking for. But I currently have no interest in investing the money or time into buying a 3D printer and making prints. And there doesn't appear to be an obvious commercial version outside of "random" folks on Etsy.

I also considered getting a Drawer Grid like you'd see in a Maker Space. I might end up getting this if I can't find a better option, though I'd prefer a storage solution I can stuff in a drawer.

I was curious if:

• Anyone had any product recommendations that might fit the bill
• Anyone had any thoughts on the organizational endeavor itself, and if there are any ways I could be going about this better.

Hey all,

Bought a house 2 years ago, and have had a handful of issues where I had to call someone out to take a look. Whether its plumbing/HVAC/whatever, sometimes they are clearly things I couldn't do myself, but other times, it feels like something I could probably do if I put aside the time.

Most recently, our sump failed resulting in some flooding and we had to get it replaced, which ended up costing $700 USD. I know pumps only cost around $300 and generally understand what work needs to go into replacing it, but was worried I may miss something crucial, especially when replacing the piping and screw the whole thing up. On the flip side, I've had a lot issues with our furnace, so the last time an issue came up, I spent an hour on Youtube and just figured it out myself.

Sometimes it just feels silly spending a bunch of money on labor, when its something you could spend an afternoon doing yourself. It just feels hard to gauge when its worth investing the time to figure it out myself or not. I also never know what to do in the situation when the person who took the time to come out gives me a price, it feels like your essentially trapped at that point.

Anyone with more home ownership experience have any advice?

I received a quote from a local contractor to do some home remodeling. Some of the numbers make sense, but some seem quite high. Like, I can't believe it costs $3k in labor to install an electric fireplace insert, or an island hood. Anybody have any insight they're willing to share on this quote?

Remodel estimate

1. Planning and asbestos test $1,190.00
2. Move range outlet $1,514.00
3. Island hood $4,498.00
4. Electric fireplace insert $4,133.00
5. Main bathroom $36,552.00
6. Hall bathroom toilet and fan with humidistat $3,579.00
7. Concrete landings outside the front and back doors, front siding flashing $2,899.00
8. Re-pipe plumbing $14,993.00
9. Bedroom window glass replacement $749.00
   Total $70,107.00

Description
Plans will be refined. Drywall will be tested for asbestos content.
Dust will be contained and floors will be protected.
The range outlet will be moved.
An island range hood will be installed. The placeholder hood in the estimate is a Zephyr Brisas.
An electric fireplace insert will be installed. The placeholder fireplace in the estimate is a
Dimplex 500001756.
The main bathroom will be remodeled. The shower will be replaced with a pre-formed shower
pan and Corian walls, and two shower valves and shower heads will be installed. A sliding
shower door will be installed. The floor will be tiled. A new vanity cabinet, countertop, sink, and
faucet will be installed. A new toilet will be installed. The vanity electrical outlets will be
lowered, a larger lower mirror will be installed, a new vanity light will be installed. A ventilation
fan and light will be installed with a humidistat/condensation sensor. Drywall will be patched.
New baseboard trim will be installed. The bathroom will be painted.
The hall bathroom toilet will be replaced. A ventilation fan with a humidistat will be installed.
Concrete landings will be poured outside the front door and outside the back sliding door. The
front door landing will be about 5-1/2’x4’ with a curved corner. The back landing will be about
3-1/2’x3’.
The plumbing in the house will be replaced. Drywall holes from installation will be patched and
painted.
Window glass will be replaced in the bedroom with the broken window pane.
Everything will be cleaned up.
All labor and materials are included.

Thank you!

I know for basic living for one single person and no pets, a bathroom, and kitchen+living room+bedroom are the bare essentials. So basically a studio.

What I'm looking for is some opinions on what separated rooms are needed/wanted for a house, and also how needed/wanted are they? I'd say the bathroom and "studio" room would rank as #1 and #2, unless you plan on having the "studio" area separate. In that case, these are ranked as:
Bathroom -1
Kitchen - 2
Bedroom - 3
Living room - 4

Maybe add in closets here and there, and a laundry room?

Bthrm closet - 5
Laundry - 6
Bdr closet - 7
Pantry - 8
Lvgrm closet - 9

But I know nothing of what rooms are necessary (or lesser known possible rooms/areas) for living, or even how big they should be. I know in my state, NC, the bare minimum is 720 sq ft, so shooting for slightly over that would be ideal for me. I don't want to have a huge house to clean, and I love cozy, small spaces. If I want to see some larger space, I'll look out a window or go outside.

So what would be your numbered list for priority rooms in a house?

Hey all. I have a room that's currently lit (during the night) by two light fixtures attached to the same wall and on the same switch. Each fixture has two LED lights with a 2700K or 2800K color temperature (don't remember exactly), 230lm brightness, 3.9W power consumption, for presumably a theoretical total of 920lm and 15.6W. These bulbs are angled some 45 degrees forward aimed at the (white) ceiling in order to reflect diffuse light for the rest of the room.

I'm going to add two tall bookcases to that wall which are going to cover where the lights currently are, so I need to figure out another solution for lighting. I don't want to damage the ceiling. Currently, my idea is to extend the wiring from the walls up behind the bookcases and place lights at the top of the bookcases, similarly angled forward so they reflect off the ceiling closer to the middle of the room.

But I'm not finding appropriate fixtures, devices or anything else that I can place on a horizontal surface in order to angle a directed diffuse light forward. The closest I have right now would be something like these outdoor waterproof floodlights.

They have a number of problems, though, chief of all the temperature being 3000K (that's the lowest available; you can get them a lot colder). For some reason, no one seems to be making 2700K/2800K versions of these. I'm afraid if I buy these, the light in this room will be noticeably different from the rest of the house. They are also very bright at 1000lm each (these are the darkest available; they make them even brighter) for a total 2000lm, more than twice the current brightness. I'm afraid if I sit in a room lit by these, it will affect the quality of my sleep.

Does anyone have any ideas that might yield something closer to what I currently have, but which can be placed atop the bookcases and directed forward and up, as desired? It's also important that replacements don't require waiting for a 6 week cargo ship voyage from somewhere in China, that the power consumption isn't significantly higher, and that there won't be some huge monstrous device on the bookcase visible from the ground.

I'm in the market for a set of dishes. The consensus is:

• Corelle - lightweight and solid
• Fiestaware - built to last

I'm not a fan of either unfortunately. Not because these brands are bad, but I'm looking for a particular look. Something akin to stoneware with a darker color. I also prefer heavier dishes. Unfortunately stoneware is known (or said) to chip easily. I'm not looking for something that will survive being dropped (I don't remember the last time I dropped a plate). This is the first selling point that gets brought up I've noticed.

What did you choose and what has been your experience? Has your stoneware chipped after washing & stacking?

EDIT
I forgot to provide more details about my situation to help with recommendations.

• I'm in the US
• No family/single, but plan to host for a small group on an occasion (~4 people)
• I'm starting from scratch and would like a set that works in all situations + everyday use. I'm willing to splurge (assuming it's quality and lasts).

Any advice on how to clean & control dust in the home?

I live in an apartment with no central HVAC, and i suppose certain life choices contribute to excess dust build up.. like

1. Air drying clothes-- All the fibers & dust don't get trapped in the dryer, they kind of stay on clothes until they dry and fall off in my apartment
2. windows are left open (depending on weather)
3. working on sewing projects

Not willing to change any of the above, so i might just have to deal with dusting all the time.

But dusting itself is difficult... Dusters that move dust off surfaces seem perpetually inefficient and can't capture 100%.
Wiping down surfaces is better but even microfiber cloths don't pick up everything either. Clumps up weirdly. And don't want to use a wet rag for dusting off books e.g.

Any suggestions are appreciated!

So here's my situation and what I'm trying to prepare for. My mom is currently sick (we think it's an infection), and last night she fell and threw up, scared me half to death. She says she's fine(ish) now, and we're waiting on test results. It got me thinking how she said I'll inherit her Siamese cat breeding business and it got me thinking a lot about it.

I'm wanting to divide what is currently a purely aesthetic room so the queens can have more room for their kittens who then won't get to hide under/in the couch (yes, inside the couch, because they tore holes in the fabric underneath it, apparently) whenever I try to show them to customers.

I want to divide my dining room from the entry way, where the front door leads into the living room, so the cats don't escape out the front door. Imagine a hallway (12 to 14 feet long) from the front door to the living room (and it's a double wide doorless doorway connecting it to the living room), but one wall of the hallway doesn't exist, and instead opens fully into the dining area. I haven't measured yet, but I'm estimating it's around 12 to 14 feet across, and 9 or 10 feet tall.

I'd like to use something budget friendly (ofc), like plexiglass, acrylic, resin, whatever. Something fully see through (or as see through as possible) so the customers can see them immediately. Proper glass will need a whole installation process and will add to the cost. Also, I'll want to add a door to this new "window wall" so the customers and I can walk in and out, and preferably have it be a sliding door, since I think this is the option that will be the least likely to pinch a kitten.

My dad suggested a garage screen door, with magnetic closing, made of fiber glass mesh, but I can already tell the cats will eventually tear it up and make it look ratty, and also slip out from under it most likely.

We can't use normal room dividers because our cats can sometimes jump from the floor to the top of the fridge, and room dividers are too flimsy. Also I'm not sure how to fasten a door to them (maybe I could just open them, but idk).

I've also half-way crossed any meshes, cages, or fencing off my option list because it looks ratty imo. Btw when I say "ratty" I mean it will make me look like some backyard breeder or someone who doesn't care about her cats. I don't want my kittens to look like inmates lol. But cages/metal bars are a last resort, because I need something, as right now my mom has them set up in what I personally consider to be cages that are far too small to keep the mother cat in 24/7 for 2 to 4 weeks. The mother cat can just about lay down once you have to put the litterbox in. (It's the vertical one with the 3 tier platforms, with wheels and a bottom tray that you can find on amazon)

I've looked all over amazon, just window (lol) shopping/browsing for ideas on what I could use, and omg. Either inflation is horrible, or I'm severely out of touch with what a "budget" option for this project would be.

I've even gone so far as to consult ChatGPT, who was not really that helpful.

A list of things I've thought about already are:
-Garage screen doors (cats will eventually scratch through and slip under)
-Sliding barn doors (for the end of the entry way that leads into the living room, instead of dividing the dining room, but this would give the kittens and queens access to the front door when people go in and out)

• Those DIY metal grid panels people use to build storage furniture (ratty looking, and kind of expensive, but is my last resort as it seems to be the cheapest option I think)
• Ordering a proper glass window wall (this would have to be properly installed into the house, which would cost too much)
• Normal room dividers (too flimsy, too short, no door option)
• Chain link fence segments (definitely ratty looking)
• Decorative metal/PVC room divider modular panels that hang from the ceiling (I can't seem to find a version that has ample visibility without giant holes the kittens could slip through)
• Just building a bigger cage (more expensive than just building a wall out of the panels, and again, it's ratty looking)
• Using clear acrylic modular panels with holes in the corners, chained/tied together to hang from the ceiling (it's an option, but I'm not sure if it's the best in terms of aesthetics & cost, and idk how to attach a door that way)
• 3D printed prefab wall panels (not see through, and idk if/how I'd fit a door on it)
• Prefab floor to ceiling windows (expensive, heavy, needs proper installation I think)
• A clear, plastic tent piece, large enough for a patio (that would also look bad, since it's shiny and most likely will get scratched up)

I may be forgetting some options that I considered already, but I'm a complete novice at construction and home improvement, so I figured you guys probably know something I don't. I need a true barrier, that is preferably as clear as possible.

Even if you think your idea isn't all that good, suggest it anyway because I might be able to springboard off of it. This includes ideas relating to stuff I've thought of already.

Next week, I will be closing on my first ever home (hello Michigan tilderinos!). One of the projects I want to tackle and work on after I move in is setting up a smart home ecosystem that is sustainable long-term. I saw the open-source Home Assistant but I think I need to do more research on it and find compatible products. For now, my wishlist of projects are:

• Controllable lighting from my phone or computer
• Carbon Monoxide/Natural Gas detection
• Water leak and usage monitoring
• Thermostat

Are there any other use cases that you use home automation for? If you use Home Assistant (or used it in the past), what are some things I should consider? Any products that you bought in the past and regret now?

Hello... looking to hang a 100lbs heavy bag in my basement (with regular wood-stud walls). I've researched various options and have gone down all sorts of engineering rabbit holes, including pull-out strengths of various sized lag bolts, horizontal load maximums of different kinds of wood, etc. I've perused various marketplaces for various types of mounting solutions and such. The problem with standard DIY wall mounting is that it doesn't come off the wall far enough.

I'm wondering though -- and it seems simple enough of a solution -- why the following wouldn't work:

An 8-foot span of 2x6, turned "vertically" so that the top and bottom faces are the 2" edge, affixed 45 degrees to the studs. ASCII art not-withstanding, it's just an isosceles triangle, where the 8-foot hypotenuse is the lumber, and the "height" of the triangle is 4-feet. It would seem 2 brackets (the kind used in making decks) on each end, screwed into the studs would be suitably strong.

The "Sagulator" (google it!) seems to think that such a setup would only experience a total 0.01in sag in the center of the span.

The heavy bag would just hang from this with a strap that loops over the beam.

An 8-foot span basically means I have a lot of clearance on either side.

I suppose I could just go right into the ceiling joists, but with my proposed setup I can slide the bag to one end or the other and create a bit more of a dynamic setup (albeit it looks a bit more unsightly).

Thoughts or suggestions? Or am I crazy?

I have been researching DIY Latex / Hybrid mattresses lately and have been thinking about pulling the trigger. I've been eying a full latex build, 3 inches of Firm, Medium, and Soft talalay (firm -> soft).I was able to find a good amount of information between Reddit (https://www.reddit.com/r/Mattress/comments/otdqms/diy_mattresses_an_introductory_guide/?rdt=54627) and Arizona Premium Mattresses, but I feel like I'm lacking information about people's anecdotal experiences.

Have you gone the DIY route before? Was it a success? Did you end up effectively buying multiple mattresses worth of components trying to dial it in? Looking back would you just buy a bed in a box? Any insight / tips would be very much appreciated.

I'm looking into insulating the attic above a closed-in back porch & the estimate also included adding additional insulation on top of the blown-in in the attic.

What kinds of factors can be used to think about the value of additional insulation?

For reference, I'm in Florida & keep setpoint around 80 degrees F most of the time when home, and 86 when not home. Power bills in the summer are in the $150-$180 USD range.

It's currently R27 and the quote is to add R11 to bring it up to R38. Code here appears to put new construction at R38 as a minimum, but looking at some charts - it looks like I might have already hit diminishing returns?

This chart I found on "Energy Vanguard" seems to suggest that going from 27 to 38 isn't much of a difference.

Does anyone else have any insight on when those diminishing returns are hit, and if it can make any appreciable difference in power bills? The house itself is comfortable enough, without large swings in temperature.

Growing up we had a carpet washer we would use once a year or so, but we had a dog and 3 messy kids.

Now that I'm grown up, I'm wondering if people regularly wash their carpets. I know you can rent some powerful units from local stores or get a portable one yourself, but Im actually wondering how common this is for people to do somewhat regularly (vs doing it when necessary due to pet accidents)

Hi everyone... I am trying to build a gravity fed watering system for my ducks. I want to have a 5 gallon jug up top, and quarter inch tubing running down into the coop area. I have a float valve, and tubing, and brass compression fittings. Everything is a quarter inch, and everything is fitting together really nicely.

However, I have no idea what part I am supposed to get that connects the compression fitting to the upper jug. There has to be a part that goes inside the jug, has a washer of some kind, and pokes through the jug, so that the compression fitting can screw onto it. Otherwise there is nothing to hold that piece to the jug. Reference Image

I have never built anything like this and I am trying really hard. I've gone to three separate hardware stores to just kind of look at all the pieces, but it is so disorganized and all the tiny shelves just seem to contain random parts that don't match the label. There are acronyms I don't know and can't find any forums for this specific project. All the animal waterers that are online require a hose or electricity and I have neither of those, hence needing it to be gravity fed.

I am starting to get really really discouraged :( I don't even know what question I am supposed to be asking. I just want to connect the tubing into a 5 gallon jug without it leaking out, but right now I just have a compression fitting stuck into a hole in a jug and nothing keeping it in place and all the water leaks out the side. Apologies if this is the wrong section to post this.. Thank you in advance if you have any advice.

Basic Household Tool List

(Edited to add suggestions from the comments and the general philosophy of this list)

• Tool bag (at least 15 inches long)
• Hammer (12 or 16 oz)
• Rubber mallet (white head preferred, non-marking)
• 6 inch Needlenose Pliers
• 8 inch Slip Joint Pliers
• 8 inch Crescent/adjustable wrench
• 10 inch Slip groove (large jaw) pliers
• Box cutter (optionally folding) + set of replacement blades
• Hacksaw + spare blades
• Scissors
• 25' Tape Measure
• Set of precision (small) screwdrivers
• #1 and #2 Phillips head screwdrivers
• Small and large straight blade screwdrivers
• Multi screwdriver with torx/phillips/straight blade heads
• half-round file (h/t @patience_limited)
• a metal putty knife or a 5-in-1 combination paint scraper (h/t @patience_limited)
• roll of twine
• roll of blue masking tape
• roll of Gorilla tape
• roll of black electrical tape
• super glue
• small bottle of wood glue
• 2" paint brush
• torpedo level
• small flashlight
• a strong neodynium magnet - to use as a stud finder and for many other things (h/t @the_man)
• 9v batteries
• AA batteries
• AAA batteries
• 50 1" #6 wood screws (zinc/steel, not brass)
• 50 2" #8 wood screws (zinc/steel, not brass)
• small box of 1.5" finishing nails
• light and heavy duty drywall anchors
• course and fine foam sanding blocks (h/t @patience_limited)
• 5 gallon bucket
• safety glasses
• N95 masks
• leather work gloves
• foam ear plus (h/t @the_man)

Bonus list (things that are more expensive or nice-to-have upgrades):

• a stud finder - the cheap ones are worthless, buy a good one or not at all (h/t @DeaconBlue)
• a battery powered drill + bit set (h/t @patience_limited)
• a set of metric and imperial allen keys (h/t @sublime_aenima)
• a basic socket set with a mix of metric and imperial sockets (h/t @auk)

The philosophy of this list:

A good starter set should include tools and supplies someone will be glad they had that they didn't know they needed. Even if they aren't "handy", a handier friend might use them (and they learn something in the process). It doesn't include very specialized things like demolition, electrical, or plumbing tools. If you're going to undertake projects in those areas, you should know a little about what you're doing, and you'll be able to buy the right tools for the specific project. As as electrical engineer, I particularly don't include a multimeter because I don't want to encourage someone to mess around with electricity if they don't understand how it might hurt them.

This list specifically does not suggest brands (except where the brand is the thing, like Gorilla tape). Opinions on what brand is best vary widely, but my general suggestion is this. Don't break the bank buying high end tools for someone who may never use them. A $2 hammer is going to be fine for someone who uses it once a year. If they are using them often enough to want something better, they can buy something better (or you can buy it for them).

Hi, I have a weird cubic space in my garage wall due to the location of the chimney and stairs to the basement.
The lower edge of that cubic hole is at 41 inches (104 cm) from the floor. Its deep is 40 inches (101 cm). Width 39 inches (99 cm). Height 46 inches (117 cm).
Too deep for static shelves, I cannot reach the end. Too tall for sliding shelves (kind of drawer thing), I am 5'7'' (172 cm). In its current form, it is too much of a space for its practical use.
I thought that a carousel that moves shelves up and down (like in this design for shoes https://storagemotion.com/shoeselect/) but for heavier weights would be practical... I have no idea how to even name the parts to buy them, if they exist.
Also, I will appreciate suggestions for an alternative solution.
Thanks.
PS: located in Massachusetts, US.

One of the things I want to do when I purchase a home is not subscribe to the whole lawn culture, not just because I hate lawn care, but because I think they're ugly and boring. I want something a little more eco-friendly and more comfortable to be in. I'm thinking fast growing trees, bushes, tall plants, etc.

Has anyone on Tildes attempted such a conversion? What are some tips you'd recommend?

Anyone have any ideas for a cool project involving an old school satellite dish? It's maybe 6-8 feet in diameter. I've seen some stuff like make an art project or an umbrella but I was hoping to use it for picking up signals again. I don't imagine I can use it to get TV but is there any satellites from universities or maybe hobby cube sats that I might be able to use?

Apologies if this is in the wrong topic it was this or ~space.

It took me a while to find a good, non-destructive way to put up posters in my living room. I think I started with blu-tack, which dried in a few months and the posters came down. Then I tried 3M's hanging strips, which stayed on the wall for longer, but was pretty expensive for what it was. A year ago I had the idea of using velcro that has adhesive tape on the other side. So far this has worked near perfectly for me.

I know I'm not breaking new ground here, but I was happy to finally find a decent solution. Well, at least for light objects on walls (and elsewhere).

I am putting a new surface on my Deck. I am using Trex and 2.5" composite specific screws. These are small head screws with a T20 torx bit.

[img]https://i.ibb.co/MchtXPx/20230628-175119.jpg[/img]

I am 7.5 boards in out of 25 boards and I have destroyed 5 bits, 3 of them brand name impact rated bits. I am making sure to stay cammed in, and weight on top of the screw. I am lining the drill up with the angle of the screw. I am also predrilling every hole.

I feel like I have to be doing something wrong. I just don't know what else to do.

Edit - these are the exact screws I am using - https://www.homedepot.com/p/Grip-Rite-9-x-2-1-2-in-Brown-Star-Drive-Pan-Head-Coarse-Composite-Deck-Screw-10-lbs-Pack-N212CSB10BK/207193648

I've got a basic garage in the backyard - essentially a sheet metal shed with a concrete floor. It would have been built in the 1980s so I doubt the concrete slab had a water barrier - or if it did it probably wore away over time.

When we have wet weather, the concrete gets damp underneath items on the floor - like rubber mats etc. There's also some mineral staining. Doing some reading online, it looks like concrete efflorescence.

I'm considering demolishing the shed and building a better workshop (insulated etc.) on the existing concrete slab. Can I make the existing slab a usable floor by sealing it with something like epoxy? Or would I be better off using the slab as a footing and building the new structure on posts with a separate floor suspended above the slab?

My goal is to avoid getting any damp or mould in the new structure.

I’ve always been a bit nervous of bleach. My white counters in the kitchen have been picking up stains, so I bought some bleach and have left it to sit. Hooray, the stains are gone!

BUT. Then I googled some bleach tips and discovered that you absolutely shouldn’t use undiluted bleach on your counters because it can ruin them 🤦🏻‍♀️

I didn’t pick up a lot of cleaning knowledge from my parents, and it’s been a lot of trial and error (so much error) figuring out how to keep everything clean enough. Now I have schedules and products and I do a pretty good job of it, but I moved out of home at 18 and I’m now 36 so it’s been literally half my life getting to this point.

So… what cleaning tips and tricks do you have? What product (remember to specify which country you’re in!) can you absolutely not do without? What products can be used for something unusual? Let’s hear it!

I'm thinking first order of business is cleaning and then I'd like to paint, and then cleaning up the unkept yard. But I still haven't even moved yet and I know reality will be different.

Does anyone who's been in this situation before have some general advice?

My girlfriend and I have been in the market for new computer chairs at home, as we have been getting increasingly uncomfortable in our existing chairs. We are both shorter people (both under 5’5”) and the problem we’ve been coming across is in most chairs (even the ones I’ve found for “short” people) tend to have seat depths of 16+ inches. What ends up happening is the edge of the seat ends up pushing into our calves leading to bad posture because we can’t sit up fully to the back of the chair unless our lower back gets leaned forward a bit due to the size of the seat depth. This leads to bad posture and back pain.

So I’m curious fellow short people of Tildes, does anyone have any recommendations for a more comfortable and ergonomic chair for short people?

I’m going to be replacing my mattress soon, and there are a lot more options available now, including many that I can order online instead of having to go get from a furniture store. Every time I’ve tried ones out in the store it’s always been a crapshoot as to whether or not I actually like it once I get it home, as I can’t really get a good feel for it there. As such I’m more than willing to go with the convenience of an online brand, but would rather hear from some people besides sponsored YouTubers first.

What brand of mattress do you sleep on and like? Any brands you had bad experiences with and would avoid?

I’m building a new home and we have hard water around here. I want to save our brand new plumbing and fixtures from being loaded up with deposits from day one. I’ve never used a water softener before. What’s the best route to go?

It's six months and I haven't spent it yet.

What do I need that I don't realize I need?

I already have multiple monitors, keyboards, etc. Separate headphones (that I don't use because I don't need to shut the door often), microphone (doesn't make a difference), and other obvious tech toys. I bought a new UPS right before I started the job.

It's a nice problem to have: "I don't need anything." But surely I should spend money on SOMEthing?

I recently moved to a place with harder water than I'm used to (more minerals). It tastes bad, it makes my detergents less effective, it forms soap scum everywhere, and it's definitely not good for my appliances. Does anyone have advice on how to deal with this in a cost-effective way?

I unfortunately can't install a point-of-entry water softener here. I can theoretically install point-of-use softeners for each of my appliances (bathroom sink, kitchen sink, dishwasher, washing machine, maybe shower), but the portable ones cost like $300+. I can't decide if it's worth the purchase. I also don't know enough about the different kinds or whether they're available in portable formats (reverse osmosis filtration, potassium chloride water softening, and sodium water softening; maybe others). Does anyone have recommendations?

I recently bought a showerhead with a better filter, which will probably help reduce skin irritation, but it can't actually remove calcium or magnesium. I can't visualize what a genuine point-of-use softener for a shower would even look like or how I would attach it to my showerhead, and I don't know where to get one that isn't just marketing fluff.

I have some CLR that I intend to use with my dishwasher, but I don't want to have to buy this stuff constantly (just another cleaning product in my cabinet). And I have a Brita for drinking water, but was thinking of getting an under-sink filter as I don't like waiting for it to refill; I have no idea how much to spend on this or which brands are best.

Happy to hear everyone's thoughts on household water management!

Hi all, I'm becoming almost certain that my apartment is dealing with a minor bedbug infestation. Do any of you have experience dealing with the things? Specifically, my unit shares a building with about 20 others, so has anybody dealt with infestations in a similar situation? I'm wondering if a heat treatment is even possible or realistic.

I got a cheap mop at the grocery store last year thinking that would be enough, but it broke like a month ago and always left smudges all over my floors anyway. I never really liked it. It was one of those fixed sponges with a handle to squeeze it out rather than one that looks like Medusa.

I have wood laminate floors throughout my house, not true wood floors. Unfortunately, they're dark brown and show a ton of crumbs and smudges, so I'm looking for something sorta in the buy-it-for-life category. I.e. willing to shell out a little more if it makes a difference. I've had a vacuum for a year that has been good for all the crumbs (Miele), and I really love it.

Also what soap should I be using for best results?

Thanks, all!