Hey all!

So I was thinking of how when looking at privacy, having a platform being a walled garden (i.e. data not being found on search engines) can feel like a worse experience for what is regarded as the open internet.

I don't have a solid solution for this. So my question to you is,

How do you respect privacy while sharing content for search engines on a platform?

So bit more than one month ago my very old Microsoft Sidewinder X4 keyboard broke the membrane on the 'A' key, meaning it was effectively kaput. I decided that I wanted to try a mechanical.

The Search

My use-cases are as follows, in the order of importance:

1. Gaming
2. Programming
3. General typing

These were the first requirements I settled on, based on my limited knowledge of mechanical keyboards:

• ISO nordic layout
• Full size: Because I make heavy use of both numpad and the insert-delete-home-end-page island of keys. Whatever it is called. I have zero interest in compromising on the standard layout.
• Nice to have: Metal body
• Nice to have: General high-quality
• Nice to have: Wireless, but only if 2.4Gz.
• Nice to have: Tactile switches
• Nice to have: Backlit keys
• Nice to have: Simple elegant aesthetic. I especially want to avoid typical gamer aesthetic.
• Budget basically unlimited

With these requirements I eventually settled on Keychron Q6 Max with Jupiter Brown. But just before ordering one, I started thinking about the height of the keys on a normal old-school mechanical.
I don't remember when I have last used one, all my recent keyboard had been modern low-profile so I didn't have a reference for what I was buying other than images.
I started reading about wrist problems from keyboard height and the recommendation of a wrist rest. I looked at the Keychron options and saw that they only had rests that were completely detached from the keyboard.
Thing is that I move my keyboard around my desk a lot, so I figured that having a wrist-rest that was not attached would become an annoyance.
After this I decided to just stick to what I am used to and added another requirement:

• Low-profile

Unfortunately when you set requirements for 100%, ISO, and low-profile, then the otherwise extensive Keychron catalogue becomes super limited. So I started looking elsewhere.
At the time there was a new post about a search engine on the /r/MechanicalKeyboards front page.
Using this I discovered the Cherry MX 10.0N. This seemed like a good deal. High quality all-metal body.
The only real sticking point was that the switches are linear with very short actuation, but I liked the look of this keyboard so much that I decided I could probably learn to live with it.

The review

The keyboard looks great in person. The all-metal body feels very solid and high-quality. It's got good heft and sticks to the table. The entire board is very thin and feels good to rest on.
The keys also feel high quality with minimal wobbling, and long keys sound and feel the same whether pressed on the edge or in the middle.

That's all the good stuff. Now on to the less good.

The foot

The adjustable foot in the back has no real positions. Meaning that there is no point in adjusting it where it will click in place and stay there, and it is under constant spring pressure to return to the stowed position. This means that the only thing keeping the extended foot in place is the weight of the keyboard. As mentioned I move my keyboard around frequently, and this means that everytime I move it I have to readjust the foot.
Additionally, it's highest position is sort of a balancing point, meaning that it you are a bit off, or accidentally push the keyboard a bit in this position, then the foot will suddenly collapse.
It's a minor annoyance, but one that is unique to this keyboard since I don't see this kind of foot design anywhere else. Otherwise the full-length metal foot is really nice, if only they had added proper click positions in its travel.

The switches

As mentioned, these are linear with very short actuation. CHERRY MX LOW PROFILE RGB SPEED switches to be specific. My first thought when trying to type with these was "Oh my god I hate this, how can some prefer this?!".
Constant mistyping was the name of the game. I was so used to being able to slightly miss a key, but still only actuate the intended. But that doesn't fly with this keyboard. If you depress any key even the slightest, it WILL actuate.
For gaming I first didn't understand why I sometimes kept jumping. I eventually figured out its because the mere weight of my thumb resting on the spacebar can be enough to actuate it sometimes.

After 1 month of regular usage, I can confidently say that my thoughts are now "Oh my god I hate this, how can some prefer this?!". Okay, I improved my typing somewhat to maybe half my mistyping. Gaming is still a pain, and I've had to regularly rest my thumb on the table instead to stop the sudden jumping.
Unfortunately this keyboard does not have hot-swappable switches, so there is no fixing it unless I want to buy a soldering iron and replace every single key, which I am not willing to.

Key spacing

So while the keyboard is technically 100%, Cherry has still designed it to be as compact as possible. One area where they have shaved off the length is the spacing between the main keys and the arrows keys and those above. Aswell as on the other side with the numpad.
I didn't know this prior to puchasing this keyboard, but apparently this spacing is essential for my muscle memory to be able to find those keys. The lack of spacing has meant that maybe 25% of the time I use them, I press the wrong key.

Overall

Now the issue with the switches and spacing is really an issue of preference. These aren’t quality issues. They were designed this way because some people like it (somehow). So if this keyboard looks interesting to you, and these preference design choices don't bother you, then I can only recommend the Cherry MX 10.0N. It really is a very high quality keyboard.

For me though, I just can't overlook these choices, so I have started looking for another keyboard again. I'm currently split between the Cherry KW X ULP and Logitech G915 X Lightspeed. None of them are full-metal body unfortunately. The cherry one seems to be the higher quality, but the the key caps remind me of laptops keys, which I really hate the feel of. Maybe I'm overreacting to it. The Logitech one is lower quality, but has all the the features that I would want. If you know of something better then please do leave a comment. I might reconsider my low-profile requirement. I'll give it at least another month before I become serious about switching again.

I've been self-hosting for a few years. However, now I have a single server hosting all of my things whereas, before, I had multiple old machines physically isolating services. I'm getting ready to host a game server or few (at least one for Tilde) on this machine.

While I'm not a neophyte to Linux, I'm not a guru and definitely not an infosec expert.

Given that, what steps do you take to secure a Linux server, LXCs, and docker containers that are receiving port-forwarded internet traffic?

FWIW, I expect I'll have an LXC running docker containers. I can instead run a VM doing same.

Advice welcome!

CES 2025 kicked off with some big hardware announcements.

• AMD CPUS for desktop, mobile, and handhelds
• Nvidia 5000 GPUs (see separate discussion here)

But what else are people excited (or not excited) for that doesn't necessarily deserve its own thread?

I imagine most people don't save or just keep images together with the photos they've taken on their phones. But it would be nice to have a simple place to store and organize those images.

I've seen these recommendations: https://tildes.net/~tech/1l48/pinterest_alternatives , but I don't know if that's the best format. Maybe I'm just overthinking it. For now I only have a folder on iCloud with sub-folders. Quick and simple, syncs across devices, but not super organized.

I saw a similar thread recently and since I also happen to be looking for a gpu, I thought I'd ask here as well.

Soo, I suppose I should start by saying that I really do not know much about hardware. All the computers I had were purchased pre-built and I didn't really open them up apart from occasional cleaning or plugging in a new drive. Either way, my current hardware is as follows:

• CPU: Intel i7-8700
• RAM: 16GB DDR4
• GPU: integrated Intel CoffeeLake-S GT2
• Displays: 2560x1080@60hz and 1920x1080 up to 165hz but usually sitting at 60
• Motherboard: 0NC2VH (from Dell OptiPlex 7060 SFF)
• PSU: 200W

So the 2 things worrying me here are:

1. The PSU power output is probably too low
2. The entire case is kind of on the smaller side, I'm not sure what gpu would be able to fit there (though that's a thing I asked about when buying this pc, and apparently small form factor gpus should be fine?)

As I said earlier I'm really clueless about this kind of things and I'm not sure where to start, so I don't even have any candidates. Generally, I don't do too much gpu-intensive stuff (which is why for a long time I've been fine with an iGPU) and most of the games (2d stuff like various roguelikes or Factorio) I play run fine, but recently I've been playing some more games like Fall Guys or Supermarket Together with friends and it's been a bit frustrating to lower the graphics settings to the very lowest they can be and also decrease the resolution to have them run at a playable framerate (though even Factorio has been having some frame drops recently as my factory keeps growing, but I'm not sure if it's actually the igpu causing the bottleneck).

Any advice would be appreciated! I can provide more information if there's something relevant I haven't mentioned (which I imagine is quite possible)

Edit: I am now instead considering a full upgrade, since it might make more sense as people pointed out

Edit2: a pretty important thing I forgot to mention is that I primarily run linux, so driver compatibility is a big thing for me.

Hi all. I need to set up an outdoor CCTV camera and since there seem to be a hundred different brands and as many pitfalls I'm wondering if anyone here can help me navigate that minefield. I have zero experience.

I have the following basic requirements:

• Waterproof: It's outdoors, it will be rained on, plus there will often be high humidity, pollen and dust. It should not get fogged up. (IP66 or higher I think?) This also means there shouldn't be exposed plugs, otherwise it's not really waterproof.
• NOT battery powered. If there's a battery power option, battery degradation shouldn't prevent the camera from working, since otherwise that will massively impact longevity. I'm looking for something that can be wired directly to AC power.
• Wifi support: Comms cannot be wired in this installation. Norm will probably be n (2.4ghz) but ac+ should ideally be supported for future proofing.
• I probably can't buy it if it's not available in Europe (this often excludes some american startups).

With regard to what happens to the footage:

• I think IP streaming would be ideal?
• Abso-fucking-lutely no "cloud" based services. I have no interest in having to bounce footage through the US or china, or paying a monthly fee for unnecessary nonsense. I'm afraid of brands not being clear about this being a requirement before I spend my money.
• Some brands seem to have their own "server"/hub hardware? Why? No! I already own computers, so I don't need to waste money on a proprietary unitasker for talking to my camera.
• I think there are some open standards for camera streaming and open source software for handling the cameras. Support for these would be great. I'm accepting software recommendations too.
• I'm not in theory opposed to SD card support, but I'd rather not have to use local storage at all, and don't mind if it's not an option. If a setup requires storing in an SD card and then reading from it that's not the worst, I suppose (it's not that expensive to replace dead SD cards once every few years).

Optional bells and whistles:

• There is some illumination in the location at night, but some form of night vision would be highly desirable. Optional built in lights are probably also a good idea.
• Microphone is a nice plus.
• Motion detection and human tracking are a nice plus. The camera doesn't have to rotate 360 degrees; probably a ~60 degree angle of vision would be plenty. At the extreme, I'd say more than ~120 degrees is literally useless due to obstacles. (Obviously if an ideal solution has full rotation, I'll just take it.)
• Resolution+framerate (bitrate) can be as high as wireless-n can comfortably handle, but I don't really think I need more than 1080p.

Thanks in advance if anyone knows enough to be able to help.

GPU Purchased: RX 6650XT for $330+tax

Overview

I am currently looking at replacing my GPU, as I believe it is broken. I do not want to spend a high amount as money is a bit tight for me. However, I am open to spending a bit more than the cheapest option, if it will last me longer.

Current Hardware

• CPU: AMD Ryzen 5 5500
• RAM: 32GB DDR4
• PSU: 550W
• GPU: NVidia GTX 970
• Primary Display: 1080p60
• Secondary Display: 1600x900 60hz

Workload

I do not do need that strong of a GPU, since I primarily play games a bit older and I occasionally do video editing. For video editing, my video projects tend to be relatively lightweight, so I do not need a beefy GPU for it.

A couple game examples:

• Minecraft
• Far Cry 5
• Civ VI

Other factors

For budget, I am trying to stay as low as possible. However, I do want to buy new, as I am pretty sure my GPU is the problem, but do not know for sure so want to be able to return it. For OS, I am running Fedora KDE. I had my GTX 970 working with it, but I have heard AMD cards work better for Linux. Is switching to AMD better overall or just easier to setup?

Current GPU Considerations:

• $145 GTX 1030
• $260 RTX 3050
• $360 Radeon RX 7600
  All prices posted are in Canadian. I am open to others, these are just the first that came up as I was doing light research

Edit: After some suggestions, I am currently leaning towards the RX 6650XT for $330

The other day I was in Target and they had a keyboard display, and in that display was a SteelSeries Apex Pro TKL. For those unfamilliar with them, they feature what they call omnipoint keyswitches, which basically means that they are all essentially analogue inputs, which means you can adjust the actuation point in software.

I know there are a lot of keyboard enthusiasts here on Tildes, so I thought I'd ask what you thought about it. While I'm probably not going to buy one anytime soon, I'm interested in it. But I'd also use it almost exclusively for typing, which isn't really the target audience for it. I generally prefer tactile switches but I realized while demoing the Apex that I've been using rubber dome switches so much in recent years that it doesn't matter too much.

Seems to be a common subject online that pinterest sucks. I've found so many threads of people asking for alternatives...but I've yet to find a replacement, or really recommendations.

I've been trying out the site cosmos.so, Interesting concept but it is limited by the lack of android and Firefox plugin support

Any suggestions? What I am looking for is a tool that I can use to save stuff I find online, links, images, screenshots. Preferably open sourced or privacy friendly, but at this point I'll take anything lol.

I feel like there has to be something out there!! Not sure why I am having such a hard time finding it. Any recommendations would be appreciated

I was contacted by a recruiter regarding a job in my field but they wanted someone with data analytics skills. I'm taking this as a sign that I should improve my skill set. Does anyone have advice for where or how to start with a very small budget?

Thanks for your help.

Hi folks--I am very excited about a gaming PC that I just bought for my family (mainly 13yo son into gaming, coding, and digital art).

I installed the video card (only piece sent separately), went through Windows setup/updates. Installed peripherals. Updated video card drivers. Installed Steam/GIMP/Krita. Made 13yo an adult in my Steam Family. Installed a few of the games so something is ready to run right away. I even have the small Wacom tablet working in GIMP and Inkscape with a good pressure profile!

All that said, I used to set up my own Windows PCs (looooong) ago, and I'm wondering if it's really that simple. It was very easy.

I did small utility things like run Startallback and install PowerToys. I figured MS Visual Code is next?

Anything else you all can suggest?

(P.S. is there a way to move all his Minecraft stuff to his new Microsoft account? He's tired of logging in as me, and I'm tired of sending him auth codes.)

Hello, my friend recently lost their laptop (long story) and has kindly asked me to help them out to find a replacement.

I've had success asking here before, so I would be very grateful for any help or direction.

Here are the main criteria, based on what we've discussed.

• Can compile LaTeX.
• Can run Jupyter notebooks, Python, and the like.
• Can play non-AAA games like Binding of Isaac, Balatro, Dofus.
• Can play YouTube videos, and Twitch streams. (Not picky about screen quality.)
• Maximum 13" screen, can be smaller I think?
• As light as possible (a tablet + keyboard combo might be worth it).
• USB port for transferring files (to their institution's ancient printers)
• Ports to connect a mouse, gamepad, etc.
• Bluetooth, wifi, webcam
• Lasts at least four hours on battery (if not gaming)
• Under 1000 euros preferably (willing to make exceptions if you think it is worth it)

Here are the nice-to-haves:

• HDMI slot
• Long-lasting battery
• Nice mic and webcam
• Nice screen quality
• Repairable

Don't care about:

• Stylus
• SD card reader

My friend is mostly used to Windows but I think if I could make a strong case for Ubuntu then they might be open to it if that's relevant.

Thanks for reading!

—

Edit: Thanks everyone. We ultimately settled for an IdeaPad 2-in-1. Fingers crossed that they’re happy with that.

like anyone, I use a calendar app, (my choice of app is ProtonCalendar as I will install only open-source apps)

anyways, I will make a reminder even for myself, let's say 2:00 PM tomorrow, I want to pay a specific bill.

so 2 pm tomorrow comes around, and I am not at home, so what I will do when I get the notification is to not swipe it away but leave it in the notification section of my Google Pixel and I will only swipe it away once I have actually done it. and if I dont get to it that day, I will go to my computer and schedule that event for another day so I don't lose track of it.

problem is, more than 1, I have accidentally swiped away a notification without meaning to and sometimes I had like 3-4 different ones and I had to go through the history of what notifications I had swiped to make sure I didnt swipe away anything too urgent. but I'd much rather just not be able to swipe away a to-do I haven't completed yet until I could check a box indicating I had completed it.

I have considered getting a to-do notes app, but I really like seeing these sorts of reminders on a graphical calendar interface.

any suggestion for what I should do or do I just need to be really careful to not swipe away notification and there's no other option for me?

Hello friends, and thank you in advance for any help on this topic.

I am looking for an android keyboard that does not have emoji, stickers or gifs, but also has long press options for special characters like dashes, slashes and colons etc.

Searching online for variants of "no emoji keyboard," only floods my results with the opposite and it's beyond frustrating!

I realize that the answer is likely right under my nose and I'm just missing it for whatever reason.

I would glady pay money for such an option if only I could find one.

I'm sorry if this question is silly or posted in the wrong thread, but I'm at my wits end.

Again, thank you for any help or redirection to my query!

Cheers!