I got this error message this morning when making content ( replying to a thread ) first thing in my Tildes.net session

https://paste.pics/SN1N0

Oddly, I didn't have any trouble making a new thread ( this one ), just replying to existing threads.

It happened on only the second comment I tried to make this morning.

So bit more than one month ago my very old Microsoft Sidewinder X4 keyboard broke the membrane on the 'A' key, meaning it was effectively kaput. I decided that I wanted to try a mechanical.

The Search

My use-cases are as follows, in the order of importance:

1. Gaming
2. Programming
3. General typing

These were the first requirements I settled on, based on my limited knowledge of mechanical keyboards:

• ISO nordic layout
• Full size: Because I make heavy use of both numpad and the insert-delete-home-end-page island of keys. Whatever it is called. I have zero interest in compromising on the standard layout.
• Nice to have: Metal body
• Nice to have: General high-quality
• Nice to have: Wireless, but only if 2.4Gz.
• Nice to have: Tactile switches
• Nice to have: Backlit keys
• Nice to have: Simple elegant aesthetic. I especially want to avoid typical gamer aesthetic.
• Budget basically unlimited

With these requirements I eventually settled on Keychron Q6 Max with Jupiter Brown. But just before ordering one, I started thinking about the height of the keys on a normal old-school mechanical.
I don't remember when I have last used one, all my recent keyboard had been modern low-profile so I didn't have a reference for what I was buying other than images.
I started reading about wrist problems from keyboard height and the recommendation of a wrist rest. I looked at the Keychron options and saw that they only had rests that were completely detached from the keyboard.
Thing is that I move my keyboard around my desk a lot, so I figured that having a wrist-rest that was not attached would become an annoyance.
After this I decided to just stick to what I am used to and added another requirement:

• Low-profile

Unfortunately when you set requirements for 100%, ISO, and low-profile, then the otherwise extensive Keychron catalogue becomes super limited. So I started looking elsewhere.
At the time there was a new post about a search engine on the /r/MechanicalKeyboards front page.
Using this I discovered the Cherry MX 10.0N. This seemed like a good deal. High quality all-metal body.
The only real sticking point was that the switches are linear with very short actuation, but I liked the look of this keyboard so much that I decided I could probably learn to live with it.

The review

The keyboard looks great in person. The all-metal body feels very solid and high-quality. It's got good heft and sticks to the table. The entire board is very thin and feels good to rest on.
The keys also feel high quality with minimal wobbling, and long keys sound and feel the same whether pressed on the edge or in the middle.

That's all the good stuff. Now on to the less good.

The foot

The adjustable foot in the back has no real positions. Meaning that there is no point in adjusting it where it will click in place and stay there, and it is under constant spring pressure to return to the stowed position. This means that the only thing keeping the extended foot in place is the weight of the keyboard. As mentioned I move my keyboard around frequently, and this means that everytime I move it I have to readjust the foot.
Additionally, it's highest position is sort of a balancing point, meaning that it you are a bit off, or accidentally push the keyboard a bit in this position, then the foot will suddenly collapse.
It's a minor annoyance, but one that is unique to this keyboard since I don't see this kind of foot design anywhere else. Otherwise the full-length metal foot is really nice, if only they had added proper click positions in its travel.

The switches

As mentioned, these are linear with very short actuation. CHERRY MX LOW PROFILE RGB SPEED switches to be specific. My first thought when trying to type with these was "Oh my god I hate this, how can some prefer this?!".
Constant mistyping was the name of the game. I was so used to being able to slightly miss a key, but still only actuate the intended. But that doesn't fly with this keyboard. If you depress any key even the slightest, it WILL actuate.
For gaming I first didn't understand why I sometimes kept jumping. I eventually figured out its because the mere weight of my thumb resting on the spacebar can be enough to actuate it sometimes.

After 1 month of regular usage, I can confidently say that my thoughts are now "Oh my god I hate this, how can some prefer this?!". Okay, I improved my typing somewhat to maybe half my mistyping. Gaming is still a pain, and I've had to regularly rest my thumb on the table instead to stop the sudden jumping.
Unfortunately this keyboard does not have hot-swappable switches, so there is no fixing it unless I want to buy a soldering iron and replace every single key, which I am not willing to.

Key spacing

So while the keyboard is technically 100%, Cherry has still designed it to be as compact as possible. One area where they have shaved off the length is the spacing between the main keys and the arrows keys and those above. Aswell as on the other side with the numpad.
I didn't know this prior to puchasing this keyboard, but apparently this spacing is essential for my muscle memory to be able to find those keys. The lack of spacing has meant that maybe 25% of the time I use them, I press the wrong key.

Overall

Now the issue with the switches and spacing is really an issue of preference. These aren’t quality issues. They were designed this way because some people like it (somehow). So if this keyboard looks interesting to you, and these preference design choices don't bother you, then I can only recommend the Cherry MX 10.0N. It really is a very high quality keyboard.

For me though, I just can't overlook these choices, so I have started looking for another keyboard again. I'm currently split between the Cherry KW X ULP and Logitech G915 X Lightspeed. None of them are full-metal body unfortunately. The cherry one seems to be the higher quality, but the the key caps remind me of laptops keys, which I really hate the feel of. Maybe I'm overreacting to it. The Logitech one is lower quality, but has all the the features that I would want. If you know of something better then please do leave a comment. I might reconsider my low-profile requirement. I'll give it at least another month before I become serious about switching again.

This question is inspired by two things:

1. @carsonc’s comment in the hard sci-fi topic about Kim Stanley Robinson’s Red Mars starting off in 2026 (which is right around the corner).

2. I started reading Ministry for the Future (coincidentally also by Kim Stanley Robinson) for the Tildes Book Club, and the titular organization starts in, of all times, January 2025 (as in, right now! The book was a perfect pick for this month).

It got me thinking about how a lot of science and speculative fiction books from the past imagined a future ahead of themselves, and how the passage of time has brought us to or even past those imagined futures.

So I’m interested in specific date milestones from fiction that we have met or passed already. They do not have to specifically be from science/speculative fiction, though I imagine most will be.

I’m working on an “advice” blog post for tech people at companies that plan to abandon VMWare. The idea is to give the reader an idea of what to expect and to help them plan their migration. The article will be on a vendor site, but I’m writing it with editorial purity. The only promotional component is at the end, where we say, “We can help with that!” and link to a white paper or whatnot.

So, what should I include in this listicle? What advice is important to impart – and why is that important?

References and examples are welcome. Horror stories are good, too. I’m not planning to quote anybody by name so don’t be shy. (I don’t need to explain why they plan to drop VMWare. Nor will there be a discussion about possible replacements. This is a process story that happens before you choose a replacement product/vendor.)