Hey guys, anyone else into keyboards? Would love to hear about what you use or experiment with, I've only been into the hobby a few months so I am still pretty new. I'd love to hear your guys set up and what got you into it, how it's evolved.

Currently rocking a Keychron Q2 (65%) with Tecsee purple panda switches and Drop MT3 Cyber keycaps - Co piloting this is a KBDcrafts Addams numpad with their s2 engine switches.

I do also have a keychron Q8 (Alice) in transit - I plan to swap the switches to the KBD s2 engine switches as I am really liking them on the numpad. I ordered this model because my carpal tunnel issues are what awoke me to the mechanical keyboard world, the alice layout isn't perfect but better than standard for ergos it looks like.

Early on in the hobby I was convinced I'd be a tactile switch guy, but the s2 engine switches really changed my mind on liking linear, eager to try a full board with them.

This got rambly, but would love to hear from others into the hobby!

I was just in the thread about if stores should stop accepting cash, and to my horror there was many people advocating to getrid of small change

So are there any coin roll hunters here that would be mega bummed out if we got rid of small change?

Here in canada, there's still some neat coins you can find in circulation

with nickels you can still find old laureate crown portraits and even older king George the 6th, and if your super lucky to hit a collection dump, king George the 5th nickels

With dimes there was still many silver dimes you can find in circulation, I recently hit 4 rolls of silver dimes on a hunt, awesome collection dump, thats $370 worth of silver for $20, I rode that high for days

Quarters still have some old silver coins in circulation, but not as many as dimes

And Canada has something bad the americans dont have ARP, alloy recycling program, you see in canada all modern coins are made of steel on this inside, with plating of other metals,like nickel plated steel or bronze plated steel

So dimes and quarter pre 2000 are 100% nickel, and ARP takes them out of circulation

Nickels pre2000 are same alloy American nickels and pre 1982 are 100% nickel, ARP takes both these out of circulation

So in canada us coin roll hunters are scrambling to get the coins we want before ARP does

If there are no coin roll hunters to speak up on tildes, AMA about coin roll hunting

I'll start, Sony A7C, w/ Tamron 28-75mm f/2.8 as my main lens. Have a Sony 28-60mm f/4 as well, though its more for where I need a really compact setup.

Looking to get a Tamron 20-40mm f/2.8 for a little extra fov when indoors, while still having some reach. Planning on getting the A7CII when it comes out supposedly later this year according to sonyalpharumors.

I've got a K40 laser engraver that I've had a lot of fun getting up and running with K40 whisperer on a Raspberry pi, and lately I've been thinking about getting a cheap 3d printer. Does anyone have an entry level 3d printer they like and want to recommend? What kinds of projects do you like to make? Anybody have a desktop cnc or other fun toys? Let's hear about 'em.

I'm a knitter, cross stitcher, and general nerd. I can't actually create at the moment due to probable carpal tunnel, but I would love to see my fellow fiber artists of any and all genders speak up.

As for me, it's more about the process than the product! I love Grandmother's Favorite dishcloths as a mindless knitting stim, or cross stitching on a project until my hands hurt.

ETA: I'm not trying to ignore everyone. I'm really excited with the responses I'm getting. I'm just fighting some serious pain this morning. I'll try to reply to folks as soon as I can think!

ETA2: This got bigger than I had hoped! I don't think I can catch up and reply to everyone, but I do appreciate reading everyone's experiences! Thanks for humoring me today.

Hey there LEGO enthusiasts - wondering what you all do with kits after you build them? I really enjoy building LEGO (especially large complicated sets) but I don't want LEGO models taking over my house and getting dusty. What do you do?

I'm personally a little busy for 3d printing at the moment - but I love to see and be inspired by what others are doing. I know this is text based, but I'm also interested in what issues you are running into. I find it useful to see examples of what common problems and solutions others are running into.

I've got an "old" Prusa MK3S that is still going strong for me. When I get the time again I've got a few projects lined up: a brain, a mask, and a fluid desk sculpture that I'm excited to get printing.

What have you been printing lately?

Just curious. I've been trying to understand watercolors better. What I love about watercolors: so much expression, so much freedom. It also seems like a uniquely frustrating medium; understanding how much water is needed, how water reacts with certain papers, different types of brushes, etc. (I should mention it's the only painting I do, so maybe this stuff isn't unique to watercolor.)

Curious if there's any other watercolor enthusiasts here. Care to share your experiences, or tips for a novice?

I have 3 gal of blackberry wine aging on oak cubes in a carboy right now. Relatively new to the hobby but my best so far have been elderberry wine (full bodied and tannic, kind of like a Cabernet), and apple wine from store-bought juice (dry and crisp). This fall I'm planning on sourcing some locally grown Pinot Noir and trying my hand at making a "real" wine for the first time.

Hello Tildes geocachers! Found any good caches lately? Going in any good trips? Going to the Greater Bay Area Mega at the end of the month? I would love to know, and meet you online! I’d love to learn more about any interesting caches you’ve found lately and maybe we can discuss puzzles and challenges here.

First and foremost: I'm not certain whether this belongs in ~hobbies or ~comp. As I consider this a hobby, this seemed like the more appropriate spot, but I'm more than happy to move/repost in ~comp.

So for the past few years, I've really been hit by the computer nostalgia bug. It originally started as me just wanting to dive back into MUDs, and the whole retrocomputing fascination probably came from me wanting to recreate the "good ole' days" where I would pull up the Windows 98 terminal app and connect to my favorite MUD.

Now I've got a room in my house dedicated to this old, esoteric hobby that happens to take up a lot of space. Admittedly, I don't know a TON about hardware but I've been having a blast tinkering around on old machines. It's even more fun to see how I can push the limits of the computers given a few modern tweaks here and there.

Here's what I've currently got sitting up in the Upstairs Museum of Retrocomputing:

• A Compaq Prolinea 5/75 Pentium - this was given to me by a friend who had it sitting in the basement. To my surprise, everything was still in working order and it fired right up (Windows NT 4.0!) on the first try. Of course, I ripped out the old barrel clock battery and put in something safer. I'd say I tinker with this one the most on the software side, while still trying to keep the hardware as close to original as possible.
• A Compaq Prolinea 3/25s 386 - I just picked this bad boy up and am working on getting an OS installed. It had some damage from a leaky clock battery but I don't believe anything was irreversible. I'm not too confident in the whopping 4 MB of memory, but I'm planning on installing Windows 3.11 on this one.
• A Tandy TRS-80 CoCo 2 - It works, but I haven't spent a ton of time with it because I don't have an old TV or monitor with a coax connection. I'd love to figure out how to create my own cartridge with a homebrew version of Zork or Adventure.
• A Power Mac G5 - It's not ancient, but I think it's still worthy of being in the museum. I haven't had a chance to play around with it yet because I don't have the right video cable. I'll get around to it eventually.
• A Generic Pentium 4 - I actually found this one at a Goodwill store. This one fired right up and had a copy of Windows 2000 installed, including all of the old work files that the person left intact. This one has been the easiest to mod because it's somewhat closer to modern and uses a common form factor. So I've plugged in a new OS, new ethernet, etc. At some point the technology starts to blur and you start questioning why you aren't just using a modern computer.

What's next on my list? I'd like to start playing around with computers/OSes that I'm unfamiliar with. I grew up in a DOS/Mac OS 7-10/Windows world, so I'd love to get my hands on a NeXt, BeOS, etc. or even an Apple II.

But first I need to get the damn 386 running again.

Pun intended.

I'm just getting into bouldering / top roping and need to start my gear hunt. What do you recommend? What things do you stay away from? Right now I'm just climbing indoors with no real plans to go outdoors yet.

This is my first post so please let me know if I'm doing anything incorrectly! I'm not very clear on how tags work... Apologies.

I'm curious if there are many tattoo enthusiasts around. I love both talking about and looking at tattoos. I have found that more visual-focused places like Instagram or even Reddit don't really allow much conversation on the nuances of the industry, its artists, artistry, criticisms, and so on.

I am a heavily tattooed woman, which is both a blessing and a curse. A blessing because I'm happy in my own body. A curse because being fetishized makes me uncomfortable.

I both love and hate tattoos entering more into the mainstream. As that as happened, artistry has come leaps and bounds alongside it.

Anyone have any deep thoughts on tattoos and modern tattoo culture?

I love to skydive even though I'm relatively new. It's given me lots of motivation to lose weight and the community so far is great! As a trans woman in the US South who jumps in the South, I've found them to be incredibly accepting and welcoming, and there's nowhere I'd rather be than hanging out at the drop zone on a pretty day!

Anyone else like to skydive?

Anyone metal detect or coin roll hunt? Or magnet fish?

I do both, ive coin roll hunted for a year, and I just started metal detecting a month ago

I'm in canada, which has pros and cons for metal detecting, a con would be all our modern coins are made of plated steel, so they both sound bad when you swing over them, and the rot beyond use in not that long time

A pro though is we have 1 and 2 dollar coins, in the states you might go a year before swinging over a Sacajawea dollar, but in canada you might find multiple loonies on the first time out

In a bit over a month, of metal detecting I found 2 sterling rings, a silver dime(it was a fresh drop not ancient) and a sterling earring, the earring was gold plated, I was hoping I found gold till I saw the 925 and makers mark, looked on the makers website and it was all gold plated sterling

Coin roll hunting I recently hit the jackpot of the year most definitly, four whole rolls of silver dimes, thats $380 and only cost me $20 to aquire

Collections can be made of anything. Some items have no purpose other than being part of the collection itself, something to look at and feel warm inside, while others are more functional or enjoyable by themselves.

Some collectors are moved by a desire for completion, some by nostalgia, or historical preservation. There are also those who accumulate objects which they believe will grow in value.

People collect books, movies, posters, magazines, rocks, cars, tools, swords, sand, tshirts, game cartridges, music CDs, videogame consoles, dolls, action figures, computers, letters, stamps, coins, digital files of all kinds, and knives. Anything that you cherish having in great numbers can be a collection.

So what do you collect, and why?

As I spent some time recently clearing out my closet, I looked longingly at my keyboard that I purchased with the intent of learning and practicing while working from home, as well to my ant farm kit where I had unsuccessfully kept a queen and small colony for a few months until they died several years ago. I'm sure we all have these tokens of failed experiments or forays into hobbies that once seemed interesting but we ended up losing interest in.

What are yours? Why were you initially interested in it and why did you stop?

I recently went back from Pebbles to a green Casio F91W with a green NATO strap. I did a quick mod tonight to disable the beeping... which lead to everybody in multiple channels chatting about 'dumb' watches and even old calculator / data watches.

I love watches -- from reps to cheap Casios to fancier ones. Indulge me with a little show and tell :)

I went to college in Massachusetts, and after awhile the winters began to get to me. A study-abroad trip to Paraguay helped me fall in love with palms. After I graduated, I explicitly looked for work in areas of the Southeast where I could grow palms, eventually settling in the Midlands of South Carolina (USDA Hardiness Zone 8a), which can grow a reasonable variety (our state tree is the cabbage palmetto, Sabal palmetto, and it is incredibly common in the area). I’ve currently got two potted palms: a European fan palm, Chamaerops humilis, and pygmy date palm, Phoenix roebelenii (the latter needs to be housed in the garage during the winter).

The following are ramblings from my garden. I would love to here the ramblings from other people's gardens.

It's spring where I am, and I absolutely love spring! The last full moon (the one in February) I call the Angry Goose Moon, because it's around that time that my male goose turns into a monster, and I need to pull out my shield (a garbage bin lid) to move around the yard while warding off his attacks. His change in demeanor signifies the onset of spring for me.

Some people divide spring into early spring and late spring, but I live in a cool, wet environment that has a very long spring which is why I prefer thinking about the garden in terms of the moon cycle. The beginning of spring is Angry Goose Moon. During this phase, the hummingbirds start visiting, waiting for our native red flowering currant (Ribes sanguineum) to bloom. Everyday it gets closer and closer (I expect it to be in full bloom any day now). My hated Burkwood Osmanthus (Osmanthus × burkwoodii) begins rapidly trying to turn into a tree, and I'm reminded that I still haven't figured out what to plant in its place as I trim it back down a manageable level. And OMG the freaking cranesbill geranium (Geranium sanguineum) has once again gotten into everything, but I loathe to get rid of it all because the bees love it so much. This year I am being way more ruthless than years pass and have filled several bins of it for the yard waste collectors.

Usually this is also when I start seeds, but I'll be leaving for six weeks, so the seed catalogues will be collecting dust this year. Instead I'm checking out my propagation efforts from last year. I need to move a beautiful hydrangea (Hydrangea macrophylla) that gets way to big for the area it's in, but I've been afraid to move it case it dies, so last year I took 30 cuttings, which all rooted. It looks like 29 of those made it through the winter. I have no need for 29 more hydrangeas, but I now know I can move the mother plant, and if it dies, I'll have something to replace it with. In the mean time I'll plant the new ones in bigger pots to give away next year when they are more established.

Last fall I divided up some of the lemongrass (Cymbopogon citratus) I planted last year, plopped them into 10 pots, and brought them indoors to winter over. It looks like five of them made it. It won't be late enough for me to get them in the ground before I leave, but I will put them into bigger pots and get them under artificial light. Hopefully they will still be alive when I get back.

I'm not much of a rose fan, but outside my back window is a shrub rose (Rosa glauca) that has beautiful red tinged foliage and purple stems. It only flowers for a short time, and the flowers aren't anything to write home about, but they are followed by nice plump rose hips that I harvest for tea. It is absolutely in the wrong spot with its large growth and overly thorny stems. Last year I took a lot of cuttings of it and some natives roses that inhabit the same area, and it looks like most of them made it. Once they are large enough (another year or two) I'll plant them in a spot where their flesh ripping thorns won't be bothersome, remove all the large specimens, and replant the area with berries (I'm thinking about a mix of blueberry and honeyberry (Lonicera caerulea). Another potting up project before I go.

I enjoy plant medicine and started quite a few medicinal plants from seed last year. I started a bit late so nothing got in the ground, but it looks like most of them were able to winter over in the potting shed, but not all of them. I sowed 30 seeds of skullcap (Scutellaria baicalensis) of which only 6 germinated. I was going to move those six into the house to winter over, but I ended up with a spider mite problem in the house from having earlier brought in my toothache plants (Acmella oleraceae) and didn't want them to get infected. Unfortunately none of the skullcap survived. The toothache plants in the house didn't survive either, and I wish I had extracted their medicinal properties before their death, they were certainly large enough. But this paragraph started like it was going to be about wins. The biggest win, the one I'm most excited about, is that all of my mountain meadow arnica (Arnica chamissonis) made it! Their first leaves of spring are pushing through the soil, and their roots are pushing out of the holes of their pots. I don't believe there is a better plant for muscular aches and pains than arnica, and I am looking forward to harvesting it to make salves. I did seed way too many than my garden can hold, so as soon as I determine whether or not they they also are infested with spider mites, I will offer them up for other people to add to their gardens. I'm also excited that all the elecampane (Inula helenium) made it through the winter, though once again I seeded way too many. The added bonus is this plant can tend to be weedy in my locale, so I will only plant a couple down in the weedy medicinal area to let them compete with each other.

Side talk about garden pests. Besides slugs, which if I allow the ducks to move through the garden, don't damage too much of my garden, my gardens are fairly pest resistant. I spent a lot of time last year moving through it with a magnifier taking pictures and videos of the smaller insects that live among the plants. It's a whole other world living just out of reach of my normal vision! Of particular interest to me were a few of my phlox plants (Phlox paniculata) that had deformed leaves. On closer inspection I saw what I assume is spider mites. A few weeks later, taking video again, I saw what I assume are predatory spider mites, and a few weeks after that the phlox started growing correctly. There are so many predators out there doing "gods" work, and if any of you gardeners are ever bored, I suggest rabbit holing into garden predators.

I'm rambling, where was I?
Oh yeah.
I also use this time to severely prune stuff back that missed my list the year prior. In my culinary herb garden there is a bay tree (whether it's Laurus nobilis or Umbellularia californica I do not know). It's a monster that should not be planted where it is. I know I could hack it it back almost to the ground and it would come back, except that its branches cover my bathroom window in a way that gives me privacy from the cabin on the other side of the creek, while letting light in. It's this constant battle between keeping it small enough that wildlife can't use to get to the roof, yet large enough to afford me bathroom privacy. I just hacked a bunch of it off and I suspect I'll be doing the same again in the fall.

This place has a lot of problems, and I have to remain vigilant in celebrating the successes and not getting lost in lists of things to do. But there's a lot of beauty in our property, and I do enjoy experiencing it. Angry Goose Moon is the time of year when I am filled with the most hope for the future.

Is anyone else finding time for crafting these days? I'd love to see/hear about what you're working on!

I have spent the last month very slowly drafting a pattern for a skirt. After much time spent feeling apprehensive about cutting fabric (it's only an old bed sheet, but still) to test my first effort, last week I finally put scissors to cloth and sewed it together. I made several mistakes, but was so happy to have finally gotten that far, I didn't even feel bad about them.

I have a new basic block pattern drafted, and have even added a kick pleat so I can practice making that part. The new pattern has been cut and is ready to sew. 🤞 Here's hoping I did a better job this time!

I recently fixed my old wristwatch when I realized the need to know time is one of the causes for my smartphone addiction. It is nice to know the time from a device without WhatsApp, a web browser, or notifications.

Here it is, nothing fancy but extremely durable, about 15 years old: https://imgur.com/gallery/daDVelR

I’m looking into getting a Casio digital wristwatch with a simple alarm function and a light to see it in the dark. Again, nothing fancy. Just a piece of reliable, single purpose hardware. I love things like that.

They also look really nice.

Do you have and enjoy “dumb watches”? Why? Let’s talk about that :)

I do, and my personal go-to is the SOG Key Knife. Small, fits perfectly on my keychain, usable for most daily tasks, and not made in China, despite being inexpensive. I also tend to keep an old folding Buck my dad gave me in my bag for heavier duties.

Edit: added a photo of the SOG.

Second edit: Don’t get a knife for self-defense, they require significant training to properly use without getting hurt, and put you closer to your assailant. Learn situational awareness first and foremost, then if you still would like, pick up some pepper spray or a firearm.

I spent a lot of my youth training my dog for obedience and agility. I sorta-kinda got back into it about eight years ago when I got my first dog while living on my own. My trainer at the time stopped offering classes a few years ago. This was shortly after my dog and I competed in our first USDAA trial (which was a disaster, but that's to be expected).

I finally got around to ordering some new equipment (four jumps, a tunnel, and a set of weave poles), and I was reminded of how much fun it is! My dog (Loki, a 7 y/o Australian Shepherd) picked up right where we left off when I set up a super small course in the back yard at lunch today.

Does anybody else on Tildes compete or do any dog sports for fun? I'd love to hear what you're doing or any other stories about dog training people have. :)

I live in Colorado and I love cycling along twisty mountain roads. The experience of being on a bike rather than in a car is a completely different way of experiencing the state.

I'm always going like 40 mph slower than the cars that pass me though, and I can only go so far before I'm completely exhausted, so I'm considering getting a motorcycle (It seems like I'd actually be safer, since at least I'm going the same speed as the people trying to kill me now). I'm signed up for an MSF class next week to get my endorsement.

I'd love to hear people's opinions on first motorcycles if anyone has them. I don't think the type of motorcycles people normally recommend (Suzuki TU250X etc) will work for me because of the large amount of steep road riding I'm planning to do, so I think I need something with a bit more torque. Something like the Triumph Street Scrambler seems like a good idea!

I'm also looking for advice about whether it's completely insane to store such a bike outside. I don't have a garage, but I do have a driveway behind my house in an alley where mostly only the residents of the block ever go. I can also block my bike in with my car when I'm not using it. Is this situation plus a disc brake and a cover enough to keep my motorcycle safe-ish from theft?

So if there are any sailors or prespective sailors on here some questions. What region do you sail in? Captain or crew (I guess also own or crew)? What kind of boat? What level do you sail at?

This is a lot of questions I know, but I've gotten into sailing more and more over the last few years and I've found it's one of the main things that's kept me sane throughout the pandemic.

I’ve been wanting to get in to hobby electronics now that I have some free time, but I’m not sure what I want to start with. I am super interested in building an 8-bit computer but I’m curious what other types of things people have built or are building. Feel free to talk about any Raspberry Pi or Arduino projects as well even if they’re not strictly ‘hobby electronics’.

Sorry if this is frowned upon in these parts - but I was wondering if anyone would be interested in an exchange thing of the mugs Starbucks do? Due to coronavirus most of the fun traveling I do is cancelled for the foreseeable future. I figure it might be fun to find a few folks who'd be willing to do a trade for a new mug from somewhere else.

For what it's worth, I'm based in the northeast of the US, so I can likely trade a Boston, Massachusetts, New Hampshire, or Maine mug.

I love planted aquariums and lifting weights but because of the corona and personal problems I haven't done any of that in this year.

Lately, I am fixing old camera lenses and reselling them on eBay I almost don't make any money but it is a lot of fun.

And you guys? What are you doing besides eating, working and sleeping?

So, I'm currently working up 2 1 gallon apfelweing batches. For a while I was doing many 6 gallon batches, but took a break for a while, and getting back into it.

Any other homebrewers out there? Anything fermented, even kombucha :)

Hi, I wonder if there are people here likes to collect watches. If so, please share about the watch that you're wearing right now, or maybe your watch collection.

As for me, I own a few of Seiko mechanical watches (SNK809, SKX013, and the SARB017), and a couple of Casio digital watches (Casio Royale and W217H)

Lately I'm starting to appreciate quartz watches even more and I'm starting to look at vintage Seiko and Citizen quartz watches.

I'm about to do my full motorbike licence here in the UK (direct access course) and currently looking at my first big bike, thinking about a 600cc Triumph at the moment. Wondered if there are any other riders here on tildes, what do you ride, what's your history with bikes etc.?

I've been trying to get back into photography and love seeing what other photographers are using.

My daily driver is a Nikon D5600 with the kit 18-55mm lens, as well as a 70-300mm lens. Nothing to spectacular, but it gets the job done. I'm just a hobbyist, so I don't have any real professional-grade equipment, but hopefully with time I'll get some more stuff as I get better with what I already have.

What are you using?

The home brew community is one of those groups I just love. Everyone's enthusiastic, helpful, and excited. So... what are you working on? Got something in the fermentor? Something planned for the weekend?

I think having a hobby, something outside of your work that you enjoy doing and/or are simply just good at, is kinda important, and fulfilling. And so, I wanted to make a topic in general about what hobbies you might have and why that particular hobby appeals to you (along with some tips as to how a newcomer might be able to introduce themselves to the hobby).

For myself, I have recently gotten into the Rubix Cube and have had a lot of enjoyment learning some different methods and improving the time it takes me to solve it.

Started out with a non-descript cube from a supermarket and have recently purchased a GTS3M which I am enjoying a lot so far (plenty of online stores in a variety of countires that will deiver quickly and cheaply). I was able to find a plethora of tutorials on youtube (jperm and brodythecuber in particular) that I found very helpful. For any other cubers: favourite perms, methods, do you compete, tips?

Something, something first post, may not be perfect, but I want to be more engaged.

Hey everyone

If you're a fellow sailor, post your favorite boat, current boat and location here.

I'll start -
Fav boat : Hunter 42ss
Current boat : Broke college kid :(
Location : Great lakes

Also who was hyped for the Mackinac race last weekend ?

Anyone in here interesting in plants (growing, propagating, maintaining, etc). Figure we can get a forum started to exchange tips.

On a side note, some of the side categories seem overly broad. Hobbies for example is going to get pretty bonkers.

So, I am far from the most experienced, or the most knowledgeable, or the most active amateur radio operator out there, but it is something that has piqued my interest none the less. Before I got into the hobby, I always assumed that the FCC just game amateurs a small bucket of useless spectrum and that was it. Maybe you could fly an RC plane, but surely that is about as cool as it gets.

It turns out I was dead wrong. Amateurs are allocated bands all across the RF spectrum - more or less. Bands from way below the AM broadcast frequency to way above the microwave frequencies used by our cell phones and wireless routers. Also, you are allowed to legally transmit at up to 1.5 kilowatts of power! That's 3,000 times as much power as your average walkie talkie! :) Also, importantly, the license exam only costs $15.

At many of the lower frequencies, the signals bounce off the ionosphere and you can make contact with people all over the world (propagation gods permitting). At the higher frequencies, you lose that "skip propagation," but more bandwidth is available. There are analog voice repeater networks, digital packet networks, mesh networks running on modified commercial WiFi gear, and even a handful of old school packet BBSes. There are some LEO satellites which run voice repeaters which allow you make international contacts, and sometimes even the International Space Station will participate in events. Lots of cool stuff going on. This hobby is kind of a bottomless rabbit hole of possibilities.

I got my technician license about a year ago, and I have been most interested in the data networking end of the hobby. Despite being a pile of hacks, APRS is still very cool, and sometime soon I hope to set up an AREDN node of my own. Every once in a while I'll call into the local repeaters and shoot the breeze.

So there's my story. Are there any other hams out there?