Im just kind of done with Windows and 10 has been stable, but 11 seems to be even more intrusive and I find all the AI 'assistance' to be incredibly annoying. Im just kind of done with MS and Office and I want to try something else.

I dont have many needs. I run LibreOffice spreadsheet and word processor and the only other software I need to work is CORELdraw and CORELpaint as I still do a fair bit of design work on them and Ive been using them for 30 years so I dont want to switch. Other than that its just browsing (Firefox), email (Thunderbird) and TurboTax.

My question is how do I know whats going to work until I try it? And which version of Linux is easiest and most stable? I dont want to have to keep upgrading, I just want a stable usable fairly easy to learn OS that works with what Ive got as Im unlikely to be changing much. Suggestions?

I have been planning to make the switch to Linux as a daily driver for a while and have researched many different distros. I have seen a lot of discussion online about Bazzite and other similar distros based on Fedora Atomic. It sounds like it would be more stable, and less likely for you to accidentally break something, but installing software other than Flatpaks requires running it in some kind of container such as Distrobox. Some people say it's annoying, others say it's good since you mess up the container rather than your system.

I have used SteamOS on Steam Deck, and notice that things have "just worked" more than what I have personally seen with "normal" distros on laptops or desktops. For example, I've never really had any issues installing things and running software on SteamOS, but someone I know using Mint has seen seemingly minor things cause massive glitches on their system, or they've run into strange difficulty just installing certain programs like Steam. Would one of these types of distros, especially Bazzite which specifically is trying to be like SteamOS, be closer to that Steam Deck experience?

Has anyone here tried one of these distros and had any thoughts? Anything you loved, or was anything a deal breaker?

The Issue

I'm streaming games from a desktop PC hardwired into my router (running Sunshine) to a laptop wirelessly (using Moonlight). It works beautifully.

Except, every five minutes, the stream chugs: my framerate drops precipitously, and Moonlight gives me a warning telling me I should lower my bitrate. This happens for only a few seconds, before it resolves and goes back to normal.

I timed the interval between the chugs several times and got approximately 5:07 between each slowdown. It is remarkably consistent.

Because it's so consistent, I assume there's some scheduled task or something running every five minutes that's causing it to chug. Dropping the bitrate makes the chugging less noticeable, but it still happens.

Ruling Things Out

I think it's safe to rule out the idea that it's my router or the host PC.

I have a smaller 13" laptop that I used to stream to, and I just recently bought a 17" to replace it. The five-minute issue only happens on the 17", even with identical stream settings (same resolution, FPS, and bitrate).

The computers are obviously different hardware, but they're also running two different linux distros.

The 13" Laptop is running MX Linux 23.5 (KDE). This is the one that works.

System:
  Kernel: 6.1.0-32-amd64 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    Desktop: KDE Plasma v: 5.27.5 Distro: MX-23.5_KDE_x64 Libretto September 15
    2024 base: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: Laptop System: Dell product: Latitude 7370 v: N/A
    serial: <superuser required>
  Mobo: Dell model: 0XFY7T v: A00 serial: <superuser required> UEFI: Dell
    v: 1.28.3 date: 02/07/2022
Battery:
  ID-1: BAT0 charge: 12.6 Wh (62.1%) condition: 20.3/34.0 Wh (59.6%)
    volts: 8.1 min: 7.6 model: SMP DELL WY7CG58 status: charging
CPU:
  Info: dual core model: Intel Core m5-6Y57 bits: 64 type: MT MCP
    arch: Skylake rev: 3 cache: L1: 128 KiB L2: 512 KiB L3: 4 MiB
  Speed (MHz): avg: 2496 high: 2758 min/max: 400/2800 cores: 1: 2400 2: 2758
    3: 2400 4: 2429 bogomips: 11999
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel HD Graphics 515 vendor: Dell driver: i915 v: kernel
    arch: Gen-9 bus-ID: 00:02.0
  Device-2: Realtek Integrated_Webcam_HD type: USB driver: uvcvideo
    bus-ID: 1-9:5
  Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915
    resolution: 1920x1080~60Hz
  API: OpenGL v: 4.6 Mesa 24.2.8-1mx23ahs renderer: Mesa Intel HD Graphics
    515 (SKL GT2) direct-render: Yes
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Dell driver: snd_hda_intel
    v: kernel bus-ID: 00:1f.3
  API: ALSA v: k6.1.0-32-amd64 status: kernel-api
  Server-1: PipeWire v: 1.0.0 status: active
Network:
  Device-1: Intel Wireless 8260 driver: iwlwifi v: kernel bus-ID: 6c:00.0
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
    bus-ID: 1-2:2
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1
    lmp-v: 4.2
RAID:
  Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
    v: 3.0 bus-ID: 00:17.0
Drives:
  Local Storage: total: 238.47 GiB used: 31.99 GiB (13.4%)
  ID-1: /dev/sda vendor: Toshiba model: KSG60ZMV256G M.2 2280 256GB
    size: 238.47 GiB
Partition:
  ID-1: / size: 232.43 GiB used: 31.47 GiB (13.5%) fs: ext4 dev: /dev/dm-0
    mapped: luks-a8eaaa90-b4ba-4943-8c1d-ddace5892f40
  ID-2: /boot size: 973.4 MiB used: 524.1 MiB (53.8%) fs: ext4
    dev: /dev/sda2
  ID-3: /boot/efi size: 252 MiB used: 274 KiB (0.1%) fs: vfat dev: /dev/sda1
Swap:
  ID-1: swap-1 type: file size: 3 GiB used: 3.8 MiB (0.1%) file: /swap/swap
Sensors:
  System Temperatures: cpu: 80.0 C pch: 68.0 C mobo: 48.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 251 Uptime: 33m Memory: 7.65 GiB used: 3.56 GiB (46.6%)
  Init: SysVinit runlevel: 5 Compilers: gcc: 12.2.0 Packages: 2789 Shell: Bash
  v: 5.2.15 inxi: 3.3.26

17 *    * * *   root    cd / && run-parts --report /etc/cron.hourly
25 6    * * *   root    test -x /usr/sbin/anacron || { cd / && run-parts --report /etc/cron.daily; }
47 6    * * 7   root    test -x /usr/sbin/anacron || { cd / && run-parts --report /etc/cron.weekly; }
52 6    1 * *   root    test -x /usr/sbin/anacron || { cd / && run-parts --report /etc/cron.monthly; }

The 17" Laptop is running Linux Mint 22.1 (Cinnamon). This is the one that has the five minute chugs.

System:
  Kernel: 6.8.0-58-generic arch: x86_64 bits: 64 compiler: gcc v: 13.3.0
  Desktop: Cinnamon v: 6.4.8 Distro: Linux Mint 22.1 Xia
    base: Ubuntu 24.04 noble
Machine:
  Type: Laptop System: Dell product: Inspiron 7773 v: N/A
    serial: <superuser required>
  Mobo: Dell model: 0R58C3 v: A00 serial: <superuser required> UEFI: Dell
    v: 1.19.0 date: 12/15/2021
Battery:
  ID-1: BAT0 charge: 34.9 Wh (97.5%) condition: 35.8/56.0 Wh (63.9%)
    volts: 16.0 min: 15.2 model: Samsung SDI DELL W7NKD7B status: discharging
CPU:
  Info: quad core model: Intel Core i7-8550U bits: 64 type: MT MCP
    arch: Coffee Lake rev: A cache: L1: 256 KiB L2: 1024 KiB L3: 8 MiB
  Speed (MHz): avg: 658 high: 867 min/max: 400/4000 cores: 1: 400 2: 800
    3: 400 4: 400 5: 800 6: 800 7: 867 8: 800 bogomips: 31999
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel UHD Graphics 620 vendor: Dell driver: i915 v: kernel
    arch: Gen-9.5 bus-ID: 00:02.0
  Device-2: NVIDIA GP108M [GeForce MX150] vendor: Dell driver: nvidia
    v: 550.120 arch: Maxwell bus-ID: 01:00.0
  Device-3: Realtek Integrated_Webcam_HD driver: uvcvideo type: USB
    bus-ID: 1-5:2
  Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X:
    loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa dri: iris gpu: i915
    resolution: 1920x1080~60Hz
  API: EGL v: 1.5 drivers: iris,nvidia,swrast platforms:
    active: gbm,x11,surfaceless,device inactive: wayland,device-2
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: intel mesa
    v: 24.2.8-1ubuntu1~24.04.1 glx-v: 1.4 direct-render: yes renderer: Mesa
    Intel UHD Graphics 620 (KBL GT2)
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Dell driver: snd_hda_intel
    v: kernel bus-ID: 00:1f.3
  API: ALSA v: k6.8.0-58-generic status: kernel-api
  Server-1: PipeWire v: 1.0.5 status: active
Network:
  Device-1: Intel Wireless 3165 driver: iwlwifi v: kernel bus-ID: 02:00.0
  IF: wlp2s0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
    bus-ID: 1-7:3
  Report: hciconfig ID: hci0 rfk-id: 4 state: up address: <filter> bt-v: 4.2
    lmp-v: 8
Drives:
  Local Storage: total: 238.47 GiB used: 36.5 GiB (15.3%)
  ID-1: /dev/nvme0n1 vendor: Samsung model: MZVLB256HBHQ-000H1
    size: 238.47 GiB temp: 25.9 C
Partition:
  ID-1: / size: 229.63 GiB used: 36.21 GiB (15.8%) fs: ext4 dev: /dev/dm-1
    mapped: vgmint-root
  ID-2: /boot size: 1.61 GiB used: 291.7 MiB (17.7%) fs: ext4
    dev: /dev/nvme0n1p2
  ID-3: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat
    dev: /dev/nvme0n1p1
Swap:
  ID-1: swap-1 type: partition size: 1.91 GiB used: 0 KiB (0.0%)
    dev: /dev/dm-2 mapped: vgmint-swap_1
Sensors:
  System Temperatures: cpu: 30.0 C pch: 32.5 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 16 GiB available: 15.36 GiB used: 1.82 GiB (11.9%)
  Processes: 338 Uptime: 2h 38m Init: systemd target: graphical (5)
  Packages: 1996 Compilers: gcc: 13.3.0 Shell: Bash v: 5.2.21 inxi: 3.3.34

17 *	* * *	root	cd / && run-parts --report /etc/cron.hourly
25 6	* * *	root	test -x /usr/sbin/anacron || { cd / && run-parts --report /etc/cron.daily; }
47 6	* * 7	root	test -x /usr/sbin/anacron || { cd / && run-parts --report /etc/cron.weekly; }
52 6	1 * *	root	test -x /usr/sbin/anacron || { cd / && run-parts --report /etc/cron.monthly; }

Help Request

Anyone have any ideas for tracking down what might be causing this? I was going to just wipe the machine and replace Linux Mint with MX Linux to rule that out, but I figured I'd ask here before doing that, especially because it could be the hardware and not the distro that's causing the issue.

Okay, I’ve been grinding through the process of replacing Windows 10 in my Twitch streaming setup with Pop!_OS. I’ve got OBS dialed in, my old NVIDIA card is holding it together surprisingly well, and video performance is right where I need it.

But the audio. Is. Destroying. Me.

It’s this horrible crunchy, crushed mess when I stream from Linux. Same exact hardware, same OBS scene setup. On Windows 10 it’s crystal clear. I’m pulling audio from my mixer and theres no “Line In” I can see. Something in the Linux chain is mangling it.

Here’s a side-by-side if you want to hear the pain:

Pop!_OS (crushed audio): https://youtu.be/wQUVlufAQs8?si=RlGH8Z90dK0X9KhA

Windows 10 (clean audio): https://youtu.be/hbJzIHzg_ek?si=ThiZpbBgTk89qL2p

Sample rates seem to match, nothing obvious is clipping. I’m out of ideas and running on pure stubbornness at this point.

Would love to hear from anyone who’s made Linux work in a similar setup. Tips, gotchas, weird fixes. Whatever you've got. I'm so close to fully escaping Windows here. Grrr.

For reference, here’s how I got my Pop!_OS setup working so far (OBS + NVIDIA NVENC + GTX 960):
https://doubledropdown.com/abdoanmes/2025/ditching-windows-setting-up-obs-with-nvidia-nvenc-on-linux-pop_os-gtx-960/

As per title this is inspired by my recent problems with a Latitude 7320 notebook.

I can't use my desktop right now and so wanted some cheaper nb for normal usage and eventually settled on this model due to being able to get it at an acceptable ratio of price to age and seeing it as compatible on Ubuntu, not noticing the disclaimer until later.

The problems started right after installing Fedora KDE - the nb was running at absolutely abysmal performance and this problem affects several models.

Running passmark I've got above 2000 on cpu, on Windows I had 11000. The cpu was throttling to 1500Mhz and lower for no reason. Switching a BIOS setting of power management to "ultra performance" got me to twice the score.

Eventually using throttled from github for various Lenovo and Dell models and thermald I was able to get to twice that again, still a fifth less than on Windows. Also the repo has potential of security concerns due to how it works, also potential to just stop working due to them later.

Mainly I'm posting this to just say that there is zero legitimate technical reason why this should happen, it works on Windows and on Dell tampered Ubuntu images. The hw is fine but for some reason someone somewhere decided to artificially limit the hw for whatever reason.

Right now I am still indecided if I should write off the several hours I've spent on this and return the machine to play the dice with some other model.

Edit 5.4.: it turns out I was not using the throttled package correctly and now have roughly equivalent performace in Linux as in Windows up from the 4/5 or so after all the other workarounds. All of the points still apply though. I also heartily recommend s-tui as a nice utility for cpu monitoring and stress test.

Hi Tildes community,
I'm seeking your suggestions for spinning up Windows virtual desktop.
Allow me to set the context...
My offspring is in second semester of their first year of university, and needs to use Adobe Photoshop for one of their classes this semester. They don't use a regular laptop, and have been doing quite well at uni. with their beefy Ipad. While they have used photoshop so far on their ipad, there are some growing pains. Of course, they have access to super beefy desktop Apple Macs at their school's computer lab, but its a pain to get usage of them for a few reasons. At home, all my machines are linux except for my partner's which is an old clunker Windows laptop - which i am in progress of migrating themn away from that Windows machine towards linux laptop...Hence, I don't really have a solid, modern enough machine for my offspring to load Photoshop onto.

Then, I thought, hey, maybe i can spin up some Windows virtual desktop somewhere for my offspring to use photoshop on...Its only needed for about 10 or 12 weeks remaining this semester...and they only need to use it once per week for each week's assignments. I feel like as long as the virtual windows machine is beefy enough to suppoort photoshop workloads, it can get them through the semester...and then in summer i can decide if I need to buy them an actual laptop (like an Apple laptop, etc.).

So, may i ask of you dear Tildes community members...Does my approach make sense (of trying to use a windows virt. desktop)? And, if so, are there any recommendations for which provider to use, and how to spin these up? Like, should i try something via AWS or Google Cloud or Azure? Or, should i not even consider this virtual windows approach? I'm open to hearing any/a ll recommendations. If you have links to share for me to research, or if you actually wrote your own blog post on similar topic for example, i'd love to hear it! Thanks in advance!!

Edit: 2025-02-24 UPDATE: Wanted to update folks on where i am on this...After reviewing these comments, researching some more both online and offline, etc...I arrived at the decision of biting the bullet and just buying my kid an Apple Macbook laptop. I want to thank you all for all your greet feedback and suggestions! Thanks so much Tildes community!!!