It just so happens that I was asked to write a paper about goals I hadn't achieved and I just thought about how I haven't touched my video game engine project in any meaningful way for around two months or so. On reflection, the main thing that is preventing me from working on it is that when I try to get back into it, I don't really know what I'm doing. I'm unorganized and can't figure out what exactly to do next because it's so open-ended. I'm absolutely terrible about writing down plans for what I should do.

I know that I'm not the only person who is trying to work on big solo projects, so I thought I'd ask: what are you doing to keep your project organized? Are you using any tools to help you? What do you find is most helpful to help you anticipate steps you'll need to address when things aren't very clear?

This topic is part of a series. It is meant to be a place for users to discuss creative projects they have been working on.

Projects can be personal, professional, physical, digital, or even just ideas.

If you have any creative projects that you have been working on or want to eventually work on, this is a place for discussing those.

I'm wondering if anyone has recommendations for daily sunscreens, specifically for my arms/legs. I have some Blue Lizard mineral sunscreen that I use but it's a little too greasy for me to really enjoy it for an every day sunscreen (apparently they've rebranded and have a new formula since the last time I bought it, so maybe it's better now? 🤷‍♂️).

I also have this NIVEA Super Water Gel that I absolutely love for my face/neck because it basically feels like lotion/isn't really greasy, but not sure I really want to spend as much to put that on my arms and legs every day.

Anyone have suggestions?

Hi, all.

I'd like to ask for a lazy recommendation. I last bought a KVM maybe 6-9 months ago and I returned it because of audio interference as well as low refresh rates on one operating system.

Ideally, I'd like the KVM to support:

• 1-2 4k monitors over either HDMI or USB-C at a minimum of 120Hz
• 1-2 USB-C peripheral ports
• 1-2 USB-A peripheral ports (presumably we're still at 3.1?)
• audio via 3.5mm
• RJ-45 @ 100 or 1000 Mbps
• a physical button to swap between inputs

For the most part we're talking about swapping between a MacBook Pro and a Windows Desktop. I would love if I could also include my Mac Studio in.the cycle of devices but I absolutely understand If I can only have two.

I hope you're all alright with me flippantly asking for a recommendation! I'm not a KVM expert. I spend my time elsewhere. I was really annoyed at the low performance of the previous KVM I bought. I hope there are folks on Tildes that can rave and rant about their KVM preferences. Thanks folks!

Add awesome game deals to this topic as they come up over the course of the week!

Alternately, ask about a given game deal if you want the community’s opinions: e.g. “What games from this bundle are most worth my attention?”

Rules:

• No grey market sales
• No affiliate links

If posting a sale, it is strongly encouraged that you share why you think the available game/games are worthwhile.

All previous Save Point topics

If you don’t want to see threads in this series, add save point to your personal tag filters.

As part of a weekly series, these topics are a place for users to casually discuss the things they did — or didn't do — during their week. Did you accomplish any goals? Suffer a failure? Do nothing at all? Tell us about it!

I've been slowly getting into sewing, mainly with the goal of making cosplay, but for now mostly repairing and altering clothing by hand sewing. Since I've stuck with it for some time now I am thinking of getting a sewing machine, since hand sewing larger things is a bit of a pain.

So now I am looking at some sewing machines and I have a few questions: Is buying a cheaper machine a waste of money? I've read some older topics here on Tildes and saw that Singer machines have a terrible reputation, so I probably should avoid those? What kind of features should a machine definitely have? For example I am looking at something like the Janome Juno J15, is this still basically a toy or would it be enough for most things?

I'm a fairly new detectorist, only been detecting for 25 months, I've only used five detectors Nokta Simplex Plus, Nokta Legend, Minelab Vanquish 540, XP Deus, XP Deus 2, so most of my knowledge of other machines comes from YouTube videos and forum posts, not first hand experience, this post will be all over the place as I didn't plan it out, sort of a stream of consciousness, all prices are in Canadian dollars, it should be cheaper in the USA but with new tarrifs who knows

I guess the biggest issue budget, machines are expensive, the cheapest machine I think worth getting is $275 and the most expensive general use ones break $2000, specialized machines can be $3000 to maybe $10,000 like pulse induction and imaging machines

Also, if you want to just hunt parks and such, you can get away only using single frequency machines, but if you want to hunt salt water beaches, or even freshwater beaches with lots of black sand, you are going to want a multifrequency machine that runs multiple frequencies at once

I am only going to mention on the main three manufacturers in the bulk of this post, Nokta, Minelab, And XP, but at the end I will briefly touch on Garret and Fisher and Bounty Hunter

I guess first I'll list the single and multifrequency machines, since it depends the environment you want to search

I don't know if I need to leave a space under each line like reddit, so I will

The single frequency detectors are;

Nokta Simplex lite

Nokta Simplex BT

Nokta Simplex Ultra

Nokta FindX

Nokta FindX PRO

Minelab Xterra Pro

XP Deus (1)

The multifrequency detectors also have single frequency capabilities unless otherwise mentioned, they are;

Nokta score

Nokta Double Score

Nokta Triple Score

Nokta Legend

Minelab Vanquish 340 (no single frequency)

Minelab vanquish 440 (no single frequency)

Minelab Vanquish 540 (no single frequency)

Minelab Equinox 600

Minelab Equinox 800

Minelab Equinox 700

Minelab Equinox 900

Minelab Xterra Elite

Minelab Manticore

XP Deus 2

Our of all those detectors, I don't recommend the vanquish series, even though they work great at the beach, the box is not water proof, a rouge wave could end it's whole career

I also don't recommend the equinox 600 or the equinox 800 as the suffered from leaking issues and broken coil ears, the 700 and 900 came out addressing those issues

So, if your budget is on the lower end, and you are never going to go to a salt water beach, or you don't want to fiddle with setting and just want a turn on and go machine, the Nokta FindX Pro is a good choice, it's $275, the cheapest machine released to compete with other cheap Chinese machines on Amazon, there's a YouTuber I know who does very well with it, it's definitely not a toy machine, like a couple I didn't mention, like the Xterra Voyager released for kids by Minelab, and a Nokta one I forget the name

If your budget is a little more and you will not hit a beach, the simplex machines or the Xterra pro come in next, they have some settings to tweak, and the Xterra pro has selectable frequencies up to 20khz

I guess this is a good time to put a little blurb about frequencies, lower frequencies like to hit higher conductors like copper or silver

Higher frequencies like to hit mid to low conductors like gold or iron

lower frequencies use more battery power and go deeper

higher frequencies use less battery power and don't go as deep

higher frequencies will also hit smaller targets than lower frequencies

On the market there's machines that will go from 4khz to 120khz as of today, a new high frequency coil was released for the XP deus 2, most machines where you can't select a frequency will use somewhere between 10 and 15khz which is a good medium frequency

And last for the single frequency machines is the XP deus 1, which is a very old machine now, I don't recommend getting it unlss you can get one super cheap second hand, it's still $1000 in stores and if you get the high frequency coil that's another $500, and as of today the deus 2 released it's high frequency coil, so it kinda makes the deus 1 deprecated imo, I can't think of a spot where I would use the deus 1 any more once I get the new coil for the deus 2

Now for multifrequency machines, like I said the vanquish is a good machine, but there's no single frequency option and it's not water proof, features all other multifrequency machines have

The score, double score and triple score are water proof, infact the triple score pro pack is the best bang for your buck you can get, it cost $670 and comes with the good elliptical coil, a big coil, a hand digger, a pouch, headphones, a hat, and a pinpointer, basically everything you need to get started, if I was getting my first detector I would strongly consider the triple score pro pack, the detector itself is almost as good as the top tier detectors when it comes to unmasking targets

The Minelab Xterra elite is a newish release, it's a nice multifrequency machine with a single frequency option and is water proof, it's released to compete with the triple score

The Nokta legend and Minelab Equinox (700 and 900) were the flagship models for a while for their respective companies, the legend has a few more settings than the triple score, and the equinox has more settings than the Xterra elite and the vanquish, both legend and equinox are water proof, have multifrequency and multiple single frequency options, the legend has single frequency options between 4 and 40khz, and I'm not sure about the equinox but it's probably similar

The top two machines on the market are the Minelab Manticore and the XP deus 2, both machines cost in the ballpark of $2000

I don't know much about the Manticore, but it gets high praise from people, the deus 2 has the best audio on the market, the deus 2 is my favourite machine I ever used

So in summery, I guess if you're on a budget and not hunting the beach, go for simplex, findX, Xterra pro

If you are on a budget and hunting the beach go for a score machine, the best one in your budget, or a vanquish but be anal about not getting it wet

If you are not on a budget but don't want to pay $2000 go for the legend, equinox triple score, or Xterra elite, these machines have room to grow into them

If you sure you will stick with detecting a long time, and you have lots of money, might as well go for a Manticore or deus 2, these machines will be relevant for a long time to come probably

And I said I'd touch on other brands, bounty hunter you could get if your just curious if you even like detecting, it's about $150 for the tracker iv, and it will find stuff, but it's a very basic machine, I rather use the findX pro

Garret machines STAY AWAY FROM THE VORTEX, It's been plauged with problems since release, their engineers should be ashamed of themselves, other Garret machines work okay, if you can get one cheap second hand, it could be a way to go, but if you pay full price for one you can get better working machines for the same price range

Fisher is older, and works okay, again if you can get one second hand for incredibly cheap maybe it would be okay, but they are really outdated, I do want to try the Fisher cz21 but it cost $2000 and i don't want to try it that bad

If I wasn't clear on something let me know and I'll try to clarify

Ever since I was a kid, I thought planetary rings were cool, and whenever I scribbled a non-specific alien planet I would give it rings. Lately I have been worldbuilding for a story, and naturally I gave the world rings. But since I made that decision, I've paid more attention to rings in other sci-fi I watch.

There's a lot of sci-fi planets out there with their own Saturn-esque rings. Very often it's just there for the vibes. In the opening to Rogue One, for instance, Galen Erso's farm is on a planet with rings, but this doesn't really come up or affect the plot in any way. I forgot this until I recently rewatched the movie. Similarly in the Foundation series on Apple TV+, even though the protagonist is from an ocean planet with rings (that are beautifully rendered), the rings never really come up. The endless ocean ends up driving both plot points in the show and the superstitious culture of the people who live there, but the ring does not. Maybe this is discussed more in the Foundation books but I'm not familiar with those.

Sometimes rings end up being plot relevant, like in Alien Romulus, where instead of being set dressing, the rings are an obstacle that can cause the space station to crash. Still, the rings don't directly impact the planet or the people who live there. The thing that more directly affects the colonists' lives is the atmosphere blocking the sunlight instead.

What really got me thinking was when I saw this Sci-Show video a few months ago about research that Earth possibly had rings about 450 million years ago. The rings lowered the overall global temperature and caused more extreme summers and winters due to light reflecting off of them. This made me realize rings can add quite a lot to the actual worldbuilding, since besides from the obvious cultural impact on any humanoid life, it can cause big environmental changes as well. This is pretty obvious when you consider how The Moon can do many things that affect life on Earth such as the tides.

Of course there's nothing wrong with stories hand waving away these types of questions, but it's interesting when stories like Three Body Problem take these tropes like living in a multi-star system and consider how that would mess with the people living there.

Astronomy nerds and sci-fi fans of Tildes, are there any other interesting ways rings would affect life on a planet?

What have you been doing lately for your own fitness? Try out any new programs or exercises? Have any questions for others about your training? Want to vent about poor behavior in the gym? Started a new diet or have a new recipe you want to share? Anything else health and wellness related?