I’m building a house and will have ample opportunity to walk with the builder to specify outlets, cat 6, and coax runs and locations. What sorts of little things do you wish you had done in your house or would be useful?

I plan to run cat 6 from mostly every room (some in multiple locations) to the office where my servers will be. I will also be running a few runs of cat 6 out to the shop for future connectivity out there. Anything else that might be useful?

I have a box of scrap parts of PLA left over from 3D printing and I'm wondering what to do with them. PLA can apparently biodegrade but only in really specific conditions I don't think I can achieve like keeping it at 60c. I know there is a device that can turn the scraps in to new filament but its way too expensive for me. What should with this stuff?

I'm always in the market for new podcast recommendations, so here are some of mine. All available via your regualar podcasting app, probably.

No Such Thing As a Fish, the QI podcast. Odd facts and trivia. Rarely do I hear things I already know on this one. Obviously it's no Answer Me This but what is?

A Problem Squared, comedian Bec Hill and stand up mathematician Matt Parker answer listener questions, usually in excessive and fascinating detail. The presenters are good friends in non-podcast life and it shows in their chemistry.

The Guilty Feminist, a great mixture of standup comedy and discussion on a wide range of topics. Great selection of guests.

Lateral, Youtuber Tom Scott hosts a panel quiz where lateral thinking is rewarded. Fairly lightweight but still fun.

A Podcast of Unnecessary Detail, the Festival of the Spoken Nerd team do a podcast (Steve Mould, Matt Parker, Helen Arney). It is as you might expect, nerdy facty sciency stuff.

Wheel of Misfortune, comedians Fern Brady and Alison Spittle take listener submissions on unfortunate or embarrassing events and discuss their own misfortunes with a guest with a different topic each episode. More funny than perhaps it sounds.

Hey guys, anyone else into keyboards? Would love to hear about what you use or experiment with, I've only been into the hobby a few months so I am still pretty new. I'd love to hear your guys set up and what got you into it, how it's evolved.

Currently rocking a Keychron Q2 (65%) with Tecsee purple panda switches and Drop MT3 Cyber keycaps - Co piloting this is a KBDcrafts Addams numpad with their s2 engine switches.

I do also have a keychron Q8 (Alice) in transit - I plan to swap the switches to the KBD s2 engine switches as I am really liking them on the numpad. I ordered this model because my carpal tunnel issues are what awoke me to the mechanical keyboard world, the alice layout isn't perfect but better than standard for ergos it looks like.

Early on in the hobby I was convinced I'd be a tactile switch guy, but the s2 engine switches really changed my mind on liking linear, eager to try a full board with them.

This got rambly, but would love to hear from others into the hobby!

I was just in the thread about if stores should stop accepting cash, and to my horror there was many people advocating to getrid of small change

So are there any coin roll hunters here that would be mega bummed out if we got rid of small change?

Here in canada, there's still some neat coins you can find in circulation

with nickels you can still find old laureate crown portraits and even older king George the 6th, and if your super lucky to hit a collection dump, king George the 5th nickels

With dimes there was still many silver dimes you can find in circulation, I recently hit 4 rolls of silver dimes on a hunt, awesome collection dump, thats $370 worth of silver for $20, I rode that high for days

Quarters still have some old silver coins in circulation, but not as many as dimes

And Canada has something bad the americans dont have ARP, alloy recycling program, you see in canada all modern coins are made of steel on this inside, with plating of other metals,like nickel plated steel or bronze plated steel

So dimes and quarter pre 2000 are 100% nickel, and ARP takes them out of circulation

Nickels pre2000 are same alloy American nickels and pre 1982 are 100% nickel, ARP takes both these out of circulation

So in canada us coin roll hunters are scrambling to get the coins we want before ARP does

If there are no coin roll hunters to speak up on tildes, AMA about coin roll hunting

I'll start, Sony A7C, w/ Tamron 28-75mm f/2.8 as my main lens. Have a Sony 28-60mm f/4 as well, though its more for where I need a really compact setup.

Looking to get a Tamron 20-40mm f/2.8 for a little extra fov when indoors, while still having some reach. Planning on getting the A7CII when it comes out supposedly later this year according to sonyalpharumors.

Reject modernity, return to analog

Let's talk retro tech, or anything of the sort! What projects or hobbies are you currently working on? Are you leaning towards a crisp hi-fi sound for your turn-table (yo), or just browsing eBay for old broken tech you know you don't need? Is this submission just a cry for help, because I've found myself browsing old Bose Wave systems from days gone by?

I have a box full of old Gameboy motherboards I need to do something with (the current plan is to gift my close friends their own modded Gameboy, because seriously why can't I hold all these Gameboy motherboards). Then there's my AIWA Walkman that needs a new belt, but I've never cracked one of those open before, so we'll see. Then there's this Gameboy Camera mod that is keeping me up at night.

What about you fine folks? I thought about posting this to ~tech, but I thought ~hobbies was just as relevant, since this isn't exactly leading edge stuff (though it may be in the retro tech space!)

I'm on day 4 of a 4 day weekend (lucky me!) here in zone 7b, so I've been spending a lot of time out in the garden. The bunnies and deer have been keeping me busy chasing them out, and have entirely beheaded my tomatoes and peppers, but haven't touched the flowers and herbs at all.

We're on week 4 of very little rain (we got about 5 minutes of thunderstorm two days ago, but that didn't do much more than make the grass wet). I set up an automated irrigation system in my garden bed so it is extremely well watered and lush, and everything else is dry, the grass is yellow and the trees are starting to look wilty. I think that's part of what is attracting the herbivores to my garden, it's like a little oasis, so I can't be too mad about it. Luckily it looks like it's supposed to rain every day next week!

My peas are done for the year, so I pulled them out, and I have lots of tiny green peppers, tomatoes, and cucumbers, but nothing much else. I'm thinking to plant beans where the peas were. Do you have a favorite crop that is harvested in June that can fill this gap? What sorts of things do you plant in June in your zone?

I've been struggling with herbivory indoors too - the stupider cat decided for the first time that transcendentia zebrina was the best thing ever, and took several leaves off. Luckily it's not very toxic, she didn't actually consume much, and she doesn't seem to be showing any symptoms of poisoning, but now I'm trying to figure out how to keep this plant in the same window but out of her reach. Any recommendations for shelves or hanging baskets that would work in front of a window in a bedroom/office?

I also gave my extremely leggy silver ann pothos a haircut, so it looks much better. I cut the trimmings into 3-4 node sections and they are all now in very damp soil to hopefully root - I got 36 sections so I'm sure I'll have at least some successes, although I'm hoping they aren't ALL successful or I will be drowning in pothos!

I'm very on board with the concept of permaculture, and while I understand the concepts I don't have a good intuition for which plants fix which nutrients. For example suppose I grow basil in my herb garden.

How do I figure out which nutrients it will eventually deplete? How do I figure out a good buddy crop(s) to replenish those nutrients?

Any permaculturists out there that can point me in the right direction?

Anyone using a drip irrigation system they can recommend? This would be for watering veggies (and possibly flowers in the future) in raised beds. These are some of the things I’m looking for but I’m getting a bit overwhelmed with all the choices out there:

• network capability, whether that be an app (iPhone) or website I can look at stats and control from
• 2 different garden beds to start with (3’ x 8’), with possibly 2 more in the future
• drip is the only irrigation I’m really concerned with so no need for sprinklers or anything (I don’t think, at least)
• there is only one spigot available for the area the beds are in

I've got a K40 laser engraver that I've had a lot of fun getting up and running with K40 whisperer on a Raspberry pi, and lately I've been thinking about getting a cheap 3d printer. Does anyone have an entry level 3d printer they like and want to recommend? What kinds of projects do you like to make? Anybody have a desktop cnc or other fun toys? Let's hear about 'em.

I have an Aerogarden Harvest. It's a pretty neat little device I picked up a few years ago on sale, and I use it as a starter for my outdoor garden. My outdoor garden inevitably fails due to forgetfulness, rabbits, or bugs. This year, after my lettuce was ravaged for the third time, I decided I'd like to scale up my indoor growing solution. My wife is on board, albeit hesitantly as she knows I'm a utilitarian and give little concern to form once function is established. We have a relatively small space, and no out-of-sight-storage-rooms to utilize for the project.

In short: I'm looking for advice on small scale, low startup cost hydro/aqua/aeroponic DIY projects for leafy greens/herbs that can be made to be "cute" or at least finished-looking, rather than a heap of PVC and 5 gallon buckets.

My best guess currently is one of the single-tower vertical PVC pipe systems with a nice hardwood box built around the 5 gallon bucket sump (lipstick on a pig) or a stacked/tiered NFT system with a nice wooden frame and channels made from some "nicer-looking" gutter.

Has anyone here actually accomplished an indoor grow that they were allowed to keep in their kitchen?

Edit: There's been a lot of great input here. I'm still researching, and if anyone else is going down this road, this channel has been very informative: https://www.youtube.com/@KeepOnGrowin

Since it seems we have a few other cyclists on here, I thought I would ask for a recommendation. I'm looking at bike computers, and I've been going back and forth between Wahoo and Garmin. I don't need anything super fancy, so I've been looking at the Bolt or the 530. I really want it for making a route on the computer, and then getting directions at turns (along with the basics like speed, distance, time, etc.).

My biggest priority is stability and battery life. I've read some reviews of the Wahoo saying it crashed or froze on them, which would be a huge turn off to me. My current "computer" is just a simple magnet on the wheel that runs a sensor - it never crashes or freezes or anything like that, and I change the battery about once or twice a year.

So, I'm curious if anyone has suggestions or experience with these.

And also I just wanted to get more cycling content on here... :-)

Do you Fish? Do you eat them or let 'em go? How'd you get into it and what were the confusing bits? Memory of a good time or lessons you wished someone taught you?

Do you want to try but haven't ever been? Did you fish as a kid and never again? What would make it easier for you to give it a go? Tried your city's "learn to fish" programs? What if you had someone else clean and cook it?

If your experience or interest limited to digital fish only, what's your thoughts on why every game and its predecessor has fishing mini-games? It's the dangnabbit armageddon but let's pause and fish for a bit first. Wild.

inspired by this super cool thread on treasure hunting kind of fishing,

I'm a knitter, cross stitcher, and general nerd. I can't actually create at the moment due to probable carpal tunnel, but I would love to see my fellow fiber artists of any and all genders speak up.

As for me, it's more about the process than the product! I love Grandmother's Favorite dishcloths as a mindless knitting stim, or cross stitching on a project until my hands hurt.

ETA: I'm not trying to ignore everyone. I'm really excited with the responses I'm getting. I'm just fighting some serious pain this morning. I'll try to reply to folks as soon as I can think!

ETA2: This got bigger than I had hoped! I don't think I can catch up and reply to everyone, but I do appreciate reading everyone's experiences! Thanks for humoring me today.

Hey there LEGO enthusiasts - wondering what you all do with kits after you build them? I really enjoy building LEGO (especially large complicated sets) but I don't want LEGO models taking over my house and getting dusty. What do you do?

I'm personally a little busy for 3d printing at the moment - but I love to see and be inspired by what others are doing. I know this is text based, but I'm also interested in what issues you are running into. I find it useful to see examples of what common problems and solutions others are running into.

I've got an "old" Prusa MK3S that is still going strong for me. When I get the time again I've got a few projects lined up: a brain, a mask, and a fluid desk sculpture that I'm excited to get printing.

What have you been printing lately?

Just curious. I've been trying to understand watercolors better. What I love about watercolors: so much expression, so much freedom. It also seems like a uniquely frustrating medium; understanding how much water is needed, how water reacts with certain papers, different types of brushes, etc. (I should mention it's the only painting I do, so maybe this stuff isn't unique to watercolor.)

Curious if there's any other watercolor enthusiasts here. Care to share your experiences, or tips for a novice?

I have 3 gal of blackberry wine aging on oak cubes in a carboy right now. Relatively new to the hobby but my best so far have been elderberry wine (full bodied and tannic, kind of like a Cabernet), and apple wine from store-bought juice (dry and crisp). This fall I'm planning on sourcing some locally grown Pinot Noir and trying my hand at making a "real" wine for the first time.

I'm in zone 4b so it gets frigid here in winter, I'm thinking wood burning stove and I bought the thickest double walled plastic panels for the roof that I could find. I'm just finishing an insulated slab and I'm about to start framing. Please share with me any photos, plans, or guidance you might have! I have no idea what I'm doing!

Hello Tildes geocachers! Found any good caches lately? Going in any good trips? Going to the Greater Bay Area Mega at the end of the month? I would love to know, and meet you online! I’d love to learn more about any interesting caches you’ve found lately and maybe we can discuss puzzles and challenges here.

So I got a 1.20m, 30kg punching bag, and hung it on the upper floor. I don't have boxing gloves yet but my friend suggested I just use cloth bandages on my hands. I'm looking for a boxing gym near me. I'm open to any striking art but I've done taekwondo before and I'd really like to concentrate on boxing now. I can throw basic punches. I've been watching some videos on boxing basics and I think it's awesome. Anything I could start working on for myself?

I'm already confident in self-defense. I don't have any specific reason to do it other than boxing looks fun. It's something I've been meaning to get into for years.

I'm not in shape at all.

Tips are welcome!

First and foremost: I'm not certain whether this belongs in ~hobbies or ~comp. As I consider this a hobby, this seemed like the more appropriate spot, but I'm more than happy to move/repost in ~comp.

So for the past few years, I've really been hit by the computer nostalgia bug. It originally started as me just wanting to dive back into MUDs, and the whole retrocomputing fascination probably came from me wanting to recreate the "good ole' days" where I would pull up the Windows 98 terminal app and connect to my favorite MUD.

Now I've got a room in my house dedicated to this old, esoteric hobby that happens to take up a lot of space. Admittedly, I don't know a TON about hardware but I've been having a blast tinkering around on old machines. It's even more fun to see how I can push the limits of the computers given a few modern tweaks here and there.

Here's what I've currently got sitting up in the Upstairs Museum of Retrocomputing:

• A Compaq Prolinea 5/75 Pentium - this was given to me by a friend who had it sitting in the basement. To my surprise, everything was still in working order and it fired right up (Windows NT 4.0!) on the first try. Of course, I ripped out the old barrel clock battery and put in something safer. I'd say I tinker with this one the most on the software side, while still trying to keep the hardware as close to original as possible.
• A Compaq Prolinea 3/25s 386 - I just picked this bad boy up and am working on getting an OS installed. It had some damage from a leaky clock battery but I don't believe anything was irreversible. I'm not too confident in the whopping 4 MB of memory, but I'm planning on installing Windows 3.11 on this one.
• A Tandy TRS-80 CoCo 2 - It works, but I haven't spent a ton of time with it because I don't have an old TV or monitor with a coax connection. I'd love to figure out how to create my own cartridge with a homebrew version of Zork or Adventure.
• A Power Mac G5 - It's not ancient, but I think it's still worthy of being in the museum. I haven't had a chance to play around with it yet because I don't have the right video cable. I'll get around to it eventually.
• A Generic Pentium 4 - I actually found this one at a Goodwill store. This one fired right up and had a copy of Windows 2000 installed, including all of the old work files that the person left intact. This one has been the easiest to mod because it's somewhat closer to modern and uses a common form factor. So I've plugged in a new OS, new ethernet, etc. At some point the technology starts to blur and you start questioning why you aren't just using a modern computer.

What's next on my list? I'd like to start playing around with computers/OSes that I'm unfamiliar with. I grew up in a DOS/Mac OS 7-10/Windows world, so I'd love to get my hands on a NeXt, BeOS, etc. or even an Apple II.

But first I need to get the damn 386 running again.

In a few weeks, I'll be making a short trip (3 days) to Palo Alto, working in the Stanford Medical Center area.

I'm hoping for some local or experienced insight into "don't miss" destinations for food, culture, history, and sight-seeing. It's likely I'll only have Sunday afternoon and weekday evenings free, so the personal tour may have to be more focused than local guides might otherwise suggest.

My home area has great food, but I'm really starving for Eastern cuisines. I'm willing to go beyond what a corporate travel budget permits if there's truly extraordinary, "can't get anywhere else" dining available.

Your insights are greatly appreciated!

Curious to see and talk with others about using AI to dynamically write personal novels as a hobby, a form of choose-your-own-adventure where you can offload part of the creativity and majority of the grunt-work involved with writing onto the AI.

I started around half a year ago with Novel AI, yet when my stories would reach around the 15,000 word count the context management required due to the 2k token limit caused for a a net negative experience. A few months ago I experimented with ChatGPT at its 4k token limit, but the major cons of the limited ability to edit the content combined with the "always happy" bias hard-wired in made it short lived. That is until I discovered the variant site, Open AI Playground in Chat mode. It isn't free, but the first $5 are free as a trial. (And technically they mention it isn't for entertainment purposes and to use it responsibly)

Using the Playground I've written a 41,000, 23,000, and 21,000 (in-progress, plan is to hit 6 digits) word count personal stories/novels/adventures thus far. Using the co-DM system of bouncing with the AI to suggest creative alternatives (e.g. "List 10 twists that could occur next in the story"), adding creative embellishments (e.g. "Describe the city in detail, using epic high-fantasy influence"), and many other tips it's kept me hooked on some wild adventures across my favorite genre(s), tailored to me.

Edit:
OpenAI just released a GPT 3.5 Turbo 16k model for the Playground, lol. Absolutely obliterating NovelAI's 2k and the previous 4k limits. You could fit a significant portion of an entire novel and it'd take into account every sentence said. It'd probably take a pretty penny to use even half the context window, but could be useful for more critical moments of my novels.

I'm an amateur fish keeper who is looking at buying a new 4ft tank setup.

While on the hunt for a nice looking cabinet and tank combination, I've noticed that most freshwater setups are designed for a canister/ hang on back / in tank filter, whereas saltwater is almost always designed as a sump configuration despite the same physical tank size and capacity.

Is there a reason freshwater tank setups are less likely to be sold in a sump configuration? Does salt benefit more from an overflow style of filtration then freshwater does? Should freshwater be pulling water for filtration from lower in the tank because there's likely slower water movement and therefore debris will settle on the substrate?

As a quick example, AquaOne have a "freshwater" range, and a "marine" range. They are available in comparable physical sizes, but the freshwater tanks are not drilled for sumps whereas the marine are. No matter how fancy / big you go in the freshwater configuration, you never have the option of a sump.

Freshwater list: https://aquaone.com.au/2015-04-16-04-47-04/2015-04-16-06-00-17/coldwater-tropical

Marine list: https://www.aquaone.com.au/2015-04-16-04-47-04/2015-04-16-06-00-17/marine-aquariums

Pun intended.

I'm just getting into bouldering / top roping and need to start my gear hunt. What do you recommend? What things do you stay away from? Right now I'm just climbing indoors with no real plans to go outdoors yet.

I tried looking around a bit but couldn't find anyone that was interested in this. For me it had been on my radar for years through various forums, but I only built my first watercooled PC in 2020. For that I designed and manufactured my own case and now I am working on a second one! It's become a fun hobby that's taught me CAD and more about manufacturing in general.

So I was curious if anyone else is into the same thing here? It's probably a bit more niche than the mechanical keyboard thread I saw!

This is my first post so please let me know if I'm doing anything incorrectly! I'm not very clear on how tags work... Apologies.

I'm curious if there are many tattoo enthusiasts around. I love both talking about and looking at tattoos. I have found that more visual-focused places like Instagram or even Reddit don't really allow much conversation on the nuances of the industry, its artists, artistry, criticisms, and so on.

I am a heavily tattooed woman, which is both a blessing and a curse. A blessing because I'm happy in my own body. A curse because being fetishized makes me uncomfortable.

I both love and hate tattoos entering more into the mainstream. As that as happened, artistry has come leaps and bounds alongside it.

Anyone have any deep thoughts on tattoos and modern tattoo culture?

(This is my first tildes thread please be gentle)

Hello, saw in another thread there was one person interested in boring hobbies of what we're up to so, brace yourselves! This is going to be a thread of me talking to my greenhouse plastic walls about literally watching grass grow, waiting for paint to dry and putting a puzzle together.

Would love to hear about your gardening and home inside/outside/building/demolishing/decorating efforts!

Maybe a sort of memorial thread for plants that died under our care. RIP little dudes.

I love to skydive even though I'm relatively new. It's given me lots of motivation to lose weight and the community so far is great! As a trans woman in the US South who jumps in the South, I've found them to be incredibly accepting and welcoming, and there's nowhere I'd rather be than hanging out at the drop zone on a pretty day!

Anyone else like to skydive?

I'm a US citizen living in Berlin, and I'm currently back in the US (Northeast Ohio specifically) for a family wedding. We've got a lot of extra room in our suitcases, so I want to bring stuff back that's hard(er) to get ahold of in Germany. I figured this is a good place to ask for any recommendations from others who live in Europe or have experience traveling!

As an example, here are some of the common recs I've seen in threads on r/germany:

• bulk OTC meds like aspirin and tylenol (not hard to find in Germany but cheaper in the US)
• brown sugar
• double-acting baking powder
• Frank's red hot sauce (maybe other hot sauce as well, Germans are not a spicy people)
• Ranch dressing (I've heard the powdered kind is better bc it's easier to pack?)
• Adobo seasoning (probably other Latin American ingredients too but this one specifically is a must-buy even for my white ass)
• specific brands of candies & junk food not available in Germany (though ime this category is the easiest to find at US-themed international stores, albeit at high prices)
• Levi's jeans for some reason (I don't really get this one tbh but I always see Germans saying it in threads)

I know for sure I'll get home and immediately regret not having purchased something. Anyone with experience traveling between these two continents, please let me know if you think of something missing from this list!

Ok, so the "Going on a trip and have zero idea what to do as a non-tourist..." isn't entirely true like it was in my post about NYC last year, but everyone was extremely helpful and threw out suggestions I wouldn't have even thought about looking for. So here I am again to bug you wonderful people for Tildes Travel Guide 2: Electric Denver Boogaloo

Same as before, staying for a week, I do have a rental car this time (trying to decide between the comfort of a Lexus or sportiness of an Alfa Romeo, damn car guy indecisiveness) so transport is less of an issue, anything that you'd suggest to see/do?

I've recently been trying to get an area of my yard to grow with perennial wild flowers. For 2 years straight, I plant seeds and nothing comes up. I'm starting to think that the seeds the store sells are just a scam. Even when I tried to germinate them in potting soil, nothing grew. Anyone here have any sort of advice?

Anyone metal detect or coin roll hunt? Or magnet fish?

I do both, ive coin roll hunted for a year, and I just started metal detecting a month ago

I'm in canada, which has pros and cons for metal detecting, a con would be all our modern coins are made of plated steel, so they both sound bad when you swing over them, and the rot beyond use in not that long time

A pro though is we have 1 and 2 dollar coins, in the states you might go a year before swinging over a Sacajawea dollar, but in canada you might find multiple loonies on the first time out

In a bit over a month, of metal detecting I found 2 sterling rings, a silver dime(it was a fresh drop not ancient) and a sterling earring, the earring was gold plated, I was hoping I found gold till I saw the 925 and makers mark, looked on the makers website and it was all gold plated sterling

Coin roll hunting I recently hit the jackpot of the year most definitly, four whole rolls of silver dimes, thats $380 and only cost me $20 to aquire

I am in Scotland for a little vacation with a friend, and am looking for recs! We are mainly in Edinburgh, but have a car and are open to just about anything! I don't really mess with touristy stuff, but am willing to try if you think its worthwhile! Also will be here for the rest of the week! We are planning on going to the gardens for sure, but other than that don't really have a whole lot planned. I would like to go to Galloway at night and see the milky way though. I love the scenery so I don't mind a short drive. Thanks :)

I’m going to be in Washington, D.C. for the next week (give or take a day). I’ll be staying in Arlington, VA and plan on utilizing public transportation while I’m there.

Any unconventional recommendations or things I should know?

I must preface by saying that no form of tobacco is safe for consumption, and no reasonable person should use tobacco for any reason other than maybe in religious ceremonies. I just happen to be an unreasonable person.

I took a bunch of my stuff that was stored in my mother's house this week, among them some snuff tobacco in a good state of conservation. I like the smell and the ritual. I went by a tobacco shop and bought two additional tiny containers of snuff -- mint, and cinnamon. It was very cheap. I enjoy using it throughout the day.

A lot of people snort it like cocaine, but that is not the way to do it. You should simply press your thumb into the snuff (which will get some of it on the thumb), block one nostril with said thumb, and then gently breathe with the other nostril. It has a high that is similar to smoking, but milder and more gradual. I find it very pleasant.

You shouldn't ever use tobacco. But, if you have used snuff tobacco, I would like to know how was your experience.

I'm spending 5 days in NYC starting next week. While I've traveled plenty, it's almost always been alone, frequently short term (2-3 days including flights in and out), and work related so I had people to either ask for suggestions or just went out on my own. If the trip didn't fit into the above categories it was typically to somewhere I'm relatively familiar with or had a lot of lead time to prepare my trip.

That is not the case right now. I've never had any interest in NYC so I don't have a list of places I'd like to experience in my head, I don't have a ton of time to research a plan and filter out all the "top 10 things to do in NYC" websites, I'll be with my wife so going off wandering on my own isn't an option, and this will be the first trip where I don't have a rental car to just go get lost in and see where my randomness takes me. I'm also not the tourist type so there's no interest in "the tree" or Times Square, etc.

So I beseech you fellow Tilderinos, as someone that doesn't care about being a tourist, doesn't have a social media presence to feed I'm-here-and-you're-not selfies to, and needs actual destinations to go to due to a lack of independent mobility, what should someone with pretty much 72 hours of completely free time in NYC actually do?

Collections can be made of anything. Some items have no purpose other than being part of the collection itself, something to look at and feel warm inside, while others are more functional or enjoyable by themselves.

Some collectors are moved by a desire for completion, some by nostalgia, or historical preservation. There are also those who accumulate objects which they believe will grow in value.

People collect books, movies, posters, magazines, rocks, cars, tools, swords, sand, tshirts, game cartridges, music CDs, videogame consoles, dolls, action figures, computers, letters, stamps, coins, digital files of all kinds, and knives. Anything that you cherish having in great numbers can be a collection.

So what do you collect, and why?

As I spent some time recently clearing out my closet, I looked longingly at my keyboard that I purchased with the intent of learning and practicing while working from home, as well to my ant farm kit where I had unsuccessfully kept a queen and small colony for a few months until they died several years ago. I'm sure we all have these tokens of failed experiments or forays into hobbies that once seemed interesting but we ended up losing interest in.

What are yours? Why were you initially interested in it and why did you stop?

Title. I am interested in buying a kit model engine to assemble and run.

• I am fine with anything from a single cylinder to a V8.
• It has to be a kit.
• It needs to run on a fuel (I want an actual, running engine)
• It should not be made in China (would strongly prefer US/Europe/Japan).

Are there any particular companies or stores I should look at?

Hey all. I just bought my first mountain bike. I don't know much about mountain biking but when I've taken a hybrid out onto logging trails it's been super fun so I'm sure I'll enjoy it. I have a few questions before I head out into the mountains:

1. What kind of mountain-biking specific gear do I need?
2. Where should I go as a beginner? Ideally somewhere with not too many hikers or other cyclists. I have plenty of stamina from my regular uphill cycling routine, but I don't want to get into intense steep riding and jumps right now.

I recently bought a keyboard and am going to dedicate 30 minutes a day to practicing piano. My goal is to be able to play my favorite songs (jazz & indie mainly), improvise, and generally be competent.

I also want to learn how to sightread, so I've been using https://sightreading.training which has been really useful! I have a background in music (guitar, mostly) and know music theory as well.

Unfortunately due to COVID, Delta, etc, I am not really interested in in-person lessons at the moment, so I was wondering if any tilde users had advice about learning to play through resources online or books!

I'm also really interested in any tips that anyone may have!