I somehow have money I need to spend, more than I ever had, and where else to put them than where I spend most of my awake time. So for the first time ever I've decided to splurge on a PC that isn't a low to medium budget one. For reference, I'm currently on a 10 year old 1070 GPU with a 1080p screen and the rest of my PC is either also 10 years old or at least 5 years old so it truly is time to upgrade.

It looks like it's 10-15% more expensive to self-build nowadays so what I'm about to pull the trigger on is a package/prebuilt deal. But I can still pick and choose (some) parts from this store. Here's the specs at the moment:

• GPU: ASUS Radeon RX 9070 XT Prime OC - 16GB GDDR6 RAM

This seems to be the most reasonable buy. The price is about 70% of Nvidia's equivalent in performance while the next stepup, a 5080, is more like 240% as expensive. I however got recommendations to get at least 5080 for good framerates in 4k gaming on high settings. I am currently on 144hz and have gotten used to about 100fps in most games, so ending up with like 50fps would suck.

• CPU: AMD Ryzen 7 9800X3D

Something I play a lot is WoW, and that is apparently a very CPU heavy game, so this one seems the best choice in terms of performance in that particular game even though I'm reading it's somewhat overkill for most other stuff.

• RAM: Corsair Vengeance DDR5-6000 - 32GB

I practically never multitask so getting only 16GB would have been fine I believe, and opened some room in my budget, however this is a limitation of the package deal and I cannot go lower than 32GB. Besides, this should be futureproof.

• Motherboard: ASUS TUF GAMING B650

• Storage: Kingston NV3 SSD - 1TB

• Case: DUTZO C740 Airflow Wood

• PSU: Corsair RMe Series RM850e (2025) - 850 Watt

Here's a link to the full specs and options to configure.

So.. is 4k a bad idea with this setup? Because I really want to.

I would probably settle for 1440p (widescreen even?) but I'm sure 4k would feel like such a much more massive upgrade. So if this build is not capable of 4k for newer modern highly demanding games, would downscaling in them look disappointing? If anyone has experience with that?

If I end up on 1440p, if anyone has experience with this part, what do movies and such look like? Would a 1080p download look strange and blurry being upscaled? And would a 2160p download look weird being downscaled?

I have also seen some posts about 4k being not worth it on account of just how tightly packed the pixels are - that unless it's a more than 30" screen, it's not even worth it? Any truth to that in you guys' experiences?

Sorry for the long post, but thanks for reading!

I managed to put a scratch into the d-pad on my steam deck and the replacement process looks more involved than I care for (gotta go through everything in the back to get to it). It's fairly shallow, about 1mm x 5mm, but right on the down button so it can be pretty tactilely distracting.

So I was thinking I may be able to 'refinish' it in some manner to get back a smooth, consistent feeling, but wasn't sure what I'd be able to use to achieve it. Any tips? I'm not too big on how most silicone button caps feel, but maybe I'll try one if it can adhere on the top and not try to fully cover it? Most seem to be going for some aesthetic though, which is also tactilely distracting.

Worst case scenario, maybe I use it as an excuse to replace the ABXY buttons too, they feel a bit loose and their friction when they slide against the edge instead of straight down is also a bad tactile sensation, so replacement button recommendations are also appreciated :)

SOLVED! I tried the suggestion from @mat first, which involved using acetone if it was ABS, and it was. I used several q tips, a cotton pad, and nail polish remover. Steps:

1. Clean area
2. With q tip lightly dampened with nail polish remover, swipe away from the middle of the d-pad, along the scratch, towards the edge.
3. Dry off/wipe down with cotton pad
4. Repeat until smooth!

It feels smooth to the touch and it even looks a bit better!

My knowledge here is about a decade out of date so I would like to ask for some advice and recommendations. I am looking less for a specific model to buy and more for personal experiences and general tips on what to look at or good review sites or knowledge bases.

Ideally I'd want a general purpose midsized flat monitor with higher refresh rate.
Mostly what I find are either gamer branded items usually without chain linking or data interface or office ones with 60hz though I'll work around of what is available. The image quality is the important part.

What price ranges and display technologies should I be looking at to get a generally good image without too many compromises?

Both sw and hw.

SW is usually hard to use, offering no meaningful settings or making them hard to get to with meaningful QoL features simply absent. Search in any kind of mainstream product is an absolutely excellent example.

If someone does need something other than the default workflow or encounters any error then that is too bad for them.

For a lot of hw products there is little to no meaningful choice alongside absent repair options. The best example is probably smartphones which are excessively thin bricks with a charging port, camera bump, sealed in battery and hard to impossible to change os.

Features decreasing longevity and contributing to waste(plug in for global warming) are simply accepted and even welcomed by end users for bizzare reasons.

For now there are still workarounds depending on how much effort you want to expend with that effort sometimes being truly excessive.

If you have a flash drive, SSD drive (including NVMe drives), (micro)SD card, or some other popular flash memory media die on you, you might be able to get a free replacement, depending on the manufacturer and the product.

I recently RMA'd a SanDisk microsd card that died unexpectedly. When I looked up their warranty, SanDisk has a lifetime warranty on most of their flash memory products. They even provided a return shipping label. Since they no longer make the card that died, they're sending an upgraded, currently available model.

I've also RMA'd two Kingston NVMe drives. Both of them were getting a bit old, but the RMA was accepted, and in these instances I also received the newer version of the product. I did have to pay for return shipping myself, but it was well worth it.

So if you're about to toss that broken flash media in the trash, double check to see if a warranty applies. It's worth the time and potential shipping cost/hassles in many cases.

I'm looking for a kit that will give me some practice holding wires in place and soldering connections, hopefully also while giving me a completed object or set of objects that's fun at the end. I'm not completely new to soldering; I've done a couple simple kits and some repair of model trains with loose wires, but I definitely could be a lot better at it and I'd like some guided practice. Emphasis on the "guided," I'm not looking for additional things to repair, I really want a straightforward kit, a range of difficulties in connections would also be great. Any recommendations?

Lately I’ve been experimenting with different desktop monitor setups, primarily for productivity-focused work as a systems engineer (coding, writing docs, Slack, email, terminals, etc.). Over the past few years, I’ve rotated through:
• 3× 24” 1080p monitors
• 2× 24” 1080p monitors + laptop display
• 1× 32” 4K monitor + laptop display
• 1× 32” 4K monitor
• Laptop display only (on a stand)

Surprisingly, I’ve found that I feel the most focused and productive when I use only my laptop display and rely on Alt-Tab to switch between apps.

With larger monitors or multiple displays I start to feel scattered. It almost turns into sensory overload, and my focus drops off.

Has anyone else experienced this? Do you find that larger or multiple monitors decrease your productivity? What setup works best for you?

I have probably a 1/4 of a roll of filament that slid off a roll when I swapped it between a Bambu reusable spool holder. It's been on my floor for a couple months and I have not found any way of getting this back onto a spool, either by trial and error or by finding a good resource online.

All the videos I see are people with tangles on spools, and this would be nice if I was in this situation but I am not.

Any time I try to do this it's just so challenging to get any sort of rhythm or easy process with our ruining the entire thing.

Any advice?