This is a recurring post to discuss programming or other technical projects that we've been working on. Tell us about one of your recent projects, either at work or personal projects. What's interesting about it? Are you having trouble with anything?

Long ago, Cree leader Captain Swan visited the Athabasca area. In 1715, he described a scene to Hudson’s Bay Company fur trader James Knight: “... there is a Certain Gum or pitch that runs down the river in such abundance that [Indians] cannot land but at certain places.” This was the first written reference to bitumen in Canada. Bitumen forms when organic matter is buried and subjected to heat and pressure over geological timescales. That organic matter was primarily algae and plants, which had sequestered carbon dioxide (CO₂) from the atmosphere by photosynthesis, thereby locking CO₂ in place, significantly reducing atmospheric CO₂ levels, and helping sustain all aerobic life.

In 1859, John Tyndall explained how atmospheric gases absorb heat from the sun as infrared radiation. His paper details an early understanding of the greenhouse effect. Scientists have long since linked CO₂ emissions—burning refined bitumen and coal—to changing Earth’s climate. A 1912 Popular Mechanics article states, “The furnaces of the world are now burning about 2 billion tons of coal a year. When this is burned, uniting with oxygen, it adds about 7 billion tons of carbon dioxide to the atmosphere yearly. This tends to make the air a more effective blanket for the earth and raise its temperature.” A century on, we’re burning 500% more fossil fuels.

Wishful thoughts will not prevent Earth’s global average temperature from increasing as we combust fossil fuels back into atmospheric CO₂. And while our generation reaps the rewards of inexpensive energy, our grandchildren will face the consequences of repaying this debt. A debt undermining the ancient Haudenosaunee philosophy that today’s decisions should result in a sustainable world seven generations from now.

Building a better world for our children requires energy—yet doing so by burning fossil fuels to the point of climate destabilization twists irony into generational betrayal far removed from sustainability.

In a 2013 experiment, University of Berkeley researchers found that breathing in a CO₂ concentration of 1,000 parts per million (ppm) indoors causes a measurable decline in intellectual capacity; at 2,500 ppm, initiative and strategic thinking declined to a dysfunctional level, which has since been corroborated by other researchers, including a 2023 meta-analysis on the short-term exposure to indoor CO₂ levels versus cognitive task performance. These cognitive effects become particularly concerning when viewed against atmospheric trends. On June 2, 2025, atmospheric CO₂ surpassed 429 ppm, a significant increase from the 318 ppm measured at Mauna Loa on June 15, 1959.

https://i.ibb.co/yFcXJqCy/graph.png

The graph illustrates a troubling acceleration in CO₂ emissions. At the current growth rate of 3.8 ppm per year, atmospheric CO₂ could reach 1,000 ppm in six generations (150 years). A 2021 study published in Nature emphasized the urgent need for action, stating that global oil and gas production must decline by 3% annually until 2050. Moreover, to limit warming to 1.5 °C above pre-industrial levels (1850–1900), an additional 25% of oil reserves must remain untouched.

Against this backdrop, political leaders advocate for increased fossil fuel extraction. Danielle Smith wants to unlock Alberta’s “$14 trillion in oil wealth” to “benefit millions of Canadians for generations.”

Short-term economic benefits derived from resource exploitation have repeatedly led to gradual, often unheeded, environmental degradation. This pattern repeatedly culminated in ecological and economic crashes, devastating the very communities who initially profited. Notable cases include Mesopotamian salinization, the Classic Maya collapse, the Ancestral Puebloan collapse, Norse Greenland settlements, Easter Island’s deforestation, the Dust Bowl, the Aral Sea’s desiccation, and the Grand Banks cod collapse. While some nations have sustainably managed resource wealth, the immediate economic pressures and political incentives that drive extraction often overshadow long-term planning.

The question is not: “How many Canadian generations will benefit?”

The question is: “How many generations will suffer, globally?”

Will we learn from history? Will we set an example for the next seven generations?

Or will we build more oil and gas pipelines, condemning our descendants to an unsustainable future?

Hereby released into the public domain. Feel free to adapt, correct, and send to representatives.

Tildes is a very serious site, where we discuss very serious matters like forums, stardew valley and whatever. Tags culled from the highest voted topics from the last seven days, if anyone was boggled of the mind.

But one of my favourite tags happens to be offbeat! Taking its original inspiration from Sir Nils Olav III, this thread is looking for any far-fetched offbeat stories lurking in the newspapers. It may not deserve its own post, but it deserves a wider audience!

What have you been watching and reading this week? You don't need to give us a whole essay if you don't want to, but please write something! Feel free to talk about something you saw that was cool, something that was bad, ask for recommendations, or anything else you can think of.

If you want to, feel free to find the thing you're talking about and link to its pages on Anilist, MAL, or any other database you use!

I don't have a lot to say myself, yet. I signed up for the beta mostly because people talk so positively of what Digg was like in the past. I never experienced that, as Digg was already on it's way out when I discovered it.

I'd love to hear from those who remember the golden age of Digg, as well as those just curious about the reboot themselves... What are you thoughts, expectations, hopes and concerns?

Have you watched any TV shows recently you want to discuss? Any shows you want to recommend or are hyped about? Feel free to discuss anything here.

Please just try to provide fair warning of spoilers if you can.

Note: This is NOT a sponsored post. I'm just a happy customer.

Background

When the G'AIM'E Kickstarter was announced, I got the itch to play light gun games again. I grew up playing Time Crisis on my PSX, stepping on a controller plugged into port 2 which acted as a makeshift pedal so I could mimic the arcade experience. A local pizza place near me had an Area 51 machine that I could play for a quarter, and over time I memorized the enemy layouts for that game so that I could play further and further on one coin.

There are a variety of modern light gun models available now, though all of them are at the hobbyist/tinkerer level. There isn't one that "just works" smoothly and easily.

The most well known is the Sinden, which achieves calibration on games by setting up a white border around the game on the screen. This allows the gun to establish its position within that border and "know" where it's shooting.

Unfortunately, when I looked into the Sinden, it seemed like reviews were very mixed, with many mentioning that the border can be kind of a mess to get working. Apparently it can require a lot of legwork and messing around with settings and external programs and whatnot.

After searching around for alternatives, I landed upon a different line of modern light gun and decided to, well, pull the trigger.

Gun4IR Intro

Gun4IR on its own isn't a standalone product so much as it is a framework for making a modern light gun. You can buy the individual components and put them all together in a gun casing, making a functional light gun of your choosing. For example, see the User Guide which goes into detail about which boards you'll need, pin guides, etc. People have made them in Nerf cases and 3D printed ones.

Now, if I'm going to ding the Sinden for requiring too much tinkering, surely soldering wires onto PCBs is a step in the wrong direction?

That's absolutely correct! The good news is that you can sidestep all of this. Gun4IR has some official pre-build sellers, meaning you can buy an already made gun -- no soldering needed! Their site sells builds for the UK, while, RPEG Electronics is their official pre-build seller for the US.

From RPEG, I picked up a pre-built Gun4IR setup in a Guncon 2 housing.

Gun4IR Basics

As is implied by the name, Gun4IR uses 4 different IR clusters for calibration. You can buy a pack of LED sensors that plug into the USB port of your TV. You stick these, facing out, to the midpoint of the top, bottom, left, and right of your TV. The LEDs are black and their light can't be seen with the naked eye but can with a camera (you can check to make sure they're working with your phone).

The gun comes with calibration software that gives you lines on your TV to show the mount points for the LEDs, check how the gun is seeing the sensors, line up shots, etc.

I'm happy to report that, once calibrated, my gun is VERY accurate. I was honestly expecting a bit of jank, but it's genuinely spot on. There's a small bit of jitter that's noticeable when you have a crosshair on (some of that also might be coming from my unstable hands), but when you're playing a game without a crosshair, it's not enough to make you miss shots. The shots I've missed have been because I'm, well, bad at videogames.

Games

Because I wasn't wanting to tinker, I found a big download pack that promised me a pre-configured set of ROMs and emulators that were turnkey and compatible with Gun4IR. I spent days downloading all the individual parts from one of those sketchy download sites, getting all the parts of a multi-part RAR file.

And when I started extracting it, wouldn't you know, it was INFESTED with viruses. I uploaded one of the .exes to VirusTotal and I've never seen so much red.

Shame on me, though. I'm not an internet newbie, and I should know better than to trust random executable files, especially on Windows.

So, I went seeking an alternate solution.

Batocera

Batocera is a Linux distribution focused on retro-gaming. You wouldn't use it as your daily driver, but you would use it if you want to just boot into something so you can play games. Additionally, Batocera has built-in light gun support! Perfect!

I did my usual "setup emulation" dance that I've done so many times before: looking up worthwhile games to play, locating ripping ROMs, getting the right extracting BIOSes, etc. I also bought an external hard drive and attached it to my Windows TVPC. I can now boot off the hard drive to go into Batocera directly (because I didn't want to try to figure out dual booting with Windows).

Batocera is like booting into an arcade cabinet, loading right into ES-DE. It doesn't really expose its file system to you by default, but it's got a killer feature that makes setup easy: Batocera automatically sets up a network share for you. This lets you access all of its folders from another device, meaning I could set everything up on my laptop and transfer it over easily to Batocera.

Furthermore, Batocera automatically knows when you've got a light gun attached and will show a gun icon on games that are compatible. In theory, I'm able to navigate the interface just using my light gun, but in practice I also paired a bluetooth controller. (See Caveats section below for more on this.)

You don't HAVE to use Batocera of course, but it ended up being so easy that it became my preferred setup.

Gaming

So, I got the gun calibrated, and I got my games set up in Batocera. It's time to shoot!

I'm happy to report that the gun works fantastically. Like, seriously good.

For most games and emulators, it "just works" which is exactly what I wanted. I tested out several different games on several different platforms, and it worked on stuff ranging from the Atari 2600 to Naomi arcade cabinets.

I played through the first 10 rounds of Duck Hunt on the NES without missing a shot before getting bored and moving to something else. Time Crisis on the PlayStation (my original light gun love) plays wonderfully.

I had a friend over this weekend who also loves light gun games and has nostalgia for TC (though his is for TC2 and TC3). We traded off rounds playing Time Crisis 2 (which ended up being a good way to do it, as I forgot how my arms and eyes need a rest after 15 minutes of light gun gaming). We beat the full campaign in 2 and almost beat 3.

I also tried the gun out in some Windows games off of Steam, just to make sure that my Batocera success wasn't a fluke. Sure enough, it worked just fine!

I now have an accurate, easy-to-use light gun setup that works on my large, modern LCD TV. I have hours of light gun gameplay ahead of me, and I'm thrilled.

Caveats

Wow, kfwyre, this sounds great! I can't wait to get one for myself!

Easy there, cowboy/cowgirl/cowthem! Let me surface some of the rough edges, lest you think that this is too good to be true.

Conclusion

I am quite fond of my Gun4IR so far. It works better than I hoped it would, and it's unlocked a type of gaming that I thought was extinct. (For some reason, light gun games have a different feel to me than VR shooting gallery games. Maybe it's just nostalgia, but I like them a lot more?)

I would recommend it ONLY if you're someone who knows they're going to get their money's worth out of it and are also willing to put up with the mostly minimal tinkering required to get it working. I say mostly minimal because, no matter what gun you're using, you're still going to have to set up emulators and ROMs and whatnot. The configuration that is specific to Gun4IR is really just installing the sensors, using the calibration app, and making sure your gun isn't catching other LEDs.

Compared to the G'AIM'E (which is a bit of a fool's errand at this point because that one's still theoretical while this one's here to kiss you in real life), Gun4IR doesn't offer the "plug and play" promise, but it also is compatible with far more games. If you're in the market for the G'AIM'E, however, it's probably worth waiting out that release to see how it fares (and whether people can get it working with more games besides the included ones).

On the other hand, if you're like me and need some light gun fun NOW then I give the Gun4IR a pretty strong recommendation, with a secondary recommendation for Batocera. The two of them together are really great, and I'm delighted that I have hours upon hours of shooting games ahead of me.

If anyone has any additional questions or wants me to test specific games/systems, let me know. I'm happy to report back and help in whatever way I can.

As part of a weekly series, these topics are a place for users to casually discuss the things they did — or didn't do — during their week. Did you accomplish any goals? Suffer a failure? Do nothing at all? Tell us about it!

What have you been doing lately for your own fitness? Try out any new programs or exercises? Have any questions for others about your training? Want to vent about poor behavior in the gym? Started a new diet or have a new recipe you want to share? Anything else health and wellness related?

My last dashcam was a total dud and wasn't even operational for 6 hours. I'm hoping to get some community recommendations on reliable units with good image quality. If you would also share the approx. length of time you've had/used it that would be a huge help as well. Thanks in advance!