Just had a chat with friends about the possibility and how it would likely be introduced.

Paraphrased into the following;

2.99$/Month
OEM installs have a 2 year license
Upgrades are free for the first year (from 11 to the new)
Comes with Office 365 and AI functionality to soften the blow

What are your thoughts on this?

In the last year I've made significant progress in my relationship with food. A massive part of it was simply cutting down calories and a little more exercise. And so far it's been pretty good. I'm down around 13kg(30lb), I'm fitting in a lot of my older cloths and issues like back pain and sleep apnea are getting back in line.

But for a while I've hit a plateau and it's feeling like a bit of a regression. Looks like the big blocker is my sugar consumption. I can stave off the craving for most of the day, but at 2.30pm on the dot I can't help but reach for chocolate, soda or an ice cream. And then I keep reaching for them till the end of the day. It's been getting worse lately and that slipping feeling really sucks.

I've tried cold turkey, fruits, alternatives, gum and a few other strategies but they all never stick.

I'm curious if anyone else has managed to make the cut and if there's any tips and tricks that helped keep you consistent. It's one thing to clear out the house, but the stuff seems to be at arms reach at all times. And there's always the weird blackout time between "I should not eat that" and "why the hell did I eat that".

Have you watched any TV shows recently you want to discuss? Any shows you want to recommend or are hyped about? Feel free to discuss anything here.

Please just try to provide fair warning of spoilers if you can.

Week 4 has begun!

This is the last full week of the Backlog Burner. There are only ten days left in May!

Post your current bingo cards.
Continue updating us on your games!

If you did not participate in previous weeks but want to start this week, that's fine!
Reminder: playing bingo is OPTIONAL.

Quick links:

• Backlog Bingo Site
• Week 1 Discussion and Event Guidelines
• Week 2 Discussion
• Week 3 Discussion

Week 3 Recap

8 participants moved 16 games out of their backlogs!
There were 0 bingo wins (but we are SO close!).

• 2 participants played free choice
• 4 participants played standard bingo cards
• 2 participants played bingo golf

One participant played a game they had been putting off for 14 years!

Thus far, a total of 49 games have been played for the May 2024 Backlog Burner.

Week 3 Game List:

• BattleBit Remastered
• Bendy and the Dark Revival
• The Deadly Tower of Monsters
• Death Must Die
• Frogger
• Frostpunk
• Jak and Daxter: The Precursor Legacy via OpenGOAL
• LoveChoice
• a new life.
• One Lonely Outpost
• Paratopic
• Quake
• Returnal
• Slime-san
• StarCraft II
• Super Lucky's Tale

Have you watched any movies recently you want to discuss? Any films you want to recommend or are hyped about? Feel free to discuss anything here.

Please just try to provide fair warning of spoilers if you can.

I saw a video by Throttle House with this premise and thought it was a fun one. What three cars or trucks would you want in your budget garage?

Let's assume that you can only buy vehicles legal in your country, but that there are no costs for importing. For instance, it might be illegal to import or drive a car with the steering on the opposite side as normal, so that's out. But you can import a legal car for no additional cost. Prices are today's prices, but if your prices are not in US$ then don't feel obligated to be exact down to the dollar/euro/CHF since exchange rates fluctuate. And to keep things easy, there is no VAT/sales tax.

If you'd prefer to spec out a wishlist for a country you'd like to live in (like Japan or Germany) you may do that instead, but same import rules apply. :)

Have you watched any TV shows recently you want to discuss? Any shows you want to recommend or are hyped about? Feel free to discuss anything here.

Please just try to provide fair warning of spoilers if you can.

tl;dr: 3D printing won't change your life but it will make your life 1% better in unexpected ways.

Last year, I spent a year-long work trip with someone who was very into 3D printing. To be frank, I initially had zero interest in it. From what I understood of 3D printing, it was expensive, required mechanical experience, coding knowledge, and ultimately not worth what you put into it.

Fortunately, my colleague didn't care what I thought about his hobby and bought a cheap printer to keep himself occupied during downtime at work. Originally, it was just something that occasionally made noise in the background. As the days went on, however, more and more doodads began to appear around the office. A cable organizer here, a desk decoration there; nothing earth-shattering.

The thing that really changed my mind, funny enough, was a simple powder scooper. During our trip, we shared a terribly designed creatine bottle with a narrow neck and no scooper. We spent months pouring out white powder by eyesight alone like amateur crackheads and I will never buy this bottle again. My colleague printed out a scooper with a long neck and the problem went away.

That was the key turnaround that changed my mindset - I had a problem; we printed a solution.

I got back from my trip and decided to try it out myself. After some serious deliberation on how committed I was to this, I purchased the Bambu P1S. It’s not the cheapest option for someone just starting and I chose a Bambu printer because a Youtuber argued that your best way to have fun as a beginner was to pick a printer that “just worked.” It was a compelling enough reason for me to shell $900. (no, I’m not sponsored, just telling my story.)

Some of my favorite prints:

• Long Scooper: the one that started it all for me. This scooper saved us a ridiculous amount of time and effort for what it is. It also gets to the heart of what 3D printing is to me - solving your individual problems with simple solutions.

• Pill Organizer: it’s got a lever that spins a wheel around, opening a different chamber for each day of the week. This one really opened my eyes to what is mechanically possible with just basic PLA plastic. People much smarter than me figured out ways to print devices with hinges, springs, and levers all without needing a single extra tool.

• Scour Pad Holder: This is the one that made most people around me go, “huh, that’s pretty neat.” You’re right, it is. No one likes touching a moist scour pad.

• Slide Wallet: I spent $74 on a SECRID cardslide wallet. While I don’t regret that purchase - I used it faithfully for four years ongoing - I did feel a bit foolish when I realized I could 3D print the same mechanism for $1.50.

That’s not to say anything about the decorative / gifting aspect of 3D printing either. I 3D printed a giant Charizard for my friend’s son the size of his head in eight hours.

That said, there is a mechanical learning curve to even the most user-friendly printers. With the Bambu series, I’d say that if you’ve ever built IKEA furniture or a 100+ piece Lego, assembly is pretty straightforward. It’s the troubleshooting that will get you. Even with basic filament and simple projects, I still encountered the nozzle clogging, filament stuck in the pipes, and bed adhesion problems.

This is a hobby that requires you to be willing to experiment and look up solutions. From what I understand, some printer brands are tougher than others so the learning curve will vary depending on your gear. I quickly learned that there’s numerous ways your print will mess up and your project will look like what the community calls the “spaghetti monster.” Unless you’re a born tinkerer, this is probably the most frustrating part of the process. However, accumulating knowledge to diagnose and solve the problem is very rewarding. I learned that the third slot on a Bambu machine is statistically more likely to jam and 0.5 kg spools are more likely to clog than 1.0 kg ones. Turns out that a lithophane needs to be printed vertically and only looks good with a white filament.

Overall, I enjoyed my time with my 3D printer and I don’t regret my purchase at all. It’s a hobby that provides near-instant gratification - you find the thing you want to print - or design it yourself - and boom, it’s sitting on your printer in a couple of hours. While I’m just taking files from the community and printing the .stl file, the skill ceiling is also very high once you add hardware to your projects (e.g. screws, ball bearings, Raspberry Pi). I’m going to continue to learn and I’m excited about where I can take this machine.

Some questions for the community:

1. If you have a 3D printer, how deep in the rabbit hole are you? Are you making your own CAD files?
2. What’s your favorite print? If you don’t own a printer, what’s a cool 3D print that stands out in your mind?
3. What’s a problem in your life where you think you could 3D print a solution?

This thread is posted weekly - please try to post all relevant Israel-Hamas war content in here, such as news, updates, opinion articles, etc. Extremely significant events may warrant a separate topic, but almost all should be posted in here.

Please try to avoid antagonistic arguments and bickering matches. Comment threads that devolve into unproductive arguments may be removed so that the overall topic is able to continue.

Here's the IMDb page: https://www.imdb.com/title/tt17279496/

A journey across a dystopian future America, following a team of military-embedded journalists as they race against time to reach DC before rebel factions descend upon the White House.

This is a recurring post to discuss programming or other technical projects that we've been working on. Tell us about one of your recent projects, either at work or personal projects. What's interesting about it? Are you having trouble with anything?