Both sw and hw.

SW is usually hard to use, offering no meaningful settings or making them hard to get to with meaningful QoL features simply absent. Search in any kind of mainstream product is an absolutely excellent example.

If someone does need something other than the default workflow or encounters any error then that is too bad for them.

For a lot of hw products there is little to no meaningful choice alongside absent repair options. The best example is probably smartphones which are excessively thin bricks with a charging port, camera bump, sealed in battery and hard to impossible to change os.

Features decreasing longevity and contributing to waste(plug in for global warming) are simply accepted and even welcomed by end users for bizzare reasons.

For now there are still workarounds depending on how much effort you want to expend with that effort sometimes being truly excessive.

I have found myself confused about glue stick on the heat bed. I always have some applied, either reusing some from a previous print or applying it fresh. I manage a small print shop and have seen many prints fail, even on nice textured PEI plates, because no glue was used. I’ve seen prints fail only where there was no glue under the part many times. Yet I frequently hear from people, face to face, that they never glue. I’ve seen these people’s prints fail because they don’t use glue.

There are even special plates you can buy (SuperTack plates) that stick extra well to PLA to absolve you of the need for glue. But I find these coating on these plates to be too fragile.

Overall it seems like there’s a large contingency of people risking their prints and purchasing accessories to save what is maybe 20 seconds per print (that’s including periodic cleaning as you can reuse the glue many times). How do Tildes people feel about this? I teach a 3D printing class and tell people to always glue as they have nothing to lose. But maybe I’m missing something.

If you have a flash drive, SSD drive (including NVMe drives), (micro)SD card, or some other popular flash memory media die on you, you might be able to get a free replacement, depending on the manufacturer and the product.

I recently RMA'd a SanDisk microsd card that died unexpectedly. When I looked up their warranty, SanDisk has a lifetime warranty on most of their flash memory products. They even provided a return shipping label. Since they no longer make the card that died, they're sending an upgraded, currently available model.

I've also RMA'd two Kingston NVMe drives. Both of them were getting a bit old, but the RMA was accepted, and in these instances I also received the newer version of the product. I did have to pay for return shipping myself, but it was well worth it.

So if you're about to toss that broken flash media in the trash, double check to see if a warranty applies. It's worth the time and potential shipping cost/hassles in many cases.

I'm looking for a kit that will give me some practice holding wires in place and soldering connections, hopefully also while giving me a completed object or set of objects that's fun at the end. I'm not completely new to soldering; I've done a couple simple kits and some repair of model trains with loose wires, but I definitely could be a lot better at it and I'd like some guided practice. Emphasis on the "guided," I'm not looking for additional things to repair, I really want a straightforward kit, a range of difficulties in connections would also be great. Any recommendations?

Lately I’ve been experimenting with different desktop monitor setups, primarily for productivity-focused work as a systems engineer (coding, writing docs, Slack, email, terminals, etc.). Over the past few years, I’ve rotated through:
• 3× 24” 1080p monitors
• 2× 24” 1080p monitors + laptop display
• 1× 32” 4K monitor + laptop display
• 1× 32” 4K monitor
• Laptop display only (on a stand)

Surprisingly, I’ve found that I feel the most focused and productive when I use only my laptop display and rely on Alt-Tab to switch between apps.

With larger monitors or multiple displays I start to feel scattered. It almost turns into sensory overload, and my focus drops off.

Has anyone else experienced this? Do you find that larger or multiple monitors decrease your productivity? What setup works best for you?

I have probably a 1/4 of a roll of filament that slid off a roll when I swapped it between a Bambu reusable spool holder. It's been on my floor for a couple months and I have not found any way of getting this back onto a spool, either by trial and error or by finding a good resource online.

All the videos I see are people with tangles on spools, and this would be nice if I was in this situation but I am not.

Any time I try to do this it's just so challenging to get any sort of rhythm or easy process with our ruining the entire thing.

Any advice?

Does anyone here use a tablet for note taking?

I've always used pen and paper for note taking when working or in/around the house. At one point when phones got bigger I did try moving to notes apps but they never clicked. Something about the glossy screen and the levels of fuss to take a note just didn't work.

I recently found out that there's e-ink tablets which try to emulate real note taking, like the Supernote which runs a custom firmware to make note taking as easy as possible. Or the Boox which is Android based, so it has way more apps, but it's got amazing reviews.

There's quite a lot, I'm curious if anyone here has actually used anything like this and what their thoughts are?
Looking at reviews, I'm drawn to the Supernote. But I'd love to hear some real use cases!

I'm frankly all out of ideas on how to solve an issue, so I'm hoping that the Tildes community might have a suggestion for solving this issue.

I have an 8tb HDD that spins up and is recognized by windows when plugged into a USB HDD dock, but in another machine (also running windows 10) the drive can't be seen (**this is using data connections directly to the motherboard).

There is:

• Nothing mechanically wrong with the drive as it reads/writes on the HDD dock.
• I've tested the drive as an NTFS formatted drive and as unallocated.
• Neither Disk Manager nor the bios sees the drive.
• Multiple SATA cables and Power jacks tested on working drives and the non working drive.

Open to thoughts, prayers or possible solutions.

Thank you!

I'm up for both a new phone and a new laptop, I have an Iphone 8 and a Macbook pro (2020) that was a freebie from an old job.

I wanted a new Iphone, but if I did that, only a Macbook can put music on it and that's half what I use my phone for. I don't really need a new laptop, but all of my other devices are Linux and can't put music on an Iphone. So seems like it's either all or nothing here. Either I switch to Android, or I go buy two expensive Apple products soon.

Iphones have always been great to me, the only reason I need a new phone right now is because Apple refuses to support mine any more. The Macbook though, I had that for only a year before the logic board gave out and bricked it. Is that just something that happens with Macbooks? Are all Apple products actually trash and I've just gotten lucky with both Iphone 4s and Iphone 8 being built for war?

Am I dumb for avoiding Android like the plague? Every Android phone I've ever met is loaded with tons of bloatware and insecure as hell, seems like the Windows of the phone world.

My G502s are starting to exhibit the dreaded double-click problem. Now they're old -- I think one is around 10yrs old, the other 6-7yrs old -- so I've gotten solid use out of both. And G502s are cheap enough these days (like US$35 on Amazon) that it'd be inexpensive to replace them with new G502s.

But I'm still annoyed that this is happening. Plus, this isn't my first time having problems with Logitech gaming peripherals. I've had issues with my G305 wireless mouse (dongle stopped working), and I will never buy Logitech gaming keyboards again since replacement keycaps can't be purchased; gotta buy a whole new keyboard. So yeah, trying to avoid Logitech if possible.

Anyway, I like the G502 because it has multiple buttons, particularly the main thumb button (G6), which I use for PTT on Discord/Teamspeak. I then use the other two thumb buttons (G4/G5) as forward/back in browsers or game bindings (along with G7/G8).

Any good alternatives? Let's say ≤US$80. Preference is wired, but non-BT wireless is fine, too. If wireless, ideally it'd AA/AAA batteries so I can quickly swap rechargeable batteries. Lastly, I'm right-handed.

TIA!

so I need computer speakers that

• are less than 6 inch high
• either the left or right speaker has controls that allow me to
  • increase or decrease the volume
  • have 3.5 mm headphone port [optional]
  • button to power on/off [optional]
• wired, either via 3.5 mm headphone jack or USB-C cable

I've tried looking for it but I am having a damn hard time trying to find something that fits all these.

My keyboard is breathing its last, and my mouse probably isn't far behind, so I plan to replace them. I have a K70 (cherry MX) and some expensive light-up mouse.

When I bought these ~10 years ago, it seemed a truth universally acknowledged that a person who used their desktop computer "seriously" for, oh, video games, must be in want of wired peripherals—and never wireless. Supposedly wireless latency was unbearable and device batteries died quickly.

Is this still true? (Was it ever?)

If not, I'd like to try a wireless mouse and keyboard. Cable management is a hassle. My AirPods have been excellent and I don't miss the tangles of old, so I imagine I wouldn't miss these either.

My computer is a workstation which I use for documents, spreadsheets, and video conferencing. Even as a relatively fast typer, I can't imagine wireless latency would exceed the speed between keystrokes. I occasionally play co-op video games games with friends, but nothing intense.

Is there some other drawback I'm missing?