I'm running out of time to finish the spend requirements on a credit card promotion. I was planning on buying a VR headset, but I realized there was something that would actually be much more useful; a new router.

The market for consumer routers has been really strange; We are on the sixth generation, yet it's super common for consumer routers to be two or three generations behind, especially the less expensive ones. So much of the stuff on the market only goes up to 802.11n, and half of the time the firmware they include is halfway broken or is missing important features.

So I'm looking for a router that is relatively future-proof. I want Wifi 6. I want something that won't be interrupted by the microwave. Open source firmware would be excellent, but not a requirement. I don't need mesh networking; my house is not that big. I do want it to be relatively inexpensive; I'd consider $300 to be a hard limit unless someone has a persuasive arguement to justify the cost.

I would also prefer to avoid Netgear. I have no idea how they stay in business with the mountains of problems I have had with their products and their horrible support. The last time I owned a Netgear product, I was forced to give them my email address to download the driver and they illegally added it to their marketing mailing list without my permission. I don't do business with people who betray me.

Grandma is understimulated in assisted living, and while Mom is looking into ways to either bunk with her, or drag her back to our place, I'm exploring other options. Her apartment does have wireless internet, so we could set up some sort of telepresence or video calling device, but even something as simple as a Relay or a KC2 isn't great, because it loses power, and needs to be explained to her.

I'm thinking that we might have better luck with a Tablet or a PC solution, and I do have a Kindle Fire (5th Gen?) and an off brand Windows 10 tablet around, and I am open to a Pi Project or speciality devices, but it has to be simple enough to plug and play, and the dream would be if it could start a video chat without the receiver having to pick up, or at least as simple as a nurse being able to come in and start a call. Any suggestions?

For the past few years I haven't had any speakers connected to my PC due to a lack of space in my room and on my desk. For the most part I have been using a pair of headphones which are great, but they aren't the most comfortable thing when I just want to watch YouTube on my second monitor and keep my ears available for my significant other.

So now I am looking for alternatives to desktop speakers. Right now I am either thinking of:

• Bone Conduction Headphones

• Bose Soundwear

I think the bone conduction headphones would give me a ton of options to use while I am biking and sitting at my desk. The Bose on the other hand have excellent sound quality. A small, discrete speaker bar may also fit my needs if there are any good ones that can be recommended. Any thoughts? Have I missed an audio product that may fit my needs that you could recommend?

I read a lot (my wife gets mad at me because I read so much faster than her), and these days I do most of my reading on Kindle. Fortunately there are ways to do this for little or no money. If you're interested here are some ways to get more ebooks without spending a lot of money:

1. Project Gutenberg is the grandparent of free book sites, with 60K+ public domain works.
2. MobileRead has an entire forum for fresh uploads of public domain works in Kindle format (they have other formats too).
3. The Libby app (iOS/Android) makes it trivially easy to borrow ebooks from your local library.
4. The Hoopla app (iOS/Android) is another way to borrow from your local library.
5. The Library Extension browser add-on (Chrome/Firefox) will alert you when a book that you're looking at online (say, on an Amazon product page) is available at your local library. (This covers print as well as ebooks)
6. BookBub will send you a daily email with books that are currently on sale at the major ebook stores.
7. I'm not sure how I got into this one; I think it was when I registered a new Kindle for Christmas. But in any case, Amazon is currently in the mode of offering me a $1 ebook credit on every order I have shipped, as long as I'm willing to take non-prime shipping and wait a few days. As far as I can tell this option is available on every Prime order, so I shamelessly take advantage. Need a $4 USB-C cable to replace one that's fraying? Hey, I can get it a few days later and add $1 to my credits. Until they stop this, I'll keep breaking every order up into individual single-item orders. It's not even worse for the planet, because their warehouse software recombines everything into as few boxes as it can anyhow.

I'm thinking about getting a new printer. My needs are basically to print out textual documents 2-3 times per month from macOS. I don't need to print photos. I will not buy an inkjet because of the outrageous price of the ink. I would like to have fax support (my spouse sees a lot of doctors and they still use fax machines a lot, and we're not comfortable sending personal medical info via a fax service on the web), and it would be nice if we could also scan documents. So I'm thinking a multi-function device.

We currently have a Brother 7840W MFC with print, fax, copy, and scan. It's over 10 years old (maybe 15?) and I dislike it. It's been slowly losing functionality over the past 5+ years. The WiFi went out, but I was able to connect it via wired ethernet to a computer and share it from there. The drivers insist that there's a paper jam, but there isn't and it prints just fine (but sounds like some of the internal mechanical components are going to die any day now.) The UI of the printer is awful. I recall having to use the phone pad to enter my WiFi password, and it was like texting on a Motorola StarTAC. (Like if you want the letter "C" press the number "2" three times, etc.) The drivers and related software don't work like normal macOS software. (Disclosure: I also once wrote a scanner driver for Brother and it was horrible, but they shipped it, so I'm not real comfortable putting their software on my computer. But that was 25 years ago, so maybe they're better now?)

I've heard horrible things about the drivers and software of most other major printer makers - HP, Epson, Lexmark, etc. I'm guessing what I'm looking for doesn't exist, but I just want a multi-function device in as small a package as is reasonable, and with a UI on the device and software that doesn't suck and that won't die on me in < 5 years. Does such a thing exist?

Apologies if this belongs in ~tech, that group is more on topic than ~talk but I think it’s for news and links more than open questions. (Edit: Looks like it's been moved to ~comp, I guess that works too.)

I’m looking for an HDMI switch. It needs to support at least 4K resolution and have at least 10 input ports. It also needs to have Toslink audio out. Remote control support is a “nice to have” but physical buttons are fine too.

I’m having trouble locating a product like this online. Not sure if I’m just using the wrong terms or if it doesn’t actually exist. Can any Tildes gearheads give me a pointer here?

EDIT: Since a few people now have not realized how old this topic is before making a comment, see above date ↑. :)

My old PC's CPU (i7 930) started to critically fail after 8+ years of being overclocked from 2.8 to 4.0 GHz, so I decided to build a new one based on the Ultra-Compact Mini-ITX Gaming PC Build from TechBuyersGuru.

I went with Mini-ITX this time since my old PC was in a huge Antec P193 tower which weighs 16.4kg (36.2lbs) before components and so was a giant PITA to move around. The new Sugo SG13 case is roughly 1/7th the volume and initial weight so is much more convenient to move (but not build!).

p.s. I was unsure whether to post this 'buildapc' style content in ~tech or ~comp.... thoughts?

PCPartPicker Part List
^{Parts labeled incompatible are not... see "Notes" below in Build Process section.}
Salvaged from old PC:
GPU   -     $0 - EVGA - GeForce GTX 980 Ti 6GB Superclocked ACX 2.0+ Video Card
SSD   -     $0 - Samsung - 850 Pro Series 1TB 2.5" Solid State Drive
SSD   -     $0 - Samsung - 840 Pro Series 256GB 2.5" Solid State Drive
HDD   -     $0 - Hitachi - Deskstar NAS 4TB 3.5" 7200RPM Internal Hard Drive

New Components:
Case -   $72 - Silverstone - Sugo SG13B-Q Mini ITX Tower Case
Mobo - $190 - Gigabyte - Z370N WIFI Mini ITX LGA1151 Motherboard
CPU   - $325 - Intel - Core i5-8600K 3.6GHz 6-Core Processor
Cool - $114 - Silverstone - NT06-PRO 74.0 CFM Sleeve Bearing CPU Cooler
RAM   - $220 - Corsair - Vengeance LPX 16GB (2 x 8GB) DDR4-3000 Memory
PSU   - $175 - Silverstone - 600W 80+ Gold Certified Fully-Modular SFX Power Supply
M.2   - $143 - Crucial - MX500 500GB M.2-2280 Solid State Drive
M.2   - $143 - Crucial - MX500 500GB M.2-2280 Solid State Drive

Total:  $1382 (CAD)

Build Process w/ Pictures:

TL;DR - Behold my new Battlestation, IN ALL HER GLORY!!!

After saying goodbye to my old, heavy, oversized, Antec P193 case...
Unboxing the new one, which is almost the same volume as my UPS!...
And prepping all the new PC components for a photo op...
I began the arduous process assembling my new computer.

Everything went fairly smoothly to start. I installed the RAM, M.2 Drives, CPU and CPU Cooler before mounting the motherboard to the case, as instructed in the build guide. The CPU Cooler was a PITA to attach but that's no surprise as they always are.

Note: These "incompatible" parts listed on PCPartsPicker actually do fit together as the build guide said they would. However the RAM and CPU cooler fan are actually touching and I barely managed to squeeze them in together, so the build guide probably isn't lying when it said that particular low-profile RAM might be the only one that actually works with the cooler.

I then mounted the motherboard to the case and began slowly plugging everything else in. This was a particularly slow and frustrating process as I have pretty large hands and everything was incredibly tiny, in incredibly cramped positions, and required more finesse to get in place than I could muster with my fingers alone. As a result I wound up using long needle-nose pliers, including some bent-angle ones, to get most everything plugged in.

This is when I ran into my first major problem though... and one that was not mentioned in the build guide at all. The Case's front panel USB cable wouldn't fit in the motherboard with the CPU cooler fan in place. After trying fruitlessly to get the cable plugged in for 30min I finally gave up and decided to solve the issue the old fashioned way and it plugged in just fine afterwards. (Thanks for saving my ass yet again, Mr. Dremel!)

The other potential issue was due to the CPU cooler and case mounted PSU, which aren't supposed to work together, but once again as the build guide suggested they actually do... with a whopping 3mm clearance between them! At this point I also decided to swap out some of the ribbon power cables that came with the new PSU for some spare braided ones I had from another build since they are much nicer looking and allow for better airflow.

Note: The other supposed incompatibility listed on PCPartPicker is due to the fact that the case only officially supports 3x 2.5" drives or 1x 3.5" with 1x 2.5" but that's easy enough to get around, as explained below.

I also decided to cram an extra SSD under the front case fan, secured with double sided tape to the properly mounted SSD on the case floor panel. It worked just fine and allowed me to get my 3.5" 4TB HDD properly mounted on the underside of the top plate. Linus Tech Tips, in his similar Sugo SG13 build, even managed to squeeze 2 more SSDs above the PSU using double sided tape as well, so I guess that even leaves me with some room to expand my storage later. ;)

The rest of the build assembly process went relatively smoothly and once everything was hooked up, in position and plugged in, it booted straight into windows 10 (which was still on my old 1TB SSD). The moment when a new PC build gets past the POST is always a huge relief, however that momentary relief soon turned to dread as I quickly noticed a pretty big problem; The machine couldn't detect one of my new M.2 SATA drives.

After several hours of frustrated tinkering and much googling I finally found out the reason why, cursing PCPartPicker for not warning me and face-palming pretty hard for not having read the motherboard specs more carefully. It turns out that the Z370N motherboard actually only supports 1x M.2 SATA drive and the second M.2 slot is NVMe only. I had apparently just wasted $140+ on an M.2 SATA drive I couldn't use and my plans to configure them both in RAID 0 was shattered. But that's honestly not the worst part... in order to get the useless M.2 drive back out I had to basically FULLY DISASSEMBLE my entire build again since the NVMe M.2 slot is located on the bottom of the motherboard!

Despite the serious temptation to just leave it in there even though I couldn't use it, I wound up going through with the disassembly purely because I had a pretty good idea for how to actually make use of that second M.2 SATA drive based on something I saw on Linus Tech Tips a few months ago. So rather than leaving it in there or even returning it, after ordering myself the necessary enclosure I now have myself a pretty nice DIY 500GB Thumb drive. ;)

So several hours later after completely taking apart my new build, removing the bottom mounted M.2 SATA drive, and fully reassembling my build once again, I booted it up, it got past the POST and into Windows 10 again. I then reactivated Win 10 on the new hardware configuration (which was surprisingly painless compared to how it used to be where you needed to actually phone Microsoft) and then began the process of installing Linux Mint on the M.2 SATA drive I still had remaining.

Conclusion:
After several days of going at it now, I am finally done and my new computer is fully assembled, functional and ready to use. As always with building computers it was a bit scary, a bit painful, and more than a bit frustrating but ultimately well worth it. I couldn't be happier with the results and can't wait to overclock this bad boy when I get the chance!