I miss photography subreddits. I don’t miss Reddit as a whole at all though, and I think smaller forums like Tildes and a couple Discord servers have helped bridge the gap in a lot of other areas. But I just have not found a good replacement for r/analog in seeing other hobbyists’ film photography and share my own. Where should I be looking?

The growing season here in southeastern Australia is just kicking off, so I'd love to hear (and see!) your successes and failures, what you will repeat and what you want to change, what your future plans are, etc.

Inspired by this comment and a need to burn off some steam during dead time in my day, I figured i'd spin off and ask what everyone else likes writing with.

I have atrocious handwriting, but have found i'm more likely to take notes if I actually enjoy what i'm writing with, and then by extension I started looking at smaller pens so I wouldn't mind carrying them on me at all times. After diving down the rabbit hole a bit over the years I've got-

Fountain Pens:

Lamy Vista-
The first one I dived into. Everyone recommended the safari, and the vista looked cooler, so I went with that. It eventually got broken, but I thought it was a great starting point. I haven't gotten any more though simply because I don't love that they use a different cartridge than the vast majority of pens, and didn't want to bother with converters.

TWSBI Eco-
My first piston fountain pen and still one of the best. I love the look, I love how it writes, I love that it's cheap so if I do screwup (like say put it through the wash 4 times over the years.....) it's not a bank breaking expense.

Kaweco liliput in fireblue -
This was my treat for not losing/breaking the Eco for a few years, and because i've got a sling I carry with me and wanted something nice to write with that fit with a notebook (there's a wallet I use for that). Much more expensive than a normal liliput but it's gorgeous and I love it.
NOTE: I linked to the nibsmith because I do think it's the only spot you should buy this pen from. They let you choose some extra options for the nib at the bottom, and for no extra charge, they'll do a "tune & smooth" pass which I've noticed helps with this pens one flaw of sometimes struggling to get it started. Not the end of the world if you're buying it for the normal $55 price and need something small, but extra unacceptable at the price point of the fancier versions.

Other Pens:

Bullet Space Pen -
I've got one in black and one in brass. They fit in the same compartment as the liliput for when I don't want to be using a fancier pen, and of course write very well, in basically any condition, and are extremely cheap for the hobby at $36.

Contrail pocket pen-
Silly expensive, but this one clips onto my wallet, which also has a notebook in it, and thus has become the pen I use the most. Writes well (and since it's a ball point you can easily change the cartridge to whatever you want), looks nice, and is quick to get open so I can take spur of the moment notes. I can use the Liliput/Bullet as well with my setup, but the liliput's screw cap is a little slow/unwieldy for those scenarios, and the bullet clip kept falling off in my pocket.

Stuff I've had my eye on:

Honestly i've found a lot of fountain/fancy pens are quite over the top/large, when I really prefer a more sleek/small look. Still one of these days i'll probably get a Vanishing point fountain pen, because I do think that's really cool, but I haven't seen too much else that's really caught my eye.

That's it for my modest collection. I'm curious to see what others have.

I already play piano and guitar to some degree but never got to learn what I really wanted to play which was blues music.

I see ads here and there about “learn to play following this app!” and was wondering if people had any experiences or recommendations for app-based learning?

I've had an interest in 3D printing since first hearing about it many years ago, but at the time printers were expensive and learning materials and resources were scarce. Nowadays, it seems like 3D printing is as common as regular old 2D printing but I feel left in the dust.

What's really making me want to get started now is I've collected a lot of junk over the years that I've told myself I could repair, but a lot of the repairs would be much easier with a 3D printer and custom modeled parts. Dearest to me would be an old watch that my grandfather gave to me before he died. The part of the watch that connects the strap to the case (lugs, I think it's called?) has broken off and gotten lost, and it's a proprietary part with no replacement parts available. I'd love to just 3D-print a solution but have no idea how to get started.

I consider myself a creative person, I have plenty of experience with Photoshop and illustrator, but I have never once dabbled in 3D modeling software like Blender or AutoCAD. The closest I ever got was peering over the shoulder of an artist who was working on a video game character model in Zbrush, or maybe working on custom Half-Life maps in Valve Hammer. So I'm looking for the most basic, easy-to-follow set of instructions to get me from zero knowledge to successfully printing bespoke DIY repair parts at my local makerspace.

Would also love to have this be a discussion on 3D printing in general. How did you get started? How have the tools and techniques evolved over the years? What do you think are the next big things coming in the hobby? What are things you wish you knew when you started but only learned after mistakes were made? Share your thoughts and anecdotes, I'd be happy to read them.

I've been climbing for about 2 years now and yesterday I was finally able to complete my most difficult route yet without stopping for a break! I've tried this 6C about 15 times or so and only finished it twice, but I usually fall or have to stop to rest in the middle, so I was really pleased I did it in one!

What about you guys?

(P.s apologies if this is the wrong place for this. At first I was going to post in ~sport but that looked more like pro sport news)

Good morning everyone,

Long time reader, first time poster here. I'm a reddit refugee. The subreddit I miss the most is r/throwers.

Anyone else into yoyoing or similar hobbies? I've been yoyoing for about 15 years and have a collection of over 100 yoyos. I own a lot of YoYoFactory, probably because I was first getting into the hobby around 2008-2012 when they were super dominant and popular.

I'm also a big fan of plastic yoyos. I find myself throwing my Recess First Base more than anything else.

Hello ~hobbies, I've come to you in hopes of getting some guidance as a newbie.

I have never owned a camera before and am afraid of choosing the wrong one for my use case, so I was hoping some people could enlighten me, if not with model suggestions, then with what I should be looking for.

My main goal is to shoot video, not take photos (though of course I want it to take good photos but the primary use will be shooting videos wherever I go). And specifically 4k 60fps video. I have a 65 inch TV where I want to play these videos so that resolution is a must, as any picture quality flaws will be noticed.

I have a gimbal, a hohem iSteady MT2, which I use with my phone and would like to use with the camera, so whatever camera I get can't go above its 1.2kg payload limit. I really don't want to pay for a separate gimbal for the camera.

I plan on using a separate mic, probably the sennheiser mke 200 based on reviews I saw, so the camera must also be able to support external mics.

And lastly, the budget is roughly 1000€.

There are so many brands and models I really don't know where exactly to turn to. I've mostly been leaning towards cameras like the Sony ZV-E10L and similar as they seem geared towards vloggers and that's more or less the type of video I'll be making (not content creation though, these are just personal videos), but I'm wondering if I'm falling into a trap as the price is so much lower than say an A7 III.

Any advice, pointers, or recommendations would be greatly appreciated as I really don't know much about the world of cameras. I'm frankly not even sure what type of camera (DSLR, point and shoot, etc.) I should even be looking at so yeah.

Hi everyone,

So I'm thinking (haven't actually decided yet) about getting into CNC machining in a very hobbyist, fun-to-learn sort of way sometime in the next year. I'm trying to use this as an opportunity for some discussion around the current state of entry-level hobbyist CNC's. I have wanted to have a small CNC and the ability to use it for small parts for more than 5 years now. I think learning CAM would be very challenging but useful also. I wanted to ask if anyone is aware of any desktop CNC's that are priced reasonably (ideally in the $3,000 or less range) that are somewhat similar to Prusa. In being similar to Prusa, I mean built with good quality parts but also with a sizable community for support and the ability to repair it yourself for long-term use. I would only really be machining wood & aluminum, although if small and very simple steel parts could be occasionally machined at a slow feed rate that would be freakin' awesome.

So with all of that said, what is my background and experience?

• Not an engineer, biology/healthcare background. But am generally good with computers and technology. No programming experience at all.
• Have been 3D printing for about 5 years
• Comfortable with modeling in Fusion 360
• Do not have a workshop of tools. No table saw, no drill press, no lathe, etc. Just 3D printers and some handheld power tools. I have no desire to have a workshop with large tools like that, either.
• Generally only make small functional parts. The ability to CNC small aluminum parts to add significant strength to larger 3D printed parts would be useful. Also, would be useful to copy small aluminum/steel parts of things that break around the house like, for example, a small metal part in my washer that broke off recently.
• I also do not have a laser cutter, and am open to input that that might be the better thing to get before a small CNC.

Thanks for any feedback!

Hello, everyone!

I've been back into it for a little over a year. I started at an art camp when I was roughly 12 or so. I had someone I saw doing it show me a couple things and I still to this day remember every model he taught me. Unfortunately it didn't advance much further than that for another 16 years or so, but here we are.

There are so many communities out there for it, but I never seem to find one that's terribly active that isn't Reddit. I've found a discord that has some interesting challenges and prompts to stir up some discussions, except they usually are just individual answers. Hopefully I can drum something up here.

Currently I have two projects in the works that I still need to get myself to finish. I'm roughly "half-way" through Satoshi's Bahamut and working on a Saku B Monster Hunter Saltas Queen model that is nearly finished.(Just needs shaped)

So far my proudest is LQD's modular phoenix. (https://imgur.com/a/L527otB) It took me roughly 6 or 7 hours to make and put together, I think. I actually ended up having to fold 3 wings as I forgot to reverse the instructions to make the other. >.>

As part of the ongoing quest to turn everything I enjoy into an exercise in statistical modelling, I had a look around today for a way to track what books I've read and which ones I may be interested in. I found a bit of a jumble of things in various states of development, half of which are owned by Amazon (which I'd prefer to avoid) and the other half with incomplete, confusing, and opaquely sourced data.

I use this kind of service for a handful of other topics, mainly untappd, AniList, and last.fm. I'm only really interested in the ability to keep track of read/watched items - I don't find myself rating things or making complex lists unless I started my journey with a hobby by using one of these systems. Of course for this to work out, it needs to have a fairly comprehensive library. I was unfortunately disappointed with OpenLibrary, which would otherwise be my top pick. I found systems like readarr and calibre a little clunky for this in the past since they're so focused on file management, but I'm open to retrying them.

Does anyone here have any insights in this space? Not just limited to books, I'm also interested in trackers for TV/Movies. Preferably not owned by a massive company like Amazon, I know a lot of people were disappointed when they deprecated the Goodreads API.

I've got an indoor stephanotis which got an infestation of mealybugs (bad soil I think). I gave it a spray of Safer 5118-6 insecticidal soap (49.something% potassium salts of fatty acids) and have been going around (and around and around) the plant with an alcohol soaked pad to pick them off. It's a pretty thick mess of vines, and after several days of hunting I've found a lot, but of course it needs to be zero. It's had a problem with scale as well in the past, but this seems to be pretty minor right now. I've encountered just 2-3 leaves with that, and alcohol-wiped them too.

So my question is, is this insecticidal soap the most suitable thing to use (it does specify it targets mealybugs) or is there something better? I plan to give it a good saturation in a couple more days, really try to hit every spot.

You might be able to tell by my username which is my favorite audio drama. If you haven't heard of it, Wolf 359 is a space opera dramedy focused on a cast of deeply likable characters who find themselves carrying out mysterious research onboard a space station owned by a soulless corporation. Heads up, the whole thing is very enjoyable but the creators say the real story doesn't get going for real until about episode 9 and I would agree. It's funny and entertaining but gets pretty serious around there. Don't worry, the early episodes are super short and still good.

Other audio dramas I highly recommend are:

Bronzetown
1865
Limetown
Edict Zero FIS
Station 151
Archive 81
The Magnus Archives
Theater of Tomorrow
The Hyacinth Disaster
Life After / The Message

My upholstery hobby is a fulfilling and creative outlet that allows me to revive old furniture and give it a fresh, stylish look. My favorite fabric to use is velvet. Its luxurious texture and rich colors add a touch of elegance and sophistication to any piece. Velvet not only looks stunning but also feels incredibly soft and comfortable

Hello,

I have had the Sony ZV-1 for a while, and i was wondering if anyone had any experience with it - namely video stabilization.

I feel like even with Active SteadyShot turned on in the settings, the footage is relatively shaky, and I like to think I have a relatively stable hand. Would using a gimbal of some sorts eliminate most of the shakiness of the footage without having to apply the in-camera stabilization?

Hey all!

(If this is the wrong place for this, please feel free to reassign)

During the winter months I can't get out to do much photography, but I love darkroom printing. Last winter I started buying antique photo negatives on ebay to have something to print.

It's been amazing! Many are from the 20's, 30's and 40's, with one set (of glass plates) having been manufactured pre-20th century!

I don't know how many I have, but it must be somewhere around 300-500 negatives. Currently they are stored in their original envelopes from the labs that developed them nearly 90 years ago, but that's not a good long term option. I love history, and I want to do this right, but I feel a bit overwhelmed with the volume.

Data I'd like to keep track of:

• The name of the person on the envelope the negative came from
• The date on the envelope
• The approximate date taken (if known)
• Ideally the specific envelope it came from

I'm going to try and store these in a binder of some sort, though that presents it's own challenges since it won't be possible to find sheets with sleeves that are the right size for the negatives. But that's a problem for me to solve haha. I've never had to index/catalog physical media before, so I'm pretty clueless on where to start.

More than anything it's really important to me to preserve this history in a safe way. For many of the people these pictures may be the only trace on earth that they ever existed, and I want to respect that.

I've been following tildes the past couple of weeks, and am really enjoying the friendlier, more thought out discussion, when compared to reddit. The one thing I miss is r/flying, which was a pretty decent community of pilots without too much low-effort content.

I'm curious if any other pilots have migrated here (hobby pilots, or professionals)? Are we anywhere near critical mass to support discussions around it?

To keep this valuable to the community at large, just a bit about flying as a hobby. At-least in the US, we still have one of the most active General Aviation communities in the world. It's a lot more expensive than it used to be, but for around $10k you can earn your Private Pilot rating. With that you can fly to nearly any airport, over nearly any area, see beautiful views, experience all sorts of weather and locations. At that point you're looking at ~$100-200/hr depending where in the US you're located, and what sort of club or rental you use.

It's expensive to be sure, but compared to what people manage to spend on boating, cars, even golfing, it can be fairly reasonable. And it's really a unique experience, if you love it there's nothing like it.

I want to get into growing chilis and I decides I want to get started with Jalapenos. I want to grow chilis but the problem is it's already the middle of Summer so if I plant now I can only harvest in fall/winter. Because of this I need to grow the indoors in pots. So my question toward my fellow chili growers:

How hard is it to grow Jalapenos in pots?

I can get my hands on 20L pots so that's not a problem, I can also get nitrogen and good soil (I found a recommendation to not get high quality one). One problem I faced is that I would need heat lamps to help the growing process. My guess is I can't go without them because in my country in late fall, winter, early spring it's pretty cold. How quickly do they grow and how tall they get? One concern I have is they will get to big to grow indoors since I don't have a ton of space inside. I have heard that there are kinds of chilis that stand the cold better (the ones with hair on them) so do you recommend me to get them? Or do you recommend me to wait till january? I'm really excited to start growing them and I'm a bit inpatient. Thanks for the advice in advance.

This topic allows no mention of means to obtain drugs or endorses the use of it. It only asks for people who have experiences they are willing to share.

I'm referring to recreational and/or illegal substances.

A year ago I bought a bunch of chili seeds that I planted and then kind of left to its own devices on my balcony together with 3 other types of chili pepper. I watered the plants but I didn't give them any other love.

Despite my negligence the plants thrived and some of the chili peppers developed a very particular appearance.
Perhaps 1 out of 10 fully grown peppers kind of resembled a flower with petals around its base. They aren't suppose to look like that.

https://i.imgur.com/Km2GFu3.jpg

I saved the seeds from the largest and most distinct "flower chilis" and planted them to see if the odd appearance of the peppers would come back in generation 2...and so far 5 out of 5 developed fruits have the same flower appearance. Some only have 2-3 "petals" around the base of the fruit but some have 5-6.

My four gen 2 plants have perhaps 60 more peppers in development (out of 100 flowers) and this year the gen 1 plant only have 2 out of 30 peppers that have the flower appearance.

I have only found one pic on the internets of the same base variety that have a hint of a "petal" but none that look like mine.

I know that new chili varieties aren't considered to be stable until gen 6-7 so I have more planting to do :) but which steps do I need to take to solidify the variety except replanting seeds and growing new generations?

The one thing that I personally really got into was mechanical keyboards. It all started with one cheap secondhand Corsair RGB mechanical gaming keyboard that I got when I was 15. I thought it was the coolest thing ever because it was shiny and loud. That led to many different keyboards and keyboard accessories. Notable ones include:

• GMMK Pro 70% keyboard with a metal chassis
• Anne Pro Bluetooth 60% keyboard
• A set of keycaps, which alone cost more than multiple non-fancy keyboards
• A couple of hand-soldered macropads that I never got around to using

... The list goes on. It was fun, but after buying the keycaps, I realized that, for the sake of my bank account and financial stability, I had probably acquired enough keyboards for the time being.

What is your costly and somewhat pointless hobby/obsession?

Hi Tildes!
I'm a college student considering adding a gas motor onto my existing bike. I'm in a pretty hilly city, so biking around for groceries is kinda annoying... plus I wanna just zoom around some trails in my free time.
Currently, I'm looking at one of the 49cc 4 stroke engine kits all over Amazon/Ebay, since I heard that 4 stroke motors are supposedly quieter and more reliable than 2 strokes. I don't care about speed... in fact, I don't want to be going over 30mph on a bike. 49cc also makes this thing street legal in my state.
I did consider doing an e-bike conversion as well, but those are much more expensive... a 4 stroke kit is ~$160, while any reputable e-bike battery alone is more than that. These things don't burn much gasoline either, getting 100-150 mpg! I'd have to ride thousands of miles before the fuel cost exceeds an e-bike battery.
So, any advice would be appreciated! Also, I'd be willing to spend ~300 on this if there is a compelling reason to get a better motor than the generic Ebay one. If you have motor suggestions, please link them!
Thanks,
purpuraRana

I've recently (around a year ago) taken up horse riding as a hobby.
Although, at this point it's crossing the boundary into sport, I still think there's plenty of hobby to discuss.

Have you ridden before? If so how long? If not what's stopping you?
Do you have horses or ponies? Please share!

I see some nice watches that I like, but 80-90% of them are the silver/stainless steel color. I'm not sure why that color is so prevalent (probably the same reason 40% of new cars are white), maybe a lot of people love it but its not for me.

Let's say I found a watch I really liked, but wanted the case/bezel/lugs (and of course the strap) to be black stainless steel. Is this something a jeweler or watch repair shop would be able to do?

I recently got this plate at a yard sale and was curious if anyone has any info on it
I did some reverse google image search and couldn’t find much on it.
I’m not sure if this is number 28 made out of so many or number 28 in a set.
If this is a set I’d like to track down the rest and collect them because look how cool it is!!
I also apologize if this isn’t the right place to post as I’m fairly new to tildes.

https://imgur.com/a/6eUt9We

I have wasps building hives under the eves on my house. I'm looking for a way to kill them without Raid or other harsh chemicals. Right now there seems to be about 10 hornets starting on this hive. I see a number of other places they've made hives around the house that were removed before we moved in. My current options that I've found so far are spraying with dawn soap/water/garden sprayer or peppermint. It seems a little too high to get a garbage bag around them easily before pissing them off. Any other good ideas?

Beginner amateur photographer here (emphasis on the amateur - zero desire to monetize my photos or start a business). Several months ago I bought a Sony A6000 after doing some research on cameras for beginners. The camera was fine but to completely honest I wasn't very enthused with the pictures coming out.

Then I bought a 50 mm prime lens, and what a difference! Compared to the kit lenses, my photos started coming out the way I envisioned them. They say you should never blame the gear and while I agree with the general sentiment, photography became a lot more fun after acquiring my nifty fifty.

My question to all the photographers out there is, what next? For context, I mostly enjoy shooting people from close distances (1-5 m) away. However, a lot of my shots are of groups of people doing sports-like activities so when there's more than two people I have trouble capturing it all with my current setup. Any recommendations are much appreciated!

Hoping this is the right group?

Inspired by coffee/cocktail threads, here’s one for my favorite consumable, cigars!

Here’re some potential questions to maybe inspire some discussion.

• What have you smoked recently that has surprised or impressed you?

• What’s a favorite cigar memory?

• What’re your stogie rituals?

• What’re some recent acquisitions and why did you purchase them?

• What’s your #1 cigar rec of all time? What’s your top rec from something new to you in the last year?

• How did you get into cigars and how long have you been smoking?

And anything else!

I’ve discussed cigars extensively in various online spaces and I’m very optimistic about the idea of tildes’ text-only and highly discoursive environment to provide some cool cigar content and a bit more than just photos of half smoked sticks (which I love too but get a lot of!).

I’ll hit on a few of my icebreaker questions at once. My most recent smoke was a Plasecnia Alma del Fuego Eduardo I which was absolutely fantastic. A lot of pepperiness throughout, with a lot of earthiness and meatiness. Quite full bodied, phenomenal smoke production and a very easy draw.

This stick was new to me but I am no stranger to Plasencia. I’ve been closely following their growth the last few years and the Alma Fuerte Salomon was my top stick of 2022.

I'm an avid cigar smoker and thought it might be a good hobby to pick up. Curious about a few of the aspects around doing it.

How long does it take to roll a single cigar? 10 cigars?
Is it that much cheaper?
How much difference is there in each blend? Is it hard to mimic cigars you already like?

Learn my love of flashlights from Reddit and got this deal. I'm not sponsored or shilling just like this flashlights and wanted to share the deal. (And cut my teeth on posting here.)

Sofirn flashlights are highly regarded in the flashlight community. I've gotten a few of their torches and I've never been disappointed. This is a pretty amazing deal which includes the 18650 Li-ion battery with built in C charging.

https://www.amazon.com/promocode/A1ULCAIBGHXI4S

Note that you have to clip the 20% off coupon on Amazon as well as use the promo for 30% off.

Any other flashlight fans here? What's your poison?

So me and my wife have temporarily moved in with my parents to save up for a down payment (boy houses are expensive right now). Their house is in a more rural part of Arizona and they have a tons of trails and fire roads that I'm looking at riding when it gets cooler. I have a Canyon Grizl AL 6 with 45mm tires and a rigid carbon fork. The tires are set up tubeless and have pretty good dry grip so I think I should be fine and I would be less than 5 miles from a car accessible road at all times. I have under biked a bit before but not on a desert trail. I was curious if any riders here have any experience and/or advice for taking a gravel bike on single track.

This is a good time to repeat the prompt made by @0d_billie back in 2020, and I will also reuse the questions in their post.

So are any tilderen martial artists? If so, tell me about it!

• What do you practice?
• How long have you done it?
• How does it benefit you?
• Do you attend classes or practice solo?
• Would you recommend your martial art to a beginner?

I'm curious to know what martial ars everyone likes the most, and why!

i've been climbing for a few years now, and am realising my mindset, patterns, etc need changing. on the other hand i want to continue to enjoy climbing as a hobby, and not treat it like a grueling workout/job/torture.

what do you do on the wall, off the wall, and outside of climbing itself (i.e. daily life) to help you improve?

Started way back in 2013, but due to injuries at work I took a break until beginning on this year. Finally found a friend to start back up at it with a local school in Vancouver. Love it.

I've done some Rapier and Smallsword, but focusing on Longsword right now. Entering my first tournament this Friday. Excited to get my butt kicked.

Anyone else practicing HEMA (Historical European Martial Arts)?

Our school is more focus on Fiore's teachings and Italian fencing, but from time to time we get other more experienced practitioners from other school to teach German, British, etc. Fighting styles.

Do you love a good trail? Are you a hiker, backpacker, trail runner, or neighborhood saunterer? If so, this conversation is for you! Share your favorite routes, dream trips, the gear you love, where you find inspiration, or essential advice. Got any cool trips planned, in the near or distant future? Whether you’re a newbie or trail-tested veteran, share what you know!

Hey guys!

I do traditional archery, make my own gear, and I love talking about it. If you're not an archer, please feel free to peruse the comments and ask questions if you have any! As for my questions for you:

• How did you get into it?
• What's your setup like?
• What are your archery-related goals and expectations for the year?

My first exposure to archery began as early as Zelda 1 for the NES. I instantly understood the value of being able to attack moblins and gohmas from afar. It was not until the pandemic some 30 years later that I picked up my old man's bow and fell in love with something that I feel I've been missing all of my life. My setup is a 50" cartel doosung epic zen korean bow that reaches 50# @ 32" max draw length with a modified cowhide and deerskin grip. I use only wooden arrows. I tend to draw my bow only to 28", however, which reaches 36#, and that's enough for now as I'm recovering from some shoulder pain. My goals this year are to recover, stay in form, and to make an educational video about arrows.

I’m building a house and will have ample opportunity to walk with the builder to specify outlets, cat 6, and coax runs and locations. What sorts of little things do you wish you had done in your house or would be useful?

I plan to run cat 6 from mostly every room (some in multiple locations) to the office where my servers will be. I will also be running a few runs of cat 6 out to the shop for future connectivity out there. Anything else that might be useful?