Anything goes topic-wise: serious or funny, major or minor, significant or inconsequential. The only criteria is that you think more people should know about or be aware of whatever it is you're choosing to share.

Also, explain why you think it's necessary or valuable to spread that knowledge/awareness.

We have about a million films showing vampires, zombies, werewolves, and ghosts.

But despite rich folklore traditions we see very few films about other creatures. There is a handful of films dealing with leprechauns, pixies, trolls, fairies, witches, goblins, gnomes, etc. And that's just the western traditions. We have huge range of unexplored creatures from around the world. If I had to sit through yet another vampire film I'd rather it was based on adze traditions than Bram Stoker reinventions.

Why are there so many films that tread the same ground about vampires, zombies, and ghosts, and so few films about everything else?

I apologize if this is a topic that has been covered before. I haven't really been able to find anything and I'm not really sure what a good search keyword is. But I noticed this as part of the Hearthstone player ban thread.

On a traditional bulletin board forum it's not really an issue because the conversations unfold chronologically anyway. When you have the atemporality of threaded comment chains that gets disorganized fast.

Basically, it's a "still developing" story where more events and news keep happening that's germane to the discussion. As the news comes up, people who already read the thread might not see the comments being posted about subsequent developments and be able to follow it because each piece of additional news or info. ends up happening in a comment/sub-thread that ends up arranged in fairly arbitrary, rather than chronological order.

The Democratic Debate threads have been similar, where the reactions and consequences of the topics being discussed can keep a discussion going for a long time, but it all happens in sub threads that people are unlikely to see. Many of these developments don't really merit a thread of their own, but after a few days or so it gets hard to actually have a big-picture discussion because the news has overtaken the scope of the discussion thread.

In a thread with an active OP, I've noticed what tends to happen is the OP will steadily edit new developments into the main post to update it. I think this has actually worked pretty well BUT edits don't bump posts as far as I can tell. Also, the people posting the updates aren't necessarily getting as much credit (in terms of votes, exemplary labels, or whatever) and, insofar as that matters to people that's a thing. Do you think this is adequate as things scale or would some novel design or subcomment system be needed?

A little over a year ago I created an unofficial matrix room for the tildes community. I believed at the time, and still do, that the infrastructure supporting the community should be founded on open, sustainable software, and matrix was an interesting new solution in this space similar to the Discords and Slacks of the world. Though the room is bridged with the IRC chat activity has remained relatively low compared to Discord.

Unfortunately I haven't had the time to properly moderate this channel. Though the community's involvement there has remained civil I do not think I'm active enough to ensure things stay that way.

As such I am looking for an interested person or persons to take over this channel over the next week or so and if no suitable replacements are found will be shutting the room down until further notice.

Thanks everyone,

Short link. Probably more to follow.

The Swedish Academy handed out two prizes this year, after they were forced to suspend the prize last year amid a metoo scandal which saw most of the Academy’s members either resign voluntarily or be forced to resign. There’s been a lot of speculation about how they were going to restore their reputation this year, and they spent a long portion of the press conference explaining their new process, whereas in past years they haven’t felt compelled to do so.

It was expected that at least one of the two prizes would go to a woman, with Margaret Atwood being one of the odds favorites (the bookmakers’ picks never win, so I don’t know whether we should put much stock in them, but they do reflect pre-award buzz). I’m not too familiar with either author, but it’s interesting that they chose Peter Handke. He’s one of Europe’s most controversial authors for his decades-long support of Serbia and Slobodan Milosevic’s actions during the Yugoslav Wars. He once compared Serbians to the Jews during WW2, visited Milosevic in prison when he was on trial for war crimes, and spoke at the man’s funeral. He’s also hailed as one of the greatest living German-language authors. It’s like the Academy decided to throw feminists a bone by awarding a woman the prize, but then couldn’t resist jumping headlong into controversy again right away.

I want to adopt these technologies b/c I'm moving to a home w/o WiFi: I'll only use mobile networks in order to save some money. But the general pipeline and setup are hard to digest, and I'm not sure if I really understand what are the implications for my privacy, except for the fact that DNS queries are encrypted so I don't leak domain names. This is especially important to me because Turkish internet law and the censorship mechanism is really intrusive, with DPI & DNS blocking. My current ISP does not fiddle with my HTTPS traffic, but I won't have that with my mobile network.

I'm also considering a VPN, but major VPNs are blocked here. To what extent do the purposes of VPNs and these DNS solutions overlap? Assuming most of my important traffic is over HTTPS+DoH/T, how safe am I, and most importantly how much can I penetrate the censorship mechanisms?

EDIT: Since a few people now have not realized how old this topic is before making a comment, see above date ↑. :)

My old PC's CPU (i7 930) started to critically fail after 8+ years of being overclocked from 2.8 to 4.0 GHz, so I decided to build a new one based on the Ultra-Compact Mini-ITX Gaming PC Build from TechBuyersGuru.

I went with Mini-ITX this time since my old PC was in a huge Antec P193 tower which weighs 16.4kg (36.2lbs) before components and so was a giant PITA to move around. The new Sugo SG13 case is roughly 1/7th the volume and initial weight so is much more convenient to move (but not build!).

p.s. I was unsure whether to post this 'buildapc' style content in ~tech or ~comp.... thoughts?

PCPartPicker Part List
^{Parts labeled incompatible are not... see "Notes" below in Build Process section.}
Salvaged from old PC:
GPU   -     $0 - EVGA - GeForce GTX 980 Ti 6GB Superclocked ACX 2.0+ Video Card
SSD   -     $0 - Samsung - 850 Pro Series 1TB 2.5" Solid State Drive
SSD   -     $0 - Samsung - 840 Pro Series 256GB 2.5" Solid State Drive
HDD   -     $0 - Hitachi - Deskstar NAS 4TB 3.5" 7200RPM Internal Hard Drive

New Components:
Case -   $72 - Silverstone - Sugo SG13B-Q Mini ITX Tower Case
Mobo - $190 - Gigabyte - Z370N WIFI Mini ITX LGA1151 Motherboard
CPU   - $325 - Intel - Core i5-8600K 3.6GHz 6-Core Processor
Cool - $114 - Silverstone - NT06-PRO 74.0 CFM Sleeve Bearing CPU Cooler
RAM   - $220 - Corsair - Vengeance LPX 16GB (2 x 8GB) DDR4-3000 Memory
PSU   - $175 - Silverstone - 600W 80+ Gold Certified Fully-Modular SFX Power Supply
M.2   - $143 - Crucial - MX500 500GB M.2-2280 Solid State Drive
M.2   - $143 - Crucial - MX500 500GB M.2-2280 Solid State Drive

Total:  $1382 (CAD)

Build Process w/ Pictures:

TL;DR - Behold my new Battlestation, IN ALL HER GLORY!!!

After saying goodbye to my old, heavy, oversized, Antec P193 case...
Unboxing the new one, which is almost the same volume as my UPS!...
And prepping all the new PC components for a photo op...
I began the arduous process assembling my new computer.

Everything went fairly smoothly to start. I installed the RAM, M.2 Drives, CPU and CPU Cooler before mounting the motherboard to the case, as instructed in the build guide. The CPU Cooler was a PITA to attach but that's no surprise as they always are.

Note: These "incompatible" parts listed on PCPartsPicker actually do fit together as the build guide said they would. However the RAM and CPU cooler fan are actually touching and I barely managed to squeeze them in together, so the build guide probably isn't lying when it said that particular low-profile RAM might be the only one that actually works with the cooler.

I then mounted the motherboard to the case and began slowly plugging everything else in. This was a particularly slow and frustrating process as I have pretty large hands and everything was incredibly tiny, in incredibly cramped positions, and required more finesse to get in place than I could muster with my fingers alone. As a result I wound up using long needle-nose pliers, including some bent-angle ones, to get most everything plugged in.

This is when I ran into my first major problem though... and one that was not mentioned in the build guide at all. The Case's front panel USB cable wouldn't fit in the motherboard with the CPU cooler fan in place. After trying fruitlessly to get the cable plugged in for 30min I finally gave up and decided to solve the issue the old fashioned way and it plugged in just fine afterwards. (Thanks for saving my ass yet again, Mr. Dremel!)

The other potential issue was due to the CPU cooler and case mounted PSU, which aren't supposed to work together, but once again as the build guide suggested they actually do... with a whopping 3mm clearance between them! At this point I also decided to swap out some of the ribbon power cables that came with the new PSU for some spare braided ones I had from another build since they are much nicer looking and allow for better airflow.

Note: The other supposed incompatibility listed on PCPartPicker is due to the fact that the case only officially supports 3x 2.5" drives or 1x 3.5" with 1x 2.5" but that's easy enough to get around, as explained below.

I also decided to cram an extra SSD under the front case fan, secured with double sided tape to the properly mounted SSD on the case floor panel. It worked just fine and allowed me to get my 3.5" 4TB HDD properly mounted on the underside of the top plate. Linus Tech Tips, in his similar Sugo SG13 build, even managed to squeeze 2 more SSDs above the PSU using double sided tape as well, so I guess that even leaves me with some room to expand my storage later. ;)

The rest of the build assembly process went relatively smoothly and once everything was hooked up, in position and plugged in, it booted straight into windows 10 (which was still on my old 1TB SSD). The moment when a new PC build gets past the POST is always a huge relief, however that momentary relief soon turned to dread as I quickly noticed a pretty big problem; The machine couldn't detect one of my new M.2 SATA drives.

After several hours of frustrated tinkering and much googling I finally found out the reason why, cursing PCPartPicker for not warning me and face-palming pretty hard for not having read the motherboard specs more carefully. It turns out that the Z370N motherboard actually only supports 1x M.2 SATA drive and the second M.2 slot is NVMe only. I had apparently just wasted $140+ on an M.2 SATA drive I couldn't use and my plans to configure them both in RAID 0 was shattered. But that's honestly not the worst part... in order to get the useless M.2 drive back out I had to basically FULLY DISASSEMBLE my entire build again since the NVMe M.2 slot is located on the bottom of the motherboard!

Despite the serious temptation to just leave it in there even though I couldn't use it, I wound up going through with the disassembly purely because I had a pretty good idea for how to actually make use of that second M.2 SATA drive based on something I saw on Linus Tech Tips a few months ago. So rather than leaving it in there or even returning it, after ordering myself the necessary enclosure I now have myself a pretty nice DIY 500GB Thumb drive. ;)

So several hours later after completely taking apart my new build, removing the bottom mounted M.2 SATA drive, and fully reassembling my build once again, I booted it up, it got past the POST and into Windows 10 again. I then reactivated Win 10 on the new hardware configuration (which was surprisingly painless compared to how it used to be where you needed to actually phone Microsoft) and then began the process of installing Linux Mint on the M.2 SATA drive I still had remaining.

Conclusion:
After several days of going at it now, I am finally done and my new computer is fully assembled, functional and ready to use. As always with building computers it was a bit scary, a bit painful, and more than a bit frustrating but ultimately well worth it. I couldn't be happier with the results and can't wait to overclock this bad boy when I get the chance!

By putting the word SILLY in the title, I mean SERIOUS ISSUES such as those are strictly prohibited:

• politics
• religion
• abortion
• capital punishment
• gender politics
• anything else that usually causes trouble or heated discussion
• anything that could lock this thread

Allowed subjects:

• movies
• television
• technology
• love
• food
• animals
• any seemeling stupid thing that will definetely NOT cause any kind of heated discssion