Game designers of tildes, lend me your aid.

My BIL, the life-insurance salesman, has decided to splurge on this year's family reunion and he is renting a castle in SW Ireland next summer. I have been given the task of designing and running a murder-mystery game on one night for the ~20 people who will be staying there. Salient facts:

I refer to my inlaws as the barking and snapping (Irish surname)'s. Hilarious but sarcastic to a fault. They have little patience for depth or lore or much historical detail. This will most successfully be a game of nasty betrayals and sudden twists and turns.

There's something like 18 rooms in the castle, with extensive grounds. But alas we will be there at the beginning of July so there will most likely be a lack of atmospheric ground fog. I love a good outdoor setting, so I will most likely try to get people running through the woods and across the lawns.

The family loves their games and takes them seriously but I figure this shouldn't last more than a couple hours or they will lose focus.

I haven't conducted one of these before but I have plenty of relevant experience. I want to keep it simple with a streamlined and elegant ruleset... but it's important to also find a moment somewhere near the end to scare the living shit out of all of them.

What I have so far: Discovering the Dead Body kicks it off. A couple obvious clues and a couple less-obvious ones will get people haring off into different rooms.

Each "player" has two modes. If the lighting is normal then they are playing as themselves and actively searching for the killer. If the lighting, however, is blacklight and the person within wears a black veil then they are ghosts, and must share a clue from a list on a card. All players will be ghosts at some point, including the Dead Body. If they enter a room with blacklight, on goes the veil.

I want to incorporate the history of the locale, as well as that of deeper legends. I mean, it's fucking Ireland. But I don't want the Disney version. One of my most successful history videos is about ancient Ireland so I'd love to incorporate something of the actual historical record instead of just a bunch of Celtic fantasy bullshit.

Some will be drunk, some sober. All will be barking and snapping. Piling on some poor defenseless unfortunate (usually one of the younger aunts or uncles or cousins) is their favorite entertainment. Subplots that subvert that bullying dynamic are also welcome.

Have any of you created an experience like this? How did you approach it? What kinds of ideas does it inspire in you?

So bit more than one month ago my very old Microsoft Sidewinder X4 keyboard broke the membrane on the 'A' key, meaning it was effectively kaput. I decided that I wanted to try a mechanical.

The Search

My use-cases are as follows, in the order of importance:

1. Gaming
2. Programming
3. General typing

These were the first requirements I settled on, based on my limited knowledge of mechanical keyboards:

• ISO nordic layout
• Full size: Because I make heavy use of both numpad and the insert-delete-home-end-page island of keys. Whatever it is called. I have zero interest in compromising on the standard layout.
• Nice to have: Metal body
• Nice to have: General high-quality
• Nice to have: Wireless, but only if 2.4Gz.
• Nice to have: Tactile switches
• Nice to have: Backlit keys
• Nice to have: Simple elegant aesthetic. I especially want to avoid typical gamer aesthetic.
• Budget basically unlimited

With these requirements I eventually settled on Keychron Q6 Max with Jupiter Brown. But just before ordering one, I started thinking about the height of the keys on a normal old-school mechanical.
I don't remember when I have last used one, all my recent keyboard had been modern low-profile so I didn't have a reference for what I was buying other than images.
I started reading about wrist problems from keyboard height and the recommendation of a wrist rest. I looked at the Keychron options and saw that they only had rests that were completely detached from the keyboard.
Thing is that I move my keyboard around my desk a lot, so I figured that having a wrist-rest that was not attached would become an annoyance.
After this I decided to just stick to what I am used to and added another requirement:

• Low-profile

Unfortunately when you set requirements for 100%, ISO, and low-profile, then the otherwise extensive Keychron catalogue becomes super limited. So I started looking elsewhere.
At the time there was a new post about a search engine on the /r/MechanicalKeyboards front page.
Using this I discovered the Cherry MX 10.0N. This seemed like a good deal. High quality all-metal body.
The only real sticking point was that the switches are linear with very short actuation, but I liked the look of this keyboard so much that I decided I could probably learn to live with it.

The review

The keyboard looks great in person. The all-metal body feels very solid and high-quality. It's got good heft and sticks to the table. The entire board is very thin and feels good to rest on.
The keys also feel high quality with minimal wobbling, and long keys sound and feel the same whether pressed on the edge or in the middle.

That's all the good stuff. Now on to the less good.

The foot

The adjustable foot in the back has no real positions. Meaning that there is no point in adjusting it where it will click in place and stay there, and it is under constant spring pressure to return to the stowed position. This means that the only thing keeping the extended foot in place is the weight of the keyboard. As mentioned I move my keyboard around frequently, and this means that everytime I move it I have to readjust the foot.
Additionally, it's highest position is sort of a balancing point, meaning that it you are a bit off, or accidentally push the keyboard a bit in this position, then the foot will suddenly collapse.
It's a minor annoyance, but one that is unique to this keyboard since I don't see this kind of foot design anywhere else. Otherwise the full-length metal foot is really nice, if only they had added proper click positions in its travel.

The switches

As mentioned, these are linear with very short actuation. CHERRY MX LOW PROFILE RGB SPEED switches to be specific. My first thought when trying to type with these was "Oh my god I hate this, how can some prefer this?!".
Constant mistyping was the name of the game. I was so used to being able to slightly miss a key, but still only actuate the intended. But that doesn't fly with this keyboard. If you depress any key even the slightest, it WILL actuate.
For gaming I first didn't understand why I sometimes kept jumping. I eventually figured out its because the mere weight of my thumb resting on the spacebar can be enough to actuate it sometimes.

After 1 month of regular usage, I can confidently say that my thoughts are now "Oh my god I hate this, how can some prefer this?!". Okay, I improved my typing somewhat to maybe half my mistyping. Gaming is still a pain, and I've had to regularly rest my thumb on the table instead to stop the sudden jumping.
Unfortunately this keyboard does not have hot-swappable switches, so there is no fixing it unless I want to buy a soldering iron and replace every single key, which I am not willing to.

Key spacing

So while the keyboard is technically 100%, Cherry has still designed it to be as compact as possible. One area where they have shaved off the length is the spacing between the main keys and the arrows keys and those above. Aswell as on the other side with the numpad.
I didn't know this prior to puchasing this keyboard, but apparently this spacing is essential for my muscle memory to be able to find those keys. The lack of spacing has meant that maybe 25% of the time I use them, I press the wrong key.

Overall

Now the issue with the switches and spacing is really an issue of preference. These aren’t quality issues. They were designed this way because some people like it (somehow). So if this keyboard looks interesting to you, and these preference design choices don't bother you, then I can only recommend the Cherry MX 10.0N. It really is a very high quality keyboard.

For me though, I just can't overlook these choices, so I have started looking for another keyboard again. I'm currently split between the Cherry KW X ULP and Logitech G915 X Lightspeed. None of them are full-metal body unfortunately. The cherry one seems to be the higher quality, but the the key caps remind me of laptops keys, which I really hate the feel of. Maybe I'm overreacting to it. The Logitech one is lower quality, but has all the the features that I would want. If you know of something better then please do leave a comment. I might reconsider my low-profile requirement. I'll give it at least another month before I become serious about switching again.

There are, in my extremely well-informed and unbiased opinion, not enough discussions about creative writing here on Tildes. Let’s change that. If this gets any meaningful amount of interest, I’ll make it a recurring thing (hence the date in the title—look at me, being all forward-thinking)! 😸

Your goal: Write a creative short story based on the prompt provided and post it in this thread.
Deadline: Per ISO 8601, 2025-01-21T23:59:59-05:00. Here’s a link to decode that mess for non-robots. Two-weeks-ish from the posting of this topic, basically.
Prize: A $20 Proton code! I’m sure all of you insufferable delightful privacy nerds advocates already know what Proton is, but here’s a link for completeness’s sake. It’s already purchased, so you don’t have to worry about any sudden impoverishment robbing you of that sweet, sweet encryption.

Your prompt: Write about someone who finds out their everyday routine has been secretly impactful to strangers in ways they never imagined.

I’m not one much for rules, so there aren’t many:

1. It must be creative writing. Creative fiction and creative non-fiction are both allowed, but if you’re going the second route, ensure you have a strong understanding of what creative non-fiction “feels” like.
2. There aren’t any hard length limits, but the internet tells me that “short story,” as a term, tends to be defined as 1,000–7,500 words. Because I always uncritically believe whatever the first search result I read on the internet tells me, you should probably aim for that range or it may count as a soft demerit. Also, only one submission per person.
3. The winner will be decided entirely by my personal whims, not comment votes. If I let it be decided by votes, the first commenter would basically auto-win, so we’re committing the greatest internet faux pas: relying on subjective judgment. 🙀 That having been said, I have varied tastes and high media literacy (if I may say so), so you should be fine. Probably. Giving a character my name and making her the best person in the world will definitely help your chances.
4. It must be written just for this thread; no previous work. I mean, I have no way of verifying that you didn’t start before now, I guess, but I’ll spot-check a sentence or two online to ensure originality.
5. If you post your full story as a comment in this thread, use collapsible formatting. Collapsible formatting keeps the thread navigable and respectful of others’ submissions. If your work relies on formatting beyond Tildes's simple markdown/images/et cetera, you’re allowed to host a document file/webpage somewhere and link it here, too.

Have at it, and I hope y’all have fun! All of you, whether you’re writing or not, are heavily encouraged to comment your feedback for posted work as a reply! Don’t let your fellow waves feel unappreciated. Putting yourself out there is scary.

(Also, yes, the survey is closed and it’s being actively processed. I promise we’re working on it! It takes time to make pictures and read 577 individual responses to a long survey.)

Edit: I have sent my link to three different people and I am out. Assuming they sign up. However, a lot of people also have invite links that commented. I guess a system would be for the invite-giver to reply to the comment of the invite-receiver to keep track?

—-

I received a link during Thanksgiving that lets me invite several people to a free trial of Kagi.

I tried convincing friends to try it out but most of them were not even interested in a free trial to a paid search engine.

If any of you are interested, please let me know.

I'll give you my link in private and you can register yourself to the free trial.

Posting just in case people are on the same boat as me.

--

Also, I hope it's appropriate to start a topic on this?
Let me know if this is frowned upon.

I received an email this morning from the good folks at the WHE entitled: Perplexity AI Partnership to Improve History Education

In it, their CEO Jan van der Crabben, writes:

As the most-visited history encyclopedia globally, World History Encyclopedia is pleased to announce a strategic partnership with Perplexity.ai.

…

As artificial intelligence (AI) tools based on large language models become increasingly accessible to the public, growing concerns have emerged regarding the quality of information provided by these tools. These AI systems are typically developed and trained using publicly available internet information, often without robust verification processes, and frequently generate inaccurate results.

There are also significant concerns about the business models of AI companies, which utilise content developed and meticulously checked by providers like World History Encyclopedia —a non-profit organisation— without obtaining proper consent, without providing compensation, and without offering appropriate attribution.

Perplexity.ai is an AI-powered search and answer engine that combines the capabilities of a search engine with artificial intelligence. Unlike most other AI systems, Perplexity clearly cites its sources, providing users with an easy way to verify the accuracy of its answers.

In alignment with our goal of being a trusted resource of accurate and objective historical information, we are excited about this partnership. It will allow us to develop tools based on the Perplexity API to make the content in World History Encyclopedia easier to find, browse, and access. We aim to develop educational AI tools for history learning in close collaboration with teachers to augment the World History Encyclopedia website for students.

The partnership will also enable World History Encyclopedia to use artificial intelligence to enhance our human review processes more efficiently. This includes improving tasks such as fact-checking and plagiarism detection.

Additionally, Perplexity is the first AI service that allows providers of information like World History Encyclopedia to be compensated fairly for the AI use of that information. We will receive a share of advertising revenue generated on the Perplexity platform whenever Perplexity cites World History Encyclopedia to answer a question.

I have worked with Jan and his staff many times over the last six years and I find them eminently trustworthy and dedicated to education.

What does everyone think of this kind of partnership moving forward? I understand Perplexity might have a slightly different approach that certain folks find promising.

And what kind of content do we think this might be able to generate? I look forward to your comments.

So my only experience with crypto is buying a little bitcoin after big crashes, ignoring it for 5 years and selling it when theres hype in mainstream media. Happens reliably enough and i made a little change. Also did some fruitless blockchain work when it was a corporate craze in 2017 but overall, don't care for the tech much.

Anyway, I've been looking into some things for work and a lot of roads lead to cryoto. I'm decent at picking apart a reasonable technical system and can call on people who understand legal, financial, logistical or company structures. But the crypto space is a weid mess. It feels like kids playing a pretend game of being a central bank.

There's official documents and company filings with full corporate structures, but everything is just a bit too juvenile. Like you'll see a Senior Auditor with 10 years experience at KPMG, next to the head of marketing: YoloSwagger with an animated One Piece profile pic. There's also these ambitious White Papers attached to code base that seems like the same boilerplate example but with stupid variable names.

A bulk of the info i need is the diction and syntax. Don't know if its because I'm old because I don't get it. I see a lot of start-up and investment language thrown around. And it's mixed with a plenty of meme terms and some utter nonsense. I can't get a straight answer on the meaning of Utility even though its thrown around like a core metric. And don't get me started on Wallets because that definition seems to change mid sentence.

The other thing I need to understand is the technicalities involved and accessing the right info. Before my searches were polluted with the meme coin story today, there's not a lot of good info. Most of what I found was exchanges telling you to not worry about it and give them money, or crypto bros telling you not to worry about it and give them money for their course.

I understand transactions and how everything is just a pump-and-dump to get at whatever liquidity was raised. All the evidence for fraud is obvious in hindsight. There must be ways to track those trends before it happens and find consistent factors. At the same tine how the hell can people just start a coin and other people throw small fortunes at it for a laugh.

I'd be grateful for any good primer unpacking things. It really looks like the normal education is to jump in with you life savings and sink or swim.

Australia’s proposed social media ban is deeply concerning and authoritarian. It's disturbing to see how much of the general public supports this measure.

Prominent organizations, including Amnesty International, the Australian Human Rights Commission, and Electronic Frontiers Australia, have voiced significant concerns about this legislation:

Amnesty International's Explanation of the Social Media Ban
Australian Human Rights Commission on the Proposed Social Media Ban for Under-16s
EFA's Critique of the Social Media Age Ban

Australia has a troubling history with internet legislation. Noteworthy examples include the Australian Internet Firewall under Stephen Conroy and Malcolm Turnbull's infamous statement, "The laws of mathematics are very commendable, but the only law that applies in Australia is the law of Australia," regarding encryption backdoors.

While I recognize the issues with social media, "don't feed the trolls," along with maintaining online anonymity and implementing parental controls ( no phones with unfettered internet access ), should work. This law indiscriminately punishes all Australians for the missteps of a few, potentially leading to increased identity theft through phone and email scams and causing older family who are not tech literate to lose connections with their families due to the complexities of government-issued tokens.

Adults will be the ones who are going to be most impacted by this legislation.

The scope of this law is extensive. The Online Safety website suggests that this is merely the beginning, with plans to cover the entire web, including games, adult content, and more. The consequences are profound: the erosion of true anonymity and increased risk to government whistle-blowers and journalistic sources.

Requiring individuals to provide their identity to a third party to access the internet, which many have used freely for decades, is alarming. It threatens to sanitize search results and revoke access to purchased games if users refuse additional identity verification measures. There are no grandfathered exceptions, highlighting the law's intent to de-anonymize the internet.

Although Australia lacks a constitutionally protected right to free speech, this law poses significant risks to whistleblowers and marginalized youth in remote communities. Instead of banning access and creating allure through prohibition, we should address the root causes of why younger people are drawn to such content.

Once entrenched in law, any opposition will be met with accusations of perversion or indifference to child safety, compounded by the spread of misinformation. We must critically assess and address these laws to protect our freedoms and privacy.

There wouldn't be speculation if they defined how they intend the law to work. Instead of a "don't worry about it we will work it out", give people something to say that's not so bad and I can live with it

Today's problem description: https://adventofcode.com/2024/day/4

Please post your solutions in your own top-level comment. Here's a template you can copy-paste into your comment to format it nicely, with the code collapsed by default inside an expandable section with syntax highlighting (you can replace python with any of the "short names" listed in this page of supported languages):

<details>
<summary>Part 1</summary>

```python
Your code here.
```

</details>

Could someone please recommend a text messaging app for Android that is reasonably secure?

Verizon is discontinuing their native texting (SMS) app. They recommend switching to Google Messages, but I would not like Google to have access to my entire text messaging history. I tried Signal, but my old messages don't transfer over (minor problem), and almost none of my family are willing to switch to Signal (big problem). When I search for advice, I get a bunch of AI slop articles and advertisements. So I figured I might have better luck asking here: Is there any text messaging app for Android that works well and isn't going to hoover up all my data?

Seeing the courts go after Google's monopoly and the unintended consequences to Mozilla (and therefore Firefox) that can happen if the courts make it illegal for Google to pay to be the default search engine, it goes me thinking about Chrome/Chromium.

I know that the courts are trying to force Google to give up its control of Chrome (I don't even know how that is possible for the government to tell a tech company that it is not allowed to develop a tech product it created itself) but it seems to me that Google maintaining Chrome is not really a problem in and of itself. there are many browsers available to folks and if you as a user want to be completely plugged into the google ecosystem at the detriment of your online privacy, that is your choice to make.

the real issue seems to me that a user should have the exact same experience browsing a google website on chrome vs an alternative.

But that made me wonder if (like stopping Google being able to pay to be the default search engine) Google was forced to give up its control of Chrome, what are the possible negative consequences of that to users? and would forcing Google to instead relinquish its control of chromium alleviate those issues?

Alright, time to ask for help. I designed a website for my cousin using Wordpress, hosted via BlueHost. It's 99% done.

The problem: she'd originally registered her domain through wordpress.com. She also has an email through that, which she accesses via Google Workplace. We've transferred the domain, but the nameservers are still registered to wordpress.com. I've found the guides for transferring nameservers on BlueHost and wordpress.com, but this is a step above what I've dealt with in the past.

My main concern and frustration are the email. She's already using it for work, and I want to make sure there's no downtime, but I... honestly have no idea how it's even set up, right now. Or how this would work when transferring hosts entirely. Attempts to search it haven't been too helpful for me.

So my questions: How will changing nameservers impact the email? Would updating them potentially just... break her email entirely? Need her to set up the email separately? And if she does, can it be kept through Google Workplace/Gmail since that's what she's already using? Is it fine to leave it as-is? I assume not but her wordpress.com account shows that it expires in 2027, so...?

Just, please help.

Every time I find myself in an ADHD related thread on the internets, I feel like I'm seeing my personal struggles being described by others (Anxiety, Depression, executive function issues... the list goes on).

My intermittent attempts to seek out a diagnosis (or rule it out) end quickly with all the utter shite noise in the search results (literally everyone is selling something).

I'm hoping some of you who've been down this road can shed some light. Should I just schedule and appointment with my GP and start a conversation or???

Thanks (hope I got this in the right sub-tilde)

UPDATE: Thank you all so much! I ended up setting an appointment with a nearby adhd clinic that does 2 brain scans, a bunch of bloodwork, several questionnaires, and a couple meetings with a psychiatrist/psychologist (can never remember which is which). 1st scan is on Monday morning, 1st meeting with psych* is in early December. Feeling optimistic.

Reading through all your comments, I feel connected and optimistic in a way I've never felt before when pondering what I can see to be atypical behavior/emotions/response to stimuli but felt powerless to address.

Thanks so much for helping a stranger on the internet, hoping to pay it forward someday.

hi tildes,

i’m an audio/video editor and want to work with youtubers (for free, probably). does anyone have any suggestions on where i can find people who either already have a channel and need help or folks who want to start a channel?

i found a subreddit for new youtubers (and their discord server) but it seems to be largely populated with folks who just want to do gaming-related things. to be clear, i’m not 100% against that or anything — i’ve watched some fun gaming stuff before — but i’m more interested in long-form content or even experimental/arthouse stuff.

one suggestion i’ve read was to search youtube itself for this but i struggled finding anything recent and in the realm of things i would be interested in doing.

has anyone noticed anywhere around the web people asking for editors/collaborators for non-gaming content? or does anyone here want help? i think i recall at least one tildes user posting one of their long-form history-related videos.

I watched the video "Dirt-Cheap Solar Generator Setup - What Can It Power?" by Alex Beale yesterday. In the video, the presenter purchases a cheap solar panel and power bank for a total of $250 and tests household devices to see what kind of wattage it can take.

Turns out the cheap device can power most household objects. I'm curious if it's possible to try a similar setup to meaningfully cover my electricity usage on a day-to-day basis. Unlike the creator of this video, I don't have a yard. I'm exploring whether a solar solution could work with my constraints.

I wanted to share this idea with Tildes and hear any ideas/feedback/experiences from people who have tried something similar.

My goal

• Investigate whether it's feasible to save money with this setup
• If so, find a setup that I can use to power some or all of my household devices off-grid
• Pay less in electricity costs
• Be able to rely on my power bank when the building's power goes out

My current situation

• I live in an apartment in an urban area in the US northeast (southeastern Pennsylvania).
• I do NOT have a balcony (sadly).
• I have two south-facing windows and four west-facing windows (two of which get a LOT of light, two of which get a decent amount but not as much). However, my south-facing windows don't get direct sunlight most of the day since there is a building in the way (just a bit in the late afternoon).
• The dimensions of the windowsills are about 16 inches in depth and about 55 inches in width. That's enough for a small or medium-sized solar panel, but not most panels designed for outdoor use.
• I can open the windows all the way and it would be physically possible, in theory, to hang something outside rather than keeping it on the windowsill (we'll get into this...)
• I pay for all my electricity. The heat/air is central and inaccessible, as are a couple of the overhead lights (there are only a couple), but everything else could theoretically be replaced with energy from a power bank, I think.
• I already have a power purchase agreement with a renewable energy supplier. All my energy is "green" in the sense that I'm making it slightly more economically feasible to produce green energy.
• In a less expensive month, the bill might come to around $75. In an expensive month, it might come to around $350. If I heated the unit as much as I would like, it would be higher.
  • I'm pretty sure most of my electricity use is the heat/AC.
  • I'm pretty sure most of the remainder is the washer and dryer dishwasher, followed by the washer and dryer.
  • I spend some amount heating my water otherwise (shower, sinks), but I can't address that with a solar panel.
  • I wouldn't mind saving money on the rest if that's all that's feasible.

My power needs (I think)

• I don't know much power my oven uses. It's electric, which the internet says averages around 2500 W.
• My dishwasher runs at 120 V and 18.7 A. That is... uh... 2244 W. Also a lot.
• My dryer says 120 V on the machine, and if I look up the model number, it seems to be at 15 amps. So that's 1800 watts.
• My washing machine, uses....... IDK how many watts. No information on this thing exists. But it uses a 120 V outlet. The internet says an average washing machine could use up to 1400 W (sounds high, but okay).
• My computer has a 520 W power supply, but I doubt it ever uses that much. It's old and mostly runs Solitaire. Maybe one day I will get a fancy new machine that does like 1000 W.
• My fridge uses 115 V at 4.5 A. Let's pretend that's 120 V and say 540 W.
• I can't tell how many watts my TV uses, but the internet says it could be up to 200 W.

I would want a bit of breathing room with the rated wattage so that the power bank doesn't explode.

No way I can run all these devices simultaneously off the power bank, but perhaps I could time them. Even partial coverage could be adequate if it makes financial sense.

Possible spatial configurations

I see a few possibilities here:

1. Stick a bunch of solar panels in the windowsills, propped up at a suitable angle.
2. Stick the panel directly in the window like an air conditioner. In this case I would want to use a two-sided panel, since there would be some ambient light coming from the inside. This would inevitably reduce my home's energy efficiency, which I would have to account for.
3. Weld some sort of counterweight to a mounting system that I can use outside the window to perch the panel at an ideal angle. This would also reduce my home's energy efficiency, but maybe by less since the gap could be minimized. It is also probably illegal. And dangerous.
4. Just fill my living room with solar panels. I will need to have a conversation about that. But it could be done.

I think #1 is the only one that is actually reasonable. #2 would cost me too much in heating bills to make any sense. I think #3 would get me evicted or sued by the city. And #4 is unreasonable considering that I like to use my house to live in.

My budget

I would maybe spend $500-1000 on this if the payback period was a few years. Not more than 5 because panels by then will be a lot more efficient.

I guess I could spend more than that if it makes sense. I have good credit and a high credit limit. I don't make that much money but I could save for a bit or carry a balance for a bit. I think I would draw a hard line around $3000.

The power doesn't go out here too often, so that isn't the main selling point, more of a nice-to-have.

My research

I'm just looking on Amazon. I know I could maybe get something a little cheaper elsewhere. I'm searching for "power bank with solar panel".

• 4000+ W range: OUPES Mega 5 for $3300+ with panels (I think?). That's a lot of money for something that might not even work. And I don't believe it would be $3300, most other models I'm seeing are closer to $5000.
• 2200 W range: Jackery Explorer 2000 for $2500 with the 2 panels. Maybe this could cover my energy-intensive appliances, one at a time. Still expensive. The solar panels will... maybe fit in the window with about 1/2 inch to spare? I could angle them slightly if needed?
• 1800 W range: (maybe) Anker SOLIX C1000 for $800 with 1 panel. It also says 2400 W so idk what it is really. Can't determine the width of the solar panel.
• 1000 W range: EF ECOFlow River 2 for $700 with 1 panel. I am also not sure how big the panel is.
• 600 W range: SinKeu Portable Power Station for $230 with 1 panel.
• 300 W range: Marbero Solar Generator for $230 with 1 panel.

I'm discovering that these companies never specify the dimensions of the solar panels because they assume no one would ever use them indoors. Probably for good reason. If they don't fit horizontally, I guess I could stand them up lengthwise.

I'm sure it would be possible to find a cheaper solar panel separate from the power bank. But as a ballpark, those are my initial numbers.

Math

Imagine I spend $2500 on the 2200 W Jackery model, with 2 panels. I could put them in the two bright west-facing windows. Let's just pretend they can get their maximum output and that charging time isn't an issue.

Let's say I use this every time I run my oven, dryer, washer, or dishwasher (not at the same time), and otherwise I connect it to my fridge and most other electronics. (I know I said my oven could be 2500 W, but I usually just use one burner, and I bet that's more like 1500 W.) Let's pretend the hassle of running all those cables has been solved somehow.

I really don't know exactly what my electricity breakdown is. If I have the heat/AC mostly off and am not in the unit a whole lot (e.g. traveling for some of the month), that's when I end up with a $75/mo bill. But if I'm out of the unit, that means I'm also not using my dryer/washer and other devices as much. I guess the fridge was still on. The $350 side of things is because it's hot and I'm running the AC more, and maybe slightly higher dryer usage for some laundry-related reason. So maybe I'll say the minimum I'm spending on non-heat/AC electricity per month is $50-100, and at most maybe something like $150.

So in this super optimistic scenario, the portion of my monthly electricity bill I suspect I'd be able to theoretically save would be $50-150. Let's just say $100. That means it would take 25 months to pay back if all goes well. Honestly that's not so bad.

If I instead bought the 1000 W ECOFlow setup for $700, I could cover all my non-intensive electrical uses. The main beneficiary would be the refrigerator, the computer, and maybe the television. I think the savings there would be like $25-50/mo at most, being pretty generous. If I say $35, that would be about a 20-month payoff. That's also pretty good, but if it'll take about the same amount of time to pay for itself, I'd rather get the higher-wattage one.

Numerous caveats:

• It's not always sunny in Philadelphia.
• The panels will not be at 100% efficiency because the window is cloaked in shadow half the day, and there is no way I get the angle perfect, and maybe the glass affects how much energy they can absorb or something (would it help? hurt?). This isn't inherently an issue, except...
• ...that the charging time for the power station might be long. Some of the reviews say 6 hours in maximum sunlight, so for my use-case there's no way it would be faster than 12 hours for a full charge, and probably more. I use my appliances kind of a lot. The fridge is always running, and either the washer, dryer, oven, or dishwasher are running a pretty good chunk of the time. I think that I could get by with this... but I probably wouldn't be able to use it as much as I'd like (there are often moments where more than one is running simultaneously), so...
• ...the payoff time wouldn't actually be 25 months. I suspect there are some factors I'm not thinking about that would reduce the realistic amount of energy I'd save here. Let's say it is half as effective in my setup as a normal person's, because the sun is half as visible or something, and the charging time is too slow to use often, or whatever. At a 50-month payoff (4 years), I would start to get skeptical. But not inherently opposed.
• I use my windowsill for other things that like sunlight, like plants. I would have to move the plants that really love the sun somewhere slightly dimmer. Is it worth it???????
• I also like to look out my window, and if I had a huge solar panel there (especially if I had to stand it up vertically for space reasons), that would be a bummer perhaps.
• Constantly charging and discharging this thing probably reduces its effective wattage output fast. I.D.K. by how much. But there might be a point where I can't use it for my high-wattage devices, which would largely defeat the purpose of buying an expensive model. Not clear to me what the timeline for that would be.
• I still can't figure out if the panels would actually fit in my windowsill.
• Since it wouldn't be able to run more than one energy-intensive device simultaneously, I'd have to be careful not to keep it plugged in to too much stuff at once. It would overall be a bit of a hassle to plug in the panels and the charger and everything. Maybe the panels could stay plugged in, but even so.
• Running extension cords all over the house and putting a giant solar panel in even just one or two of the windows would result in a catastrophic domestic state of affairs. I can just imagine the eye-popping that would happen if I set that up unilaterally.

Takeaway

There is almost definitely something I am not considering. My math is so napkin-based, so imaginary and so optimistic.

But even if the practical efficiency isn't great, I feel like this could maybe possibly actually work, and could save me a bit of money. I would just have to spend it all up front. I mean I don't have $2500 on hand. But I could scrounge up part of it and put the rest on credit. And it would make for living room conversation with guests?

Realistically this seems like an amusing but too-annoying to actually do sort of project. If you know anyone who's done something silly like this and had it work, let me know! I'd be curious what their experience was.

There are currently four computers in my household: a Windows 10 desktop, a Windows 11 laptop, and two additional Linux laptops (those are "mine"). One is a very weak but new machine, basically the cheapest laptop I could buy that was neither Android nor literally a toy. It is running Lubuntu 24.04, and is used largely for writing and light browsing. The other is an older machine running MX Linux. Right now it's single purpose is running my Plex server. Given that setup, transferring files between machines is often a necessity.

Both my desktop computer and my Plex server are connected via Ethernet directly to the router. The other two laptops are connected largely via WIFI, although I do connect my writing laptop via an USB/Ethernet adapter for updates/upgrades and larger downloads when necessary.

Among other things, I often download movies on my Windows 10 desktop computer and then manually transfer them in batches to my Plex external hard-drive, and then to my Plex laptop (when it has enough space, otherwise I just keep the movies on the hard-drive). That is because it is way more convenient for me to (re)search what I wish to wwatch, find and download it to my desktop than it would be the case for my Plex laptop. The laptop is not only in a position that makes it uncomfortable to use but is also very slow even for basic things such as firing up Firefox. I also prefer to do the scraping using MediaElch and while it is a fairly heavy (probably Electron) application, my desktop is powerful enought that it doesn't make any diference. I also use Subsync sometimes, which is, as far a I know, only available as a GUI application on Windows.

Most content I find online is very practical, teaching me how to follow concrete steps to make things work, but I haven't found much advice on which programs or tech "stack" would be adequate for a specific situation such as my own. I just want a robust way to seamlessly transfer file between all the machines on my home without having to plug and unplug hard-disks and flash drives.

Any suggestion? Thanks!

Solved

I was idiotically installing a legacy driver instead of the current driver. I installed the current one and it is now working.

Background on Tildes

For background I posted about distro recommendations a few weeks ago: https://tildes.net/~tech/1ji6/switching_to_linux_looking_for_distro_recommendations. I settled on Fedora KDE Plasma.

Steps taken before the problem

I installed Fedora onto an unallocated space on my SSD, alongside Windows 10. I have tested that Windows 10 is currently working, and that Fedora starts normally. I have also used the boot media to install onto my laptop with no issues. However, on my desktop before installing GPU drivers for my GTX 970, I found Fedora to be quite buggy. This would include the session freezing and needing to be restarted , or my screen would go black with text saying something along the lines "desktop session cannot be unlocked, press ctrl + alt + f3 and login and run a command (I cannot remember the command)" and then I could switch back to my previous session. Overall, it was a buggy mess. My thought process was that it may be a GPU driver issue, and so I started the process of installing RPM fusion and installing the driver from there. I have a GTX 970, so I followed the section titled "Legacy GeForce 8/9/200/300" on this page: https://rpmfusion.org/Howto/NVIDIA?highlight=%28%5CbCategoryHowto%5Cb%29. The commands I ran after installing RPM were: sudo dnf update -y and sudo dnf install xorg-x11-drv-nvidia-340xx akmod-nvidia-340xx and followed all the prompts provided as necessary. I would then leave my computer for about 30min, before returning and restarting (thinking that a restart may be necessary to be fully using the drivers).

Current Situation

After going through the process listed above, I turned my computer on and booted into Fedora. My screen would hang on a black screen with a flashing white underscore at the top left corner. The computer would not get past this point, no matter how long it was left. Hitting "ctrl + alt + f2" would give me a working terminal that I could interact with, showing the basic CLI of Linux working. I did not play around much with the commands, but I do know the basic shutdown now command was working.

Troubleshooting Steps Tried

I was thinking that it may be due to the driver being X11 and I am running Wayland. I searched online and results seemed to indicate that this would not cause an issue
(I will add more steps here when people recommend them)

The other thread about potential spam on the site got me thinking, can/should Tildes hide itself from Google and other search engines (aside from just the main page) to avoid the tentacles of SEO from infiltrating the site? I'm not sure how feasible that is, but I know reddit has the option to prevent your profile from getting indexed by search engines so perhaps that could be applied to the site as a whole.

hello tildes,

i am searching for a bare-bones forum/message board. i'll describe what i need and perhaps someone can point me in the right direction:

must have the ability to

• create an account
• create topics with the ability to reply
• fully customizable front-end (html/css) so i can make it match my website
• either self-host or use a custom domain on ext hosting

unimportant but nice to have

• display images in posts via external urls
• different boards (categories?) to post into (would be nice but not vital)
• nested replies (or some visual way to see what you're replying to)

free would be ideal (dreams are nice) but probably wouldn't want to spend more than $5/month as this is a supplement to a website where i don't expect much traffic at all due to the nature of the project. no images/video/audio will be hosted ideally.

i'm ok with "hacker news" or "reddit-like" software but my backend knowledge if very limited. for instance, i looked into self-hosting lemmy but i don't understand how to setup docker. options like phpbb would be fine if i could strip away everything aside from the above-mentioned features.

i want it to be extremely simplistic in appearance and for the end-user (tildes is a great example of the simplistic end-user experience). tildes could be a cool option but i think getting it setup is a bit out of my skill-range.

can anyone offer any suggestions/guidence?

edited to emphasize important aspects and clarify things that are not vital but would be nice to have.

Solution

I added 20.43.161.105 duckduckgo.com to my hosts file and everything is working fine now.
I also changed DNS servers away from my ISPs, thanks to all the recommendations in this thread.

cat /etc/resolve.conf
nameserver 1.1.1.1
nameserver 1.0.0.1

That seems to be working

> nslookup duckduckgo.com
Server:		1.1.1.1
Address:	1.1.1.1#53

Non-authoritative answer:
Name:	duckduckgo.com
Address: 202.39.62.156
Name:	duckduckgo.com
Address: 2001:b000:1a0:3505:202:39:62:15d

except (note that non-autoratative IP address which belongs to my ISP) ...

> ping -4 duckduckgo.com 
PING duckduckgo.com (202.39.62.156) 56(84) bytes of data.

My ISPs address again. More...

traceroute to duckduckgo.com (202.39.62.156), 30 hops max, 60 byte packets
 1  * * *
 2  * * *
 3  * * *
...
30 * * * *

Why do ping and traceroute not use the new DNS server's I've configured (after re-booting too_)
The only thing to work is to add

20.43.161.105 duckduckgo.com

to my hosts file and now everything seems to be working as expected, though I have doubts now that changing the DNS configuration has done any good.

I know ISPs cache things like youtube to reduce costs so I'm wondering if 202.39.62.156 handled caching of duckduckgo, and they pointed their nameservers there and that box is broken.

Thanks for everyone's input and patience (lol are you still reading???)

Original Question

I've used Duck Duck Go as my main search engine for many, many years.
I have several search engines installed in Firefox including 2 for duck duck go. One for the /lite version and one for the full version.

[See update at bottom]

In recent days neither of these work. I would type my query into the search engine, press enter as I have done for years.

All I see is a blank page.

The latest development is that when I try and enter ANY search to either of those engines I get a GOOGLE 404 not found page.

    
    traceroute duckduckgo.com                                                                                                             ─╯
    traceroute to duckduckgo.com (216.239.38.120), 30 hops max, 60 byte packets
     1  * * *
     2  * * *
     3  The usual internal routing of my ISP
     4  ""          ""            ""
     5  ""          ""            ""
     6  ""          ""            ""
     7  ""          ""            ""
     8  * * *
     9  any-in-2678.1e100.net (216.239.38.120)  4.089 ms  4.077 ms  4.181 ms
    
    ping duckduckgo.com                                                                                                                   ─╯
    PING duckduckgo.com (2001:4860:4802:32::78) 56 data bytes
    64 bytes from any-in-2001-4860-4802-32--78.1e100.net (2001:4860:4802:32::78): icmp_seq=1 ttl=117 time=10.1 ms
    64 bytes from any-in-2001-4860-4802-32--78.1e100.net (2001:4860:4802:32::78): icmp_seq=2 ttl=117 time=8.52 ms
    64 bytes from any-in-2001-4860-4802-32--78.1e100.net (2001:4860:4802:32::78): icmp_seq=3 ttl=117 time=6.87 ms
    64 bytes from any-in-2001-4860-4802-32--78.1e100.net (2001:4860:4802:32::78): icmp_seq=4 ttl=117 time=8.83 ms
    
    --- duckduckgo.com ping statistics ---
    4 packets transmitted, 4 received, 0% packet loss, time 3005ms
    rtt min/avg/max/mdev = 6.873/8.584/10.118/1.155 ms

cat /etc/resolv.conf
> MY ISPs name servers
> MY ISPs name servers

Sure enough I cannot find any pages on the site 2001-4860-4802-32--78.1e100.net which is obviously belongs to google.

This is very very strange.

Could someone verify if they can use DDG or whether they see the same as me?
Does anyone have any idea what's happening?

UPDATE
I can connect to and use DuckDuckGo using a browser VPN. This appears to be a mess made by my ISP.
I'd still like suggestion to overcome the problem though.

My general question ... where do you folks go when searching for replacement parts for aging technology, particularly pertaining to game consoles? I've come across iFixit, and of course there's Amazon and eBay as well, but I've been having some difficulty finding a particular part.

My specific issue is, I have an old Dualshock 4 (model CUH-ZDT2U, with PCB/motherboard model JDM-055) that is on the outs. It started experiencing some stick drift, so I took it apart to clean the contacts in the joystick housing to the best of my ability. In doing so, one of my kids managed to get a hold of the controllers' guts and break off the vibration motor wires from the board.

So, after taking the board and chassis to a local Makerspace, I got the wires soldered back onto the board. So far so good! However, the stick drift is still an issue and the vibration connection isn't that great. So now, I'm hoping to find some replacement parts - namely, a replacement board with the chassis and motors included.

One of the main reasons why I'm trying to refit this old controller, rather than replace it outright ... is because my wife bought the controller (and the PS4 it came with) as an anniversary present years ago. I'm the sentimental type and I'm trying to keep as much of this old controller going as I can, Ship-of-Theseus style. In addition, these controllers don't come cheap - $70 seems to be the basement these days for a new, in-box controller.

I've taken a swing at purchasing replacement parts off eBay - however, while the controller models matched, the board models did not. iFixit has the exact parts I need, but they are out of stock and their stock is inconsistent. I found another site - Fasttech.ca - that purports to have the same parts, but looking around online I've found a fair bit of discussion surrounding this site and the fact that it may be less-than-reputable.

Any advice on where else I might be able to look for parts?

In search of an app where I can pay for pro features once and get a fully featured application. Is it even possible these days?

Ok, now begin rant.

I don't understand - these services are aggregators of other people's content and let's be honest, only have to build a competent media player one time.

Why the subscription? While I fully understand that Adobe kicked off this new evil timeline of permanent rentals, I don't fully understand how this applies for something as simple as a media player.

I love the labels feature of Tildes and use it fairly regularly where I feel appropriate. But recently I wanted to label a post (rather than a comment) and realized that there is no option for that.

Is this something that has been discussed before? I did a cursory search but was not able to find anything specific to labels on posts. I'm not even saying that I'd be 100% for the feature, just wondering if it's been discussed before. Questions like 'would it provide a benefit?' or 'if so, should those labels be the same as the ones for comments?' were along the lines of what I was thinking.

Might be a terrible idea, or difficult to implement for some reason or another, but sometimes I feel like a post could use a label (like 'exemplary' for a well-thought-out post, or 'malice' for one where the article posted feels deceptive and/or misleading) and right now there does not appear to be a way of doing that. Wondering what others think.

Yeah, I bought an ebike from Costco. It was a pretty good deal and it exceeded my expectation in just about every way, at least so far. The only thing that's bugging me right now is that the seat is supposedly super comfortable but my butt is sore after relatively short rides, but I've read that that will go away after a while.

I haven't owned a bike for decades and I was wondering if there was any less obvious things I should look out for. I already figured out that I put on the front wheel off-center because the disc was rubbing against the brake pad, but that was an easy fix. The manual for my bike is painfully lacking in details; half of covers how to use the controller, and the other half is assembly, and even that part wasn't terribly detailed. There were two parts that came in the box that it didn't even mention (a reflector for the handlebars and the derailleur protector - the latter of which I only figured out what it was after I did a reverse image search for it). It appears that it was written for people who already know a lot about bikes. The fork has shocks on it that appear to be adjustable but I don't know how or even why you would want to adjust them. Is there a website or a book that I can find with more detailed info on bikes generally?

Finally, accessories. I already bought two simple things just on impulse: a simple cheap cable lock and a bell (which seems like a strange omission for a bike, but what do I know?). I figure that I should have probably invested in a better lock, though, since it's a fairly expensive machine, so I thought I'd ask what people would recommend. Also are there any other accessories I might consider? I want to get a bottle holder, but I'm looking for a design to 3D print if anyone has any recommendations. It'd be nice to finally bust out my roll of ASA for it.

[Possibly solved, please look at comments]

Hey,

so recently a family member accidentally downloaded a shady browser extension called: "Easy Print" on Firefox. 30k downloads, no ratings, weird "offical" website and installed accidentally trying to buy tickets. I assume it showed something along the lines of: "Buy ticket now" and they just clicked on it (being overall inexperieced with security). Only extension installed was uBlock until then.

I won't post a link just in case, but you can easily find it by googling: "Easy Print Firefox" or "Easy Print App" for their website.

What makes this weirder is that they change the default search engine to Yahoo, which for me was always a red flag for a hijacked browser.

I uninstalled it, but am concerned that they installed something like a keylogger along with it.

Can anyone help me what this is and, especially, how I can properly teach them the basics of internet safety? Not the first time their PC/browser was filled with unwanted stuff...

Thank you and best regards!

I just chatted online with someone currently hiring for a mid-level software engineer who received more than 2,000 applications. That’s ridiculous.

So (inspired by actual events), I’m writing a freelanced article, "Upending the hiring process for technical talent.” Although the topic applies to any job search situation, the story is tuned to software developers and other tech fields, and I expect both remote work and AI to be primary factors.

Getting thousands of applications is nuts for both the company and the applicants. My question is, "What — if anything — can be done to make the process more sane for everybody?"

I would love input from the wise people on Tildes. (Formal attribution is not required, but context is helpful for verisimilitude: "...says one program lead from a midwest insurance firm.") I know you have opinions. However, the HIVE MIND responses I care about should come from people who have been affected by this change – primarily HR professionals and tech industry hiring managers. My short (?) list of questions:

• How many job applications do you typically get today for a technical position such as a software engineer? How has that number changed?
• Are there differences in the applications? I’m open to anything from “remote work expanded the number of people who want to work here” to “They are impersonal and seem AI-generated” to… well, what? Tell me.
• How do you triage the applications (no / maybe / worth talking to)? How long does it take? For HR, what percentage of the applications are provided to the hiring managers? For hiring managers, how does that percentage make you feel?
• How have you changed job listings? For instance, are you asking for more information in the application process or including more detail in the job req? Are you employing tools that claim to sort responses? Are you offering salary transparency so that nobody wastes time when the numbers don’t align?
• What changes have you implemented in the job process? (Turning more to recruiters, for instance? Relying more on employee referrals?)
• Is “return to office” an issue here? (I would imagine that “local candidates only” would reduce the number of applications, but I don’t want to assume too much about any HR connection.)
• Regardless of what your company IS doing to deal with the job application deluge, what — if anything — do you think COULD be done to make the process more sane for everybody? What would you do if you could wave a magic wand to address the problem?

I have an M1 MacBook Air. I use UTM to run a Debian 11 virtual machine.

After the initial setup, updating and upgrading, installing Firefox and a few small programs, (I almost called them apps, d'oh), the Debian.utm file size was about 6GB. Now, less than a month later, it's almost 9GB.

The VM size increases after each use. I haven't downloaded or installed anything close to 3GB worth. I have downloaded files, then put them into the trash and emptied the trash, could the trash not be emptying properly?

I have run ncdu, but nothing stands out. When I drill down into /usr and into each large folder, no sub folder is larger than a few 100MB. I can't see any big files lurking.

I've googled using many search terms, but I can't get past results that are about how to increase the size of a VM that is running out of room.

Thanks very much for reading this, any ideas?

Very similar to how the recipe book in the game "Potion Craft" is organized. I essentially want to be able to mark pages and assign an icon, letter, symbol, or whatever to the tab. Clicking the tab brings you to that page. I also want the freedom to arrange these tabs around the perimeter of the book.

I'm not even sure what search terms to use to find a software like this. I'm not looking for anything robust, just a simple reader app with minimal page marking with intuitive visual organization.

Does anything like this exist?

I've copied the full tweet below (it's from August, I missed this news somehow):

We've been evaluating a number of C++ successor languages for @ladybirdbrowser , and the one best suited to our needs appears to be @SwiftLang 🪶

Over the last few months, I've asked a bunch of folks to pick some little part of our project and try rewriting it in the different languages we were evaluating. The feedback was very clear: everyone preferred Swift!

Why do we like Swift?

First off, Swift has both memory & data race safety (as of v6). It's also a modern language with solid ergonomics.

Something that matters to us a lot is OO. Web specs & browser internals tend to be highly object-oriented, and life is easier when you can model specs closely in your code. Swift has first-class OO support, in many ways even nicer than C++.

The Swift team is also investing heavily in C++ interop, which means there's a real path to incremental adoption, not just gigantic rewrites.

Strong ties to Apple?

Swift has historically been strongly tied to Apple and their platforms, but in the last year, there's been a push for "swiftlang" to become more independent. (It's now in a separate GitHub org, no longer in "apple", for example).

Support for non-Apple platforms is also improving, as is the support for other, LSP-based development environments.

What happens next?

We aren't able to start using it just yet, as the current release of Swift ships with a version of Clang that's too old to grok our existing C++ codebase. But when Swift 6 comes out of beta this fall, we will begin using it!

No language is perfect, and there are a lot of things here that we don't know yet. I'm not aware of anyone doing browser engine stuff in Swift before, so we'll probably end up with feedback for the Swift team as well.

I'm super excited about this! We must steer Ladybird towards memory safety, and the first step is selecting a successor language that we can begin adopting very soon. 🤓🐞

Nitter link:

https://nitter.poast.org/awesomekling/status/1822236888188498031

Original post:

https://x.com/awesomekling/status/1822236888188498031

Some of Kling's replies in that thread are also pretty interesting:

My general thoughts on Rust:
- Excellent for short-lived programs that transform input A to output B
- Clunky for long-lived programs that maintain large complex object graphs
- Really impressive ecosystem
- Toxic community

In the end it came down to Swift vs Rust, and Swift is strictly better in OO support and C++ interop.

The September monthly report for Ladybird released the day after I posted this. It provides basically the same information:

This Month in Ladybird September 2024

The section about Swift:

Successor language search progress

Over the past year, our core contributors have been exploring potential safe languages to complement or succeed C++. We evaluated several options, including Rust, Swift, Fil-C, and others. While some languages offered compelling features, many fell short in either C++ interoperability or providing the level of memory safety we needed.

After extensive testing and discussion, Swift emerged as the top choice among our core developers, thanks to the new Swift 6 interoperability features and its growing cross-platform support. As a result, we’ve decided to adopt Swift as our C++ successor language.

That said, this will be an incremental shift. The existing C++ codebase is deeply embedded in the project, and a complete rewrite would be impractical. Instead, we’ll be gradually introducing new components in Swift, carefully integrating them with our existing C++ code over time. Look forward to a dedicated blog post on the topic soon.

Hi Tildes, I am going to Vienna in November (and if anyone wants to meet up send me a message! but that's another topic), and this is only half vacation, half for a work-related conference, so I want to be able to easily spend a couple hours on work even during the vacation part. To make this easier, I want to buy a portable 2nd monitor that I can plug into my laptop.

I have ZERO experience using such an item, and wasn't even 100% sure they really exist until I searched just now, so I don't think I have any flat requirements. However, I would super like if it takes touch input and comes with a pen! (no i do not want a tablet, I want a 2nd screen for my laptop that I can drag windows & paste between etc). It also should either be super lightweight or be safe to put in my checked luggage (preferably the latter). Minimum 1080p resolution, I don't think the size matters THAT much but at least the size of a normal laptop screen (and not netbook) would be good.

(oops I thought I was pressing enter on a tag but it sent the whole post! edited a bit to finish writing it)

For those who don't know: Dark Tough sells high quality and really tough socks that take forever to wear out or develop holes. They're made in the USA and have a no-bullshit lifetime warranty. I bought my first pair over a year ago. It's actually kind of crazy that I put up with shittier, cheap socks for so long. I'm never going back.

And now, the ol' underwear are starting to get some holes in them. The kind of holes that let the breeze tickle your balls.

Unfortunately, while searching online for the Darn Tough equivalent of underwear, I found a lot of counter-recommendations. Someone would recommend a brand (like Duluth), but then someone else would provide a pretty detailed account of why and how that brand's underwear apparently sucks now, or they don't honor their warranty anymore, etc.

So, I thought I would ask for recommendations on Tildes, since I generally trust the judgement and reviews of you all more than other people on the internet.

It seems like the input fields for comments are missing some required HTML meta parameters or something like that. When I'm typing in them, on mobile, I don't get any autocorrect or autosuggestions, I can't use swipe input, I can't move my cursor with the space bar, etc. This doesn't happen with any other text field on the site (search, post body, ...), so the problem must be in something like the type param of the input element. This is incredibly annoying and there have been multiple times where I didn't want to write a comment just to avoid dealing with this experience.

Edit: it also seems like it happens when editing a post, but it doesn't happen when making a new post

Edit 2: I just tried clicking around and for some reason it only happens when entering a text field for the first time, but not when clicking off and the back into the text field? Might be a GBoard bug then, weird that it doesn't happen on any other site though

Edit 3: the issue only happens that use markdown_textarea with auto_focus=True