Help me understand AC diagnosis, please?
In December 2023, I had the AC replaced for the upstairs of our house. Installed was a "Bryant Preferred 2 Ton" 227TAN02400A and the corresponding Fan Coil FV4CNF002L00. Two weeks ago, when the...
In December 2023, I had the AC replaced for the upstairs of our house. Installed was a "Bryant Preferred 2 Ton" 227TAN02400A and the corresponding Fan Coil FV4CNF002L00.
Two weeks ago, when the heat came (I'm in NE Florida), I noticed that our upstairs was not able to keep up. We keep it set to 73 both up and downstairs and the upstairs unit was just continually running from 11AM-7PM and never getting below 76-77.
A tech came out and let me know that, based on the pressures he was seeing, the expansion valve and coil needed to be replaced. It was under warranty, so I said sure, go for it. The install was scheduled for Monday, a week ago.
That tech showed up last Monday and replaced both parts. When he left, he said that we should be good to go and everything was looking great. Last week was a milder week for temperatures (mid to high eighties), but I did notice the humidity was still quite high in the upstairs (in the 70's and low 80's).
Things still didn't seem right by the end of last week, so I called again and they scheduled someone to come out today.
When the guy showed up today, he checked the pressures and said I was on the low side of the manufacturer's specs. He topped it off a bit and brought me to the high side of the manufacturer's specs.
Of bigger concern he said that my drain pan was cracked. He said this had been identified by the very first tech and the part had been on order since then. He said they installed the coil and valve to get things cooling better even though they didn't have the drain pan in yet.
Today was the first I heard anything about the drain pan. Anyway, they are trying to get that as soon as possible and will have to install it when it comes in.
So, now that the background is done, here's my question. Would this cracked drain pan cause my cooling issues? Right now (4PM) it is 97 outside. My downstairs unit has no problem getting me to 73 and 50% humidity (and shutting off). The upstairs unit is running non-stop and is at 76 (set to 73) and 83% humidity.
I understand that the crack in drain pan is making it "all wet" inside the air handler. I understand that can cause the humidity to be high, but would that also be the cause for cooling issues?