My MSI motherboard recently had an audio issue and crashed/corrupted my PC.

I RMA'd it and did a fresh install of windows.

I fire up my PC - no internet. After some fiddle-fucking around, I try an Ethernet to USB-C adapter. Works fine.

I try a wifi dongle, no issues.

Okay, motherboard issue related to the Ethernet port then, right?

Except, I plug my Ethernet cable directly into my modem, and now it's working totally fine.

Hmm, router issue? But why is it working with the usb-C adapter? Why does it work when I plug it into my steam deck? Factory reset. No dice.

Drivers updated, windows updated, everything has been disabled, re-enabled, reset, turned off and back on, etc. I'm losing my mind.

I would really like to be able to plug my expensive PC directly into my router via Ethernet, but I can't seem to make it happen. Tried two different cables (which work with other devices).

When I connect, it says it's identifying network and then gives me a 169 IP address - DHPS error then? But why wouldn't that be resolved by the clean install and the factory reset?

Everything is set to auto in terms of IP and DHPS. Everything is enabled as it should be. No firewall. No security. No blacklisted devices. Why won't my router assign an IP address to my PC when connected directly via Ethernet? And why is it working fine when connected to my modem?

msi motherboard and TP-link router by the way.

Edit: Alright folks, I'm just going to squeeze in a network card. I don't want to do another three weeks with no PC and this mobo is just old enough that I don't feel like RMA'ing repeatedly unless I have to. I really tried everything and have ruled out the router and Ethernet cable. Thank you all so much for your help.

Edit: Threw a new network card in. Used my second PCIEx16 slot. Nothing will fit there anyway since it's microatx and my gpu takes up so much space. Working great. So probably the mobo having an ethernet defect - not terribly surprising considering this was just RMA'd and they sent me back the same mobo after repair. If it shits the bed again, I'll just get a new mobo entirely. it's not an expensive one luckily. Thanks again everyone!

Im just kind of done with Windows and 10 has been stable, but 11 seems to be even more intrusive and I find all the AI 'assistance' to be incredibly annoying. Im just kind of done with MS and Office and I want to try something else.

I dont have many needs. I run LibreOffice spreadsheet and word processor and the only other software I need to work is CORELdraw and CORELpaint as I still do a fair bit of design work on them and Ive been using them for 30 years so I dont want to switch. Other than that its just browsing (Firefox), email (Thunderbird) and TurboTax.

My question is how do I know whats going to work until I try it? And which version of Linux is easiest and most stable? I dont want to have to keep upgrading, I just want a stable usable fairly easy to learn OS that works with what Ive got as Im unlikely to be changing much. Suggestions?

Okay, I’ve been grinding through the process of replacing Windows 10 in my Twitch streaming setup with Pop!_OS. I’ve got OBS dialed in, my old NVIDIA card is holding it together surprisingly well, and video performance is right where I need it.

But the audio. Is. Destroying. Me.

It’s this horrible crunchy, crushed mess when I stream from Linux. Same exact hardware, same OBS scene setup. On Windows 10 it’s crystal clear. I’m pulling audio from my mixer and theres no “Line In” I can see. Something in the Linux chain is mangling it.

Here’s a side-by-side if you want to hear the pain:

Pop!_OS (crushed audio): https://youtu.be/wQUVlufAQs8?si=RlGH8Z90dK0X9KhA

Windows 10 (clean audio): https://youtu.be/hbJzIHzg_ek?si=ThiZpbBgTk89qL2p

Sample rates seem to match, nothing obvious is clipping. I’m out of ideas and running on pure stubbornness at this point.

Would love to hear from anyone who’s made Linux work in a similar setup. Tips, gotchas, weird fixes. Whatever you've got. I'm so close to fully escaping Windows here. Grrr.

For reference, here’s how I got my Pop!_OS setup working so far (OBS + NVIDIA NVENC + GTX 960):
https://doubledropdown.com/abdoanmes/2025/ditching-windows-setting-up-obs-with-nvidia-nvenc-on-linux-pop_os-gtx-960/

As per title this is inspired by my recent problems with a Latitude 7320 notebook.

I can't use my desktop right now and so wanted some cheaper nb for normal usage and eventually settled on this model due to being able to get it at an acceptable ratio of price to age and seeing it as compatible on Ubuntu, not noticing the disclaimer until later.

The problems started right after installing Fedora KDE - the nb was running at absolutely abysmal performance and this problem affects several models.

Running passmark I've got above 2000 on cpu, on Windows I had 11000. The cpu was throttling to 1500Mhz and lower for no reason. Switching a BIOS setting of power management to "ultra performance" got me to twice the score.

Eventually using throttled from github for various Lenovo and Dell models and thermald I was able to get to twice that again, still a fifth less than on Windows. Also the repo has potential of security concerns due to how it works, also potential to just stop working due to them later.

Mainly I'm posting this to just say that there is zero legitimate technical reason why this should happen, it works on Windows and on Dell tampered Ubuntu images. The hw is fine but for some reason someone somewhere decided to artificially limit the hw for whatever reason.

Right now I am still indecided if I should write off the several hours I've spent on this and return the machine to play the dice with some other model.

Edit 5.4.: it turns out I was not using the throttled package correctly and now have roughly equivalent performace in Linux as in Windows up from the 4/5 or so after all the other workarounds. All of the points still apply though. I also heartily recommend s-tui as a nice utility for cpu monitoring and stress test.

Title kinda gives the gist of it all.

I have been wondering about a way to have a "full" desktop with just XR glasses, a phone, bluetooth keyboard, and an internet connection.

Not sure if this is easily doable, or if Windows VMs would be so expensive to make it pointless. Maybe something like WINE or w/e the not 20 year outdated current thing is to run Windows software.

The main use would be to run 1-2 browsers and trading software.

Just curious if this is a foolish idea or not.

I'm doing a long overdo computer update (new CPU, mobo, and RAM), and am going to be reinstalling windows for the first time in a while. My current system is still on Win10 due to incompatiblity with Win11, however I wouldn't have updated to Win11 until now anyway. I have Win11 on a Surface Pro and with recent updates adding features that match my existing muscle memory better (such as allowing expanded window buttons and putting Start on the left), I'm not as resistant to installing Win11 on my new hardware. I have access to the Education version of Win11 which after some research looks like it's basically Windows Enterprise and that itself seems like a big feature since it shouldn't come with a lot of the bloat apps already.

With that in mind I have few questions:

1. Does anyone have a PowerShell script they've put together to run on a fresh Windows 11 install that configures a lot of the settings to make it behave more like Win10 (and it's predecessors), toggles privacy settings on, etc. I am not looking for something that tries to strip anything out, I just want something that will save me time chasing down all the settings I've slowly found and adjusted on my Surface. I have the default folders like Pictures and Documents pointed to a drive on a seperate drive from my Windows drive specifically to make migrating to a new installation easier. I'd love something that prompts me to update where those shortcuts should point as well.
2. Does anyone have any protips for getting the bulk of programs I need installed? I looked at Winget and Chocolatey a couple years ago, but they didn't quite look as fuss free as I was looking for. I generally avoid installing things from the Microsoft app store (which I understand would make this easier if I was willing to lean more into the Microsoft ecosystem). I'd love something (script based or otherwise) that's going to grab and install the program (rather than app) for a list of things like Firefox, Spotify, Steam, Miniconda, etc. I plan to make a list of programs I have installed that I know I will want to reinstall before doing the fresh install, but I'm making a plan to make installing everything as easy as possible. If there's a reliable script based way to install like 80% of my main programs I'd be thrilled to only have to track down and install more specialized stuff.
3. Any general advice for transfering my browser data? I use Firefox, am signed in to an account, and think I have everything set to sync. However I'd love to bring over all my browser tabs and windows I'm still working in. I did look up how to transfer the browser data and found a Mozilla article for it, just wasn't sure if anyone had a method they discovered and like better.

Thanks in advance for tips and advice.

Hi Tildes community,
I'm seeking your suggestions for spinning up Windows virtual desktop.
Allow me to set the context...
My offspring is in second semester of their first year of university, and needs to use Adobe Photoshop for one of their classes this semester. They don't use a regular laptop, and have been doing quite well at uni. with their beefy Ipad. While they have used photoshop so far on their ipad, there are some growing pains. Of course, they have access to super beefy desktop Apple Macs at their school's computer lab, but its a pain to get usage of them for a few reasons. At home, all my machines are linux except for my partner's which is an old clunker Windows laptop - which i am in progress of migrating themn away from that Windows machine towards linux laptop...Hence, I don't really have a solid, modern enough machine for my offspring to load Photoshop onto.

Then, I thought, hey, maybe i can spin up some Windows virtual desktop somewhere for my offspring to use photoshop on...Its only needed for about 10 or 12 weeks remaining this semester...and they only need to use it once per week for each week's assignments. I feel like as long as the virtual windows machine is beefy enough to suppoort photoshop workloads, it can get them through the semester...and then in summer i can decide if I need to buy them an actual laptop (like an Apple laptop, etc.).

So, may i ask of you dear Tildes community members...Does my approach make sense (of trying to use a windows virt. desktop)? And, if so, are there any recommendations for which provider to use, and how to spin these up? Like, should i try something via AWS or Google Cloud or Azure? Or, should i not even consider this virtual windows approach? I'm open to hearing any/a ll recommendations. If you have links to share for me to research, or if you actually wrote your own blog post on similar topic for example, i'd love to hear it! Thanks in advance!!

Edit: 2025-02-24 UPDATE: Wanted to update folks on where i am on this...After reviewing these comments, researching some more both online and offline, etc...I arrived at the decision of biting the bullet and just buying my kid an Apple Macbook laptop. I want to thank you all for all your greet feedback and suggestions! Thanks so much Tildes community!!!

I am using Windows 10.

That is perhaps a silly question to ask, but I did not find an answer.

Suppose that I have a playlist with 100 videos on VLC or some other video player. I wish for it to play all the one hundred files in random order, with the exception that any video that was already played (or, possibly, played to completion) will be excluded, and will not be played again. A video not played to completion would resume from where it stopped.

This should be persistent, so the next time I fire up the playlist it starts from where I left it and also remembers the videos that were already played and should be skipped. Ideally, upon completion of the playlist, I should be able to learn that it was complete, so I could get new videos/episodes of whatever shows I am shuffling.

Thanks!

EDIT: I understand I can actually pre-shuffle the playlist to get something very similar to what I am asking. However, I would rather not know what is coming next. Like it used to be when I watched TV back in the day. Thanks! ;)

Hi folks--I am very excited about a gaming PC that I just bought for my family (mainly 13yo son into gaming, coding, and digital art).

I installed the video card (only piece sent separately), went through Windows setup/updates. Installed peripherals. Updated video card drivers. Installed Steam/GIMP/Krita. Made 13yo an adult in my Steam Family. Installed a few of the games so something is ready to run right away. I even have the small Wacom tablet working in GIMP and Inkscape with a good pressure profile!

All that said, I used to set up my own Windows PCs (looooong) ago, and I'm wondering if it's really that simple. It was very easy.

I did small utility things like run Startallback and install PowerToys. I figured MS Visual Code is next?

Anything else you all can suggest?

(P.S. is there a way to move all his Minecraft stuff to his new Microsoft account? He's tired of logging in as me, and I'm tired of sending him auth codes.)

There are currently four computers in my household: a Windows 10 desktop, a Windows 11 laptop, and two additional Linux laptops (those are "mine"). One is a very weak but new machine, basically the cheapest laptop I could buy that was neither Android nor literally a toy. It is running Lubuntu 24.04, and is used largely for writing and light browsing. The other is an older machine running MX Linux. Right now it's single purpose is running my Plex server. Given that setup, transferring files between machines is often a necessity.

Both my desktop computer and my Plex server are connected via Ethernet directly to the router. The other two laptops are connected largely via WIFI, although I do connect my writing laptop via an USB/Ethernet adapter for updates/upgrades and larger downloads when necessary.

Among other things, I often download movies on my Windows 10 desktop computer and then manually transfer them in batches to my Plex external hard-drive, and then to my Plex laptop (when it has enough space, otherwise I just keep the movies on the hard-drive). That is because it is way more convenient for me to (re)search what I wish to wwatch, find and download it to my desktop than it would be the case for my Plex laptop. The laptop is not only in a position that makes it uncomfortable to use but is also very slow even for basic things such as firing up Firefox. I also prefer to do the scraping using MediaElch and while it is a fairly heavy (probably Electron) application, my desktop is powerful enought that it doesn't make any diference. I also use Subsync sometimes, which is, as far a I know, only available as a GUI application on Windows.

Most content I find online is very practical, teaching me how to follow concrete steps to make things work, but I haven't found much advice on which programs or tech "stack" would be adequate for a specific situation such as my own. I just want a robust way to seamlessly transfer file between all the machines on my home without having to plug and unplug hard-disks and flash drives.

Any suggestion? Thanks!

I might have to have two running laptops for work.

Desk space is at a premium. Right now I have my work laptop stacked on top of my personal PC on my desk ( tower, on its side, on a stand ).

Would a rack like this one, with a lap top on each shelf be enough to keep the magnets on the lids of each laptop from interfering with each other? What about protecting each laptop from the heat of the other laptop?

I already have a mechanical KVM. I will just need to buy one that accommodates more than 2 computers.

Please, let me know if I have overlooked any considerations.

Thank you.

Can someone recommend a KVM that works? I've been looking for a couple of years now.

Requirements:

• 2-port, 1-monitor, DisplayPort 1.4 KVM
• Has a wired push button switch (and cable can be extended if needed)
• Runs at 3840x2160 @ 120 Hz (or 60 Hz)
• Works with HP docking station (HP USB-C Dock G5 for business)
• Works with Classic 101 Black Buckling Spring USB keyboard
• Works with Logitech TrackMan Marble Trackball
• Works with HP laptop and custom desktop build (NVIDIA T1000 GPU)

Anti-requirements:

• Does not intercept keystrokes (or can be disabled)
• Does not intercept mouse scrolling (or can be disabled)
• Does not randomly repeat keys
• Does not block certain keystrokes (e.g., ctrl+shift+t)
• Does not let Windows laptop go to sleep
• Does not require manually re-waking Windows laptop by pushing power button
• Does not require switching back-and-forth to re-establish connectivity to both computers
• Does not take more than 3 seconds to switch between computers
• Does not randomly blank the screen for 1 second
• Does not require unplugging and re-plugging the USB keyboard

Here's the setup showing both computers and the push button switch:

• https://i.ibb.co/5nrDk21/kvm-setup.jpg
• https://i.ibb.co/hFsjT3S/kvm-switch.jpg

I have tried:

• IOGEAR GCS62DP (almost perfect; kills keyboard after 60 swaps; RMA'd)
• DiamondTiger KVM Switch EDID 8K@60Hz, 4K@144Hz, DP 1.4 (repeats keys, blanks screen, has screen tearing, and many other issues)
• CanadaComputers iCAN HDMI USB KVM Switch 2x1 with Switch Extension 4K 60Hz (completely blocks certain keystrokes)

Wendell's Level1Techs Store offers a highly recommended KVM, yet lacks a wired toggle button.

What other KVM switches are available that "just work" and have a wired push button for switching?

The next KVM I'm thinking about trying:

• GiantMatrix with LINDY EDID Emulator

ATEN also has a switch, which is on par with the IOGEAR (4K @ 60 Hz, no EDID):

• 2-Port USB DisplayPort/Audio KVM Switch

Just had a chat with friends about the possibility and how it would likely be introduced.

Paraphrased into the following;

2.99$/Month
OEM installs have a 2 year license
Upgrades are free for the first year (from 11 to the new)
Comes with Office 365 and AI functionality to soften the blow

What are your thoughts on this?

Fellow PC builders, here's a fun one for you.

I took some "old" and no-longer-used PC parts and built my sister-in-law a gaming PC for her and her stepdaughter to use. It was a Christmas gift so the stepdaughter could play the Sims.

She has called me three times to tell me it's completely frozen - like hard locked, dead freeze, screen is displaying the last frame it was on but you can't interact with the PC in any way until you reset it with the power button.

She let it sit for an hour before she gave up. Two times this happened while stepdaughter was playing the Sims 4 and once it happened while my brother-in-law was watching YouTube videos.

Obviously, I went through the usual things you'd think in this situation and I had her bring the PC over so I could do some digging. Fully expecting to find a hardware issue, I tried the following:

1. I ran the Sims while also watching multiple YouTube videos in the background. Couldn't replicate the issue after about two hours.

2. I obviously checked the temperatures while gaming and YouTubing, checked the usual performance metrics and everything was great.

3. Ran OTTC stress tests - all of them. Under heavy loads, this thing was doing fine. Even at 100% utilization, the memory, graphics card, and cpu were fine. Did a power test too, fine. Did a "combined" stress test and all was fine.

4. Ran mem86, no issues with the memory, no bad sectors or errors.

5. Played Skyrim on ultra for several hours. This was a really fun way to troubleshoot.

6. Checked the event log from the day she had freezes. I can see where the event happened because leading up to the unexpected "power off" event, there were a ton of events related to various processes timing out. Seems like it was unable to connect with services and run certain background processes while it was frozen? I didn't see anything that really stood out to me as being a possible cause except...

7. in the event viewer, there were a few events related to Microsoft family safety. I set this up at the request of SIL so stepdaughter wouldn't get into anything she shouldn't. In the Event Viewer, it seems like maybe it wasn't verifying something correctly or didn't have permissions it needed? Upon Googling, I found some other folks with this error but I couldn't find anything about whether it caused freezing or not. Seems like one of the many events that just gives a warning but doesn't have any effect. One guy who had this issue had his computer freeze but disabling the family safety entirely did nothing. People in the comments thought it probably wasn't related. I also found another event that Google wasn't very helpful with. Might have been related to sound card but my sound card drivers are up to date and again, I have not been able to replicate the issue even when gaming and watching videos, so I don't know if it's related.

8. I ran the Windows System Files Checker and found no issues related to my Windows install.

I can't figure out why this would be happening only at her house. She says it froze after one hour of use every time. This brings me to the title of this post. My SIL moved into a really old house with sketchy wiring. My FIL told her the wiring is so bad that she needs to get it fixed immediately or risk a fire, so she's working on that. This house has a butler stairway, asbestos, and plaster/lathe walls if that tells you what we're dealing with here. This is the ONLY thing I can think of that would possibly be different between the two setups and maybe explain the freezing, but it just seems so unlikely to me that this is the cause.

Help?