To set the stage, I've always been a fan of non-nonsense reliable phones. My cellular usage started with a Nokia brick, moved on to a few Motorolo flip phones, then entered the Blackberry world as soon as data service become available in my area. With the demise of RIM, I went o a Moto X, made a misstep in to the Samsung world, then to a Pixel, a Pixel 3XL, and now a Pixel 7 Pro.

I only made the jump to the 7 Pro due to the 3XL starting to show it's age. The charging part wouldn't always connect, the battery would barely make it through the day, and the case was starting to fall apart. Of within three days of removing the case I dropped the phone, cracking the glass back....

The 7 Pro is awful to hold, without a case. I was waiting a week for the Spigen Liquid Air case to show up, and during the time I hated using the phone. The camera bulge felt awkward and sharp, the surfaces were slippery and the phone would slide around. The rounded edges of the screen would produce phantom taps, just all around a bad experience. Now that I've added the case though, it feels a whole lot better.

The user experience has been fairly good, thought not without some annoying bugs. I did the migration from my old Pixel to my new one, and while it did a reasonably job, preserving the launcher layout etc, the app installation process was strange. Google Play tried to install all the apps, but was stalled. I had to tap on each app to manually install them, they were just sitting there "Pending...", whether I was on battery or charger, WiFi or mobile. Once everything installed, and I added my accounts, it was fine, and now apps auto-update.

Notifications are acting a bit funny with Reddit is Fun, although that won't be an issue for much longer :-(. If I get notified of Mod Mail and a Message in RiF, tapping the notification message does nothing. This worked fine on the 3XL. I've also had one spontaneous reboot, and one night where the phone was plugged in, but decided not to charge. Lots of people complained about heat issues, which was a problem for me on the 3XL, but only in extreme cases. After sitting out in full sun with the 7 Pro, I'd say it is about the same, possibly a bit better regarding it's overheating. Many people also reported that the phone would feel warm/hot in their hands for the first few days as it "learned" your behavior. Never experienced that. Battery life and (lack of) heat levels have remained the same.

With all the new people running around, thought it be a good time to ask what everyone uses for gaming...

Are you a console convert?
A portable gaming pro?
Desktop diehard?
Lifelong laptop leaderboard-er?
Teak-tabletop-till-you-die?
Archive level retro-gaming repository?
Custom collectible card game covers?
Tired of my poor attempts at alliteration?

I really like tinkering with older PC's, trying to make them work for modern usecases which is mostly using web browser.

Anyone else do this here? Or interested in it?

I have old 10" netbook from 2007 or so, it has 1gb RAM and Intel Atom 32bit that barely can handle things. However, I switched it's old SATA hard drive to an SSD, and it is a bit faster at booting now! I also ordered 2gb RAM stick, so maybe that will help it a bit too. It's also running OpenSUSE Tumbleweed 32 bit, but i dont recommend this for linux newcomers since it's a bit different distro.

If you have an old laptop or PC lying around, try breathing life into it by installing a Linux distro like Debian 12. Change a spinning hard drive to an SSD. For even older retro hardware there are even SD card adapters and such, that can work in place of old hard drives.

My goal is to make this tiny netbook good for light web browsing and maybe even scripting on things and having a Matrix chat window open. It's perfect tablet size, but very underpowered, even during it's release, so it's a challenge. But that's what makes this kinda fun! Also it helps tone down e-waste if one can use an old device for modern things.

I am looking for a wi-fi tablet for singing from pdf sheet music on a shared Google Drive. The phone is too small of a screen.

In the past, tablets at this price are often junk, already end-of-life, and run so badly they are unusable (balky when simply scrolling). So, I am still using paper for now, afraid to buy yet another disappointing piece of junk despite not needing anything high end.

Any suggestions?

I'm interested in buying one of the new PC gaming handhelds, and I'm torn. If I went for the Steam Deck I'd be buying the 512GB version, so the price difference between it and the ASUS is only about £50/£100 more. The ASUS seems to do a lot better in benchmarks, has a nicer screen, and comes with Windows 11. I love Linux but there's several games I'd want to play on it that the anti cheat just won't work with Linux. I know you can dual boot the Steam Deck, so that could also be an option. The main thing that is making the decision more difficult is that the Steam Deck has touchpads, and the ASUS apparantly has inferior thumbsticks and D-pad. But then again the ASUS is sleeker and lighter, so potentially more portable? Sorry for the ramble, I just wanted to express my thoughts so far, and hear what you all think. Help me decide!

I'm in the market for an external monitor for my Macbook M1 and wanted some advice on what I should get. I pretty much only code, read pdfs and webpages, and watch videos (not movies really) on my laptop, so these would be the use cases. I'm trying not to break the bank here so I was looking at some budget options. The Macbook has USB-C so I would be looking for a monitor with that, but my main question is regarding resolution. Do I really need a 4K monitor for my use cases? I'd be interested in hearing people's experiences with 4K versus without — I've never had one but I'm wondering if now is the time to splurge and get it? Will the difference be very noticeable if I'm primarily looking at text?

My first place option right now is this one from Asus, so I'm curious if the brand is reliable as well. I don't think I've ever had an Asus product. If I were to splurge and get a 4K monitor I would probably get this Dell, but at $400 its a bit more than I was hoping to spend. But I also don't want to get a monitor that I immediately want to upgrade. Curious what other people's thoughts and experiences have been.

EDIT: See my comment for some updates. I've backed away from the 1080p options!

It has been one year since the Steam Deck officially launched.

At the time:

• you had to wait a long time, months even, to be able to get the hardware
• the number of supported games was low
• the software was still highly buggy and rough around the edges

Currently:

• it is available on-demand, though unfortunately not for all countries
• there are nearly 3,000 Verified and 5,000 Playable games on the device (with many more unconfirmed titles that work anyway)
• the software is much more mature and a healthy ecosystem of third-party applications and support has sprung up

For those here who have Steam Decks, let us know your thoughts on the device, this past year, and the future to come.

Happy Birthday, Steam Deck!

I will shortly have need for a small, low power (power as in watts, not compute power) system for always-on Home Assistant use. However, Raspberry Pis are out of stock everywhere and while they can be had for extortionate prices on various auction/marketplace sites, I'm not sure I want to spend a load of money on something which might not even be what it claims to be.

Home Assistant suggest Odroid which I'd probably go for the C4 edition but it's relatively expensive (I need to add an MMC and a psu and various other things to the listed main board price)

Any suggestions? The Asus Tinkerboard looks overkill and is very expensive. It needs to be capable of running a standard Linux distro, ideally Home Assistant's own OS. Low power consumption is a definite, 2-3W at idle is probably the maximum I'd be happy with. Wifi is a bonus although not required right now - but the ability to add it if needed is essential. Some amount of expansion capability would be good if I want to add hardware sensors or bluetooth or a Zigbee transceiver or whatever. It needs some reasonably amount of compute grunt I assume but I don't think HA is all that hungry for number crunching power. The machine will more than likely be headless at first but a little bit of GPU and graphical IO would be handy if I want to stick a display on it in the future, which I might want to.

Any ideas? Oh, and also must be easily available in/to the UK.

Pretty much what the title says - I’ve been looking for something small and not too expensive to run a few VMs on recently, and I’m just genuinely amazed at where the tiny SBC space is at right now.

The Celeron N5105 seems to be the go to choice at the moment. You can get an entire machine running that CPU that’s slightly smaller than an old double CD jewel case, for $150. Less than $200 if you want 16GB RAM and a fast NVMe SSD in there too. Four decent quality 2.5GbE NICs thrown in as a bonus. And it’s not that much slower than my expensive full size desktop from late 2020.

Part of me thinks I’m just getting old - phones have been plenty of people’s primary computer for years now, after all - but there’s something about having a real standalone x86 PC that size for literally 1/5th the price of a flagship phone that just blows my mind.

I know it's a technical question but I want to know specifically from freelancer perspective. A freelancer's decision making differs from that of regular corporate worker in this regard due to many reasons:

1. Freedom to choose: Unlike corporate, a freelancer isn't imposed any process or specific software guidelines to follow. They're free to use Linux and open source if they want to.
2. No team compatibility: A freelancer can work on specific project with a geographically distant team but they don't have to submit to any long-term compatibility constraints.
3. Budget constraints: A freelancer can't typically afford costly licenses. With corporate, they can scale well and bring down the licensing costs which isn't true for freelancers. Hence, open source software is typically more suited to their workflow (even when using a Windows OS).

Given all these factors, do you think a Windows or Linux laptop is more suited for a typical Freelancer? What do you happen to use?

Step right up and claim your raspberry pi!

I have the following to give away (will cross off as things get claimed, first come first served):

• Raspberry Pi 4 / 4 GB + PoE hat + microSD card
• Raspberry Pi 4 / 4 GB + PoE hat + microSD card
• Raspberry Pi 4 / 4 GB + PoE hat + microSD card
• Raspberry Pi 4 / 4 GB + PoE hat + microSD card
• Raspberry Pi x4 "rack" acrylic enclosure
• 5 port gigabit network switch + 4x 6 inch patch cables

Just pay for shipping. Please only claim one thing (or one Pi and the enclosure).

Hey everyone!

Sorry if this is a long post, but I've done my research and I would like to make a few questions.

I've decided that I would like to buy a NAS mainly to storage all of my documents, photos and videos, so that, I can access them from multiple devices and also use it to upload important documents to Backblaze B2. Then, I've actually discovered that I can install a few Docker containers and I could use it as a media server (Jellyfin) and serve the content to my Apple TV (neat!).

I considered a QNAP (better hardware for the price) but everyone recommends Synology instead (because of the stronger security and better overall software), but to be honest, I'm not sure what should I get.

My budget would be to buy a NAS (without counting the disks) below €1000. Ideally, €500-600 but I don't mind stretching to the €700 mark, if it is really worth it.

Spoiler alert: I think, it should be the DS920+ (4-bay) or the DS1520+ (5-bay). I think a NAS above 4-bay is better for future-proofing.

Looking here in Germany at price comparators, I could buy the DS920+ for €663 and the DS1520+ for €750. But these prices seem to be at an all-time high :(

Questions & Assumptions:

0. I'm not sure if the price difference of about €100 is worth the premium to get the 5-bay model. There are only two differences between these two models: The 5-bay has one extra slot, and it has 4x 1 Gbe LAN ports instead of 2x 1 Gbe. All the rest is the same. What is your opinion?

1. I've read that if you run a few containers (~10) it consumes quite a bit of RAM (~3 Gb), so it should be ideal to have at least 8 Gb. This is the reason I've said that I think I can only choose the DS920+ or DS1520+. Looking at official Synology resellers, these models, seem to come already with 8 Gb, and they are within my budget. Is my research wrong?

2. These two models, have an encryption engine. I think this is necessary to encrypt my files before sending them to Backblaze, or?

3. A lot of people seem to say to simply pick Synology's hybrid RAID setup called SHR-1 or SHR-2. I would go the easy way here and pick one of those two. Would you think that is a bad idea, and it is better to pick a specific (standard) RAID? I've read about the long long long RAID rebuild that could happen in some situations, and picking the "right" RAID could decrease the rebuild in days (or weeks!!!!).

4. In case, I choose a NAS model with Nvme cache slots, most people say it is not worth it to use if you are not running Virtual Machines and the SSD’s "burn" really fast. I have no interest on VMs.

5. Most people say to pick an Enterprise (Server) HDD instead of a NAS HDD mainly because price is similar in some cases and Enterprise has longer life and warranty. I should also pick a CMR HDD which is helium filled. 5400 rpm would be preferable to 7200 rpm because of the noise. Sadly, all Enterprise HDD's and most of NAS HDD's are 7200 rpm. Is the noise difference that big? The NAS will be in our living room.

6. Is 8 TB still the best cost per Terabyte?

7. I was extremely sad to hear that the Hitachi hard drive division was bought by WD. I've had lots of misfortune with WD drives (and let's not forget the debacle with the SMR and CMR drives) and I would prefer not to give money to them, but, nevertheless, I'm still tempted to buy the Ultrastar drives that belonged to Hitachi. Does anyone know if WD kept the components, manufacturing processes, staff, etc., that made these brilliant disks?

8. Following the HDD topic, what is your experience with Seagate or Toshiba drives?

9. These two NAS models have the same Intel Celeron CPU, which supports hardware transcoding. To be honest, I don't know in which cases would that happen. It seems if I use Infuse on the Apple TV it would never transcode (and instead direct play) because Infuse would do the transcoding in software. Should I take in account that hardware transcoding is a must-have or a nice-to-have?

10. Would you recommend having a CCTV system connected to the NAS? Should I dedicate one entire HDD just for the NVR system? Would a standalone NVR device be better?

11. My last question is: Should I just wait for the new model of the DS920+ or DS1520+? The 20 means it was launched in 2020 (in Summer specifically) and it seems Synology refreshes the model every two years., that means, a new model would be available in Summer this year. Most people say it is not worth the wait because Synology is very conservative in its model updates/refreshes. People are saying that a better CPU will be of course available (do I even need that for my use cases?) and probably upgrade the 1 Gbe LAN ports to 2.5 Gbe or 10 Gbe (10 Gbe I really doubt it). I've read that a 4K stream does not fill a 1 Gbe bandwidth, and you could theoretically have three 4K streams in a single 1 Gbe connection. If all else fails, I could just do a link aggregation of the two ports to be 2 Gbe, or?

12. Anything I'm forgetting? Should I be careful with something in particular?

I know I should buy a UPS too, but I think I'll create a separate post regarding this topic because I would also want a recommendation regarding a UPS for my other devices.

I know that I could actually build my own NAS and use Unraid for the OS. Furthermore, I'm just at a time in my life with too much on my plate (baby and small child) and having something that just works is preferable. When they are older and more independent, I'll have more time to investigate this option :)

Again, sorry for the long post. Thank you everyone!

So I disassembled my old PC, and there are a few spare parts that I believe are still good. According to the technician, the motherboard is fried. I have no way to test this, so I'm believing him for now.

I wish to use those parts on a new desktop PC, but I have no idea where to begin... what do I need to buy new? Of what kind/brand/specification/pricepoint?

So here's what I got:

• AMD Ryzen 5 2400G processor
  • with the AMD cooler that came with it
• 1TB 7200RPM non-SSD hard-drive
• 1 Ballistix by Micron 16GB 2400MHz RAM stick
• 1 240GB WD Green Sata SSD M.2 2280

I may have access to another 8GB RAM stick of unknown origins from my partner's old PC, but she's a bit protective of those things so I'll way for her to be home to open it in front of her :P

There's a power source attached to the case, which reads ATX-600W. Image1, image2.

The computer case itself is a little beat up but I don't care about looks at all. Its external dimensions are 34.5cm by 35cm, with a width of 16cm. Here's how it looks (Xbox controller for scale).

I wanna build a new machine with the goals of:

• video editing
  • so Adobe Premiere, Adobe After Effects, some audio work, and maybe streaming.
• gaming
  • nothing super high-end, I'll probably get one or two 1080p 24" monitors because 4K reduces my options quite a bit. But here are some of the games I'm looking forward to playing (all MMOs): World of Warcraft Classic and Retail, FFXIV, Guild Wars 2, and the upcoming Ashes of Creation (which I believe is an Unreal 5 game).

My budget (including the monitor or monitors) is roughly 1400 US dollars. I understand that is not a lot of money for the majority of Tildes users, but that is just my reality. My 1400 US dollars PC is very much a luxury around here.

If needed for budget purposes I can get just one monitor now, and another down the road.

So, what's the best I can do?

Thanks! ;)

So, next year, I will spend two 3-month periods at a place that is 1400km away from my home. Because of my somewhat large, superfast dog, with a tendency to run away and topple people, I will have to go by car, dog in hand (don't worry, I won't be driving :P). Each roundtrip amounts to 42 hours on the road.

At the same time, I'm budgeting for a new desktop workstation for gaming and video editing (so both fun and work). I could get a much inferior gamer laptop with the money, but I wanna have a good machine for things like Adobe After Effects, and the inferior part bothers me quite a bit.

Hence the question: how can I safely transport a desktop PC plus monitor for an 84-hour car trip? Should I take it "whole"? Disassembled? Or not at all? I really don't wanna screw up my brand-new PC!

I started studying again this semester, and have to read a lot of stuff because of it.
As we get nearly all our Books as PDF and reading on my notebook or my phone gets tiering quite fast. So I'm thinking about getting myself an e-reader to make things go easier.

So i tried to find some ressources to learn about e-readers, but the internet (or search engines) these days seem to suck.
So maybe my lovely tildes can help.

must haves:
can read PDF
needs to make reading this "shitty" two colums pages my PDF have good and easy

nice to haves:
FOSS
Backlight

can somebody help me out? or do you know about a resource where I can learn about the pro and cons of the different e-readers, I'm starting with close to 0 knowlege as I never thoght I will need one, I generally prefere to read proper books.