-
13 votes
-
Lotta Wenglén – Riding High (2023)
2 votes -
The story of electronics (2010)
7 votes -
Issues with NGS Library Prep
Greetings Folks, I apologize if this is the wrong spot for this but I'd like to cast a net to see if I can get any additional thoughts or help. I recently started a new job as NGS Library Prep...
Greetings Folks, I apologize if this is the wrong spot for this but I'd like to cast a net to see if I can get any additional thoughts or help.
I recently started a new job as NGS Library Prep Tech - sadly I had only begun training on this briefly at my last position but only got an introduction to Speed/Mag Bead clean up. I was hired because the lab is growing quickly and has had issues with organizational stuff in the past and that is my strong suit (my last position I did a lot of clonal DNA / miniprep stuff as far as the wet work went).
The person I was replacing at my new job was only there for two days and didn't really help a whole lot other than hand me a haphazardly written protocol and said "practice by cleaning ladders at different bead concentrations and running them on a gel."
Did that and was told they look good.
Fast forward to using actual samples: There were a set that needed to be redone because the final pool was lost. When I did my first qubit quants after the post PCR speed bead clean up I noticed that the quant concentrations were ~80% less than what they had been previously.
Today I have some remaining sample that I can push through PCR, my plan is to quant 8 out of the 53 samples of the pre / post PCR plate and then again after I do clean up.
As far as clean up goes I had been trying to do the whole plate at once, but I'm going to go back to just completing a column at a time to ensure my timing is better.
Are there particular spots in the Speed / Mag Bead clean up process that I should be aware that I could be washing away / losing DNA?
Do people have any tips on how to be more 'sure footed' in this process?
Ways that I can better practice and say "yup, I've got this!"?
Thanks for the help, and if this should be posted somewhere else please let me know, but as this is 'science' related I thought it fit best here.
7 votes -
Offbeat Fridays – The thread where offbeat headlines become front page news
Tildes is a very serious site, where we discuss very serious matters like plagiarism, greedflation and grand theft auto.6. Tags culled from the highest voted topics from the last seven days, if...
Tildes is a very serious site, where we discuss very serious matters like plagiarism, greedflation and grand theft auto.6. Tags culled from the highest voted topics from the last seven days, if anyone was half interested.
But one of my favourite tags happens to be offbeat! Taking its original inspiration from Sir Nils Olav III, this thread is looking for any far-fetched
offbeat
stories lurking in the newspapers. It may not deserve its own post, but it deserves a wider audience!8 votes -
What have you been listening to this week?
What have you been listening to this week? You don't need to do a 6000 word review if you don't want to, but please write something! If you've just picked up some music, please update on that as...
What have you been listening to this week? You don't need to do a 6000 word review if you don't want to, but please write something! If you've just picked up some music, please update on that as well, we'd love to see your hauls :)
Feel free to give recs or discuss anything about each others' listening habits.
You can make a chart if you use last.fm:
http://www.tapmusic.net/lastfm/
Remember that linking directly to your image will update with your future listening, make sure to reupload to somewhere like imgur if you'd like it to remain what you have at the time of posting.
9 votes -
Cyberpunk 2077 — Update 2.1 overview
31 votes -
T minus Zero, or releasing a game on Steam
Well, a few minutes ago I finally pushed the button, the game is released. So I wanted to write a short write up of some things that I had to do to release the game. I won't really talk about...
Well, a few minutes ago I finally pushed the button, the game is released. So I wanted to write a short write up of some things that I had to do to release the game. I won't really talk about making the game itself too much, more about the part of actually releasing the game, if you are interested in more of that you can see my posts from Timasomo (1, 2, 3, 4, showcase).
Steam
I have already created many games in the past, I've been making games for more than 5 years, but always as a hobbyist. So I never experienced releasing a game on a platform like Steam. I have to say working with Steam and Steamworks is very pleasant and streamlined, but it is still much more complex than for example releasing a game on itch.io, which is what I did before for all my other games. I'll try to summarize how the process looks like.
First, before you can even get on Steam, you have to register, fill out a ton of paperwork, wait some time for it to be manually approved. Afterwards, you have to pay the 100 dollars for Steam Direct. At this point you finally get a Steam app id, which you can use to start integrating Steam features into your game. For example, having achievements, Steam cloud integration (so the saves get synced between devices), leaderboards and potentially more, especially if you are making a multiplayer game. To make my game I am using Godot, and I found a C# library called Facepunch.Steamworks which made this all quite easy, I'd definitely recommend it if you are using Unity or Godot with C# and want to release your game on Steam.
Before releasing a game on Steam you also have to finish everything on a gigantic checklist, including things like: uploading 10 various header, capsule and other images which are used on the store page and Steam library. An icon for the game. What are the minimum requirements required to run the game, whether the game has adult content, whether it supports controllers, how much the game will cost, screenshots, a trailer, there are just so many things to do! And when you complete parts of this checklist you have to have your game go through manual reviews. Each review could take about 3 days to get done. I failed one review first so I had to resubmit it too and wait again. Let me tell you, if you plan to release a game on Steam, reserve at least a month to do it, and start going through the reviews as soon as possible -- actually I think there even is a minimum of a month before you can release the game from the day you get an app id.
Trailer
Creating a good trailer is super hard. I am not a video creator/editor at all, but luckily I at least own a solid program for creating videos -- Vegas 14 pro, that I got for super cheap in some Humble bundle about 8 or something years ago, so I at least had a good start there. I ended up with not that complex of a project and Vegas still kept crashing when rendering, so I am not sure if I'd recommend it though.
The hardest thing for a trailer is deciding what to put in it for me. I know that a trailer should be super short, should showcase how the gameplay looks, what are the features and so on, but when I got to actually making it, it was still super hard to decide what to put there. How do I even start? I watched a ton of other indie game trailers to get some inspiration and that also didn't help that much. There are some trailers which are really just gameplay, some trailers which are actually just incredible with editing I could never do as a pleb... So I started with something that I know a bit more. I created a very short music track, and decided that I will just edit the trailer to fit the music.
The music track basically splits the trailer into 4/5 very short sections:
- Basic gameplay, how the game looks when you start playing it
- Explaining the roguelite part of the game, selecting spells and items
- More complex gameplay, how some combinations of spells and items can look later in a run
- List of features
- Special bonus ending section showing a "Legendary" spell, which should show how insane spells can get, followed by the logo of the game
I think the trailer ended up being not too bad, but I still had some feedback that it isn't flashy enough. And it's true, but I am not really sure how to improve it easily. When watching the Vampire Survivors trailer for example I can see that they did a much better job: it's so much more dynamic, the music really pumps you up, it's overall better edited, it has cool transitions, camera movement and so on.
End
Releasing a game on Steam was a great experience. I learned so much! I basically made this game over weekends and evenings, since I also have a job. To try maintain my productivity I tried to do at least some work on the game every single day. I have to say that towards the end I started losing some steam (haha), some days scrambling to do at least something late in the evening before I went to sleep. But, if at least someone plays the game I think I want to keep updating it more, I still do really like the game!
Thanks for reading! Feel free to ask me anything about the game, or the game dev process, or about anything basically haha.
Here's the Steam store page, the game costs 5 dollars, I'd love it if you checked it out. If you want to play the game but can't afford it PM me and I'll send you a key for the game (at least once I get the keys I requested -- did you know that Steam has to approve the creation of keys manually? Edit: the keys are now ready)
https://store.steampowered.com/app/2682910/The_Spellswapper/45 votes -
[SOLVED] Recovering data in a very old, possibly corrupted tar archive?
Hi all, There is a tar.gz whose contents I would like to access. The file itself is quite old, last being updated ~20 years ago if I had to guess (I am not sure if this is relevant). The file...
Hi all,
There is a
tar.gz
whose contents I would like to access. The file itself is quite old, last being updated ~20 years ago if I had to guess (I am not sure if this is relevant). The file contains legacy scientific code that I would like for archival purposes and can be found via the "code site" link here. However:- When I download the file and run
tar -xvzf radpack.tar.g
z I get an error:tar: Error opening archive: Unrecognized archive format.
- Likewise, if I try to gunzip it I get
gunzip: radpack.tar.gz: not in gzip format.
- Running
file radpack.tar.gz
only yieldsradpack.tar.gx: data
, indicating file cannot find anything out about it. head radpack.tar.gz
outputs a string of unintelligible unicode.
These are the different solutions I have come across after searching this problem, and to me is good evidence that the file has been corrupted in some way and that may very well be the case. However, for archival and historical purposes it would be great if I could access the contents, so I am compelled to search out other solutions. Are there other options I can try here? Is there some way to confirm that the file is in fact corrupted beyond recovery? Any help on this point would be greatly appreciated. I posted this on stack exchange as well but figured maybe the smart folks here might know.
EDIT:
Just to be clear this has been solved — a functioning copy of the archive was found.
17 votes - When I download the file and run
-
Tales of Kenzera: ZAU | Official reveal trailer
5 votes -
GamersNexus' "Mega Charts" for PC parts
11 votes -
Metaphor: ReFantazio — The Royal Tournament | Trailer
5 votes -
OD | TGA 2023 teaser trailer
3 votes -
Euclidea - interactive geometric puzzles
7 votes -
Polish train manufacturer Newag bricks trains which spend time in competitors' depots
40 votes -
Dave the Diver x Dredge Crossover | Trailer
18 votes -
Windblown | Announcement trailer
5 votes -
How millennials learned to dread motherhood
50 votes -
What games have you been playing, and what's your opinion on them?
What have you been playing lately? Discussion about video games and board games are both welcome. Please don't just make a list of titles, give some thoughts about the game(s) as well.
20 votes -
'Signs of life': Sycamore Gap tree will live on, experts say
34 votes -
A West Virginia judge largely denied Amazon's motion to dismiss lawsuit over selling a spycam disguised as a bathroom hook
22 votes -
Bungie will lose independence within Sony if Destiny 2 fails financial goals
31 votes -
Thoughts on friendships after marriage & setting appropriate expectations
This is a topic that I have been holding to myself for quite some time, mostly because I didn't know how to quite phrase what I wanted to say. I still don't think I am going to do the best job but...
This is a topic that I have been holding to myself for quite some time, mostly because I didn't know how to quite phrase what I wanted to say. I still don't think I am going to do the best job but I wanted to hear what other peoples thoughts.
I'm someone who has always valued my few friendships very highly. My dad drilled into me at a young age that it is better to have fewer, high quality friendships than a plethora of not very meaningful relationships.
As people age and move on to different stages in their life, I completely understand that some people might not have the same amount of time to give you in a day that they previously used to. People get busy, have relationships, get married, etc. Which brings me to my situation and how I feel:
I have a friend who I've known since high school, and we're both 30 now. We've always been pretty good friends and in our later 20's we got even closer. I would say that we both deviate from the 'typical' unemotional guys who don't share how they feel with others. Both him and I would let us know what's going on in our lives and how it made us feel, etc. During this time, he was in a relationship (which he was not super happy with, due to some actions his partner did), but would share some of his more inner thoughts with me rather than her. They weren't the best at communicating with one another.
Fast forward two to three years, I got married, my friend broke up with his then partner. He moved back to his parents place, and the time before my marriage (I lived with my parents and had access to a car) I would try and visit him as often as I can just to hang out at night, or to see how he's doing. I've even driven over at midnight just to hangout with him until 4 AM because he was feeling lonely.
He congratulated me online (my wedding took place in another country, and I know none of my friends could afford to, or would not want to, travel just for a ceremony, so I didn't really invite anyone) but also indirectly told me he was jealous that I was married and stuff and he wasn't. For him, getting married is a much bigger deal than it is for me, I never really minded being single or alone. Please don't misconstrue this as me not being appreciative of my wife. She is very dear to me and I always to provide the best for her.
Fast forward another 2 years, and my friend got married to someone he met online. Since then our friendship has been mostly one sided almost. I had to initiate almost every conversation, and it's like messaging a blank wall, there's no reciprocation, and if there is it is very shallow. On top of that, we hang out much less as well (which I get, you do have to give a certain amount of commitment and attention to your spouse) so messaging is the main way to keep in touch.
Don't get me wrong, I've had this happen to me plenty of times. Mostly in university, had a couple of really good friends (or so I thought), as soon as they get a girlfriend, most of them forget I even exist. Maybe I expected more because I've known him for so long, or maybe I should expect less and accept that in the way our current society is shaped people start forming a bubble around themselves past a certain point in their life and you're no longer included in it.
Maybe this post came off as me being really entitled, I don't know. I just wanted to vent my frustrations somewhere. What does everyone on here think about relationships with their friends when you're married? Are you okay with seeing them less often? Is this just an expected outcome of being married?
27 votes -
FIA opens investigation into Toto and Susie Wolff over conflict of interest claims
8 votes -
GM’s hydrogen ‘power cubes’ will be used in cement mixers and terminal tractors
15 votes -
Plagiarism and You(Tube)
74 votes -
Shutters: What you need to know to avoid mistakes (2017)
7 votes -
US senator warns governments are spying on Apple and Google users via push notifications
38 votes -
‘Godzilla Minus One’ is now top grossing live-action Japanese film in North America after stomping-good opening
38 votes -
Green Day - Dilemma (2023)
4 votes -
AFI Awards film top ten: ‘Barbie’, ‘Oppenheimer’, ‘Maestro’, ‘Killers Of The Flower Moon’ among org’s best of 2023
9 votes -
Discuit is now open-source (AGPLv3)
34 votes -
Climate adaptation in no-man's land: Bridging the conflict-climate gap
4 votes -
The rise and fall (and rise and fall) of Venezuela (2019)
7 votes -
Judas Priest - Trial By Fire (2023)
11 votes -
Shocking study discovers bottlenose dolphins possess electric sixth sense
11 votes -
Any RC enthusiast here?
I recently decided to get a new hobby and have been interested in RC's for a while. I wouldn't mind getting into racing buggies/truggies, however in order to see if I even like the hobby I decided...
I recently decided to get a new hobby and have been interested in RC's for a while. I wouldn't mind getting into racing buggies/truggies, however in order to see if I even like the hobby I decided to get and a decent used basher I can tinker with. I picked up a Arrma Kraton 6s V4 complete with batteries, chargers, and a few other extra's for a good price on FBMP.
I ran it for a few hours and loved it, right now it's tore down into the three major sections and I'm waiting on parts. Previous owner was a 14 year old and it appears it was a pandemic buy, so maintenance is lacking/non-existant.
Before I realized it between running it this morning, tearing it down, research on parts it was 10:00pm at night, lol. My pittbull is currently sulking because I'm late to bed.
15 votes -
Advent of Code starts tonight!
33 votes -
Bōsōzoku: The rebellious film legacy of Japan’s unruly biker gangs
10 votes -
Scandinavia's oldest known ship burial is located in mid-Norway – Merovingian period discovery pushes back tradition of ship burials
11 votes -
Norway's minority government and two opposition parties have agreed to allow seabed mineral exploration in the Arctic region
8 votes -
Sawing off the branch you’re sitting on: removing disfluencies in natural language processing
7 votes -
Introducing Beeper Mini - get blue bubbles on Android
43 votes -
Course evaluations are garbage science
23 votes -
Harvard gutted initial team examining Facebook files following $500 million donation from Chan Zuckerberg Initiative, Whistleblower Aid client reveals
42 votes -
Fallen kingdom: why has Disney had such a terrible year?
33 votes -
Inside the Uvalde response (full documentary)
19 votes -
Spotify is the world's biggest music streamer but rarely turns a profit and just cut 17% of its workforce – its business model looks increasingly precarious
59 votes -
What's inside this crater in Madagascar?
18 votes -
When the great apes at Furuvik Zoo in Sweden broke free from their enclosure last winter, the keepers faced a terrible choice
19 votes