I'm looking for a kit that will give me some practice holding wires in place and soldering connections, hopefully also while giving me a completed object or set of objects that's fun at the end. I'm not completely new to soldering; I've done a couple simple kits and some repair of model trains with loose wires, but I definitely could be a lot better at it and I'd like some guided practice. Emphasis on the "guided," I'm not looking for additional things to repair, I really want a straightforward kit, a range of difficulties in connections would also be great. Any recommendations?

Lately I’ve been experimenting with different desktop monitor setups, primarily for productivity-focused work as a systems engineer (coding, writing docs, Slack, email, terminals, etc.). Over the past few years, I’ve rotated through:
• 3× 24” 1080p monitors
• 2× 24” 1080p monitors + laptop display
• 1× 32” 4K monitor + laptop display
• 1× 32” 4K monitor
• Laptop display only (on a stand)

Surprisingly, I’ve found that I feel the most focused and productive when I use only my laptop display and rely on Alt-Tab to switch between apps.

With larger monitors or multiple displays I start to feel scattered. It almost turns into sensory overload, and my focus drops off.

Has anyone else experienced this? Do you find that larger or multiple monitors decrease your productivity? What setup works best for you?

I have probably a 1/4 of a roll of filament that slid off a roll when I swapped it between a Bambu reusable spool holder. It's been on my floor for a couple months and I have not found any way of getting this back onto a spool, either by trial and error or by finding a good resource online.

All the videos I see are people with tangles on spools, and this would be nice if I was in this situation but I am not.

Any time I try to do this it's just so challenging to get any sort of rhythm or easy process with our ruining the entire thing.

Any advice?

Does anyone here use a tablet for note taking?

I've always used pen and paper for note taking when working or in/around the house. At one point when phones got bigger I did try moving to notes apps but they never clicked. Something about the glossy screen and the levels of fuss to take a note just didn't work.

I recently found out that there's e-ink tablets which try to emulate real note taking, like the Supernote which runs a custom firmware to make note taking as easy as possible. Or the Boox which is Android based, so it has way more apps, but it's got amazing reviews.

There's quite a lot, I'm curious if anyone here has actually used anything like this and what their thoughts are?
Looking at reviews, I'm drawn to the Supernote. But I'd love to hear some real use cases!

I'm frankly all out of ideas on how to solve an issue, so I'm hoping that the Tildes community might have a suggestion for solving this issue.

I have an 8tb HDD that spins up and is recognized by windows when plugged into a USB HDD dock, but in another machine (also running windows 10) the drive can't be seen (**this is using data connections directly to the motherboard).

There is:

• Nothing mechanically wrong with the drive as it reads/writes on the HDD dock.
• I've tested the drive as an NTFS formatted drive and as unallocated.
• Neither Disk Manager nor the bios sees the drive.
• Multiple SATA cables and Power jacks tested on working drives and the non working drive.

Open to thoughts, prayers or possible solutions.

Thank you!

I'm up for both a new phone and a new laptop, I have an Iphone 8 and a Macbook pro (2020) that was a freebie from an old job.

I wanted a new Iphone, but if I did that, only a Macbook can put music on it and that's half what I use my phone for. I don't really need a new laptop, but all of my other devices are Linux and can't put music on an Iphone. So seems like it's either all or nothing here. Either I switch to Android, or I go buy two expensive Apple products soon.

Iphones have always been great to me, the only reason I need a new phone right now is because Apple refuses to support mine any more. The Macbook though, I had that for only a year before the logic board gave out and bricked it. Is that just something that happens with Macbooks? Are all Apple products actually trash and I've just gotten lucky with both Iphone 4s and Iphone 8 being built for war?

Am I dumb for avoiding Android like the plague? Every Android phone I've ever met is loaded with tons of bloatware and insecure as hell, seems like the Windows of the phone world.

My G502s are starting to exhibit the dreaded double-click problem. Now they're old -- I think one is around 10yrs old, the other 6-7yrs old -- so I've gotten solid use out of both. And G502s are cheap enough these days (like US$35 on Amazon) that it'd be inexpensive to replace them with new G502s.

But I'm still annoyed that this is happening. Plus, this isn't my first time having problems with Logitech gaming peripherals. I've had issues with my G305 wireless mouse (dongle stopped working), and I will never buy Logitech gaming keyboards again since replacement keycaps can't be purchased; gotta buy a whole new keyboard. So yeah, trying to avoid Logitech if possible.

Anyway, I like the G502 because it has multiple buttons, particularly the main thumb button (G6), which I use for PTT on Discord/Teamspeak. I then use the other two thumb buttons (G4/G5) as forward/back in browsers or game bindings (along with G7/G8).

Any good alternatives? Let's say ≤US$80. Preference is wired, but non-BT wireless is fine, too. If wireless, ideally it'd AA/AAA batteries so I can quickly swap rechargeable batteries. Lastly, I'm right-handed.

TIA!

so I need computer speakers that

• are less than 6 inch high
• either the left or right speaker has controls that allow me to
  • increase or decrease the volume
  • have 3.5 mm headphone port [optional]
  • button to power on/off [optional]
• wired, either via 3.5 mm headphone jack or USB-C cable

I've tried looking for it but I am having a damn hard time trying to find something that fits all these.

My keyboard is breathing its last, and my mouse probably isn't far behind, so I plan to replace them. I have a K70 (cherry MX) and some expensive light-up mouse.

When I bought these ~10 years ago, it seemed a truth universally acknowledged that a person who used their desktop computer "seriously" for, oh, video games, must be in want of wired peripherals—and never wireless. Supposedly wireless latency was unbearable and device batteries died quickly.

Is this still true? (Was it ever?)

If not, I'd like to try a wireless mouse and keyboard. Cable management is a hassle. My AirPods have been excellent and I don't miss the tangles of old, so I imagine I wouldn't miss these either.

My computer is a workstation which I use for documents, spreadsheets, and video conferencing. Even as a relatively fast typer, I can't imagine wireless latency would exceed the speed between keystrokes. I occasionally play co-op video games games with friends, but nothing intense.

Is there some other drawback I'm missing?

With CES 2026 coming to a close, I figured that like last year, I should make a thread to see what people are excited (or not excited) for.

I honestly wasn't that excited (see recent state of US economy) but I want to your thoughts!

Previous Topics:

Dell's CES 2026 chat was the most pleasingly un-AI briefing I've had in maybe five years
I didn't post in the thread as I didn't have much to add, the top post by @Oxalis basically sums up my thoughts

Nice to see them be honest about how this isn't really panning out. Everyone wants AI except the consumer.

Clicks Communicator: the ultimate communication companion
Again didn't post in here but I'm glad there is a still a market for niche phone.

Some background here - I have a niche YouTube channel, mostly doing longform (often 3+ hour) commentaries on a board game with a friend. We're both very skilled at the game and are apparently entertaining to listen to, but it's all very amateur - I don't really know anything about videomaking except what I've picked up as I go.

That had never really been an issue, because the topic is so niche that only people really interested in the game watch, and they didn't really mind. But last year we got a shout-out from a big YouTuber and the subscriber count has gone up a lot since, to the point where it feels like I really should figure out how to make it a little less amateurish.

I want to start with audio, because that's 90% of what we do. But I don't even know where to start with it.

I got Blue Yetis for both of us a few years ago because I was vaguely aware that was a good mic, but if anything it made it slightly worse than just using headsets (quite a bit more echoey) - I don't know if that was a mistake, and if there are better mics to go for?

I'm also aware that you're supposed to have some kind of padding on the walls to stop the echoing, but that isn't really feasible for me both because I rent, and because all the rooms of the apartment I'm in are absolutely massive. I've heard that you can throw a blanket over your head, which I've tried for a short video but I absolutely couldn't handle for a three hour one. I'm lost on how to solve that too.

If anyone here knows much about it, I'd love either direct advice about it or a recommendation for how/where to learn about this stuff. It's super appreciated!

For reference, I have next to zero knowledge of building electronics. I've replaced the joysticks on two Nintendo joycons (which I actually found pretty fun), and that's it. I also have no experience with 3D printing or designing specific products.

I am also sick of touch screen keyboards on phones, do not like any of of the phones that do have keys or the Clicks phone case (why is it on the BOTTOM—), and currently have a lot of free time.

So my question to you: how would I go about designing my own slide out case with its own keyboard?

Because that is my ideal solution at this point. And in fact, it turns out someone DID make a 3D printed "slider terminal" this year. Except it's for the Note 10 (I have a Galaxy S9), and seems to be used as a full-fledged replacement for a desktop experience with a trackpad. That's neat and will probably appeal to a lot of people here, but personally, I just need physical keys.

Along with the keyboard used for that terminal, I also found this other tiny keyboard which doesn't have the trackpad and is about the same dimensions as my Galaxy S9. Actually I found that first and was trying to figure out if there were any cases that could store and pop that out. The biggest issue is that it would cover my camera except maybe when it's slid out, but screw it, I want a damn physical keyboard.

I do have access to 3D printers (yay public libraries!) and I'm willing to learn Blender in order to make this thing. I just need advice on where to begin and how to tackle this. In particular, I have no clue how to go about the slide out part. I feel like I should be able to figure out how to make a case that fits the dimensions of my phone and the keyboard fairly easily, but no idea where to begin with researching the sliding component.

Besides that, I also know that I'm not alone here in my frustrations with phone keyboards, so I'm hoping we can pool together ideas on how to do this. As far as I can tell there's not really a "one size fits all" solution that would work for all phones (well, except perhaps a foldable case instead of slide-out), but maybe we can at least share decent starting points for people to design their own. For instance, the slider terminal uses a keyboard that came with a remote, and it would never have occurred to me that could be used for this sort of project. And there are a lot of potential workarounds for the camera placements, so Person A may have an idea that doesn't work well for them, but does work better for Person B than their own original idea.

So yeah. Advice, ideas and general brainstorming are welcome!

Just a passing thought, came up in conversation. I'm not talking about warehouses-full, nor even "retirement savings" quantities, but like, all the RAM you and your friends and family could possibly need for the next 3-4 years.

Pros, cons? Too late? Too volatile? Too ___?

Looking to get a tablet for my birthday but I'm so disconnected I don't know what specs to look for, where to get one or a decent price range to expect. I do need something on the cheaper side, but am ok with something good if refurbished. Only ever had a tablet once and it was a "free*" one from Verizon over a decade ago. I'm also open to other device suggestions.

Wants:

1. Not an iPad
2. To be able to use it with an attachable keyboard as a light laptop replacement for the couch.
3. To be able to use it to play mobile games similarly while on the couch.
4. To set up in the kitchen when cooking with recipes or a video.
5. To work for playing/running D&D or Pathfinder (Foundry VTT is the biggest memory user.

I am wanting to be able to disconnect from my phone and all the work apps and social media and such while still playing farmrpg on a lazy night watching a panel show on TV.

Or watch something on the tablet while knitting or something.

Scenario: I am frequently playing video games with my partner, and we have our PCs side-by-side. I am looking for a comfortable set of headphones or earbuds that will also make it easy to hear each other so we can talk while gaming.

Main priorities:

• Openness / Ability to hear physical surroundings
• Comfort for long wear duration (I wear glasses, which rules out most over-the-ear)
• Budget

Nice to haves:

• Audio quality decent enough for gaming (doesn't have to be 3D positional or anything)
• Audio quality acceptable for listening to music while playing some games (but nowhere near audiophile level, not expecting much bass from something light)
• Wireless (but not against a wired option - can be USB or 3.5mm since this will be used exclusively with my PC)

I've really only ruled out one thing: I'm not interested in bone induction headphones. I tried out a pair of JLab JBuds Frames that sit on your glasses, and while they aren't bone induction, the pressure against that area of my head, combined with nothing in my ears, would give me a headache after an hour or two. I suspect I'd have a similar issue with bone induction.

In a world that seems to prioritize noise cancelling, my search for other options has been inconclusive. There's a lot of negative reviews about comfort in options like the Cleer ARC series and Baseus clip-on styles. I found some of the suggestions in a previous thread on bone induction headphones to be interesting, but nothing seems to meet all of my criteria perfectly.

Looking to buy a new laptop, and of the model I'd like (thinkpad carbon x1), it seems like I can choose one with or without an NPU.

My surface-level understanding is they make built in AI processing and a couple other niche uses more efficient. Flip side, they're maybe a marketing gimmick?

Price aside (price difference doesn't seem too great), I'm wondering: should I buy a model with an NPU to help potentially future proof? Are there potential downsides to an npu model? Upsides?

I know there are lots of technical people here, I'd love to hear your thoughts or experiences!

I recently “upgraded” my wife’s computer, since it was about 7 years old and I think the WiFi chip in the motherboard was starting to go (and the motherboard wasn’t Windows 10 compatible either, and she wanted to upgrade to Windows 11).

Of course, upgrading the motherboard to the latest WiFi standards meant upgrading the CPU (also swapped from Intel to AMD), which resulted in getting new RAM as well (a rough time for that, given the prices).

All of that to say, I’m now sitting on a mostly functional old motherboard, cpu, and ram. Basically an entire computer sans case and power supply (I’m sure I have a hard drive laying around somewhere).

Any thoughts on what I could do with it? I’d thought of trying to build out a NAS (or some other home server of sorts), but I’ve been thinking that for 2 years and haven’t done it yet because I haven’t really found a “need” for one. I basically just use my computer for gaming, and I don’t really have or plan to have media collections with seem to be the main use case of a hobby NAS.