Fellow PC builders, here's a fun one for you.

I took some "old" and no-longer-used PC parts and built my sister-in-law a gaming PC for her and her stepdaughter to use. It was a Christmas gift so the stepdaughter could play the Sims.

She has called me three times to tell me it's completely frozen - like hard locked, dead freeze, screen is displaying the last frame it was on but you can't interact with the PC in any way until you reset it with the power button.

She let it sit for an hour before she gave up. Two times this happened while stepdaughter was playing the Sims 4 and once it happened while my brother-in-law was watching YouTube videos.

Obviously, I went through the usual things you'd think in this situation and I had her bring the PC over so I could do some digging. Fully expecting to find a hardware issue, I tried the following:

1. I ran the Sims while also watching multiple YouTube videos in the background. Couldn't replicate the issue after about two hours.

2. I obviously checked the temperatures while gaming and YouTubing, checked the usual performance metrics and everything was great.

3. Ran OTTC stress tests - all of them. Under heavy loads, this thing was doing fine. Even at 100% utilization, the memory, graphics card, and cpu were fine. Did a power test too, fine. Did a "combined" stress test and all was fine.

4. Ran mem86, no issues with the memory, no bad sectors or errors.

5. Played Skyrim on ultra for several hours. This was a really fun way to troubleshoot.

6. Checked the event log from the day she had freezes. I can see where the event happened because leading up to the unexpected "power off" event, there were a ton of events related to various processes timing out. Seems like it was unable to connect with services and run certain background processes while it was frozen? I didn't see anything that really stood out to me as being a possible cause except...

7. in the event viewer, there were a few events related to Microsoft family safety. I set this up at the request of SIL so stepdaughter wouldn't get into anything she shouldn't. In the Event Viewer, it seems like maybe it wasn't verifying something correctly or didn't have permissions it needed? Upon Googling, I found some other folks with this error but I couldn't find anything about whether it caused freezing or not. Seems like one of the many events that just gives a warning but doesn't have any effect. One guy who had this issue had his computer freeze but disabling the family safety entirely did nothing. People in the comments thought it probably wasn't related. I also found another event that Google wasn't very helpful with. Might have been related to sound card but my sound card drivers are up to date and again, I have not been able to replicate the issue even when gaming and watching videos, so I don't know if it's related.

8. I ran the Windows System Files Checker and found no issues related to my Windows install.

I can't figure out why this would be happening only at her house. She says it froze after one hour of use every time. This brings me to the title of this post. My SIL moved into a really old house with sketchy wiring. My FIL told her the wiring is so bad that she needs to get it fixed immediately or risk a fire, so she's working on that. This house has a butler stairway, asbestos, and plaster/lathe walls if that tells you what we're dealing with here. This is the ONLY thing I can think of that would possibly be different between the two setups and maybe explain the freezing, but it just seems so unlikely to me that this is the cause.

Help?

Back in 2022, Tildes helped me build my current PC (Thanks everyone!). Back then I knew that eventually I would have to replace my motherboard, which underwent corrosion and became unreliable. I never turn off or even put my PC to sleep because, otherwise, it won't turn on for hours. I'd like to change that. I'm pretty confident that is an issue with the motherboard, which underwent repairs before. Other components are much newer and my power source is top notch.

Here's the machine on PC Part Picker. Should I just buy the same motherboard again? I mean, I don't have any complaints, I just happened to live by the sea back then, leading to premature failure. But it's still working. It's cheap, too.

I might be up for a better processor, but price is a concern. What would be the next affordable step from what I have now? In any case, the CPU is rarely an issue for any of my tasks, and the only game I play that could use a more powerful processor is World of Warcraft, which I only play intermittently anyway. Maybe it isn't worth it.

I'm getting a 1TB SSD, those seem to have gotten much cheaper since 2022!

Because, unlike me, most Tildes users are in the US, Canada, and Europe, when taking prices into account, multiply them by 5 in your head to have a sense of what that expense means in my country.

Thanks!

The machine will be a laptop.

So let's say I'm doing this on Antix Linux or MX-Linux, which are both based on Debian. I already set up everything that I want. Now I wish to make that installation incapable of accessing the internet ever again -- even if I want it to. However, I wouldn't want to achieve that in a way that will negatively affect any application I might need. How can I do that?

You may be curious about my motivation. It is simple: that machine should be only for writing and nothing more. Maybe I'll use YLINAT, @Areldyb's Timasomo project.

For the purposes of my usage, it is nothing more than an electronic typewriter with a screen. That is a drastic measure but I have ADHD and I need to write. I'm afraid that if I don't do something about it I'll see myself in a difficult situation regarding deadlines. I'll just take the laptop with me to a quiet place and leave the cell phone at home.

Every day I will take my writing off the laptop via USB and back it up.

Hesitating between posting this as a comment or a topic but here we are.

While reading this Tildes post (and the blog post) about tiny undervalued hardware, a curiosity sparked in my head.

How do you organize and store your cables, tiny hardware, and other stuff? Mine are like a bunch of rat tails tangled up inside a plastic box.

I live in a small apartment (for now) and would like to hear your thoughts. And recommendations.

We don’t have to limit ourselves to just wires and cables. For example, I also have old phones, external CD players, etc.

Bonus points if it’s portable and you could travel with your “tiny hardware”.

Hi, I keep reading about this thing called a "NAS" and I don't have in my social network a bunch of reasonable geeks to figure out if this is something for me or if it is overkill and I can get by with less -- trying to be frugal and all.

The Situation

At the moment, I have a Raspberry Pi 3 (that a colleague gifted me) which runs Jellyfin, mostly for music. I'd use it for watching series and movies, but given how slow it is at transferring files and the fact that it has a 1GB (maybe 2GB) RAM... I was afraid to break it. On top of that, its storage is a years-old external hard drive.

I use Jellyfin mostly to have music on my iPhone. I can access it when I'm out and about on Tailscale. I hope to find a solution for my photos as well.

I'd also occasionally use the pi to experiment with some self-hosted open-source apps.

I constantly find myself wanting to upgrade because I want to also backup my important photos (with face recognition if possible) and documents "offline" (i.e. in my local network) to something more stable than an aging hard drive. They're all in the cloud, but a second backup option could be great.

What I understand from reading about NAS's is that I basically have one, it's just not... reliable?

The Question

I understand there is definitely a buy-in cost for buying an actual NAS, I'd like to know how much... so that I can make an informed decision on if and when I would buy it. What is an entry-level NAS and how much will it cost? What could it NOT do that an RPi could, and vice-versa? Am I missing an in-between or even an alternative solution for my use case? Is it overkill and should I just upgrade the pi? What are my options?

Thanks in advance for reading my post!

I've always been a speakers kind of guy because I'm not a fan of how bulky headsets are, but because of the fun of Zoom meetings and things, I've kind of gotten over my hatred of headphones. That said, I'd still prefer to commit to earbuds rather than big, bulky GamerTM headphones long-term. Instead, I'd like to pivot to earbuds.

So my first problem is: I've always been under the assumption that 2.4Ghz dongle is superior to Bluetooth, but apparently modern Bluetooth is almost/practically as good. If that's the case, I wouldn't care about getting a Bluetooth-only set, but that does mean dropping more money on a dongle for my PC.

My other caveat is that I hate having to pause what I'm doing to charge something. The only wireless thing I own is a headset I use for Zoom meetings and things, and it's a Arctis Wireless that can easily do 20+ hours without a charge. I would be using these for my weekly RPG that I run online, which is almost always 8+ hours long, not counting me watching videos/listening to music in the leadup to to the game.

So yeah, with that in mind-- low latency and battery life are my big things, and I don't care about a microphone at all, but I'd like it to be fairly budget-friendly. Again, it just seems like... since I last used headphones 15+ years ago, things have changed a lot and even just googling and reading opinions on reddit-- all the opinions are varying and often opposing on what I should be shooting for.

I don't care all that much about brand loyalty, or what color it is, or anything like that, either. So, what all would anyone here recommend?

I'm looking for a black & white laser printer with a scanner for home office use. The only fancy thing about it is that I'm running Linux and I don't want to install any driver packages from the manufacturer. I want to plug it into any laptop running any Linux distro and start printing and scanning with no fuss.

Brother printers are very popular, but if I search for any Brother printer and "linux", all I can find is stuff about the drivers and how to fix the various issues that come with those.

If I understand correctly, modern printers should just work via something called IPP/AirPrint and they should also work over USB. Is that correct?

What about the scanner? Does that also just work over IPP?

I do not like using mouse. I feel it disturbs the flow of things I am doing. Moreover, I like quickly pressing through a bunch of keystrokes that results in what I want. There is a sense of satisfaction in that.

For starters, I use Vim and love it. I liked it so much that all my browsers have Vim-like keybindings (through Vimium or Tridactyl). But that is as far as I have gone in making my life easier (apart from switching windows via Command+Tab, but for all else I need to use mouse).

I recently bought a MacBook and it is kind of disappointing that the keybindings are not so intuitive or don't exist natively as they do in Windows. For example, resizing the window was easier on Windows with Win+arrow. There are many such things I find lacking on Mac. Broadly, I am asking for what other improvements can I bring into better my keyboard-centric workflow.

Sometime this year, probably around the middle of the year or later depending on my welfare, I want to replace my two monitors with an ultra wide.

I do have some preferences, such as:

• OLED Preferably
• Built in KVM
• 120hz or above refresh
• Has the ability to show two separate computers screens at once. Just in case I'm not being clear, two separate computers are plugged in as inputs and it can output the display for both on the same screen by dividing the screen in half. I've only seen this feature on one monitor, an ultrawide ASUS one but that was roughly $2000. This is probably the most 'nice to have' feature.

Would appreciate any suggestions or recommendations. Thanks.

Also, I have two monitors I would like to sell when I replace them, these being an ASUS VG27AQ, and a Dell S2721QS. Both of them are in perfect condition, other than being slightly dusty. What would be a fair price to list them for when selling?

I like to write notes for work and sketch/draw in my spare time. I'm about to finish another paper notebook, and I noticed a few ads for the ReMarkable & decided to check it out. A few YouTube videos later, I'm now quite interested in getting an e-ink tablet to replace the notebooks I've been going through.

Thing is, with this type of technology I'm always a bit worried that I won't use it enough to justify the price. If anyone has one of those - have they managed to replace the classic paper/pen combo for you? Do you regret your purchase or are you happy with it?

If anyone is curious, I was specifically looking at the ReMarkable 2 and the Supernote Nomad. The ReMarkable seems to be the most popular choice, but I really like how the Supernote emphasizes repairability (notably, the battery is replaceable). I'm also very much open to other suggestions if you have any!

This was tempting to post in ~games but think it suits ~tech better.

What are your thoughts on these monitor frame sync technologies?
Have they made a big difference to your gaming experiences?
Could you do with out it?
What about G-Sync vs Freesync?

Yes, yes, I know, the classic blunder 😅

I just have to say though, the difference is insane, I mean what the actual fuaæosiuhrfjk!?

I have been on 60 hz screens my entire life, only upgrading to 1080p in 2015 or so, and I bought my current screen from a friend a year or two ago -- I guess that's why I never realized it was 144 hz, not 60 hz!? But playing WoW with another friend yesterday, we started talking about specs and refresh rates came up, so she even offered that I could borrow her second screen because she felt so sorry about my only having 60 hz. So for fun and just to be sure, I went to check my settings and yup, it said 144 hz in there! "Surely not", I thought... so I clicked it and absolutely surely fucking yes, it instantly looked a million times better??? I laughed so hard because it is both amazing and I am an idiot because I have seen this exact meme dozens of times and I cannot believe that I am a victim too 😂

The colors are so much richer, the movement of everything was so much smoother. I mean seriously, my mind is still completely blown now a day later. This is a great christmas present for myself, and it was free!

I don't think any other computer upgrade has ever had this big an impact. Blew my mind!

On most laptops I've had to deal with, Linux was at least installable and bootable, the only exception was perhaps the cheap bay trail tablets and notebooks released around the years 2017-19 that came with Intel Atom processors. These weird devices came with a 32-bit UEFI and 64-bit architecture, thus making it pretty much impossible to even boot with something other than the Windows 10 version specifically made for them. Legacy BIOS support wasn't there and Linux driver support was like terrible.

But other than that, based on my own experience, at least Dell laptops seem to have out of box support for Ubuntu and Debian. I think some even come with Linux or FreeDOS pre-installed.

And from what I've heard from others and online, Lenovo usually has first class support for Linux and especially the Thinkpad line seems to be a favorite of many Linux enthusiasts. Also heard some good things about Asus in this regard.

I don't even mind if the laptop comes pre-installed with Windows (guess the OEM has to do that in some cases depending on their terms with Microsoft?). All I want is that it should be relatively painless to boot to UEFI/BIOS, be able to install Linux and drivers for WiFi, Bluetooth, efficient battery life, etc. (which are pretty much necessary in laptops these days).

This link gives some useful detail about Dell Latitude model numbers.

https://en.tab-tv.com/dell-latitude-identification-and-decoding-of-the-laptop-model/

Unfortunately, it only goes up to 2017.

The first digit is the "series". There are several series, higher numbers are better.

The second digit is the screen size. 1=11", 2=12", ..., 7=17".

The third digit is the year. 1=2010, 2=2011, ..., 7=2016, 8=2017.

The forth digit is connected to form factor - standard, removable screen, transformer.

My question is whether there's a similar decoder ring for newer models.

EDIT:

Okay, so, newer models appear to follow similar convention, with slight changes to last two digits for year.

eg, Dell Latitude 9510 = premium ultrabook, 15" screen, released 2020.

eg Dell Latitude 7440 = ultrabook, 14" screen, released 2023

The first digit identifies the range:

• 9 = premium ultrabook
• 7 = ultrabook
• 5 = mid range
• 3 = entry level

The second digit is the screen size:

• 5 = 15"
• 4 = 14"
• 3 = 13.3"
• 2 = 12.5"
• 1 = 11.6"

The last two digits give the release year:

• 90 = 2018
• 00 = 2019
• 10 = 2020
• 20 = 2021
• 30 = 2022
• 40 = 2023

I'm in the market to hurl at a wall upgrade our badly ageing general use family laptop (Lenovo V110).

I've used ThinkPads in the past for work and due to their ubiquity there is a value to be had, I believe, in corporate refurbs.

However, it's been a good few years since I used one - think it was a T440 - and am looking for some advice on what the most recently obsoleted gen is that I should be looking for, or where people have found a sweet spot on price/performance. Any pointers?

Desk space at my home is very limited.

Right now I have a set of speakers hanging out behind my external monitor, but I'd really rather get rid of them entirely and just have the speakers/soundbar built-in to the monitor itself. It would give me a lot more room to work with because I'd be able to push the monitor back further on the desk.

Also, presumably (and correct me if I'm wrong here), having the speakers powered by the monitor and fed audio through HDMI would free up a lot of cabling clutter as well. My setup is already very messy (2 laptops and a KVM switch), so cleaning it up will give me some relief (my theme of 2023 is "Simplify").

I know nothing about buying computer monitors. When I look them up, I'm not even sure which type I should be looking for (IPS? OLED?).

I do plan to game on it, but most gaming-focused monitors seem like overkill for someone like me who will primarily have it hooked up to a middling 5-year-old laptop that plays mostly indie stuff. I do occasionally play the more intensive/prettier game, but those are usually usually far between and definitely not a priority that's worth spending a bunch to target. I tend to tank the graphics settings on games like that anyway to keep my laptop from becoming a cooking surface, and I'll take a smoother framerate over better eye candy all day, every day.

What are the trusted brands (if any)? What pitfalls should I look out for? If anyone can help point me in the right direction, I'd appreciate it!

My use case: general browsing and (mostly casual) gaming

My computer: System76 Oryx Pro 5 (2019), NVIDIA GeForce RTX 2070 Mobile, Pop!_OS 22.04

My budget: ultimately whatever is necessary to get a quality product, but hopefully no more than $300 USD or so?

Preferred Size: 24" -- absolute maximum I could do is probably 27"

Key Feature: built-in speakers or soundbar

Let me know if there's any other key information I can provide that would help.

Questions I Have:

• Will buying a higher resolution monitor (e.g. 4K) tax my graphics card more because it's rendering at a higher resolution, or can I just scale down the display resolution to something less intensive?

• Same question as above, but for refresh rate.

• Would audio be transmitted over HDMI, or would I have to have a cable from the headphone jack (or some different method I'm not aware of)?

I'm hoping I might have some recommendations for a computer chassis. So far I've gotten away with using a couple of Fractal Designs, even got my hands on an old Cooler Master XB Evo recently that I never got to put into use.

Basically, I'm looking for a chassis with something like 6-10 hotswap 3.5 drive bays. Preferably horizontal, but vertical is begrudgingly acceptable. Are any of you aware of such a chassis, or am I forced to start looking at racks instead?

Alternatively, do any of you have experience with hacking together a case and installing drive bays?

Bit unrelated side-note: The front micro-jack in one of my cases has broken off (headset wire looped around the office chair) and Fractal Design wouldn't sell me a replacement. Any idea where I might find a female audio connector? I'll happily do a bit of soldering if necessary, I just don't know what the part called or where to look for it.

Edit: I changed some windows settings based on advice here. The situation is improved and I am going to see how things go before buying new equipment. Thank you everyone

So I recently bought a new laptop. I use an external mouse, keyboard, headphones etc, all of which come with usb A connectors that worked well with my old laptop.

When the new laptop arrived there weren't nearly enough ports for either usb A or usb c so I invested in a peripheral that links four usb a connections to one usb c connection on the laptop. Edit, it is powered and plugged in. Now the connection with everything plugged in seems to be intermittent and the mouse and external keyboard don't work reliably.

I have read a couple of articles and I am even more confused but they seem to be saying that usb c is not plug and play the way usb a was. What the fuck. Why do this like this? What do I do now?

I just spent significant money on this computer and I don't want to replace a functioning mouse and keyboard