My nephew and I like to play games together, and we're always looking for games that we can play together. I was manually looking through my Steam library today and wondering how to go about finding stuff that we may already own that we could play together. Is there a tool for that? Or maybe something that could suggest a game for purchase that we would both enjoy based on our history?

Also feel free to drop any general game library organization tips here. I found this tildes thread from a couple of years ago and I've already seen some cool ideas and tools.

Despite everyone else in the family being right handed, my son is a leftie! Very excited for this development, but as we're nearing school age at 5, I'm wondering about the things he uses daily.

Seeing him cutting with right handed scissors, I'm getting him some left handed ones. What are other common items I may not be considering that are just so much easier to use the left handed version of?

Hi, I need to re-terminate a couple of wires I do not wish to replace entirely. I'm thinking of just buying a cheap Klein crimper but is there a reason to buy something more expensive? If somebody with experience has any recommendations here, I'd appreciate them. Thanks.

Edit: thanks to everyone for their prompt replies! I will go with your consensus of no need for an expensive tool right now.

I really like this instructional video. I even downloaded a copy. The copy I downloaded is as blurry as the copy on YouTube.

Is it possible to possible to sharpen my copy of that video?

If it is possible, can it be done with freely available software on Linux?

Thanks either way.

Hey everyone,

I'm currently getting close to releasing a piece of software and I think that engaging users and collecting their feedback to inform the development of future features is valuable. So, I am currently evaluating different specialized solutions to see which one is best.

Does anybody have a preference for a particular tool, or otherwise know which tools are the best in terms of functionality etc.?

Thanks in advance for your input!

I'll go back to comparing options and I'll check back in here later on. Have a nice one.

Edit: To clarify, I am looking for an end user-facing tool for a (currently closed-source) SaaS (I may eventually open-source it, but I'm a bit on the fence-I would have to weigh the pros and cons).

I have a relative whose 8 year old has shown a keen interest in coding. He even takes books out of the library about coding even though he's never done it and I dont think he understands most of what he's reading. Seems like a little Bill Gates just dying to get started.

I used to teach LOGO to kids back when the dinosaurs roamed the earth and I looked at some recent versions. Its good, and the logic is all there, but the end results are fairly mundane for a kid who's already experienced amazing video games. Then I stumbled across Scratch, a much more visual programming tool and it seems to fit what we need. Scratch allows kids to make animations, simple games, even do motion detection, music all with sprites that they can manipulate using drag and drop coding blocks. Lots of online video tutorials that he can follow himself too. https://scratch.mit.edu/

Before I dive headlong into Scratch, just wondering if there are other even better tools for teaching coding to kids? Or what your experience might be with them?

I have a teenage child. They're going to be doing "design and tech" at school, and they've shown an interest in light maker / builder projects.

I want to put together a small toolkit for them.

The difficulty I'm having is that when I look at precision screwdrivers I pick a Felco set for £80. For regular screwdrivers I pick either Felco, Wira, Wiha, or Sandvick Bahco. This is probably a bad idea - they're going to end up with a lot of very expensive kit that they will not appreciate yet.

The other thing I'm struggling with is knowing which bits of kit are essential and which are nice to have.

I'd be really grateful to hear your thoughts about this kit. I'm especially interested to hear discussion about balancing "good enough" with "avoid garbage" -- I do prefer to spend more on quality rather than buying cheap buying often.

Screwdrivers:

A handle and a set of bits to fit the handle - £10
A set of weird bits (security, hex, torx) to fit the handle £5
Screwdrivers - pz1, pz2, 4 flat head screw drivers in sensible sizes (still working this out) (probably stanley FatMax) - £30

Snips - they're getting my Bahco snips and my ancient lindstrom snips. I want to get them something they can destroy through misuse, so I'll buy something for around £15

Pliers - needlenose serrated pliers £10
Pliers - big pliers - they'll be getting my ancient RS pliers.

Wire strippers - I like the scissor type that have a range of holes. A nice pair is about £20.

Wrenches and spanners - I have three adjustable spanners in different sizes. I'm looking at micro-ratchets, so something like Kerr or felo (xs33) (but the felo is expensive!!) or Bahco 2058/S26 for £20

Soldering iron - I'm super tempted to just get Hakko's intro model for £100-£150. But I don't know whether I should go instead for some cheap thing like tenma. My own preference for me is strongly Weller - I used weller irons for decades and they were so solid and robust for what I was doing, but not a great choice for tinkering about. I'm struggling to understand the build quality of Tenma bought from a reputable company. I don't want my child fixing things in a mains powered box.

I need a tool box to put it all in.

I need some kind of cutting and filing tools - cheap set of files and a little handle.

I need some measuring equipment - I don't know whether to include a nice set of steel rules or a cheap digital calliper.

Alongside all this there will be a dremel multitool and some useful accessories for it.

And also safety equipment - dustmasks, eye protection (from a reputable supplier!!)

What tools do you use to make maps for your table?

I've tried looking and I have found a few decent generators, but I'm really looking for a making tool I already have a general layout in my head of what the city/region/continent but I can't draw for shit, and I want to find a tool that makes this easy? Makes it look nice, makes it easy to add points of interest and features, etc.

What do you use?

Edit: for clarification, this is for city/region maps, not battlemaps.

Basic Household Tool List

(Edited to add suggestions from the comments and the general philosophy of this list)

• Tool bag (at least 15 inches long)
• Hammer (12 or 16 oz)
• Rubber mallet (white head preferred, non-marking)
• 6 inch Needlenose Pliers
• 8 inch Slip Joint Pliers
• 8 inch Crescent/adjustable wrench
• 10 inch Slip groove (large jaw) pliers
• Box cutter (optionally folding) + set of replacement blades
• Hacksaw + spare blades
• Scissors
• 25' Tape Measure
• Set of precision (small) screwdrivers
• #1 and #2 Phillips head screwdrivers
• Small and large straight blade screwdrivers
• Multi screwdriver with torx/phillips/straight blade heads
• half-round file (h/t @patience_limited)
• a metal putty knife or a 5-in-1 combination paint scraper (h/t @patience_limited)
• roll of twine
• roll of blue masking tape
• roll of Gorilla tape
• roll of black electrical tape
• super glue
• small bottle of wood glue
• 2" paint brush
• torpedo level
• small flashlight
• a strong neodynium magnet - to use as a stud finder and for many other things (h/t @the_man)
• 9v batteries
• AA batteries
• AAA batteries
• 50 1" #6 wood screws (zinc/steel, not brass)
• 50 2" #8 wood screws (zinc/steel, not brass)
• small box of 1.5" finishing nails
• light and heavy duty drywall anchors
• course and fine foam sanding blocks (h/t @patience_limited)
• 5 gallon bucket
• safety glasses
• N95 masks
• leather work gloves
• foam ear plus (h/t @the_man)

Bonus list (things that are more expensive or nice-to-have upgrades):

• a stud finder - the cheap ones are worthless, buy a good one or not at all (h/t @DeaconBlue)
• a battery powered drill + bit set (h/t @patience_limited)
• a set of metric and imperial allen keys (h/t @sublime_aenima)
• a basic socket set with a mix of metric and imperial sockets (h/t @auk)

The philosophy of this list:

A good starter set should include tools and supplies someone will be glad they had that they didn't know they needed. Even if they aren't "handy", a handier friend might use them (and they learn something in the process). It doesn't include very specialized things like demolition, electrical, or plumbing tools. If you're going to undertake projects in those areas, you should know a little about what you're doing, and you'll be able to buy the right tools for the specific project. As as electrical engineer, I particularly don't include a multimeter because I don't want to encourage someone to mess around with electricity if they don't understand how it might hurt them.

This list specifically does not suggest brands (except where the brand is the thing, like Gorilla tape). Opinions on what brand is best vary widely, but my general suggestion is this. Don't break the bank buying high end tools for someone who may never use them. A $2 hammer is going to be fine for someone who uses it once a year. If they are using them often enough to want something better, they can buy something better (or you can buy it for them).

Hi, I have a weird cubic space in my garage wall due to the location of the chimney and stairs to the basement.
The lower edge of that cubic hole is at 41 inches (104 cm) from the floor. Its deep is 40 inches (101 cm). Width 39 inches (99 cm). Height 46 inches (117 cm).
Too deep for static shelves, I cannot reach the end. Too tall for sliding shelves (kind of drawer thing), I am 5'7'' (172 cm). In its current form, it is too much of a space for its practical use.
I thought that a carousel that moves shelves up and down (like in this design for shoes https://storagemotion.com/shoeselect/) but for heavier weights would be practical... I have no idea how to even name the parts to buy them, if they exist.
Also, I will appreciate suggestions for an alternative solution.
Thanks.
PS: located in Massachusetts, US.

I am putting a new surface on my Deck. I am using Trex and 2.5" composite specific screws. These are small head screws with a T20 torx bit.

[img]https://i.ibb.co/MchtXPx/20230628-175119.jpg[/img]

I am 7.5 boards in out of 25 boards and I have destroyed 5 bits, 3 of them brand name impact rated bits. I am making sure to stay cammed in, and weight on top of the screw. I am lining the drill up with the angle of the screw. I am also predrilling every hole.

I feel like I have to be doing something wrong. I just don't know what else to do.

Edit - these are the exact screws I am using - https://www.homedepot.com/p/Grip-Rite-9-x-2-1-2-in-Brown-Star-Drive-Pan-Head-Coarse-Composite-Deck-Screw-10-lbs-Pack-N212CSB10BK/207193648

I'm curious what people have made with the assistance of any of the new AI tools.

Let's skip low-effort things like asking ChatGPT to generate an essay and posting it as-is. But besides that, if you made something you think is cool, post it here.

My university friends and I (and everyone's significant others, so about ~15 people) are planning a big catch-up trip, which will also be the first time to the country where I live for all of them. Planning has been a little higher friction than I expected, because we want to coordinate travel times to specific cities ("let's spend 4 days in City A, then all go to City B" etc), but people also have specific activities only they want to do (scuba, theme parks, etc) within each city. However, there's way too much to choose from and there's no way we'll do everything that everyone wants to do.

So right now to gauge interest in specific cities and attractions within them, we are just using a private Facebook group where people just make an idea as a post and people vote by liking it, and people can discuss the place in the comments. Things that we have fully decided are just placed on a spreadsheet. This process works but it doesn't feel great.

I've also explored Wanderlog, and I really like the fact that you can easily search for stuff and then place it on a map, but unfortunately its UI doesn't really support "branching" trips where some people will do different things on a given day.

What tools/processes have you had success with when trying to coordinate a big group trip?