EDIT: Post-locked topic

I didn't get the chance to reply or explain myself, ironically, as I posted this topic last night and then woke up this morning to 42 comments this topic being locked.

In short, I didn't want to block swearing from Tildes, I just wanted to find out if there was a NSFW filter, as I had my first one pop up in the feed yesterday. Reddit and other sites allow you to block NSFW content from the get-go. And yes, it is the minority by far on Tildes.

As for the swearing, I don't know why I assumed that the NSFW would remove that, I must have been tired when posting this topic. (And yes, I know that this is the internet and it's filled with non-friendly content, so it is naive to expect otherwise, sadly.)

I guess it would just be nice to have a place where you can have both great quality posts (such as on Tildes), as well as the comments be free of some unnecessary, low-quality words. I think Twitter and others allow you to block some words or topics.

I apologise for @Deimos that he had to step in to bring the peace, I didn't mean for this to happen. And apologies to the community for bringing any unrest. This was never my intention.

Hi everyone, only been on Tildes for a few weeks now.

First off, I love the quality of the content and the community's camraderie.

The only question is whether there is a way to filter NSFW, adult or profane comments. There is such great content on here, with amazing contributors, but sometimes you just get the people who like to use profane language like it's an adjective, and it has no place in the topic or discussion. I know we can't block people, but is there a way of filtering out such content, comments, or users?

I tried to use Gnus to set up some rss feeds about a year ago, and I became more than frustrated: I was actually confused.

So here are a couple questions I don't even understand where to ask or whether they're relevant or being asked in the right way:

Are most newsgroups mirrored? And along those lines, is there one particular newsgroup server that would be sufficient for most users?

Can I post to a newsgroup in the same way I would post to a mailing list: send an email somewhere? Where do I send that?

What even is NNTP? Someone literally sent me the spec for the protocol, but I don't think they actually wanted to be helpful: I felt like they were putting me down and intentionally not answering while giving the appearance of being helpful. Is it actually something I need to understand to use Gnus effectively?

If you're familiar with newsgroups, I would surely appreciate your knowledge.

The legal discussion is not exactly the same as US politics. I would imagine that we have people who would like to follow it and people who prefer strongly to avoid it.

For example, today we had these two events and I didn't even look hard.

https://www.thedailybeast.com/barricades-go-up-around-fulton-county-courthouse-as-trump-indictment-looms

Superceding indictment filed in Florida documents case
chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://storage.courtlistener.com/recap/gov.uscourts.flsd.648653/gov.uscourts.flsd.648653.85.0_1.pdf

A very newbie question to which I'm having a hard time finding a clear answer (and I don't want to read a dissertation on how the stock market works).

I'm planning to sell my FZROX (FIDELITY ZERO TOTAL MARKET INDEX FUND) shares.
Fidelity states "This trade will be completed at the next available price.".

Does this mean the estimated value could be much lower than it currently is when it "sells"?

e.g. Currently priced at $10,000 when I put in the order to sell, but sold on next pricing when value drops to $7,000 because market.

Sorry for seeming like a total idiot but I cannot find the process to change my text color when I type a message.
I checked this site and did some online research with the Markdown system itself which is new to me.
It appears that there is some kind of code insertion but it's unclear how to format.
So many of you are advanced computer users and I am just your traditional semi-fluent poster.
Any help would be appreciated.

Hello! Tildes newbie here. I wasn't sure if this is a bug or if it's working as intended, so I wanted to ask.

I unsubscribed from https://tildes.net/~sports but noticed that I still saw a post from ~sports.hockey in my home feed. It took me a while to figure out that I also had to go to each of the ~sports subgroups and unsubscribe from all of them too. Am I doing this correctly or did I miss a button somewhere that would let me unsubscribe from a parent group + all its subgroups in one go?

Thank you!

--- EDIT ---
Thanks to everyone for the replies! Confirmed that it's working as intended. And there is now a new post by cfabbro on Gitlab suggesting that "unsubscribe from all subgroups" be added as a new function.
https://gitlab.com/tildes/tildes/-/issues/802

I’ve been running into a minor annoyance of late, I tend to get logged out of ~ on a page refresh (I.e., pull the screen down) on iOS after about a day or less. I have also noticed that my outlook web also does a thing where it seems to forget that I’m signed in under an account, and asks me to input an email, but if I refresh, there’s a 50/50 shot it will see I’m logged in and drop me into the outlook web client.

I recall some of these threads from a few years ago here (but having issues finding them in search) and seem to remember the consensus being “check your add-ons”…. But this is happening on the super nerfed Firefox for iOS (I.e., there are no add-in’s to my knowledge).

I’m running Ffirefox 115 if that helps at all

I thought I could get away from "what [general topic or icebreaker that 99.9% of people have an opinion on]?" questions by filtering out ask.survey, but that seems not to be the case. There are still quite a few that are being considered just "Ask" questions, and not "surveys". Are these not being categorized very strictly, or is my notion of an ask.survey question mismatching that of the moderators of Tildes? Or is the ask/ask.survey distinction up to the poster, and not moderators?

I come to Tildes for articles on specific subjects, not ocean-wide-open questions that generate maximum participation froth. I might have to start filtering out ask as well (as ask.survey), but I'd rather not have to do that. If people ask "what [specific problem or specific topic]" questions, I'd be interested to read them.

This thread is officially retired. Please see the new version to ask any new questions.

We have a lot of new users joining the site. Welcome to Tildes!

This thread is for you to ask any question you have about the site, from “what is the moderation philosophy?”to “what does that blue line next to some comments mean?” to “what is the general vibe like here?” Tildes has a lot of documentation, history, and embedded social norms that can be daunting or opaque at first glance, so here’s your opportunity to get help with anything you need.

Questions about anything and everything are fair game. Follow-up questions are encouraged! No question is too simple.

Also, a quick note: the only person who can speak in any official capacity on Tildes is our admin @Deimos. Everyone answering who is NOT him is just a helpful community member!

EDIT: To be clear, is perfectly okay to ask any question — even if you think it’s been asked before, or even if you didn’t search for an answer beforehand. There are an overwhelming number of comments here to sift through, so don’t worry about trying to read all of them. Just ask away, and someone will answer you!

I've noticed that there are primarily text posts with some links thrown in, and I do like the "real" conversation that it brings, instead of the shitposting that ends up all over Reddit.

I was curious, though, if there were any plans to add a ~pics or something similar. I know the goal of Tildes isn't to be a true Reddit replacement of course, but I wasn't sure whether image boards were planned or were being left out to help encourage actual discussion.

I understand there are no plans to develop an official app, which is understandable to me as that would require a lot of time and resources for a project like this.

But it's clear that there are lots of devs eager to chime in and create an app by themselves, just like they did for Reddit. There's even one iOS app already in progress, although it relies on HTML parsing to retrieve the data obviously.

So is there any official stance on this? Why not publish the API and let the community do its magic? Any thoughts?

Unless I'm missing something, it seems if I subscribe to parent group but not its subgroups, the topics from subgroups still show anyway. Back when they were just tags at least I can use filter but that doesn't work anymore. Is it just me or isn't that the opposite effect we'd expect from subgroups?

Edit: Everyone explained that it's a bug. I'll just need to be patient then.

See this image.

Which groups are unsubscribed? All of the ~sports.X groups are unsubscribed, but american_football, basketball, football, and motorsports have been visited.

The link-visited colour set by a.link-group:visited is taking precedence over the default colour otherwise set by .group-list-item-not-subscribed a.link-group, hiding the colour change associated with -not-subscribed. This is particularly troublesome when unsubscribing from a group, since one must go to the group's page – visiting the link – in order to unsubscribe.

With the introduction of the new groups, I now, for the first time, have unsubscribed from some groups here on Tildes. I've been subscribed to the fire hose feed in my feed reader, but I'd love to get a feed that is personalized with only my subscriptions. Does this exist? If not, could it?

Apologies if this isn’t the right place to put bug reports.

I’ve noticed an issue where comments which are bookmarked don’t display as such in my notifications.

For example:

A bookmarked comment displaying as Unbookmarked in my notifications.

Is anyone else seeing the same ?

This morning I was asked to find an archived email with photos of some scientific equipment. I searched "Powerlab," the name of one of the instruments, in gmail, and the email came right up. Great! But then I noticed that the word "powerlab" never appeared in the text of the email. I tried searching "ML206", an arbitrary character string from one of the photos in the email, and again, the email appeared in the search, without the search phrase highlighted in the search result, as it normally would be. I tried different phrases from jpgs in emails; not all yielded search results but some did.

I'm not happy about this. I accept some compromises to privacy when using Gmail, but sending text as an image can be a way of specifically avoiding information being harvested. All I ask for is a way to turn it off.

Can anyone replicate this? Did anyone already know about this?

Hi, I was wondering if the current duration before voting gets locked on a post is still 30 days? I tried to find the answer in the docs but didn’t see it (apologies if I missed it) and all I turned up in a search of the site was a topic from 3 years ago mentioning the 30 days, so I wanted to see if that’s still accurate.

Thanks !

I cannot push nor pull to/from my local repo to/from my remote. I get the message "Your branch and 'origin/main' have diverged", etc.

I will be able to fix it, I'm already in the process of refreshing my memory on how to rebase this cleanly.

But ... I am the only person working on this. I have only one local and one central/remote repository. And I never made a branch.

It's just me, working on one computer, right here ... make a few commits locally, then push 'em ... make a few commits locally, then push 'em. That is my entire workflow.

How in the hell did I end up with "my branch" (???) and the origin/main branch being in conflict with each other?

Any Git gurus care to take a stab at this?

Thanks in advance.

Edit, more info:

I am guessing here, but for awhile I was working in a VM on my local machine ... but Android SDK is too much of a resource hog, so I committed and pushed everything on the VM, shut it down, and then pulled latest down to my actual machine ... or at least, that's how I remember it.

My working theory is that, somehow, I screwed up that "switching between machines" process, although, so far, no clue as to how/why I did.

Theory #2 is that Android SDK did something sneaky/stupid behind the scenes -- my last several commits have been done through the Android Studio IDE, not directly in the terminal.

Last Edit:

D'oh!

Found it. I made a couple of "quick changes" to the project's README.md file directly in the remote forge, and that's what screwed me up.

I just noticed that when I sent an invite to family member over SMS it never arrived. After experimenting it looks like if text contains "tildes.net" it is filered. This also happens with another family member's phone. It is weird why would those companies want to filter it.

I also checked and the message didn't show up in spam & blocked. Does anyone else observe the same thing?

I lurk here at work and don't watch YouTube in general. Often it's annoying to see something of potential interest and it's a YouTube video. Is there a way to filter youtube.com here or an extension enabling that functionality?

Thank you.

I never noticed this before today, but I don't seem to be able to search for comments. Is that supposed to be doable on Tildes?

It took me way too long to figure out that the links at the top of the search results page are sort options; I had been clicking "Comments" hoping to see comment search results, and I was a bit confused why only full topics were still being listed. I guess comment search doesn't currently exist?

So, I'm using Arch i3wm. I have multiple copies of my /home/username (I am the sole user), and I have a "Spare" drive with media, games, and other goodies, some of which are also stored on partitions on the m.2 in question, but they have backups.

And the reason I ask this question is because while I've had my m.2 fail at the end of '21 (I didn't even know that was a thing, but it barely lasted a year, and things are acting shoddy now... though the original failed without a warning), I just bought a second m.2 for my games. I guess I could swap most of the whole thing over, but I know the boot partition is easier just rebuilt from scratch... which I had to do last week.

Ultimately, what's making me suspicious is when I upgraded to the new drive and unplugged all my non-m.2 satas, I also added some memory and a new power supply. But then after the upgrade (Monday of last week, so the 5th), the system wouldn't boot up. I used a usb to troubleshoot and my /boot partition was apparently no gouda. I redid that, and everything was fine... until this week. Then my new Games partition (basically the new drive) failed fsck and it got stuck in a boot loop on Tuesday. I could boot emergency to root, but not skip the fsck and keep the Games disk auto mounted (I know I changed something to randomize fsck on bootup, but that's something I'm still kinda looking into how I managed...), so I just removed it from my fstab and it booted fine. For two times. I just manually mounted the drive, all was great, then my SO sent me a screenshot today while I was at work stating that my / partition (on the older m.2) apparently rebooted because it bypassed my screen lock, and was stating EXT4-fs error, reading directory lblock:0 and whatnot.

So, that's my history on what's going on, and if anyone can offer any advice [mostly] on the backup stuff, though as I said, /home and the important tangible stuff is saved, but if you also have any input on something more than I suspect the drive is failing (since the /boot partition and now the / partition are crapping out), please feel free to share.

(Also, thanks for letting me in. This is what I'd typically post on reddit and probably have to repost 10 times depending on the sub to get the right keywords and tags and yes, I already searched the internet but my search will not match yours... sigh)

How does Mullvad removing port forwarding affect an Unraid setup using deluge-vpn container?

I don’t access my server from outside my network and just use a basic binhex deluge-vpn docker setup. Any issues I’ll have here?

Currently out of town and won’t be back until after this change happens tomorrow. Curious what to expect when I'm back home.

Apologies if this is the wrong place to ask this question, but is there a way to search which would list comments made on any topic in chronological order regardless of how old the original post was made? Meaning, even if a post was one of the first on Tilde, if someone commented within it in the last few minutes, it would be displayed before a newly created post that hadn't had a comment in several hours.

I tried all of the sorting options and didn't seem to find one that performed this function. Any assistance would be appreciated.

If I have a quick Tildes dev question, where should I ask it?

Hi all. On my Pixel phone I have the accessibility option for font size and display size turned up a notch or two but noticed that not all of the text in Tildes adheres to this. Some front page topic text is bigger, some of them remain small.

Is this something that can be quickly tested and fixed if it's a bug? It might drive poor sighted people away from the site.

I'm assuming it's not me, as my Pixel 7 is quite new .... but I am on the Android beta program.

Can anyone else try and see if it's a localised issue or more global?

I can post screen shots of needed but not sure what image sharing sites you prefer to use in here!

Edit:

Fixed with a chrome flag....

the text-scaling is being replaced by the "Accessibility Page Zoom" feature (currently hidden behind the feature flag in chrome://flags)

Kids or younger reader book. Fantasy genre.

In this book world weather can be controlled by sorcerers, and especially powerful sorcerers can summon dragons. When the sorcerers die the dragons vanish, except in the case of the most powerful sorcerers where their dragon is buried with them. The villain wanted the scales of the blue dragon that belonged to a sorcerer. There were also weather spells that were too destructive and were trapped, including the scarlet snow that made people fall asleep. The villain was holding the main character's parents hostage. The main character can summon a dragon. The main character is going to school to become a meteorologist

Other key words that may or may not be the same story -- Yeti, ball lightning, jar, lab, gardening supply shop

I have to preface this question with a disclaimer that I am an eager learner of Linux and servers in general, but I'm still a beginner and often run into roadblocks.

Current setup:

• Raspberry Pi 3 with Adguard Home acting as primary DNS
• unRAID server with Adguard Home acting as secondary DNS
• About a dozen other containers running on same server
• DHCP is handled by my router

Goal:

• provide local DNS names for the containers running in unRAID so I don't have to enter IP:Port (e.g, calibre.local) which also has the side benefit saving the various username/password combos into Bitwarden with an actual domain attached to it instead of 14 occurrences of 192.168.x.x

Additional info:

I had PiHole running on the Pi before as the primary and only DNS previously. And I seem to recall you could put IP:Port as a custom DNS and have it resolve. AGH does have a feature for DNS Rewrites but it does not allow for port numbers, IPs only. I switched to AGH because it seems to be more effective at blocking ads, which is likely more a function of the provided DNS blocklists out of the box as opposed to what I was doing in Pihole. I would prefer to stick with AGH for adblocking/DNS if possible.

I looked into just modifying host files on the main computers I touch these apps from, but again, can't include port. What is a good solution for this? Preferably something approachable for a newb like me.

I may be asking a dumb question or going about this wrong but I'm not sure what to do here.

So right now, I receive an estimation from one company in a PDF. It has a bunch of fields such as customer name, product, address, etc. Then I type that data and put it into Excel, where I add additional data that I have. From there I have a second PDF which has form fields that I fill with the data of the Excel spreadsheet.

My problem is with the first PDF that I get from this other company, unless I am doing something wrong I am unable to get that first PDF to show the data as fields. If I convert the first PDF into an Excel then the table data is very messy.

The amount of typing or copy and paste that it's not hard but it is time consuming. What is the best way for me to go about doing this? I've been Googling things but I'm not sure the right words of action I'm looking for.

I hope this all makes sense, but if not please ask questions and I'll do my best to try and clarify further.

I have the "collapse old comments when I return to a topic" setting turned on, but I can't quite figure out how it works. For example, when open a new topic for the first time and scroll through the comments, the next time I open the topic, they're all still open.

Does anyone have more details about how this feature works or how I should be using it?

Thank you!

My phone used to autofill the 2-factor SMS verification codes used when logging into a site. I can't remember when or why, but suddenly it doesn't appear, and I have to... (gasp) type in the SMS code manually.

SOLVED:

Autofill SMS codes only work with Safari.

A lesser known feature of Tildes that is VERY useful:

You can ignore any topic on Tildes! There are two ways to do it:

• From the main page, click Actions ▼ then Ignore this post

• From the topic itself, click Ignore

The topic will leave your feed, never to be seen again (unless you want to or made a mistake, in which case you can see it under Your ignored topics on your user page and remove it from your ignore list).

Use this to cut down on clutter from your feeds by eliminating high-activity topics you are not interested in.

It will also mute notifications from that topic as well, so it’s a good way of disengaging from a conversation if you wish.

I saw a few longtime users in other threads who were unaware of this feature until today, so I figured I’d make the PSA.

Go ahead everyone, try it on this post!

Ignore it, PLEASE!

For many they are considered ~hobbies so ~hobbies.cars and ~hobbies.motorcycles would be a logical place. I don't know if ~transport would be a suitable main category for this since then trucks, tractors, trains and boats could also go there without bloating hobbies' sub-groups too much.

I'd like to hear your input on this, cheers.

I tried to register here the other day with my preferred username, which was taken, so I replaced an S with a 5 as I've done in the past. Now I realize that might have been a bit deceptive - someone reading my comment might think it's coming from the other user or vice-versa, and I don't want to be that guy. What's the vibe here about that? Should I invite myself under a new name once I'm approved for invitations, or keep this username? I'd just DM the other user if that was an option on tildes.

edit: Thanks, all! I'll keep it until/unless the other user feels strongly about it.

Hi all, first post so hope I do it right.

I just read the Tasker post and thought I'd post a question/request here about it.

On my old Samsung S21 I wrote a simple Tasker script that detected a change in volume on one of the sliders, eg Media, and then adjusted the others, IE System, Notification and Call, to match with a little check, ie %VOLM neq %VOLR.

It worked fine in my Samsung but goes all over the place on my new Pixel!

Has anyone else seen this or can post something that works on Pixels? Or maybe my scripts need some work!

The trigger is variable set, IE VOLM, and the actions are to set the other 3 volumes to VOLM if they are not already set to that. And I have 4 of those, one for each variable.

And advice appreciated!

Current Library: built in sqlite
Current db: sqlite (but will have access to Snowflake soon for option 1 below)

Wondering if anyone here has some advise or a good place to learn about dealing with databases with Python. I know SQL fairly well for pulling data and simple updates, but running into potential performance issues the way I've been doing it. Here are 2 examples.

1. Dealing with Pandas dataframes. I'm doing some reconciliation between a couple of different datasources. I do not have a primary key to work with. I have some very specific matching criteria to determine a match (5 columns specifically - customer, date, contract, product, quantity). The matching process is all built within Python. Is there a good way to do the database commits with updates/inserts en masse vs. line by line? I've looked into upsert (or inserts with clause to update with existing data), but pretty much all examples I've seen rely on primary keys (which I don't have since the data has 5 columns I'm matching on).

2. Dealing with JSON files which have multiple layers of related data. My database is built in such a way that I have a table for header information, line level detail, then third level with specific references assigned to the line level detail. As with a lot of transactional type databases there can be multiple references per line, multiple lines per header. I'm currently looping through the JSON file starting with the header information to create the primary key, then going to the line level detail to create a primary key for the line, but also include the foreign key for the header and also with the reference data. Before inserting I'm doing a lookup to see if the data already exists and then updating if it does or inserting a new record if it doesn't. This works fine, but is slow taking several seconds for maybe 100 inserts in total. While not a big deal since it's for a low volume of sales. I'd rather learn best practice and do this properly with commits/transactions vs inserting an updating each record individually within the ability to rollback should an error occur.

Edit — thanks to all who replied and educated me on this. I thought I'd do this rather than pollute the thread with single thank you posts while I learn the ropes here.

Hi,

I'm brand new here so this could well be answered and I'm just being stupid. Very probable tbh!

I'm on a macbook and iphone and one thing I noticed was it's a bit of a trek scrolling down to comment. Not that I've done that much.

Now I love, really love, the lightweight and speedy nature of this site (and incidentally looking forward to brushing up on my Markdown) and am hoping that with the influx feature bloat doesn't happen but would a small anchor text link somewhere up top be in order to quickly get to the comment field?

Let me know how idiotic I am and why or.. if I'm lucky.. how much of a genius I am!

Thanks,

Rodney

I have the following on my fonts.conf

<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<fontconfig>
  <alias>
    <family>system-ui</family>
    <prefer>
      <family>FreeSans</family>
    </prefer>
  </alias>
</fontconfig>

But when websites use font-family: system-ui firefox just ignores this and uses Cantarell anyway, which I don't even know where it is getting it from. (Not Firefox font preferences).

Any idea how to make firefox respect my fonts.conf?

This is Linux with i3.

I'm guessing that it might just be that Tildes is an English only site, but as an avid language learner, I'd love to have a place to see and post non-English discussions.

Is there a best practice for making a non-English discussion? Is it simply not allowed? Is it allowed but discouraged?