I need to overhaul my home network.

I have a house on a lot that is ~60 meters by ~15 meters. my house is on one side and my garage is on the other, I have a little "studio" building in the middle.

I had relayed the signal around with 4 google/nest wifi mesh things for a decade or so. but I always felt locked out without even a web interface, just the home app. and then two of them died at the same time last month.

I ran some cable last weekend. Now I have 3 roughly equidistant wired switches wired together :House-Studio-Garage.
My current plan is just 3 wireless APs at each. I have a wired only brume 2 that i can use as the router.

I want to be able to have one SSID and roam between them. how well can that work without a mesh type network? just 3 good APs? My phone would stick to one before the mesh network. but that was a long time ago. Im hoping modern protocols might be better?

We have teenage kids, lots of phones and laptops plus wireless home automation devices, shelly switches, wyze cams, smart bulbs, etc.

I'm looking for something open source and as configurable as possible. I'm going in a linuxy direction lately and looking to have more direct access and control of my hardware. That's why I thought to ask here.

Claude and co have recommended:

Zyxel NWA50AXPRO
Cudy AP3000
Omada EAP670

After I pick an AP I also need to pick a switch. I used the old 3 switches I already had on hand: TRENDnet TEG-S82g, Netgear GS105, Netgear FS108. All 3 are unmanaged and one is 10/100. so I want to replace at least the slow one. I'm thinking of getting a managed switch with POE for the switch that connects to the router. I want to try running POE cameras at some point. I want to be able to make a plex server, NAS, etc. Again, I want something flexible and I don't mind fiddling with it or paying a little more for decent hardware. I'm considering the Zyxel GS1900-8HP.

Both the Zyxels apear to be openWRT compatable. which is something I may want to try.

I generally don't keep up with this stuff. I've never went very deep into networking before. I wanted to check with some real people. Has anyone used any of these, or any other good wireless APs? Is there another strategy that would work better for my setup?

Thanks for reading!

I've had a ring camera for several years. Historically I've been mostly satisfied with it, but lately they are adding some features that are pretty annoying.

The worst is that they've been adding neighborhood alerts and other proximity alerts, with categories for traffic and weather and lost pets and things like that. Today I got a "community alert" which was actually an advertisement for a local animal shelter. I don't have anything against animal shelters, but my motion detector camera alter is not the correct venue for this message. It's clear that amazon is trying to muscle in on Nextdoor. I don't use Nextdoor. I find it to be like facebook, full of cranks and advertisements and nosey annoying people.
So now I had to wade through a few pages of menus to find where to turn of this new annoyance. Obviously, if I could I would opt out of all new features.

The other annoying thing is that they turned on some AI evaluation of what the camera sees. So I was getting messages like "there's someone with a garden hose on your lawn" or "a person is carrying a cardboard box". There were a few things wrong with this

• I didn't sign up to have this and it slows down the alerts so they are up to 30 seconds after the motion is detected
• The AI sometimes made errors, especially at certain times of day where it misidentified different things in the yard (for example, some place marked by shadow was interpreted as a sidewalk when there isn't a sidewalk there). This happens of course because the AI doesn't know anything about my property, it evaluates everything from scratch each time it looks at an image.
• The ring app started bugging me with upselling messages to pay extra for the AI messages

So yeah. I just wanted to vent about the enshittification of this thing. I'm also aware of the privacy issues of ring cameras and how they're going to use the "pet finder" functionality to keep track of everyone. But this rant isn't really about that more important stuff, just the frustration of how these tech companies won't just leave anything alone because they have different goals than us.

Despite vaccination, it seems I got the 'flu (not terrible so far).

I have my own non-prescription comforts and remedies for the sore throat, cough, upset stomach, fever, aches, and so on:

• Ginger, lemon, and honey tea
• Ricola cough drops, zinc lozenges
• PeptoBismol or TheraFlu (if I want to be knocked out)
• Scorching hot shower with eucalyptus or lavender oil
• Chicken broth with rice and thyme
• Electric heated mattress pad cranked up to high

There's little peer-reviewed evidence that any of these make a difference in the course of illness. There's marginal data on the effectiveness of ginger as an antinausea remedy, zinc as an immune booster in people who aren't deficient, and eucalyptus, lavender, and thyme oil components as antiseptics/antibiotics/topical anesthetics/cough suppressants. I'll be the first to concede that I practice all these remedies to give me the illusion of control of suffering, and comforting self-care.

I'm curious as to what home remedies others have tried, why, and how effective or comforting you think they've been.

Has a medical professional ever recommended a non-prescription remedy (not counting Tylenol/acetaminophen) or activity to you for a viral or bacterial infection, or told you to stop a home remedy? Did they give a reason why?

Is there a family, folklore, or alternative medicine tradition that you're following?

Does your home remedy make you feel like you're more comfortable and/or in greater control of your health?

Changing Mullvad server at router level

Reddit is becoming increasingly more and more hostile to VPN connections to the point where I often get the "whoa pardner" error message and have to try 4-5 different VPN servers on my desktop or phone before I finally get one to work with Reddit. Same thing sometimes with Google/YT, it keeps asking me to prove I am not a bot and a bit of experimentation with the servers gets me through.

This makes me wonder, is it as easy to switch my Mullvad server on OPNsense? I get the sense from the YT videos I have watched, I have to effectively setup an entry for every Mullvad router as separate instance on my OPNsense' VPN WireGuard settings and toggle which instance is being used at the router level?
I know I can technically have Mullvad on my router to hide all my traffic and then on all my devices that I use Reddit on, I can additionally have Mullvad on them too and play with the servers I am connected to on my device specifically until I find one that works but I am curious what the workflow is if I choose to do all my Mullvad related configs at the router level.

Making custom block?

I have a love-hate relationship with Reddit. On one hand, I can't deny that certain subreddits are useful as someone in tech, but I also can't deny that certain subs are just a time-sink and some subs are just toxic (looking at you AITA). I can often prevent myself from browsing the time-sink/toxic ones but sometimes I lose myself in them and I am in search of a way to block them via Mullvad at my router. Obviously a DNS-block won't work if I want to block reddit.com (the home page) and certain specific subreddits but leave any other tech related subreddits open for me to read so the next best thing I assume is some kind of firewall? But I don't know if such a firewall exists that can basically start doing regex on a URL to see if it should be accessible from within the network? Which makes me wonder if I can create my own firewall but I don't even know the first step, as in would this be something that integrates with OPNsense, or a stand-alone program I have to create myself? I know Python, Java and have some basic knowledge of C++ but don't even know if those are the language I need to know to create such a filter or if the filter I am looking for is even possible? Any and all pointers welcome.

I currently have a Netgear R6700 - Nighthawk AC1750 router that has reached end of service and am looking for a replacement.

When I set up the router, I had issues with some of my devices not connecting to either WiFi 6 or the 5 GHz band (I can’t remember which was the issue) so I had to set up a guest network for those devices to live on.

I would like, if possible, to have one network that everything in my house can connect to, but that’s a preference not a necessity. Are modern routers fully backwards compatible with older devices?

I’d also like something with a relatively long life ahead of it (though security is paramount and I’d rather have a secure router that I have to replace sooner over an insecure one that lives longer).

My house is just over 1000 square feet so coverage area doesn’t need to be huge. I do stream a lot of games to my laptop via Moonlight though, so being able to continue to do that without lag/hiccups is a necessity for me.

Let me know your recommendations and avoids, as well as any advice you have.

I noticed today that there are a large number of devices on my home network, all claiming to be ethernet connections. They kind of claimed all free IP addresses from x.x.x.63-253. They are not all on from what I have seen (and they are currently almost all off). Normally, my network should have only a handful of ethernet devices, which are my Fedora desktop, my Proxmox host, my OpenMediaVault VM on Proxmox machine running 24/7, and then the occassional VM I boot up as needed. I searched the occasional MAC address of one of these devices, and nothing came up. Does anyone know what the culprit of this would be or what I could use to diagnose it?

Screenshot of some of the weird devices listed (I blacked out my known devices)

Edit: It appears to be solved. I believe my OpenMediaVault VM was acting up/having issues and was gobbling up IP addresses. The issue has not occurred since restarting my Proxmox host.

A fancier way is here — but either is great.

—-

For those using iOS with a bookmark on their homescreen, you may have been plagued like me with Tildes opening in a private window instead of the session where you’re logged in.

I don’t know why I didn’t think about this sooner, but it’s so easy

Shortcuts > New > Create New Tab > Open URL (remove the variable and put in https://tildes.net) > context menu next to the title of the shortcut > Add to Homescreen > Photo (left image option) > select your tildes logo that i forgot to tell you to save

… done. Now Tildes will always open Safari in an authenticated session. ezpz.

Hello Tildes!

I've been trying out a lot of open-source apps these past few months but I've always hosted them on a VPS. It's been great and educational so far. However, I started considering to host my very own server on-prem so that my data is absolutely physically with me and nowhere else.

With that short intro, I'd like to say I'm in the market for a home server. I can install OS's, docker containers, etc. And that's how I managed to install Jellyfin, Immich, Paperless, Portainer, etc on my VPS right now.

What out-of-the-box miniPC can be good for someone dipping their toes in the home server scene? I feel like I might need the storage to be extendable somehow? And it must be able to stream music and video through Jellyfin.

The choices in YouTube videos are overwhelming that I keep jumping from saying "ooh I'll get that" to "oh wait maybe I'll get that other one".

I also am not very handy in terms of hardware so I would prefer something out-of-the-box (if possible). Maybe a max budget of 500? But around 400 euros would be preferred. (Edit: In EU also, if possible)

Thanks for reading! Hope to hear from you guys!

We're excited to be closing on our first house in several week! It's a newer build but doesn't have ethernet run so in the nearish term future I'd like to run cat5 cat6 to some key locations:

• main level for TV and a mesh wifi node
• second floor offices (PCs) and entertainment area for consoles/second TV

Any really good guides that others have followed? So far the guides I've found focus on switches and crimping cables rather than how to get a cable from Point A to Point B effectively without knocking more hole that necessary in the wall.

Edit: meant cat6, thanks for the note.

I am wanting to setup a personal podcast server but I am not really sure how to go about that.

I have my own server at home with docker and I am not sure if there are any well-known FOSS (preferable dockerized) podcast server applications that I can spin up and load some podcast episodes into so that I can create my own custom podcast feed that only I would subscribe to?

and I want to be able to support video podcasts.

It's hot here in Germany at the moment, and I've found a new hobby: experimenting with different ways to keep the flat cool. Unfortunately, right now I'm doing that mostly on gut feeling, and I'd like to add some data to the mix so I can pretend that this is Serious Research™.

Does anyone know of some good smart thermometers that I can use both inside and out, and that I can regularly take automatic readings off? My main criteria are roughly:

• Reasonably waterproof and battery-powered - I'd like to put at least one on my balcony which isn't covered, so I want to be confident that it survives out there.
• Relatively cheap - I want around 4-6 different thermometers spread around the inside and outside of the flat to see how the sun's position affects the temperature, and I don't want to spend more than around 100€ on this project in total.
• Scriptable - for the data collection, my plan is to be able to run a script on a spare Raspberry Pi to download all of the data and potentially send alerts when something changes or when it makes sense to start opening doors and windows to cool the flat down.
• Not too complicated - looking around, some thermometers seem to require smart hubs and online accounts and things. Ideally, I can avoid all that - I want something that I can connect to from my home network and download data from as I need.

Right now, I've found a few different smart temperature sensors that I can buy off-the-shelf, but these seem to be on the more complicated end of the spectrum, and require central hubs and uploading all the data to clouds and things like that. Ideally I can avoid that. Alternatively, I have some RPi Pico boards at home, so if I can buy some sensors that I can connect to those, I could get those set up more simply. But with the DIY route, I'm worried about weatherproofing, especially if the temperature sensor needs to remain fairly exposed for an accurate reading.

So: do you have any recommendations either for simple smart sensors that I can buy, or for sensors that I could easily stick to a Pico and leave outside for at least the rest of the summer months?

Has anyone out there hooked HomeAssistant up to a local LLM? I'm very tempted:

• Alexa integrations fail often. HomeAssistant integrations tend to be rock solid.
• Alexa is rule/pattern matching based. LLMs can understand natural language fairly well. The "magical incantations" required by Alexa are awkward.

Other than the software, the device side seems challenging. There are $50 fully-baked POP devices. I'm less sure on the DIY front.

Also, I desperately want my house to speak to me in the voice of the NCC-1701D computer. I've read enough now to know this should be achievable with a modicum of effort via OSS voice cloning tools or training a new model (same difference except "voice cloning" seems to often refer to doing this without training a whole new model?).

Thoughts? Experiences?

I've seen several pages that have led me to conclude this is tenable:

https://github.com/myshell-ai/OpenVoice

https://github.com/domesticatedviking/TextyMcSpeechy

https://github.com/mezbaul-h/june

https://www.home-assistant.io/voice_control/voice_remote_local_assistant/

https://heywillow.io/hardware/#esp32-s3-box-lite

I'm in the process of moving apartments, and I'm realizing I don't have an elegant solution to all of the tech gadgets/accessories/junk my hoarding tendencies refuse to let go of.

By electronic accessories I mean all the cables, flash drives, SD cards, dongles, headphones, power bricks, etc. that have I've gathered over the years. There are some larger items like musical instrument cables, wireless speakers, an computer mouse, even an old PS3 I don't really know what to do with. While most don't get used frequently, there have definitely been times where one of these items comes in clutch.

I'm not opposed to getting dedicated furniture like an under-desk cabinet, although I would want to make sure the space is used efficiently, and that it can be sturdy enough to be multipurpose (e.g. my work office cabinets have a cushion that can be used for sitting on top of). I'm in NYC so space is a premium and there's a low likelihood that I'll have extra space in existing drawers/closets, so I'd prefer a standalone solution.

Hoping there might be some clever solutions/suggestions Tilerinos find handy, even if it's accepting that a Marie Kondo-style purge of unused electronics is necessary.

I will soon have a home and figured now's the time to do a proper home server, especially since it's going to come with cat 6 run from the main panel to just about every room. I code for a living, but at the same time network is a massive gap in my knowledge, as are servers, and I was hoping to use this as a learning moment as well as just a way to optimize things. I've been doing research for a few weeks now on and off and feel like I've got more questions than I started with, so I'll just vomit them out and if anyone has some guidance I'd really appreciate it.

Some information:

1. I'm willing/able to spend to get quality/simplicity. Time is the much bigger crunch for me right now, and I'd much rather buy something that works even if it costs more than cobbling together some deals.

2. Related to 1, I'd like this to not become my fulltime second job/hobby. I will at some point try to expand to a full home lab, and do want to use this to learn about things I feel I should understand better for general knowledge and my career, but i'd love for core functionality to mostly "just work" after configuring so when I don't have time to do that I'm not stuck telling everyone "oh yeah it'll be broken until I find time to fix it".

Things I know I want-

1. Some sort of NAS. From my research Synology comes up a lot as the "it's expensive but it'll just work" option, and I probably want something like a 4 bay of NAS specific several TB HDD's in something like raid 5/6/10. Pricey as hell but I'm most willing to spend on this as the cost might very well be split by the family members who want me to guinea pig all this.

2. I will have a camera system and would prefer to not have it sending data outside my network. This is the area i've looked at the least, as it's a little farther down the road, but I know others who have things like Arlo and lets just say i'm not super impressed. Obviously this brings up question like remote access to said camera's and where I'm storing the data (nas? Somewhere else?)

3. I'd like to mess with a media server. Plex/Jellyfin constantly come up in my research, so I'll be looking into those, but I've also got a bunch of audiobooks that I'd love to be able to easily share, and I think there's software for that stuff as well.

4. Pihole strikes me as the other "well if you're going to do this, you might as well" option that i'm aware of. Realllly need to better understand networking in general, but I hear these days it can kinda be installed and quickly configured and then left to do its job.

5. Related to all of this, Casa OS keeps coming up as a very good tool for a beginner like me, since it streamlines the handling of docker containers and also file sharing. However it's not really an OS, since it must actually run on Debian (i think?) for now (zima OS still in testing?).

Stuff I'd like to mess with but doesn't have to happen right away.

1. Eventually the aforementioned NAS would be backed up offsite to another NAS at another family members house, once I know what the hell I'm doing.

2. Proxmox constantly comes up as THE tool to use, but it leaves a lot of questions for me. Obviously if I start trying to do lab environments and screw with VM's it's going to be great, but my understanding is that I probably don't, as a beginner, want to say load up a device with proxmox and then have it host debian which installs CasaOS as it'll get a little more tricky to have everything talk right? Unsure on this part.

3. Anything else I'm forgetting. One issue I keep having with this is a LOT of the information out there is either too complex for me to really grok or just says "well yeah you could do ANYTHING with this" and it just sorta assumes I know what the options are. If there's anything else worth checking out I'd love to know.

Hardware I've come across-

1. Synology - Already mentioned but seems like they're a common go to for a "more money than skill/time" situation like mine.

2. Zimaboard - My understanding is it's underpowered for its price, but the main draws are that it's VERY low power, small, and quiet. What it could actually do from my list above is where i'm unsure. I see people are supposedly using it for Plex servers and what not, and I'm pretty sure it's not going to make any kick ass lab environments, but being quiet, small, and maybe a bit closer to plug and play seems tempting (I know they make the blade and a few other products but it all seems greek to me).

3. Various mini computers - I've got a minisforum machine from several years ago that I currently use as a living room computer for light gaming and mostly playing movies and the like. Not sure if i could just wipe it and convert it to be the starting point (more on that later). I know used 1 liter mini pc's from companies like HP are also popular.

4. The MS-01 - Similar pile as the last one but my understanding is this is the kind of thing that's probably really cool if you actually know what the hell you're doing. I'm 99% positive it is vast overkill for my purposes, but I'd like to eventually get to the point where I could understand why I might want something like this. My understanding is if I knew what I was doing I could probably drop proxmox on this and do everything I could ever want and more, but I feel quite far from that.

Some general questions I have -

1. The thing that kicked this all off is my new place likely having fiber, and cat 6 drops throughout the building. Architecture is something I'm still a little shaky on. I assume i'm going to need my own modem/router (just because the cox routers are meh and not really configurable from last I checked), and then that routes to the server first???...or something(seems like a must if you want the pihole to do anything)? I've seen lots of niffty network diagrams at this point but they're all from people WAAAAAAAAY beyond my skill level doing much more ambitious stuff, so it gets hard to understand. If anyone has a simple home network diagram/guide to look at I'd really appreciate it.

2. I'm just in general going to need to learn more about networking, especially in a home environment. Should I eventually get those camera's set up, I want to understand how to let them talk to internal storage and what not ,but not get out to the web...or..something (again remote access seems nice, but also like a massive security concern). I know speed is also a big factor i'm going to need to better understand. Having a fiber connection in only to be bottle necked by a crappy router or a 1gigabit port is just a waste of money, so that's something else I'd like to better understand.

3. I'm a little unclear on how to deliver the media in a media server to the various screens throughout the building. I've got cat 6 to all of them, but I suspect i'm still going to need, at the very least, a cheap computer to hook up to it and then display the image to the monitor/TV? This is why I assume I can't just wipe my current mini PC and reuse it as a server, because I still need it to receive the data from the home server (or at least a web browser?). A part of me feels like if I got a powerful enough server it should be able to server the media direction to the screen, but then you'd need some sort of HDMI/DP drops as well from the server to all your screens?...or something?

Sorry for all the rambling but I've got an odd mix of knowledge and ignorance so it's been a little difficult to research when half the video is stuff I already get, and the other half blows past me or just assumes I know about the parts i'm trying desperately to learn about.

A few questions for those who have tried homebrewing (and general thread on homebrewing in general)

• Have you ever tried homebrewing?
• What were lessons learned?
• Did you regret the up-front investment?
• Do you bottle or keg?
• What are your favorite recipes?
• What is your setup like?

Feel free to answer only one question, all of them, or none of them and share an anecdote!

Hey folks - I've been wanting to go whole hog on automating my home, I read through this smart home automation - tips and tricks thread started by @Merry and had a lot of useful information.

Some of the things I took away from it:

• Home assistant is pretty great (if you don't mind tinkering)
• Getting something that will boot back up after a power failure is great
• Use smart plugs / switches vs bulbs
• Maintain it's usefulness if there is an internet outage

Like I mentioned I'd really like for this to be privacy focused and mostly self contained. Sure I'd love to be able to control stuff from my phone while I'm home and also recognize that I'm home or away.

I just am a bit smooth brained when it comes to even seeing "would something like this work with the wiring / circuity that I have in my home already?"

If there are any good guides to follow or really specific advice / steps I could follow to begin this process I'd really appreciate it.

Hi

I figured before I start venturing into other forums dedicated to this sort of thing, I'd ask here on Tildes since I'm at least comfortable with the community and how helpful they can be here.

I'm tired of all of the subscription services I have, movies and TV shows disappearing from them, buying a film on Prime and only being able to watch it offline through a specific app. Even then, half the time we're watching comfort TV shows that we have on DVD already (X-Files and Friends for instance).

So I figured that building a home media server would give me the chance to cut the cord with a couple of these services and allow us to start using and controlling our own data again.

I have a budget of around £300 (I could perhaps push to £400 if needed) and I'm honestly not sure at all where to start. I have knowledge on how to build brand new, medium to high end gaming PCs as I've done it since I was in my late teens and built my first PC with the wages from my very first job but building a budget minded PC for use as a home media server goes completely over my head.

I've noticed that a lot of the pre-built NAS or media server boxes are very expensive so my first thought was to buy a refurbed workstation or small form factor PC that has enough "oomph" to do the trick but I don't know what ones to even start looking at and then I start to feel a little bit out of my comfort zone.

Things like getting the right CPU in these refurbed machines that offers the features I'm looking for like hardware transcoding etc., integrated GPU's, ensuring there's enough SATA ports for multiple hard drives and an SSD for a boot drive, and then to top it all off ensuring that while achieving these features the thing shouldn't draw too much power when idling as it'll be on for long stretches of time, if not left on 24/7.

I've also got no knowledge of Linux, I've never even looked at it but if it's genuinely easy enough (for someone with next to no Linux experience) then I'd be happy to give it a shot if it offers better performance compared to using Windows 10 or something.

All the server will be used for is watching TV shows, perhaps the odd film, listening to a bit of music perhaps and the odd podcast now and again. Simultaneous streaming will be fairly minimal, perhaps 2 streams as me or my partner watch one thing and our daughter watches another on her tablet. In regards to streaming outside the house that will also be almost non-existent, perhaps, again our daughter watching a kids TV show like Pokemon or Fireman Sam on her tablet when we're out but me and my partner don't tend to watch anything when we're outside the house, certainly not TV shows or movies anyway.

Redundancy isn't something I'm too horrendously worried about, I wouldn't be storing anything like photos that we wouldn't want to lose on it and while it'd be annoying, losing a drive with TV shows or films on it wouldn't be the end of the world.

Any help would be massively appreciated, thanks.

I'm curious if anyone here is currently using the 6GHz channel with WiFi 6E devices and whether you're seeing a benefit in your experience. Do you feel it was worth purchasing a router/access point with WiFi 6E over WiFi 6? I've been following the rollout of WiFi 6E for a while but I haven't heard much real world feedback.

Context: I have 3 access points at home all at the WiFi 5 standard and I'm considering updating each to WiFi 6/6E. I have few (if any) 6E devices at the minute but would plan to keep the access points for at least 5 years or more.

P.S. this is my first post so apologies if it's in the wrong location or a duplicate. I searched and found no other WiFi 6E discussions ✌️

Next week, I will be closing on my first ever home (hello Michigan tilderinos!). One of the projects I want to tackle and work on after I move in is setting up a smart home ecosystem that is sustainable long-term. I saw the open-source Home Assistant but I think I need to do more research on it and find compatible products. For now, my wishlist of projects are:

• Controllable lighting from my phone or computer
• Carbon Monoxide/Natural Gas detection
• Water leak and usage monitoring
• Thermostat

Are there any other use cases that you use home automation for? If you use Home Assistant (or used it in the past), what are some things I should consider? Any products that you bought in the past and regret now?

I had a stroke last year, which left me partially paralyzed. I'm doing much better and only my left hand and arm are still somewhat affected. Even though my stroke wasn't related to my lifestyle, I would like to get in better shape, and my PT has recommended getting an indoor bike. I would like one with pulse readers in the handle bars and preferably USB port to connect a tablet or phone to keep track of my progress. I live in Europe, so something available here would also be preferable. Does ~health have any experience or suggestions?

Edit: I've just purchased an Unraid license. I'll give it a go and it may not turn out well, but for the time being, the question is settled. I appreciate everyone for providing insightful and informative answers!

Hey everyone,

I've recently bought myself a NUC (NUC11TNHi3) that I intend to run as a home server, using many of my external USB drives as the storage.

My use case is very narrow. I'll use it as a Plex server and seed/leech torrents with it.

I've never built a home server like this before (I did dabble with it on a RPi, but that was just for PiHole), so I've never had to research what operating systems are available to me. After some research, I narrowed it down to two options.

1. Windows
   This option is the most straightforward given that it's the system I'm familiar with the most. My use case is also very narrow, so I could set everything up in a couple of hours. All I'd have to do is install Plex server, a torrent client, exposing them to the outside world with port forwarding or Tailscale (never used it before but seems easy enough), and share my external USB drives locally so that I can access them using my regular desktop computer at home. The downside of this is that Windows can be finicky. I'd also prefer to have my drives pooled under a single drive. A cursory research suggests that Windows can do this as well, but not in a way that inspires confidence.

2. Unraid
   I hadn't heard about this since last week, but it seems like a nice option. It costs money, it's proprietary, and I'd likely have to reformat all my NTFS drives to be able to use it but I was wondering if this would be the best long term solution. The learning curve will be there. Arrays, cache drives, share drives etc. are terms I'm not familiar with (though I can guess what purpose they serve) so it will be more time consuming to set things up properly. But given how narrow my use case is, as elegant a solution as it seems, is it necessary? I'm only considering this because seems like this is the best purpose built OS in the market right now.

Some clarifications:

• I'm sure someone will suggest a Linux distro. I have used Fedora as my main OS for a couple of years and I was quite happy with it, however I could never wrap my head around the Linux permissions structure, which Plex is awful with, as it creates its own user and look for drives under that user. I must have spent hours and hours to make Plex read my external drives properly before, but I've never managed to make it do so without some sort of hacky way and I don't want to do that with my home server. I don't want to have any doubts that things can go wrong. I want something that just works. (If only Synology had a capable device that could handle multiple simultaneous 4K transcodings. I'd have just throw my money at them instead of buying a NUC.)

• My use case will remain narrow. Maybe way down the road I can automate stuff with Sonarr or Radarr or stuff like that, but I don't think I'll ever consume enough recently released stuff to justify it. One thing is for certain, I'm never going to host my password server, feed reader, or something like that on this device.

That's about it. What should I do?

Given that I'm a novice is this area, I'd be all ears to listen any other related or unrelated advice for someone who's just starting to build their first home server.

Thank you in advance.

My current round of insurance with TD / Primmum is due up. I have a 2021 Jeep Gladiator (financed) and a 2019 KIA Rio (no loan), house (no mortgage), and 2016 17' travel trailer (no loan) with them. Been with them for many many years. Supposedly have a group plan through my employer Ontario Power Generation. I'm not so sure anymore. While it's just me (47m) right now, my 17 year old son will likely get added Friday when he gets his G2 🤞.

I wonder if anyone could recommend a company that would do good for all, or separate for each. I also have some artwork and camera equipment I would probably tack on.
The letter I got from TD also said if I don't put a tracker on my Jeep (for theft) my premium will go up. They will pay for it, but if they supply it I won't even consider it. I don't want them following me! Giggle does that enough.

Searching "best xxxxx" will always give you sites that make money from the reviewed businesses. I won't trust any of them.

My girlfriend and I have been in the market for new computer chairs at home, as we have been getting increasingly uncomfortable in our existing chairs. We are both shorter people (both under 5’5”) and the problem we’ve been coming across is in most chairs (even the ones I’ve found for “short” people) tend to have seat depths of 16+ inches. What ends up happening is the edge of the seat ends up pushing into our calves leading to bad posture because we can’t sit up fully to the back of the chair unless our lower back gets leaned forward a bit due to the size of the seat depth. This leads to bad posture and back pain.

So I’m curious fellow short people of Tildes, does anyone have any recommendations for a more comfortable and ergonomic chair for short people?

Long story short my roommate has a surround system she got at Goodwill and I set it up for her but the internal amps are not functioning properly. It's only using the front two satellite speakers and sub which is independently powered. So it's 2.1 for now.

The front two speakers barely put out much sound even cranked to max volume. The sub is fine as again it's independently powered.

I've ruled out all settings, as there is a 2.1 output mode, and the radio is just as low so it's not an input issue. I have it hooked to her PC's output. I also have proper gauge speaker wire so that's not the problem either. I did hook up the center speaker to one of the front outputs too. Same deal.

So can an inline amp help at this point? Is there anything else I can try or rule out?

Also if this is not appropriate to post here in Tech I apologize in advance.

I've been idly browsing for a home weather station for a while, hoping to contribute to the local sensor network for a region that's got lots of microclimate variation. I saw this one from Seeed Studio today, and was hoping for some reviews and advice. Seeed Studio devices are known for open source software, and I wouldn't mind playing with writing a tie-in for sprinkler system automation so we're not irrigating when it's about to rain. It wouldn't be situated so far from the house that we'd need to use the LoRaWAN feature, though.

Concurrently, we just had an inch of rain dropped on our house in the space of 15 minutes, with winds that were taking down tree branches. The weather report says "light rain", weather stations a mile away continue to indicate that everything is bone dry with quiet air. This rainstorm breaks a nearly month-long drought. I'm finding it nerve-wracking that climate change makes it impossible to use past local weather as a predictor of what to expect for gardening, home maintenance, and outdoor activities, and local weather reports are so inaccurate. So that's (hopefully) where the weather station might come into play.

That being said, any chat about your local conditions and reporting from your station is welcome.