There are certainly a few people here, who will be buying Steam Frame VR headset.

I enlisted myself a few days ago for the first wave lottery reservations. After a bit of thought, I also enlisted my daughter, to double my chances from almost 0% to double of that but still near zero in my eyes.

A few minutes ago I got e-mail. I'm on waiting list after first wave goes out... Well, maybe this year?

My daughter checked her e-mail as well. And what do you know? Doubling of the chances paid off and the chance was actually higher than near 0% - her account got picked by Valve! It seems we are getting the headset in upcoming days/weeks.

Now the question is: Should we get the head and handstraps also? I think we should. But I don't knowbif I should get also new foam/seal. I'm not spending 170€ on color camera, at least not for now.

Sorry for this kind of post, we are just so happy and I wanted to share the happiness. I hope some of you got on the list for first wave as well.

I bought my thinkpad T480 back in like 2017-2018 (I think) and there have been ups and downs to my time with it. but one thing that has always bugged me is the pointing stick.

Apparently Debian and the Thinkpad T480 pointing stick really don't work well together.

if I have just booted up my computer, its OK enough and I dont feel any wrist strain.

But often, when I wake my computer up from sleep, it is SOOOO SLOW, I develop wrist pain trying to get the bloody mouse to move and just give up and use an external mouse.

I have done some investigation and set these as a result

echo 255 | sudo tee -a /sys/devices/platform/i8042/serio1/subsystem/devices/serio2/speed
echo 255 | sudo tee -a /sys/devices/platform/i8042/serio1/subsystem/devices/serio2/sensitivity

xinput set-prop 'TPPS/2 IBM TrackPoint' 'libinput Accel Speed' 1

but it doesn't help 100%

I tried to see if gemini could help but it went down some path that involved modifying some matrix and didnt quite seem to understand the issue.

I will openly admit to being a novice to these hardware-level issues, although I am always happy to learn but feel completely out of my depth and need a pointer or 2.

my system info

 $ echo $XDG_CURRENT_DESKTOP
X-Cinnamon
 $ echo $DESKTOP_SESSION
cinnamon
 $ cat /etc/*release
PRETTY_NAME="Debian GNU/Linux 13 (trixie)"
NAME="Debian GNU/Linux"
VERSION_ID="13"
VERSION="13 (trixie)"
VERSION_CODENAME=trixie
DEBIAN_VERSION_FULL=13.7
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Hi all. I'm working on an idea for my next desktop/workstation build since I stumbled into some resources that make something more awesome than what I currently have a reasonable option.

What I want to use (because I already have these and thus can save money - got a bunch of rackmount computers at auction and got pretty lucky): infinite sticks of 16GB DDR4 3200 (ok, so I have 20 sticks left after selling a bunch, not exactly infinite but good enough for wanting a single maxed-out build) and 4 RTX A4000 16GB cards. Probably I only intend to use 2 of those and sell the other 2. I also am spoiled for options with various 4U rackmount server cases and a couple of them have 1,000W power supplies (the 2 computers that each had 2x A4000 cards had 1kW power supplies).

My current desktop is an i9-11900k / 64GB DDR4 3200 / RTX A2000 6GB. At first I was interested in just popping a couple of the A4000 cards in but then research banged my head into the issue of PCIe lanes being limited by the CPU.

Options I'm currently considering are Threadripper Xen 3 generation (since that uses DDR4 3200, lets me use 8 sticks depending on motherboard, and gives me 128 PCIe 4.0 lanes), EPYC of some variety since some of those also fit into the 'can use tons of RAM and have tons of memory channels + more than enough PCIe lanes' or..... dual Xeon? AMD seems like the better choice though - but correct me if I'm missing something there.

If I've missed any other options that would give me enough PCIe lanes for at least 2 A4000 cards both connected at full PCIe 4.0x16 and the ability to utilize as much of the RAM as I have (and have the advantage of more memory channels than standard desktop processors) please let me know.

Also looking to not break the bank too much, something that fits into the sub-$2K range, or close to that, would be preferable (and cheaper being more preferable). Anything that goes past $3.5K is almost certainly not up for consideration.

Last point of consideration is that I'm not looking for any part of the new build to be less capable than what I already have, and am not looking to spend significant money for a non-significant capability increase.

Use-cases relevant to my desire for the horsepower: video rendering with Blender (I certainly wouldn't mind rendering going a lot faster when outputting H.265 or rendering hour+ videos), and dipping my toes into local AI (have been interested in this but until I lucked into the A4000 cards it wasn't really possible. With a couple A4000 cards I should be able to run some of the lighter-weight models, at least I believe so (I have, as of yet, no experience running local AI). Would be running Linux (I currently use Linux Mint). Gaming is an afterthought and I don't play anything AAA / ultra-high graphics. Mostly for gaming I just enjoy playing Magic: The Gathering Arena as I drink my morning coffee, so no major hardware requirements there.

Thoughts?

Edit: the DDR4 3200 is non-ECC RAM.

Dear Tildesterites: my trusty PC has led a dutiful life of eleven years and, along with my keyboard, has finally met its earthly doom (total organ failure). I wish it luck across the ultraviolet lithographic bridge, at the other side of which we'll someday reunite to play Skyrim together again.

In the meantime, I would like another PC on which to play various modern AAA games except for The Elder Scrolls VI. I'd intended to replace my machine ~4 years ago when it was in fairer health, but other efforts took priority. Since then, the product market has inflated in price and all the SKUs have changed, so I'm back to being mostly clueless about the state of the industry.

I put together a parts list from some basic research and would like a gut check. I'm coming from an i5-4460, GTX 970, and 16 GB RAM at 1080p 144hz, which may as well be neolithic. I only really need this PC to play video games smoothly and to do standard workstation tasks (nothing remarkable).

PCPartPicker Part List

Rationale and notes:

• 60hz to 144hz was the greatest upgrade I ever made and now it seems like 180hz or 240hz is the new 144hz. I've also wanted to move to 1440p for years. I reviewed the Gamers Nexus GPU benchmarks and it seems like 120fps+ is broadly possible at this resolution.
• Nvidia's cards seem unreasonably priced. A friend of mine offered me his RTX 3070 for free, which I would be happy to accept as a stand-in to keep the initial cost down, and in a year I might come back to get a newer card like the 9070 XT or whatever replaces it?
• I'd like an M.2 to keep cable management to a minimum.
• I will not overclock or undervolt the CPU. I'd just like it to run.
• I'd love for the thing to be quiet.

My questions are:

1. Does the build feel balanced? Are there any egregious oversights?
2. How much RAM is prudent, at what speed/latency? Do we expect prices to drop anytime soon?
3. M.2 PCIe 3.0, 4.0, or 5.0 x4? Does this matter for games? Is a dedicated OS drive still best practice?
4. IPS or OLED? WOLED or QD-OLED? Is Freesync Premium sufficient? (@AugustusFerdinand we spoke about this some time ago; has your opinion changed?)

I thank you in advance for your insights. I'm not going to buy this immediately (this summer at the earliest), but I'd like to know how close to reasonable I'm being.

I am a hobby programmer and spend most of my evenings coding. My monitor has a built-in backlight, but I've always found that just a bit too weak for my liking. Turning on the lamp in the room is too bright and produces glare, using a table lamp is directional and imbalanced. Using an LED strip on the underside of the table does not illuminate my desk at all, so it's not particularly useful.

Recently, I stumbled across monitor lights again, and for some reason impulse-bought one. A super simple ~45cm wide, dimmable straight one with warm white colour. Let me tell you this thing is incredible. It provides exactly enough light without producing glare. The light comes from the centre and my hands cast an unobtrusive shadow. I've only used it for a couple of hours at this point, but the difference is remarkable. My eyes feel way less strained.

For context I'm using a 32:9 UW monitor with 1800R curvature, so this doesn't cover more than ~40% of the screen, yet there is absolutely no visible glare at all! The monitor looks completely unaffected.

Do you use one as well? What's your experience with it?

I promised in another thread that I would share more about my first impressions about the Steam Frame soon, so here I am.

There's still not much I can say because, in my case, using glasses inside isn't an option. But whatever questions you have and couldn't find answers anywhere else, let me know and I can check for you (be it settings, small things no one thinks about, etc)

I'll be recycling a bit what I already said in the other comment (with a few corrections), but here goes my first impressions and some thoughts:

• I said in the other comment that the spacer for the glasses was disappointing, but that's actually not true. To be fair, they do their job. The glasses should be as close as possible to your face anyway, and you can't have too much space between your face and the lenses in the VR, so the spacer does give you a bit more space that should be enough for most/all people. I was able to confirm that both my new glasses and my old ones do not touch the lenses. That said, I still wouldn't play a VR game that needs me to move a lot, the risk of them coming loose and scratching the lenses isn't null.

• My problem with the glasses is different. My new glasses are too wide. They barely fit inside and put a lot of pressure on my face, I think it's the sides of the VR that push the glasses against my face.

• So yeah, if you use glasses, I highly recommend getting prescription lenses (this also applies to any VR headset, but still).

• I was able to run on the Frame: Ace Combat 7, Hades 2, Dragon Commander and Dispatch. All of them were playable (Ace Combat 7 was a pleasant surprise!). Dragon Commander technically ran well, but it didn't recognize the controllers.

• There's a tab for Steam Frame verified games, but you can download anything from your library. Cyberpunk 2077? Knock yourself out. Will it run well? Nope, but it does run.

• • Sidenote: the new proton for ARM processors make me hopeful that laptops with ARM processors could become a viable alternative to traditional ones (I mean besides macbooks)

• Speaking of controllers, they're MUCH better than Meta Quest 3's. The layout of a conventional controller means that they can be used as such. Furthermore, at any moment you can activate the "pointer", which turns the respective controller into a mouse (while the other remains a controller). Meaning if you have a game where sometimes you need a mouse, Steam Frame has you covered.

• I got the ergonomic kit because of the controller straps, but as for the headset itself, I'll be the contrarian against the rest of the internet and say that those extra pieces actually aren't necessary. Or at least, not as ABSOLUTELY necessary as people make it look like. The space between the headset and my nose is not sealed, true, but unless I get conscious about that "hole", I won't notice it. I also felt that the top strap isn't necessary, the headset feels firmly held against my head.

• • That said, let me admit a few things: I didn't play a VR game yet, so maybe "firmly held" could be a different story in that scenario. And for a 1k euro device, there's an argument to be made that these ergonomic accessories should've been included by default, which I wholeheartedly agree. The nose thing, might have to do with my head shape, might not, I don't know; I just felt that whenever I was looking at the "screen" inside, I didn't notice the "hole" down below.

• The battery is... Underwhelming. Be prepared to get a good powerbank if you plan to have mid-long sessions.

• I tried using the wireless adapter on my gaming desktop (running Fedora 44), and it looks like it worked! Pleasant surprise, as I was under the impression it didn't work on Linux yet.

• Streamed Red Dead Redemption 2 for a bit. Rockstar launcher popped up so I could validate my account.... Except this window didn't appear on the SF, only on my PC's monitor. On the SF, I wasn't able to change windows, I only got a black screen. Once I entered the game, I could hear the sounds of the intro playing but the screen was still black. After fiddling a bit inside the VR, I managed to make it show the game itself, then I was able to play it normally.

• • This is to say, "window management" inside a game is finicky. So games with their own launchers? Expect them be as annoying here as they are in general...
• • • Caveat: only tried one game in this condition (opening launchers/windows alongside the game), so it's possible it was just bad luck and not representative.

• (copy pasted from the other comment) the update process (that you're forced to do) was really slow - the download would top at 10mb/s, but on average it was on the kb/s.

• (copy pasted from the other comment) The environment is really polished - more than the Steam Deck it looks like. I like how from inside Steam "app" itself, I can open the desktop mode as if it was an application. I don't have bluetooth keyboards but I think it should be possible to use this as a normal PC, which is really cool.

• (copy pasted from the other comment) Just like the Steam Deck, you have control over almost everything. Hardware usage, screen framerates, etc.

Some basic comparisons against the Meta Quest 3:

• Unlike MQ 3, the SF works just fine in any kind of environment, even if it's pitch black. Side note: it's a bit mesmerizing checking out the LIDAR's and Face ID's lights from my iphone. This thing is unironically a really good device to spot hidden cameras.

• YMMV, but for me the lack of colors in the passthrough isn't a big deal. I spend most of the time "inside" the virtual world and barely used it on MQ3, only for when someone was calling for me - or my cats. But even then, 95% of the time I would just take the headset off if whatever was demanding my attention wasn't quick. Talking to people with it on your head is weird af (especially for the other person). What I'm trying to say is that there were never situations where I needed to see the world around me and it needed to be in colours; I would just take the headset off in those cases.

• • Caveat: 1k euros device, I get it. It's dumb that you still need to fork over another 100 euros just to get colours. And I guess it's not a good thing for AR games.

• The SF is a bit smaller, lighter, and it's more comfortable imo. The idea to move the battery to the back of the head was smart, I think long sessions with SF should be more comfortable.

• MQ 3 has hand gesture recognition while SF doesn't. But personally, I don't really care. On MQ 3 this feature is finicky, frustrating to use, it's annoying when I'm watching movies/videos, and more importantly, it makes me want to throw the headset against the wall (exaggeration for comedic effect). So for me it's not a huge loss.

• If you feel that after these impressions I'm biased against the MQ3, well.... You're not wrong, but I just realized that it feels like I'm defending SF too much and criticizing MQ3 too easily while writing this. I'm biased against it mainly for privacy reasons, but on a hardware level, MQ3 is a great headset in its own right. It's equivalent to SF and costs a lot less. If you don't care about privacy, you probably should go for it instead of the SF.

Feel free to ask me anything about the Steam Frame and if I can check it out for you, I will.

I know we have a few VR veterans around the site, and given that the Steam Frame has finally materialized, we likely have some people who are soon to be new to VR.

This is a topic for people to ask any questions they have about VR, as well as for people who are familiar to share recommendations, tips, tricks, and any other thoughts they have.

I wanted to put out a more complete guide than what's currently available for people who may want to do this in the future; welcome to my blog.

Love the mouse, but the battery wasn't lasting more than 3 days.

Here's a pic of the original battery (602030 300mAh 3.7V):
https://drive.proton.me/urls/TT7GVDNG5C#BKMx0MHmSwvg

I bought a replacement battery from AliExpress:
902030 550mAh 3.7V JST 1.5mm 3pin

Here's a pic of the final result:
https://drive.proton.me/urls/BEMDHJH668#I2ZixElmwv7E

There's plenty of height clearance, but no wiggle room with length and width.

The most important tidbit is the polarity of the wires; I had to swap red(+) and black(-).

On the original battery (all black wires) you can see the P- and P+ indicators on the original battery circuit board. In summary, the "bottom" of the connector (on the mouse) expects a positive (red wire), middle is the sensor (yellow wire), top is negative (black wire).

The battery arrived with the red and black wires the other way around. I used the smallest flathead screwdriver to, very slightly, prop the plastic "prong" (where you see the three plastic 'prongs', not the flat side) of the red/black wire and gently pull them out. Take note of the wire's positioning (the metal bit). The top has a very tiny metal bump that "clips" against the plastic prong you lifted. Putting the wire back into the housing should be "like a glove"; no forcing.

Everything is working without issues so far. The Pulsar software is reporting the battery level, but can't be sure if it's accurate. I also haven't had a chance to measure how long the new and improved battery lasts.

Another tidbit, I tore the "ribbon" when taking the mouse apart.
https://drive.proton.me/urls/DE33WP907M#Xc4A2qfEoMat

The cable connects the side buttons. I found a replacement (no thanks to Pulsar support who told me to either pound sand because they wouldn't even hint on tech specs of the cable or pay to ship to Korea and wait months for it to get sorted which it wouldn't because me disassembling the mouse isn't covered under warranty [fair enough]).

The exact title of the cable I ordered is: "uxcell FFC Flexible Flat Cable 10 Pins 0.5 mm Pitch B Type 80mm". The most important specifications are:

• 10 Pins
• .5 mm pitch
• B Type
• 80mm (perfect length, but can go a little shorter if you must)

These things are sick eh?

I’ve had the new one for a few months now and well it’s absolutely incredible. I pre ordered like two years ago and for the longest time my girlfriend was like “you’re getting scammed it’s never coming!”

I love the battery life and Rebble is sweet, the bobby app with a subscription is my new personal assistant without all the hassle of the big tech conglomerates bs

Asked in ~comp thread, figured it should be its own post.

Thinking about whether I want to do some upgrades to my 10 year old PC or buy new. I could bump RAM to 16 without breaking the bank since its DDR4, and maybe splurge on a new processor, but I'm not sure if I'd just want to go with a new machine at that point, thoughts?

AMD Ryzen 3 1300
8.00GB Dual-Channel DDR4
MSI B350M PRO-VD PLUS
4GB ATI Radeon RX 480

Edit: To follow up some questions about what I'm using this computer for, not a whole lot at the moment. I was thinking of making it into a media server or a Steam OS console now that it's available to download, but it's more of a whim and a project itch to keep my mind off of personal and global events.

Edit 2: I did pick up a AMD Ryzen 5 5500 for $75 and 16GB (2 x 8GB) DDR4 3200 from Corsair for $115 from Newegg. I'll roll the die and see if it works out. Thanks for the help!

I recently got promoted and my new position is about 70% travel.

Planes are loud.
Airports are loud.
Malls are loud.

I'm looking for really good noise cancelling, over ear headphones that have a hidden mic.

Ideally they would be good at playing audio on a plane and for taking zoom calls on my laptop. Bonus if switching between my android phone and MacBook is simple/without known issues.

Price is not a concern.

Hello my fellow tildestians (tilderinos?) - I'm looking to upgrade a very old home router (a hand-me-down linksys of some variety). I game quite a lot (my computer is connected via ethernet to the current router) (often while others folks are streaming shows elsewhere in the house) so preferably something that is able to handle that? Maybe something that would allow a later upgrade with mesh? I don't know what a mesh is but I see them recommended in a lot of these "best router of 2026" lists so maybe that's something I need to look into.

I've seen a lot of recommendations for asus and tp-link and ubiquiti? I am not super technically inclined so ease of set up is a nice bonus but I'm willing to put in the effort if needed >_< Budget is around ~300 usd. Blessings be if you have the time and knowledge to spare for me :) thank you!

(also, if this is in the wrong topic please relocate me with my sincerest apologies)

I have a Samsung Galaxy Tab S6 Lite (2022) which has reached end of life and no longer receives updates. I was wondering if it was possible to revive it using one of these alternate Android versions, but I was very frustrated to see that LineageOS (the one I've seen mentioned the most besides Graphene) supports both the 2020 and the 2024 model of this tablet, but not mine.

I wanted to hear from fellow Tildes users if installing one of these OSes would be worth it to get continued security updates for an old tablet like this, which OSes are out there (I've only heard the names of a few of them), which ones to avoid (maybe it's abandoned or there's some drama around a particular OS for whatever reason), and if anyone knows of one that specifically supports my model.

I'm also curious if S-Pen stylus support would work on any of these other OSes.

Hello,

I have decided to get myself a laser printer.

My intentions are to have a working printer occasionally. So sometimes I will print a lot, but then it can be left unused for a couple of years and I want it to be usable in the instant I want it without having to go and get new whatever.

My question is are there any considerations besides the printer being listed at https://openprinting.github.io/printers that I should make?

I will not hunt down the most open (as in copyleft/libre soft- & hardware) printer but would not mind it being open.

More importantly is the expectation that I could find new toners (I think that's the word for "ink" in laser printers) in 5 years.

I don't really want color, but if it isn't that big of a difference I might as well.

(I could change my mind to get a different kind of printer, but you'd have to be really convincing.)

Hello Tilderonians,

I have inherited a non-functional ~10 year old gaming PC that was previously used as a VR rig for kids. The people who owned said PC had no info on how or why or how long it had not been working for.

I got it home, plugged it in, and tried to power it on. Nothing happened.

I opened it up. With the PSU switched on, there is a red led lit up on the motherboard, an ASUS Pro Gaming Z170i. According to the user manual, this just means the mobo has power and is in standby. There is also a white led lit up on the gpu (a GTX1080) which seems to also indicate simply that it has power.

I first assumed that the power button built into the case was the issue. I found where it plugged into the mobo and, on advice from the internet, used a screwdriver to jump the pins for the power switch. Nothing happened.

I then also read online that the PSU fan should spin up when turning it on with nothing plugged in. So I unplugged everything and tried it and nothing happened. I read the LEDs on the hardware could still function even if the PSU was dead, so I decided that was the issue. I ordered a new PSU, same 750 watts. Old one out, new one in, turned it on and again...nothing happened. The fan didn't spin up on the new PSU either. The same LEDs as before came on the mobo and gpu but nothing else.

At one point I also swapped the single RAM stick with another I had that I knew worked, but that didn't change anything.

At this point I don't know what to do. Is there a way to test the motherboard? What else could stop the PC from doing anything at all? I've never built a PC before but I've installed/swapped several parts.

I don't want to spend a ton of money to revive this 10 year old hardware but I was willing to drop ~$60 on a PSU. Please let me know if you have any ideas.

Thanks for reading.

I'm looking for a new laptop as my current one is falling apart, and one option that seems quite tempting at the moment is getting a desktop machine, leaving it running away in the background, and then accessing it using remote desktop software from a laptop (or even tablet) most of the time. My logic is that I want a fairly decent device for programming on and occasional games, but I also want something portable that I can carry into every room of my flat. I've also been experimenting more with Tailscale and using my laptop as a remote development machine and my phone as a dumb terminal while traveling abroad, and that's worked fairly well, so I'm interested in how far I can take this concept. Plus the idea of also being able to use my main device as a small homelab is kind of appealing as well.

The plan would be:

• Framework Desktop sits somewhere at home and is on all the time. My wife has a Framework laptop that she's quite impressed with, I realise the value proposition for desktop computers is less given there's already so much possibility to configure and upgrade, but I've never built a PC myself before and I don't want to complicate this setup too much.
  '* A dumb terminal device that I can carry around with me. For now, that'll probably be my current laptop as long as it lasts, but in the future maybe a cheap Chromebook or even a tablet that I can connect a keyboard and mouse to.
• Moonlight/Sunshine setup for the remote desktop side of things. From what I can tell, this can stream both individual applications but also the whole desktop, and works with various clients.
• Tailscale to access all of this outside the home. This is less important but it would be convenient. And if I go down the homelab direction, also for being able to access my self-hosted services remotely or running my personal website off my own hardware.

Things I'm concerned about:

• German connection speeds are, broadly speaking, poor, especially with upload speeds. I'm looking at maybe 300M down, 50M up. Inside my local network that won't affect me, but if I did want to take my laptop with me, I don't have a good sense of whether the remote desktop aspect is really feasible.
• The Framework desktop - I like the company, and I like the idea of a repairable desktop that's still sold as a single unit and not something where I need to buy everything myself. But I also don't have a good sense of how much of a premium I'd be paying here, vs either building something completely from scratch or buying a more typical desktop
• The laptop would probably live in the living room because that's where all the other technology (in particular the modem) in our house lives. It's fine if it makes a noise while I'm actively using it to watch things, but I'd need it to be very quiet the rest of the time. Framework does sell a fan that is specifically designed to be quiet, but I'm not sure if this is "it's quiet compared to having a normal computer fan on" or "it's quiet compared to having turned all my devices off for the night".

Does anyone have any experience with this kind of setup, and is this something that would reasonably work, or am I completely missing something obvious that makes this a terrible awful idea that nobody should do?

Thanks in advance!

I'm looking to replace my current mechanical keyboard which has a few problems. If anyone has recommendations I would appreciate it.

Here is what I'm looking for:

• Mechanical switches
• USB C and bluetooth.
• Smaller size (no keypad)
• Clicky but not too loud. I think I currently have "brown" switches which are good.
• Backlit (but not colorful unless I'm able to set it to something muted or single-colored)
• Works with mac, pc, linux, and maybe tablets

I don't care very much if there is a battery in the unit as long as it can switch to bluetooth while plugged into usb.

I went to mechanicalkeyboards.com and looked around and got a bit overwhelmed. Looks like the prices are mostly under $200 which would be ok.

What went wrong with my current keyboard:
It's an EPOMAKER TH80 pro. The size is good, the features are good, and the keyboard feel is good. But the battery went dead so it has to be plugged in all of the time, and several of the keys get double presses at random so I have to backspace a lot.

Thanks!

Came to post and saw this thread popped up 5 hours prior (okay, near 7 hours as I'm still trying to look). So please help them first!

Sadly, while a lot of the requirements are the same, it doesn't offer what I'm looking for. Here are the demands (and here is why I cannot profit from it):

• USB A or C wired (no BT or detachable connection)
• Full 100% size

Similar demands are:

• Works with Linux
• Cherry MX (or comparable) switches - red or brown level
• Backlit with custom coloring

Honestly, Ducky seemed to be exactly what I was looking for, but I see no "buy" option, nor are there Linux options. Yeah, they're on mechanicalkeyboards.com but the third party is disconcerting and also the options I want are out of stock.

It looks like we’re finally getting some real options in the space, so I’m interested in people’s thoughts and experiences!

I’ve been running a pair of LG 27MD5KL monitors forever, and they’ve been largely great - but they’re really showing their age at this point, and I’m being forced to upgrade either way because my new job requires using a Windows laptop (likely a Dell Pro 14, but TBC), and those old LGs use an esoteric dual link DP variant that only Apple supports. I’ll also be keeping my personal MacBook Pro, so smooth compatibility with both is a must. Use will largely be software work: lots of documentation, lots of terminal windows, lots of dark mode, but some design review work as well where decent colour accuracy helps.

Options I’m seeing at the moment are:

• Asus ProArt PA27JCV
• Asus ROG Strix XG27JCG
• LG 27GM950B
• BenQ MA270S
• Apple Studio Display
• Apple Studio Display XDR

I get the impression that Apple’s the better option where possible, but I’m concerned about compatibility, especially when I don’t directly control the choice of laptop. If anyone has real world experience on that one I’d be interested, especially the difference between “technically works on non-Apple laptops” vs “is an equivalently good experience on non-Apple laptops”.

I’m guessing just using separate inputs for each laptop will be fine on whatever I go for, but I’m open to getting a KVM if needed (L1Techs? I haven’t actually checked how hard it is to find one that supports 2x 5K yet…). Couldn’t immediately see anything that’ll take Thunderbolt input from the Mac and HDMI input from the Windows laptop and push both to Thunderbolt output, which might otherwise have been a way to bridge the Apple display question.

Probably going for 27” 5K rather than 32” 6K, unless there’s a compelling argument for the latter. I briefly tried a Dell 32” 6K a few years back and other than horrible backlight bleed, sitting that close to a 32” display ended up feeling like I was craning my neck rather than moving my eyes to see edge to edge.

So, what do people think would be best here?

Sending up a bat signal for @gary and @ButteredToast - you guys both know your stuff on this one!

I have an older kobo (Kobo Libra H20) and have been using Calibre, and basically manually plugging it in and syncing books over to it.

I'm wondering if anyone knows of any good ways of doing wireless sync?

I've looked into KoReader but not sure exactly how involved that would be to set up. I am comfortable setting up something "SelfHosted" as long as I can easily spin it up and spin it down, I don't currently have any computer I leave on 100% of the time.

I've seen previous topics here, and Booklore looked interesting, but when I went to track it down it looks like the website is down (the GitHub is still there though), and apparently lots of controversy surrounding it in some reddit posts...it looks like there is maybe a fork of it (Grimmory), but I'm wondering if anyone here has experience with it or anything similar.

I'd prefer something without a lot of AI/LLM use, but not sure how realistic that is.

I only read eBooks, not manga/visual novels, and I don't listen to audiobooks so I don't necessarily need anything with support for any of those.

I would also be fine paying for something, but preferably only a one-time fee not a subscription.

I primarily read books on my Kobo, but it would be a "nice to have" if I could somehow sync to my iPhone (or Apple books) and iPad, but not required (and I don't need it to sync progress between devices, as I'd pretty much only be reading on one at a time).

Additional "nice to have" would be the ability to add books from any device.

Any suggestions? Just use Calibre content server? Or is there something "better"?

My current headphones (Philips TAH8506) are pretty worn out from daily use and recently a bit of plastic on the side cracked, so I figured it'd be a good time to get new ones. Since I know very little about literally any audio hardware it seems a good idea to ask here. Things I'm generally looking for:

• must be over-ear
• decent sound quality; I'm not going to pretend I'm an audiophile, the ones I have now are sufficient so anything as good will do
• connectivity: this is where things get tricky. My current usage is being connected through a jack when using pc and bluetooth when using my phone. These 2 connection modes are a must for me. However, I'd also really like if I was able to connect to pc over 2.4gz with a dongle because bluetooth latency is, frankly, awful. It's mostly why I use a wired connection to pc.
• microphone is not needed (in fact I'd prefer if they don't have one)
• ideally not more than $200
• available in Europe without oversea shipping
• nice to have, but not required:
  • a way to control playback (pause/volume etc) from the headphones. The ones I have now have a touch panel on the right and I occasionally use it (but probably wouldn't miss it)
  • ANC
  • cat-resistant cables (probably no such thing exists)

I'd also appreciate general pointers regarding which brands provide good quality at a decent price to make searching easier. Thanks in advance for any answers!