I went to university for computer science up until the pandemic started. It was great. I remember working on so many projects that were basic but a lot of fun and others that were a lot more complex but still fun and rewarding. For example, one of the staples of beginner projects is Conway's Game of Life. I remember building that in HTML, CSS, and Java Script. One of my other favorite projects was a website for alum to visit to see alumni news and events, and also to lookup other alum.

What were your favorite projects when learning to code?

Many of us listen to whatever music strikes our mood, but there are some out there who, in addition to mood, listen to and appreciate music in focused listening projects. It could be a discography of an artist you want to finish, or it could be listening to all the top 10 albums from each year. There's really no end to the listening projects we get ourselves involved in. I'd like to open a discussion about this.

I've been involved in a number of listening/appreciation projects over the years. For example, even though half the year hasn't elapsed, I've already finished my 2023 Listening Challenge, in which I listened to 50 albums on a variety of criteria.

Right now I'm discog diving some of my favorite artists, and the experience has really opened my ears to the lesser-known avenues of exploration. I've completed so many already, satisfying my urge to always be doing something goal-oriented. Right now, for example, I'm listening to The Musings of Miles as part of my Miles Davis discog dive.

So what are you into project-wise? Please share your experiences!

In my infinite wisdom I posted this to r/myog yesterday, just before the blackout started. I'm going to repost it here as a way to gauge how well it fits in on Tildes – this type of post is pretty central to the r/myog community and I am hoping some of us can migrate here.
 

Goldilocks Pack

 
    In April of 2021, lo these many years ago, Reddit user savvlo posted in the r/myog Swap Thread that he was placing a wholesale order for Ecopak Ultra EPL200 and was wondering if anyone wanted a few yards. I had heard of this material and was eager to get my hands on some; none of the major UL pack manufacturers had started offering it yet and the only way to have an Ultra backpack was to build it yourself. I had the skills (4 or 5 packs already under my belt) and I aimed to be one of the first.
 
    Well, so much for that. I fell out of love with MYOG for a year or so, and by then the project seemed so insurmountable that I didn't even know where to start. I did plenty of designing and redesigning (because that's the fun part) but the truth was that I just didn't really need another backpack, so there was no motivation to start a project that would consume dozens of hours. And then finally, this spring, my trusty old Hyperlite started showing its 4000+ miles and gave me the kick I needed to actually make this damn thing.
 
    You can guess from the title that this pack fills a hole in my lineup – for years my two pack options were my 40L Windrider and my 27L summer pack, and most often I found myself wishing I had an in-between option in the 33L range. The MLD Burn fits right in that pocket and after seeing one in action on a high route trip with a friend I knew that was going to be my model. The overall dimensions of my pack match the Burn exactly; the main modifications I've made are to the pockets, straps, and components. The comments in the Imgur album go over the specifics.
 

*this is just my best guess, I don't have a good way to measure volume
 

Thoughts

    I'm from the Midwest and I hate tooting my own horn so you'll know I speak truth when I say that this is, undoubtedly, my finest work. Other than a few trivial mistakes everything pretty much fell together perfectly. This is not normally the case with my projects and naturally it makes me quite nervous.

    The one thing I can't get over is this fabric! I can't believe this stuff only weighs in at 3.5 osy. It feels so much tougher than the Hybrid DCF I'm used to working with; it's so hard to cut through even with my sharp sewing scissors. Only time will tell if this pack really is as tough as it feels, but my hopes are sky high. Thanks for reading and looking at my pictures!

There was quite a bit of interest in last week's thread and I'm happy to say that I'm finally done with this project!

It has taken about a month and a half, it's full coverage 100 stitches in diameter - 18 cm using 14 count aida - and thankfully fit perfectly into my grandmother's hoop! The pattern is by Sarah Baumann (NeedleMinderLair on Etsy)

Anyway, here's The Kawaii Wave off Kanagawa!

The concept

It's a box that contains a receipt printer and an interface with several buttons. A user would press a button that reflects their emotional state (happy, sad, anxious, etc.), then the machine prints out a more-or-less appropriate poem on a receipt printer, beautifully formatted and embellished with simple artwork.

It could be occasionally repurposed for certain themes, like Pride Month to print out queer poems.

I want to place it someplace public and well-trafficked, like Dolores Park or on Castro Street.

Feedback

I like poetry. The idea of a (free) vending machine that gives me a poem to uplift my day excites me. But I wonder if this appeals to others enough to be worth fully realizing. I don't want to spend time and money building something that'll go totally unloved.

Also curious about anti-vandalism measures or ideas. I'm sure some jerk will try graffiti-ing it or peeing on it.

Lastly, anyone interested in collaborating?

I bought a colour eInk screen last summer and had a bit of fun getting it to talk to my shared Google calendar that runs our house. Recently I finally got around to making a frame for it so it can sit somewhere prominent and tell us about upcoming events. It's basically just a raspberry pi zero hat, so it's debian underneath. There's some slightly hacky python to make it (a) talk to Google, (b) mung their API output into something useful, which turned out to be HTML which is then "screenshotted" to create a PNG which can be sent to the eInk display. Updating takes about 30 seconds in total, partly because the pi zero is slow and partly because the refresh rate of the screen is in double-digit seconds. Works in full sunlight though, which is nice, and it's a much nicer screen than it looks in photos.

Screen is this one here. Pi Zero is a pi zero, the frame is flamed oak, the base is beech, the copper is copper. If there are no events in the next week, it shows a random picture instead (and boy, if I thought rendering html was slow on a zero that's nothing on 7-colour dithering a jpg!)

I mentioned a small age ago that I'm teaching myself to make a skirt. I finally have progress I'm ready to share! The buttons are just sitting on there, and it needs a waistband, but it's nearly ready!

Taking shape!

I have a Platypus Hoser water reservoir. And I have a metal canopy bed. Awhile back, I realized that I can hang the water reservoir from one of the top rails of the bed, and it gives me a way of drinking water in bed, with no risk of spilling it on myself or my bed, and without even needing to sit up.

The only problem is, it leaks. It's a very slow leak, but it's dripping onto my bed or the carpet next to it, which obviously I'd like to avoid. And occasionally a droplet will fall on my outstretched hand or arm as I'm falling asleep, which tends to jerk me awake.

You can see from the picture of the water reservoir above, the hole for hanging it is at the top, and the outlet for the hose is at the bottom. The way I'm hanging it now is just by threading a short length of "velcro tape" (tape without adhesive, but with velcro on each side so that it can stick to itself) through the hole and then around the top rail.

So the way I have it now, all the water pressure concentrates on the spot where the hose screws on to the reservoir, and no matter how hard I tighten it, it still finds a way to leak.

What I'd like to do is find an alternate way of hanging it, so that it's laying flat and there's much less water pressure on the outlet. Ideally I could also wrap the reservoir in a hand towel or something to absorb any leaks rather than letting them drip onto my bed.

What I vaguely have in mind is that I'd like to build a "sling" of sorts that I could hang from the rail, and then lay the reservoir inside that sling. If I could find a very small plastic tarp (say 18 inches square) with metal grommets on each corner, that would more or less do what I want. But for understandable reasons, no one seems to make tarps that small.

I'm sure there's something along those lines that I can assemble from inexpensive / easy-to-find parts. But...I can't think of what it might be.

Over the last couple of years my sister has been getting into HEMA (Historical European Martial Arts) and especially the longsword. She recently had a significant birthday so I thought I'd make her a small, but realistic and functional, longsword. It went pretty well, if I do say so myself. I did not, however, take as many photos as I would have liked, but I was doing this thing in very short bursts so I only had a few minutes here or there to get this done.

To start, I read a bit about longsword proportions, looked at some pictures and sketched a couple of possible designs, before finalising a 1:1 scale drawing to work from. I bought some O1 tool steel (carbon steel so it can be hardened and sharpened properly) and started to cut. Almost immediately I made a mistake, I cut the steel 25% too long. But that was OK, I just went with it.

I roughly shaped the metal and got it in the forge to heat-treat. Plunged into oil then slammed hard into my newly-built plate quench (aside: the plate quench is two hefty slabs of aluminium, designed to suck heat out of the steel fast, while holding it flat to prevent warping). The plates worked, the metal came out dead flat and not at all warped, which was good because there was very little space to grind out any distortions. I heart plate quenching.

Next, cutting up some brass to make the crossguard. Cutting a 1.5x3mm slot in that was incredibly frustrating. I broke all four of my remaining 1mm drill bits, eventually had to resort to very fine diamond burrs and going extremely slowly. Luckily there is a bit of overlap from the blade so the slightly messy slot is covered up a bit. Similarly for the pommel, which was cut from brass rod and shaped on my lathe before I totally botched cutting a hole for the tang. If anything I made more of mess of the pommel, during the final fit up I just filled it with glue and wedged it in the right place.

Inbetween making an awful - albeit recoverable/hideable - mess of the sword hardware I also finished up shaping and finishing the blade itself. This is where I don't have a lot of photos, but I ground a bevel onto the blade and wondered about cutting a fuller (groove down the centre of the blade) before realising that I absolutely did not have the tools to do that and would make a total mess of it. I also thought about sharpening it to scary sharp but given my sister has two reasonably small children I left it fairly blunt. It'll make a good letter opener but not much more. If she wants it sharp I can always put a serious edge on it another time.

Final pre-glue fit up, as you can see it matches the design drawing pretty well, apart from being to a slightly different scale.

I had considered making a wooden handle, as is traditional, but I was running short on time and I had plenty of leather so instead I did two layers of wrapping. This is the base layer (I do not remember why I have 1mm orange leather but I do) wrapped and clamped so the glue can dry. Another layer went on top of that and I ran a final polishing disc over everything, put a very light coat of metal lacquer over the metal to keep it shiny and that was it. Sword done.

I cut a piece of round bar steel, cut and forged it to shape as a support, treated the hot metal with beeswax (gives a lovely black finish which stops rust and looks nice). I set this in some flame-finished oak and gave that a coat of tung oil. Once the various finishes and glues had dried it was good to go.

The final product, dangling point, handle detail, view from above and in my hand for scale

I think this is one of the best things I've ever made. I hope my sister likes it. I have some metal left so I might try making another - there's a few things I'd do differently.

Is anyone else finding time for crafting these days? I'd love to see/hear about what you're working on!

I have spent the last month very slowly drafting a pattern for a skirt. After much time spent feeling apprehensive about cutting fabric (it's only an old bed sheet, but still) to test my first effort, last week I finally put scissors to cloth and sewed it together. I made several mistakes, but was so happy to have finally gotten that far, I didn't even feel bad about them.

I have a new basic block pattern drafted, and have even added a kick pleat so I can practice making that part. The new pattern has been cut and is ready to sew. 🤞 Here's hoping I did a better job this time!

I'm mostly just curious what types of in-depth projects you all get up to. The weekly "what are you working on threads" are always full of cool things, so I am curious what people's self-rated most difficult or complex projects have been.

I so miss feeling comfortable shopping in person this past year, but have really appreciated businesses that offer non-fussy, non-privacy-invasive curbside service, including and especially my local craft store. Place an order online, call when I arrive, they bring it out, and bam! Back to the craft room!
You know how sometimes what comes out to your car wasn't what you were expecting, though? Well, now I have a bag of poly fiber fill half as big as I am. Umm, which is... yeah, a lot. But, this last week I found considerable delight in making these two plush toys. The first is a gift for a friend with a soft-spot for small, unfortunate creatures. The second I thought could be a study for a self-drafted Cereberus. Maybe. I do hear the call of non-stuffed projects...

Eek!

Snout
Flank

✂️🧵✂️ Sanity through crafting! ✂️🧵✂️
While I wait for supplies to come in the mail for my next sewing project, I made use of my hot glue gun and some odds and ends to learn something new and make this boutonniere for my step-son for Valentine's Day. The pink felt is leftover from another project and the green started life as a protective layer for storing that came with a pan. Here's hoping he wants to wear it! 🤞
Front
Back

I’ve been wanting to get in to hobby electronics now that I have some free time, but I’m not sure what I want to start with. I am super interested in building an 8-bit computer but I’m curious what other types of things people have built or are building. Feel free to talk about any Raspberry Pi or Arduino projects as well even if they’re not strictly ‘hobby electronics’.

A while ago I mentioned I was going to attempt making a knife for the first time. Well, I did.

Apologies in advance for there not being many photos of the process - steel is really messy to work with so I mostly kept my phone safely out of the way. I'll try to get more pictures next time, although there are plenty of videos and picture tutorials around if people are super interested in the process. I shall endeavour to describe what I did in text, however.

I started out with a bar of 01 tool steel (wiki) which I cut into a rough knife blank. This I then hit with a ball hammer a load of times to get some texture. Then I used a belt grinder to put a bevel on the edge side, although only enough to thin the knife down to roughly the right shape, not actually sharp. Once that and a few other minor shaping tasks were done, it was time to heat treat it.

Heat treating changes the structure of the metal to make it harder. Hard steel will hold an edge longer, but it does make it much more difficult to work, hence doing most of the shaping before heat treating. To harden steel you need to heat it to a particular temperature, which depends on the exact alloy being used but 'bright orange' is close enough. Fun fact - when steel gets to it's 'critical' temperature, it stops being magnetic, so that's another way you can test it. The steel is then quenched, this one in oil, which makes it hard.

Hardened steel is very brittle so it's usually tempered after hardening. For 01 steel that means putting it in an oven at 160-200C for a couple of hours. You lose some hardness but you gain back some toughness and flexibility.

After tempering, cleaning, polishing, polishing and so much polishing. Steel is so dirty and difficult to work with compared to the silver, gold and copper I'm more used to. But eventually, and after glueing and bolting a sycamore wood handle on, then giving it a final sharpen on my wetstone, I had a knife.

It is a Japanese-style Nakiri knife. Usually used for cutting vegetables, it's really nice to use. Lightweight and agile, the balance is nice and it's comfortable in my hand. It's not perfect and there are a few things I'd do differently but I can see myself using this on a daily basis. More pictures

I have already laid out and started shaping my next knife, which will be a slightly more complicated bunka knife

Any questions, please just ask and I'll do my best to answer.

What creative projects have I been working on? It’s almost a labor to answer that one concisely, hence my lack of participation.

My mind is of never ending creative ideas, some great and some not, most not.. but they don’t ever seem to stop. I also like to be creative, and as a result, have ended up with more “started” projects then I’m willing to count.

So my question to fellow traverses of the tilde-verse is, what are some methods you use to sustain productivity in individual projects when creativity itself inspires starting new projects?

I've been slowly learning python for some months already. I used the Python Crash Course book from No Starch Press, it teaches the basics and then goes on with some projects with pygame, matplotlib, etc.

However, I feel that my Python skills aren't very good yet, and before learning to use libraries I would like to have a better command of the standard library.

I have been looking for some book with projects or, even better, challenges using just the standard library, but haven't found any good ones. Most of them either are for absolute beginners, or use additional libraries, or are very technical and without focus on practice.

Do you know of any good book or resource with challenges or projects that don't depend on additional libraries? Or, do you have any idea for a project or challenge using just the standard library?

Thanks in advance!

Whether it's for for school, work, or a hobby, share a project or goal that you are working on and how it's going. If you're trying to accomplish it, it fits here. Writing a book, making a program, perfecting a recipe, beating a challenge in a video game, fitness PRs, etc. - all is welcome.

EDIT: I just realized there's a monthly thread similar to this in ~creative, so I probably won't post like this again. But feel free to keep sharing here! This one I suppose is a bit more open ended.

A few people have expressed interest in my indoor, semi-automated growing setup so here's the lowdown.. In a corner of my workshop is a cupboard with a footprint of 1.6x1.2m, 2.2m high. This is insulated with a mixture of glasswool, foam board and expanding foam (depending on what I could install where), and lined with diamond pattern aluminumised mylar (the diamond pattern provides diffuse reflection to avoid hotspots).

Inside the cupboard I have 750W of full-spectrum LED lighting, a 500W oil-filled radiator, and a small fan to keep air moving around. There's a vent which pulls air from the outside and a extractor fan which also vents outside. Being able to pull cool air from the outside (even in summer) is extremely useful as the lights can put out quite a lot of heat.

My main growsystem is an Amazon low-pressure aeroponics system, and I've also got some airpots to do some soil-based growing in. Aero on the right, pots on the left. If you're not familiar with aeroponics, it's a system where the plants roots hang in open space and nutrient-rich water is sprayed or misted over them. High-pressure aero uses mist and low pressure uses sprayers. High pressure aero is currently one of the best known ways to maximise plant growth but low-pressure is pretty good too and you don't need anywhere near as much gear like pressure vessels and solenoid and so on. I just have an aquarium pump which drives the sprayers. In my experience aero is considerably more efficient than soil, non-soil media or other hydroponics - but on the other hand it's very twitchy. If your nutrient balance is off or your pH is wrong or worse, you pump fails - things can go wrong very quickly.

The airpots are totally new to me. People say they're good but I have no idea. I have a mixture of compost, perlite and coco coir to go into them so we'll see how that works out. I'm going to use organic nutrients only on them, I have some seaweed derived stuff which should be good throughout the entire grow process.

So that's the hardware, now on to the fun bit - the automation...

On top of the cabinet is a board hosting a Raspberry Pi model A - these days I'd use a Zero W but they didn't exist when I built this. In it's mostly-bare state the board looks like this. Quick explanation - the red board is mains-rated relays which let me switch the connections above it on and off using the Pi. This is where the lights, fan and heater are wired to. The small junction block left of the relays is connected to mains.

The block up and left of the Pi is 5V, which drives the Pi, the relay control electronics and provides power to the junction block on the right. There are various sensors wired in to that block and connected back to the Pi.

Wired up on my bench for testing it looks like this, and in situ it looks like this (this was on a previous iteration of the cupboard but it's basically the same now). The orange cables on the left are lights, fan and heater. The black cables top are the sensors.

Temperature is monitored using five DS18B20 sensors, which are cheap and reasonably accurate serial devices so you can run a whole bunch of them off a single pin on the pi. I monitor my water temperature, the temperature at the plant stem, at the wall, inside my workshop (but outside the cupboard) and outside temperature. The wall/stem temperature is the important one, that determines whether heating or cooling is engaged. I monitor the exterior and interior temperatures to know how effective my insulation is being. If water temperature gets too high I might add an agent which protects against microbial infections that like warmer water.

I do have a DHT22 humidity sensor but they're hella flaky and it's currently not working. I will replace it at some point but past experience suggests humidity is high whatever I do.

The Pi has a python script which runs every five minutes. It reads all the sensors, decides what (if anything) to do, then logs everything in a sqlite database. If it's 'night' (which is actually day outside, for temperature management reasons) it turns the lights off, if it's 'day' it turns them on. If it's cold it turns the heater on, if it's hot the fan. There's a bit of smartness where it actually aims for a midpoint of temperature because otherwise it's always aiming for highest temperature then immediately cooling again, then heating and so on - a stable temperature is better for the plants. At 'night' I tend to run the fan to drop the temperature: plants often like it cooler during darkness, get some fresh air in and attempt to lower the humidity a bit.

There is a web interface which lets me see what's going on - current temperature and status, plus some lovely lovely charts (who doesn't love a nice chart?). I can also turn the lights out from here in case I need to go in an do some maintenance for anything. 750W of LED light is painfully bright, it's much more comfortable (and safer!) to turn them off while topping up reservoirs or changing water or whatever.

It would be relatively trivial to add sensors for moisture or pH to add an auto-watering or auto-adjusting nutrient systems, but I haven't felt the need to do that yet.

Happy to do my best to answer any questions anyone has.

I am currently trying to learn how to fix things myself by learning how to solder and fix things like that. I also want to DIY some things for quite some time.

My current project is working through the book Make:Electronics , I bought it at humblebundle some years ago. Yesterday I powered a led via a power outlet for the first time, by connecting it to a cut off USB cable. I'll share a picture of the abomination later.

So: what have you built at home? What are you building? What are you planning to build?

Album link

So we have had this popcorn machine for ages and just recently it completely stopped working. Being a fan of bigclive on youtube I though why not try fix it and maybe get a sense of how it works.

The guts

The insides honestly are pretty underwhelming - both the impeller and heating elements are quite small considering it only takes a few minutes to make a bowl of popcorn.

Circuit board and Another shot

Considering how few components there it was not too time-consuming to draw up a diagram. Please excuse the crude drawing.

From what I can tell it uses a bridge rectifier with a some caps to convert DC and even out the signal - and what looks like two resistors to further drop the voltage to the motor, maybe two offered better cooling? idk why they didn't use one. It's also kind of interesting how they used two separate coils for the heating with one of them in series with the motor, that will drop the voltage right?

They also have overheating protection here, with a an sefuse and a thermo switch, it actually has the piece of metal and a contact that will bend away when it's hot, I've only seen these in a textbook. Not sure why there are two types of thermo fuses?

The fault

Finding the fault ended up being quite easy, the main heating coil that comes off blue wire had melted. A piece of corn, oil, bits of salt or a mixture had found their way in and somehow melted the wire in multiple places. It cut the circuit so not even the motor was working which was my initial though when it stopped. I wound some solid core wire around the two ends, hopefully it will not unfurl or melt in the heat.

https://drive.google.com/drive/folders/1s2iTsjvNthl8cmgvcF7q2vUewu69mGLb?usp=sharing

It's missing a screen decal and some software tweaks, but the #MAME#Sega arcade machine is about done. I really wanted to built something that could handle a game of Street Fighter 4 as easy as it could swap to Daytona USA on Model 2 or Virtual On using Demul.

Here are the components.

1 #Thrustmaster wheel and pedals2
Six button Sanwa/IR arcade controls sets
2 8 way mini flight sticks (For Twin Stick games)
1 Ipac ultimate

I'm a first time wood worker and vinyl applicator, and have a long long list of things that I learned not to do in the future. I'm still figuring out what the best way is to run all of this gear, but so far so good. What's not evident in this photo are the 1/2 lines of plexi that live beneath the decal around the perimeter, and that are illuminated with addressable LEDs. The window in the speaker area (speaker grills are coming, still) has a Dreamcast swirl LED sequence that travels through a spiral inside as well.

**As far as hobbies go, this one had a big learning curve and required the purchase of a few tools. That said, it was totally worth it.

Someone recently asked me to replace the battery in their old iPod, and I found myself wondering what I should do with the old battery. It still works, but has less capacity than when it was new. So I looked around my workshop and found some of these surface mount LEDs and decided to test the limits of my soldering skills and make a flashlight out of them.

These LEDs are very hard to solder, since they're surface-mount and the pads are on the bottom of the LED. They were never meant to be soldered by hand, but rather placed by machine onto a specific amount of solder paste, which is then baked in a fancy oven at very specific temperatures for very specific times. To solder these by hand, you need to create a liquid puddle of solder and sorta float the LED on top, while being careful to not short the pads which are very close together as well as not overheating the LED. The temperature the plastic melts at seems to be only a few degrees higher than the solder melts at.

I wired up 5 of the LEDs in parallel, each with its own 6.8ohm resistor wired in series with the LED. This should limit the current to 150mA per LED. I hot glued this in place, as well as a lithium battery charging circuit I got off ebay for a dollar. Here's one such listing.

I slapped on a pushbutton, and Bob's your uncle! It worked first try!

Here's a blurry picture of the finished product. I'm pretty proud of how it came out, considering how tiny and fiddly the soldering was. And, I think I'll actually get some use out of it too. The battery ought to last at least an hour of runtime, and the thing is seriously bright.

Anyone here into electronics as a hobby?

Edit: Better-ish pic: https://i.imgur.com/Kxqy1jg.jpg

^{No potatoes were harmed in the making of this photo.}

For any sort of art in general. What are you excited about creating?

For me, I'm a photographer, and I've got some plans for some large format shooting during my camping trip. Because my trip lines up nicely with a nearly new moon, and I'm going to be in an area with nearly no light pollution, I want to try capturing the Milky Way on slide (color positive) film, and also doing a shot of some star trails behind a lighthouse in that area, or star trails reflecting off the lake.