As per title this is inspired by my recent problems with a Latitude 7320 notebook.

I can't use my desktop right now and so wanted some cheaper nb for normal usage and eventually settled on this model due to being able to get it at an acceptable ratio of price to age and seeing it as compatible on Ubuntu, not noticing the disclaimer until later.

The problems started right after installing Fedora KDE - the nb was running at absolutely abysmal performance and this problem affects several models.

Running passmark I've got above 2000 on cpu, on Windows I had 11000. The cpu was throttling to 1500Mhz and lower for no reason. Switching a BIOS setting of power management to "ultra performance" got me to twice the score.

Eventually using throttled from github for various Lenovo and Dell models and thermald I was able to get to twice that again, still a fifth less than on Windows. Also the repo has potential of security concerns due to how it works, also potential to just stop working due to them later.

Mainly I'm posting this to just say that there is zero legitimate technical reason why this should happen, it works on Windows and on Dell tampered Ubuntu images. The hw is fine but for some reason someone somewhere decided to artificially limit the hw for whatever reason.

Right now I am still indecided if I should write off the several hours I've spent on this and return the machine to play the dice with some other model.

Edit 5.4.: it turns out I was not using the throttled package correctly and now have roughly equivalent performace in Linux as in Windows up from the 4/5 or so after all the other workarounds. All of the points still apply though. I also heartily recommend s-tui as a nice utility for cpu monitoring and stress test.

Background:

I've been using a 9-year-old 13.3 inch Dell Latitude 7370 laptop running MX Linux to stream games via Moonlight from a beefier desktop machine. It is SO good and works flawlessly. My only complaint is the smaller screen size.

I would like to upgrade to a larger computer, and given that the computer will literally only be used for streaming games, it doesn't need to have great stats. I'm looking at used/refurbished models -- both for price and because buying something new feels like complete overkill for my needs.

My only requirements are:

• 17 inch screen
• USB-C charging

That's it! I'm assuming that literally anything I can get with that will work for what I need given that my small, decade-old laptop is already doing the same job perfectly. USB-C charging is a must-have for me. I already have USB-C power cords in all the places I plan on using it, and I don't want to have to use a separate charger for it.

My Situation:

Because I'm searching for used/refurbished models, I'm limited to what's available rather than going for any specific model of computer. I can easily find listings for computers with 17 inch screens. What I can't find easily is whether or not they support USB-C charging. Most sites don't have a filter for that, and a lot of the listings don't specify the type of charger used and just list "AC adapter" (or don't mention it at all). Many sites don't have pictures of the ports, or the pictures they do have are stock photos that aren't of the exact model.

Is there some easy way to find these that I'm missing? Some keyword, or a site that does have a filter for that, or brand knowledge that can point me in the right direction?

Also, if anyone has any recommended sites for used/refurbished laptops, let me know. I have had success with Backmarket for used tech before, but I'm open to recommendations.

Hello, my friend recently lost their laptop (long story) and has kindly asked me to help them out to find a replacement.

I've had success asking here before, so I would be very grateful for any help or direction.

Here are the main criteria, based on what we've discussed.

• Can compile LaTeX.
• Can run Jupyter notebooks, Python, and the like.
• Can play non-AAA games like Binding of Isaac, Balatro, Dofus.
• Can play YouTube videos, and Twitch streams. (Not picky about screen quality.)
• Maximum 13" screen, can be smaller I think?
• As light as possible (a tablet + keyboard combo might be worth it).
• USB port for transferring files (to their institution's ancient printers)
• Ports to connect a mouse, gamepad, etc.
• Bluetooth, wifi, webcam
• Lasts at least four hours on battery (if not gaming)
• Under 1000 euros preferably (willing to make exceptions if you think it is worth it)

Here are the nice-to-haves:

• HDMI slot
• Long-lasting battery
• Nice mic and webcam
• Nice screen quality
• Repairable

Don't care about:

• Stylus
• SD card reader

My friend is mostly used to Windows but I think if I could make a strong case for Ubuntu then they might be open to it if that's relevant.

Thanks for reading!

—

Edit: Thanks everyone. We ultimately settled for an IdeaPad 2-in-1. Fingers crossed that they’re happy with that.

I might have to have two running laptops for work.

Desk space is at a premium. Right now I have my work laptop stacked on top of my personal PC on my desk ( tower, on its side, on a stand ).

Would a rack like this one, with a lap top on each shelf be enough to keep the magnets on the lids of each laptop from interfering with each other? What about protecting each laptop from the heat of the other laptop?

I already have a mechanical KVM. I will just need to buy one that accommodates more than 2 computers.

Please, let me know if I have overlooked any considerations.

Thank you.

Hi Tildes !

I was passively looking for an refresh of my current laptop (Thinkpad X1 carbon Gen 5; it's still working fine except some mysterious thermal profile¹), and a friend of mine working in retail told me he could sell me a Macbook Pro (the mid-range 14in one with the M3 Pro chip² at a heavy discount (more than half the price; it's a display model but he tells me it wasn't mistreated). It's a too good of a deal to pass on, so I accepted.

¹ it's constantly at 70C; I already changed the thermal paste and the battery.
² does that mean it's Macbook Pro Pro ?
³ and I guess the Thinkpad's going to be recycled as a home server. I half hope that running Linux on it will solve the thermal problem

My use case would be (in no particular order):

• photo/video processing: I know what I need and I already have a CaptureOne license. Davinci Resolve is enough (and plenty) for me
• programming (web dev, arduino; VScode's probably gonna be the second thing I'm going to install)(I'm kinda interested running a LLM locally, but have no experience with that)
• light CAD for 3d printing,
• gaming? My old gaming tower runs Elden Ring fine but struggle a bit with Baldur's Gate 3 (it's really the loading time, and loading textures), and it seems this MBP can run it fine.
• regular day-to-day browsing / office and adulting work

I would qualify myself as a power-user.

Background: I'm not entirely new to the Apple ecosystem. Back in uni I had the first unibody MBP sporting Leopard and then Snow Leopard. I then went with a X220t and then a my current X1.

Some questions:

• I see that BetterTouchTools is still a thing (back then I mapped three fingers swipe up to new tab, three finger swipe down to close tab, and twist to change tabs). I half remember one that was just a staging area living on a sidebar when moving file from one part of the finder to another (the name eludes me). Is there any other handy utilities I should be aware of ? That's also your prompt to plug in your favorite apps :)
• How's the dongle life (and what's the recommended one) ? While most of my stuff can be USB-C, I still have important stuff that requires USB-A (my photo printers, several portables hard-drive)
• Any interesting (gasp!) Android integration ? I'm not currently using any with my Windows machine (having Whatsapp/Telegram/Discord is sufficient), but I'm curious anyway.

I've recently come back to studying German, after having taken a small break for a few months for a new job.

My main form of study is immersion (I recently stumbled across the books of Walter Moers and haven't looked back since) and conversation practice on iTalki.

Nowadays, I try my hardest to only buy tech second-hand and preferably as future proof and modular as possible. My go-to machines are a fully modded Lenovo Thinkpad T430, and a more humble Thinkpad X230, both running Linux (Ubuntu and PopOS respectively). They work just fine for my basic needs (mostly surfing, some occasional streaming and word processing). But they struggle during my conversation lessons on iTalki or Zoom, most of the time either overheating or freezing/stumbling. I realize this might be a Linux problem, but I have also found the web camera and built-in microphone on both machines to be really inadequate for video calls. I gave up using my own laptops for my language lessons over a year ago, and now have resorted to stealing my partners Macbook, which isn't ideal.

Do you have any recommendations for any more recent laptops that would offer a better video conference experience, while offering at least a removable battery? Pricewise it would be great to be find something below €500 used.

I bought an M2 Macbook Air at the start of this year for uni. I only planned to use it for uni work as I have another 'more powerful' laptop that I use for everything else, but I kinda love the M2 and want to make it my daily driver laptop. Battery lasts for ages, screen is great, it's thin and light, etc. The problem is - as you might guess - I only got the 512GB model and if there's one thing Apple hates, it's people having control over their hardware, so no expandable storage. I can't afford to upgrade the entire laptop, so I need to work with what I have. Here's what I want to use it for:

• Graphic design: Adobe software, high-res images, typefaces, etc.
• Music production: Ableton Live 11 Suite, sample packs, plug-ins, project folders, etc.
• Music library: uncompressed .m4a files because iTunes hates Vorbis 😢, ~80% of my library (I don't have everything downloaded yet) is 25GB.
• Web-browsing: Firefox... this one isn't really relevant but I feel like I should include it for completeness.

Does anyone have any tips to stretch this 512GB as faaaaaar as it can go? I have a 2TB external SSD, but I'm wary of keeping anything important on it because it's small and I don't want to accidentally lose a bunch of stuff. I can spend a bit of money (maybe 30usd) if anyone has a good idea that requires buying something, but I can't spend any ludicrous amounts, I already did that to get the laptop!

I've been struggling with this for a long time. I want to keep my workflow consistent independent of my "workstation", and have identical dotfiles (like .bashrc, .vimrc etc.) on different devices.

So... How you personally deal with this issue, and what should I do?

Thanks!

I'm looking to buy a Framework 16 in its most powerful Ryzen config. I'm looking at this being the last laptop I need to buy because of its modular design, so I don't mind the heavy initial investment.

I'm looking to shave of $400-500 by buying parts externally, however. I wanted it to be 64GB RAM, with a 4TB OS drive to run Aurora on, and later on a second drive for another non-immutable LTS distro (probably Debian?).

If I can source the same RAM/Storage, is there any reason to actually buy them from Framework? I'm a bit confused by the huge price difference, since I can get the same memory and storage hardware from Microcenter for about $400 less total.

And if anybody has any experience with the Framework 16 as a daily driver, I'd be interested to hear any stories. I'm not getting the graphics module yet, but may down the road to see if it can replace my desktop fully. Drivers should not be an issue as Aurora has a Framework image that contains everything I'll need.

This link gives some useful detail about Dell Latitude model numbers.

https://en.tab-tv.com/dell-latitude-identification-and-decoding-of-the-laptop-model/

Unfortunately, it only goes up to 2017.

The first digit is the "series". There are several series, higher numbers are better.

The second digit is the screen size. 1=11", 2=12", ..., 7=17".

The third digit is the year. 1=2010, 2=2011, ..., 7=2016, 8=2017.

The forth digit is connected to form factor - standard, removable screen, transformer.

My question is whether there's a similar decoder ring for newer models.

EDIT:

Okay, so, newer models appear to follow similar convention, with slight changes to last two digits for year.

eg, Dell Latitude 9510 = premium ultrabook, 15" screen, released 2020.

eg Dell Latitude 7440 = ultrabook, 14" screen, released 2023

The first digit identifies the range:

• 9 = premium ultrabook
• 7 = ultrabook
• 5 = mid range
• 3 = entry level

The second digit is the screen size:

• 5 = 15"
• 4 = 14"
• 3 = 13.3"
• 2 = 12.5"
• 1 = 11.6"

The last two digits give the release year:

• 90 = 2018
• 00 = 2019
• 10 = 2020
• 20 = 2021
• 30 = 2022
• 40 = 2023

I'm in the market to hurl at a wall upgrade our badly ageing general use family laptop (Lenovo V110).

I've used ThinkPads in the past for work and due to their ubiquity there is a value to be had, I believe, in corporate refurbs.

However, it's been a good few years since I used one - think it was a T440 - and am looking for some advice on what the most recently obsoleted gen is that I should be looking for, or where people have found a sweet spot on price/performance. Any pointers?

Edit: I changed some windows settings based on advice here. The situation is improved and I am going to see how things go before buying new equipment. Thank you everyone

So I recently bought a new laptop. I use an external mouse, keyboard, headphones etc, all of which come with usb A connectors that worked well with my old laptop.

When the new laptop arrived there weren't nearly enough ports for either usb A or usb c so I invested in a peripheral that links four usb a connections to one usb c connection on the laptop. Edit, it is powered and plugged in. Now the connection with everything plugged in seems to be intermittent and the mouse and external keyboard don't work reliably.

I have read a couple of articles and I am even more confused but they seem to be saying that usb c is not plug and play the way usb a was. What the fuck. Why do this like this? What do I do now?

I just spent significant money on this computer and I don't want to replace a functioning mouse and keyboard

I'm looking to get a new laptop for when I want to go work at a coffee shop or something.

I have seen the Framework laptops and like the idea of a modular computer you can upgrade or repair.

I'm a little hesitant though. The last laptop I tried was to buy a Pinebook a year or two ago. I got it, turned it on once and it worked fine, but then after that it would just get a black screen when I powered it on. Some posts online indicated that it might be because the memory card wasn't seated properly and it might fix the problem to reseat it. But the tiny screws on the bottom were really tight and I ended up stripping one of them while trying to open it up, so now I just have a laptop I've used once collecting dust.

I want to make sure I have an easier experience with my next computer. Can anyone attest to the reliability of the Framework 13?

Hi all,

Has been a while :)

I'm having an issue with upgrading an SSD on a Lenovo x270 and thought I'd reach out for some advice.

I'm installing a SATA SSD (Crucial BX500) but the original caddy in the laptop is for a NVME M.2 PCIe SSD. The only part I can use of the original caddy is the plastic shielding that can fit around the new drive.

The issue is, now I have no shielding. The new drive will fit in the 2.5 inch slot the old drive was in but it rests on top of only two small pieces of foam glued to the board. Do you think this is an issue? Should I shield it somehow? Perhaps EMI tape? If so, should I shield both the top and bottom of the drive? There's no caddy I can find for this use case in Europe.

Any help would be appreciated.

p.s I am following this article: https://techblog.paalijarvi.fi/2020/01/02/32gb-ram-for-thinkpad-x270-and-other-pimp-ups/

As you can see, in their case, some metal foil (an EMC cover?) came with the eBay cable they bought to support the SATA connection. I'm wondering if that's nesscary.

I don't want to pay an extra thousand dollars for 'rugged' design suitable for military deployment, but the user in this case is not well coordinated at all and it should be able to survive being dropped.

I otherwise need sufficient memory and speed to boot reasonably quickly and to run standard text, spreadsheet and database programs without annoying lag.

Just wondering how other technically inclined individuals go about this.

For my daily driver machines I usually buy Macs and build towers, which are simple enough — on the Mac, figure out needs and slightly overbuy, and on towers put some research into parts to find those with the best reviews and bang for buck. Pretty straightforward.

I also keep around a generic x86 laptop though, and I might be replacing the one I have currently in the coming months. Shopping for its replacement unfortunately is not so clean and simple. There is to my knowledge no laptop-shopper analogue of PCPartPicker for laptops for instance and retailer search tools are terrible (especially Amazon's), which makes filtering out the noise practically impossible. It gets even harder if you're looking for certain features and especially less tangible things like build quality, QC, and battery life. Review sites often aren't of much help, with skin-deep reviews that frequently miss major points and pay little mind to things that may become issues in long-term usage.

And yet clearly, plenty of people are buying laptops, which brings me back to the topic question. How does everybody go about their laptop shopping?

I used to work in IT but left the field in 2018, so I'm not as up to date as I used to be on things. I'm looking for a new laptop to use for work (primarily word processing and web browsing), ideally something portable with a good sized screen (larger than 13"). I've had a Dell G5 for the last five years because I thought I'd do more gaming on it when I bought it, but it's largely just been a heavy brick in my backpack on travel.

Back in the mid 2010s, I recommended Lenovos to everyone who would listen, but I fell out of love with them toward the end of my IT career when the build quality seemed to be rapidly declining. I haven't really touched them recently, but my dad loves his Lenovo Ideapad Pro.

Honestly, something similar to a Dell Latitude might be what I'm looking for, but I'm open to any recommendations. I need a responsive keyboard and clickable trackpad. Bonus points if there's somehow a laptop out there that has a nub!

ETA: Not looking for a macbook -- will be running Windows!

I want to upgrade my gaming setup, but I want to move towards a desktop replacement laptop for the compact form factor to free up desk space or even get rid of a desk altogether. I also want to try out Pop!_OS since I know it has good Nvidia drivers and that most games are compatible with Linux nowadays.

Has anyone had any experience with switching to Pop!_OS from Windows? What is software compatibility like? Pros and cons?

Also is anyone here using an 18 inch gaming laptop? I'm interested in huge laptops since I'm not really planning on taking it on the go.

My T430 has been my main PC for a while now. Since upgrading the ram to 10GB's and switching to Linux Mint, I could not be happier with it.

I'm not very tech-savvy, so this whole project has been a great excuse to learn more about computers in general.

What is everyone else's Thinkpad project?

I'm looking to buy a new device and have started to look at chromebooks to see if it would be a suitable option. My use cases are pretty mundane:

• Online banking and other similar services
• Emailing
• As a tool for GMing RPG campaigns (probably managed through some online service)
• Stream video while traveling (eg Netflix, YouTube)
• Note taking & drawing (possibly with a stylus)
• Occasionally ssh to remote machines

Arguably the heaviest of these would be streaming, but I guess most devices can handle that decently. Since I won't be doing any gaming or heavy dev work (on the actual machine) I figured I don't really have very high hardware requirements. As such perhaps a chromebook would be a good option. There are some downsides, mainly for me that it is heavily tied to the Google ecosystem. Can chromebooks be easily jailbroken and run a lightweight window manager on Linux? If so does the device retain its battery life okish? Could I still use a stylus with the device? Would I be better off buying a cheap laptop and install linux on that?

Finally I've read that Google cancled their Pixelbook 2 last year. Has there been any updates or rumors of it coming back (I tend to like Google's hardware)?

The Framework laptop is a completely modular, upgradeable laptop that comes pretty close to higher end laptops in terms of performance and "feel". For those of you who have/want a Framework laptop, what does your build look like?

I've got:

• 11th Gen Framework with Intel i5 (not the most powerful, but I wanted to get something quickly and relatively inexpensively)
• Dual booting Ubuntu and Fedora right now since they appear to have the best Linux compatibility and Framework community support
• Expansion ports: USB-C on the left and right so I can plug the charger in from a multitude of angles and directions! And I've got a grab bag of MicroSD, standard USB, etc. that can be switched out.
• I'll upgrade the system at some point -- unsure of whether I should stick with Intel or move to the new AMD board. I guess I'm not really sure of the benefits of doing so...

What OS are you using? What's your laptop build, and what plans do you have in the future? Have you had any major issues thus far?