I watch Amazon Prime Video with Librewolf, but today I got the error message below. I already have DRM enabled. Any ideas how to fix this?

Prime Video is incompatible with your current operating system or web browser. You must update to watch Prime Video titles. Review the Prime Video system requirements. If the problem continues, please contact Amazon Customer Service and refer to error 7132.

Edit:

I fixed the problem by removing Librewolf and reinstalling it.

Hey guys.

I'm trying to make the connection between my system and Sourcehut. I created my Ssh key and added pub key to the Sourcehut. Added the private key with the ssh-add ~/.ssh/id_ed25519 code after the "eval" thing.

Whenever I try ssh git@sr.ht, it asks for password. I do not know what password it is and I'm entering my passphrase but it says permission denied.

On Github side, I managed everything without problem tho. Any hints?

EDIT: I removed Git and SSH keys completely. Reinstalled Git again. Followed the instructions step by step for the SSH keys and it worked this time. I have no idea what I did different this time but it works now after 3 hours of hell.. I suspect that I made a typo in config file in SSH directory. Thanks for comments guys! I love you all!

It's been a long time since I've done any "serious" programming, but I have long held a desire to recreate an app that's been out of development for a decade, and I reckon I'd do fine if given the right direction.

Googling for this gives me either "no code" platforms, which is zero of the fun and basically what I do at work, or documentation that has skipped the first ten steps because it assumes you know the prerequisites already. Help?

About a year or two ago, someone recommended a phenomenal dystopian novel about people who don’t have kids and are sent to live in a luxury facility where they serve a particular function for their remaining lives. It was by a Japanese author, I believe a woman. Does anyone know the name of the book and/or the author?

Bonus question: Any other Japanese sci-fi/dystopian/magical realism book recommendations?

The Issue

I'm streaming games from a desktop PC hardwired into my router (running Sunshine) to a laptop wirelessly (using Moonlight). It works beautifully.

Except, every five minutes, the stream chugs: my framerate drops precipitously, and Moonlight gives me a warning telling me I should lower my bitrate. This happens for only a few seconds, before it resolves and goes back to normal.

I timed the interval between the chugs several times and got approximately 5:07 between each slowdown. It is remarkably consistent.

Because it's so consistent, I assume there's some scheduled task or something running every five minutes that's causing it to chug. Dropping the bitrate makes the chugging less noticeable, but it still happens.

Ruling Things Out

I think it's safe to rule out the idea that it's my router or the host PC.

I have a smaller 13" laptop that I used to stream to, and I just recently bought a 17" to replace it. The five-minute issue only happens on the 17", even with identical stream settings (same resolution, FPS, and bitrate).

The computers are obviously different hardware, but they're also running two different linux distros.

The 13" Laptop is running MX Linux 23.5 (KDE). This is the one that works.

System:
  Kernel: 6.1.0-32-amd64 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    Desktop: KDE Plasma v: 5.27.5 Distro: MX-23.5_KDE_x64 Libretto September 15
    2024 base: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: Laptop System: Dell product: Latitude 7370 v: N/A
    serial: <superuser required>
  Mobo: Dell model: 0XFY7T v: A00 serial: <superuser required> UEFI: Dell
    v: 1.28.3 date: 02/07/2022
Battery:
  ID-1: BAT0 charge: 12.6 Wh (62.1%) condition: 20.3/34.0 Wh (59.6%)
    volts: 8.1 min: 7.6 model: SMP DELL WY7CG58 status: charging
CPU:
  Info: dual core model: Intel Core m5-6Y57 bits: 64 type: MT MCP
    arch: Skylake rev: 3 cache: L1: 128 KiB L2: 512 KiB L3: 4 MiB
  Speed (MHz): avg: 2496 high: 2758 min/max: 400/2800 cores: 1: 2400 2: 2758
    3: 2400 4: 2429 bogomips: 11999
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel HD Graphics 515 vendor: Dell driver: i915 v: kernel
    arch: Gen-9 bus-ID: 00:02.0
  Device-2: Realtek Integrated_Webcam_HD type: USB driver: uvcvideo
    bus-ID: 1-9:5
  Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915
    resolution: 1920x1080~60Hz
  API: OpenGL v: 4.6 Mesa 24.2.8-1mx23ahs renderer: Mesa Intel HD Graphics
    515 (SKL GT2) direct-render: Yes
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Dell driver: snd_hda_intel
    v: kernel bus-ID: 00:1f.3
  API: ALSA v: k6.1.0-32-amd64 status: kernel-api
  Server-1: PipeWire v: 1.0.0 status: active
Network:
  Device-1: Intel Wireless 8260 driver: iwlwifi v: kernel bus-ID: 6c:00.0
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
    bus-ID: 1-2:2
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1
    lmp-v: 4.2
RAID:
  Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
    v: 3.0 bus-ID: 00:17.0
Drives:
  Local Storage: total: 238.47 GiB used: 31.99 GiB (13.4%)
  ID-1: /dev/sda vendor: Toshiba model: KSG60ZMV256G M.2 2280 256GB
    size: 238.47 GiB
Partition:
  ID-1: / size: 232.43 GiB used: 31.47 GiB (13.5%) fs: ext4 dev: /dev/dm-0
    mapped: luks-a8eaaa90-b4ba-4943-8c1d-ddace5892f40
  ID-2: /boot size: 973.4 MiB used: 524.1 MiB (53.8%) fs: ext4
    dev: /dev/sda2
  ID-3: /boot/efi size: 252 MiB used: 274 KiB (0.1%) fs: vfat dev: /dev/sda1
Swap:
  ID-1: swap-1 type: file size: 3 GiB used: 3.8 MiB (0.1%) file: /swap/swap
Sensors:
  System Temperatures: cpu: 80.0 C pch: 68.0 C mobo: 48.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 251 Uptime: 33m Memory: 7.65 GiB used: 3.56 GiB (46.6%)
  Init: SysVinit runlevel: 5 Compilers: gcc: 12.2.0 Packages: 2789 Shell: Bash
  v: 5.2.15 inxi: 3.3.26

17 *    * * *   root    cd / && run-parts --report /etc/cron.hourly
25 6    * * *   root    test -x /usr/sbin/anacron || { cd / && run-parts --report /etc/cron.daily; }
47 6    * * 7   root    test -x /usr/sbin/anacron || { cd / && run-parts --report /etc/cron.weekly; }
52 6    1 * *   root    test -x /usr/sbin/anacron || { cd / && run-parts --report /etc/cron.monthly; }

The 17" Laptop is running Linux Mint 22.1 (Cinnamon). This is the one that has the five minute chugs.

System:
  Kernel: 6.8.0-58-generic arch: x86_64 bits: 64 compiler: gcc v: 13.3.0
  Desktop: Cinnamon v: 6.4.8 Distro: Linux Mint 22.1 Xia
    base: Ubuntu 24.04 noble
Machine:
  Type: Laptop System: Dell product: Inspiron 7773 v: N/A
    serial: <superuser required>
  Mobo: Dell model: 0R58C3 v: A00 serial: <superuser required> UEFI: Dell
    v: 1.19.0 date: 12/15/2021
Battery:
  ID-1: BAT0 charge: 34.9 Wh (97.5%) condition: 35.8/56.0 Wh (63.9%)
    volts: 16.0 min: 15.2 model: Samsung SDI DELL W7NKD7B status: discharging
CPU:
  Info: quad core model: Intel Core i7-8550U bits: 64 type: MT MCP
    arch: Coffee Lake rev: A cache: L1: 256 KiB L2: 1024 KiB L3: 8 MiB
  Speed (MHz): avg: 658 high: 867 min/max: 400/4000 cores: 1: 400 2: 800
    3: 400 4: 400 5: 800 6: 800 7: 867 8: 800 bogomips: 31999
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel UHD Graphics 620 vendor: Dell driver: i915 v: kernel
    arch: Gen-9.5 bus-ID: 00:02.0
  Device-2: NVIDIA GP108M [GeForce MX150] vendor: Dell driver: nvidia
    v: 550.120 arch: Maxwell bus-ID: 01:00.0
  Device-3: Realtek Integrated_Webcam_HD driver: uvcvideo type: USB
    bus-ID: 1-5:2
  Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X:
    loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa dri: iris gpu: i915
    resolution: 1920x1080~60Hz
  API: EGL v: 1.5 drivers: iris,nvidia,swrast platforms:
    active: gbm,x11,surfaceless,device inactive: wayland,device-2
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: intel mesa
    v: 24.2.8-1ubuntu1~24.04.1 glx-v: 1.4 direct-render: yes renderer: Mesa
    Intel UHD Graphics 620 (KBL GT2)
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Dell driver: snd_hda_intel
    v: kernel bus-ID: 00:1f.3
  API: ALSA v: k6.8.0-58-generic status: kernel-api
  Server-1: PipeWire v: 1.0.5 status: active
Network:
  Device-1: Intel Wireless 3165 driver: iwlwifi v: kernel bus-ID: 02:00.0
  IF: wlp2s0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
    bus-ID: 1-7:3
  Report: hciconfig ID: hci0 rfk-id: 4 state: up address: <filter> bt-v: 4.2
    lmp-v: 8
Drives:
  Local Storage: total: 238.47 GiB used: 36.5 GiB (15.3%)
  ID-1: /dev/nvme0n1 vendor: Samsung model: MZVLB256HBHQ-000H1
    size: 238.47 GiB temp: 25.9 C
Partition:
  ID-1: / size: 229.63 GiB used: 36.21 GiB (15.8%) fs: ext4 dev: /dev/dm-1
    mapped: vgmint-root
  ID-2: /boot size: 1.61 GiB used: 291.7 MiB (17.7%) fs: ext4
    dev: /dev/nvme0n1p2
  ID-3: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat
    dev: /dev/nvme0n1p1
Swap:
  ID-1: swap-1 type: partition size: 1.91 GiB used: 0 KiB (0.0%)
    dev: /dev/dm-2 mapped: vgmint-swap_1
Sensors:
  System Temperatures: cpu: 30.0 C pch: 32.5 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 16 GiB available: 15.36 GiB used: 1.82 GiB (11.9%)
  Processes: 338 Uptime: 2h 38m Init: systemd target: graphical (5)
  Packages: 1996 Compilers: gcc: 13.3.0 Shell: Bash v: 5.2.21 inxi: 3.3.34

17 *	* * *	root	cd / && run-parts --report /etc/cron.hourly
25 6	* * *	root	test -x /usr/sbin/anacron || { cd / && run-parts --report /etc/cron.daily; }
47 6	* * 7	root	test -x /usr/sbin/anacron || { cd / && run-parts --report /etc/cron.weekly; }
52 6	1 * *	root	test -x /usr/sbin/anacron || { cd / && run-parts --report /etc/cron.monthly; }

Help Request

Anyone have any ideas for tracking down what might be causing this? I was going to just wipe the machine and replace Linux Mint with MX Linux to rule that out, but I figured I'd ask here before doing that, especially because it could be the hardware and not the distro that's causing the issue.

I just used the label on a comment and to my surprise it is not visible for me, neither is it visible when I log out.
On other comments I do see the label in both situations. This makes me think there is a condition where the label is now shown or that something might be up with tildes itself.

I understand that Tildes implements rate limiting for replies to comments in order to discourage excessive back-and-forth debates or arguments. My current rate limit is one reply every 2 hours. So, if I reply to a comment on one post and then try to reply to a comment on another post, it tells me I have to wait 120 minutes (minus however many minutes since my last comment) until I can comment again.

Is this the normal rate limit? If so, don't people find this... limiting?

Update (2025-04-09 at 08:22 UTC): I was just able to comment twice within ten minutes, so it seems the rate limit has disappeared as mysteriously as it appeared.

Background:

I've been using a 9-year-old 13.3 inch Dell Latitude 7370 laptop running MX Linux to stream games via Moonlight from a beefier desktop machine. It is SO good and works flawlessly. My only complaint is the smaller screen size.

I would like to upgrade to a larger computer, and given that the computer will literally only be used for streaming games, it doesn't need to have great stats. I'm looking at used/refurbished models -- both for price and because buying something new feels like complete overkill for my needs.

My only requirements are:

• 17 inch screen
• USB-C charging

That's it! I'm assuming that literally anything I can get with that will work for what I need given that my small, decade-old laptop is already doing the same job perfectly. USB-C charging is a must-have for me. I already have USB-C power cords in all the places I plan on using it, and I don't want to have to use a separate charger for it.

My Situation:

Because I'm searching for used/refurbished models, I'm limited to what's available rather than going for any specific model of computer. I can easily find listings for computers with 17 inch screens. What I can't find easily is whether or not they support USB-C charging. Most sites don't have a filter for that, and a lot of the listings don't specify the type of charger used and just list "AC adapter" (or don't mention it at all). Many sites don't have pictures of the ports, or the pictures they do have are stock photos that aren't of the exact model.

Is there some easy way to find these that I'm missing? Some keyword, or a site that does have a filter for that, or brand knowledge that can point me in the right direction?

Also, if anyone has any recommended sites for used/refurbished laptops, let me know. I have had success with Backmarket for used tech before, but I'm open to recommendations.

I was going to get screenshots to backup what I am talking about but apparently they aren't kicking around in the system forever so most of the evidence is gone but I often see mycketforvirrad editing the title of a post I make to exactly what it already was while they are editing tags as they see fit.

What's up with that?

I was going to post a question regarding the topic logs but looking through my old posts, I see that much less than I remember have any topic logs on them.

I can't tell if I am imagining that alot more of them used to have topic logs or Deimos coded it to be a temporary record of the changes that the mods here make?

and if so, why temporary?

I'm touching up a game with a dev who is getting their code ready for a FOSS build of their game. One of the more persistent bugs is something weird in the settings menu, where an option is focused and checked off, the text label disappears. Color override doesn't seem to affect the behavior, but if I go into the game editor and uncheck Clip Content and Follow Focus, the behavior flips and now it's focused and UNchecked text labels that disappear. I'm putting feelers out for advice on the usual haunts, and I thought I would ask here too.

Godot version is 3.6, the only modification is that it uses Godotsteam.

RESOLVED
/var/lib/docker/volumes/ <-- thats where the data is saved

I fucked up colossaly
I run a Nextcloud all in one instance on my ubuntu VM with Hetzner.
I run a backup of my phone to said instance.
I forgot to set a sensible limit on my Nextcloud.
I somehow changed to hourly backups....
My Vm filled up in a very short time.
My VM has not one byte of free space left.

What I tried to do:
open Console inside the Nextcloud Aio Container with docker exec -t -i , to find the space and delete stuff, but no chance, not enough space.

There is nothing else on the VM i know of that i could delete to make space (nothing else i put)

has somebody an idea how to fix this gracefully?

I have some ideas but they involve a lot of work or money...

• just pay for a bigger VM but i dont need more cores only more space, even that i dont really need (incures a monthly cost, cannot downsize afterwards as more space means you cannot downsize)
• clone my vm onto a bigger one, delete stuff, clone it back to the original one... (sound like a lot of work, incrues (little) cost, and feels like a lot of risk involved)

I'm looking for a book I read in middle school where people are factory farmed for their parts before they hit puberty by organic mech of some sort, but the protagonist escapes and is hunted but is able to hide in an abandoned (ship?) with some others and starts to fight back? For the life of me, my search skills are failing.

I came to Tildes to get away from the endless political talk of reddit. Is there any way to unsubscribe from the political threads here? Most of them seem to be posted in ~misc, but there's other content there too.

It looks like we're getting some new sign-ups! Welcome to Tildes!

This thread is for you to ask any question you have about the site, from “what is the moderation philosophy?”to “what does that blue line next to some comments mean?” to “what is the general vibe like here?” Tildes has a lot of documentation, history, and embedded social norms that can be daunting or opaque at first glance, so here’s your opportunity to get help with anything you need.

Questions about anything and everything are fair game. Follow-up questions are encouraged! No question is too simple.

Also, a quick note: the only person who can speak in any official capacity on Tildes is our admin @Deimos. Everyone answering who is NOT him is just a helpful community member!

It is perfectly okay to ask any question — even if you think it’s been asked before, or even if you didn’t search for an answer beforehand. Just ask away, and someone will answer you!

At over 600 comments and over a month old, v1 of the questions thread is due for retirement. Here’s a new, fresh one for all the users we are continuing to get.

We have a lot of new users joining the site. Welcome to Tildes!

This thread is for you to ask any question you have about the site, from “what is the moderation philosophy?”to “what does that blue line next to some comments mean?” to “what is the general vibe like here?” Tildes has a lot of documentation, history, and embedded social norms that can be daunting or opaque at first glance, so here’s your opportunity to get help with anything you need.

Questions about anything and everything are fair game. Follow-up questions are encouraged! No question is too simple.

Also, a quick note: the only person who can speak in any official capacity on Tildes is our admin @Deimos. Everyone answering who is NOT him is just a helpful community member!

It is perfectly okay to ask any question — even if you think it’s been asked before, or even if you didn’t search for an answer beforehand. Just ask away, and someone will answer you!

I am a scientist who has semi-frequently written code in C (and other compiled languages like Fortran). When it comes time to compile, I typically tape together a Makefile from past projects and hope for the best, but even then I spend more time than I'd like to admit trying to figure out why my project is not being compiled or linked correctly. I've had a hard time finding any resources that aren't extremely surface level, or else are not behind some type of paywall. Can anyone recommend me some reading so that I can confidently write Makefiles and compile programs and actually understand what the different flags and commands are doing? I don't need extreme "under the hood" information as I don't intend to do things like write my own compiler, I just want to understand the process a little better. Help a scientist out!

SOLVED
Bit of a long shot here because this is one of those issues where I search for the problem and you get a sea of replies like "have you checked the settings?" or "have you tried changing HDMI cables".

I just got a brand new LG OLED TV and I'm happy, but I've been watching Arcane on it and I notice jarring changes in brightness through the episode.
I'm playing through a native app (Stremio) on WebOS and it's not the source file, I've tested the same file on two different monitors and it's fine.
I went through the settings and disabled every autocorrect and "boost" capability the TV has to try and diagnose it, and the first pass did seem to improve the rate of changes, but it still happens maybe once every 5 mins of watch time.
From what I can tell it seems to be picking up particular colour/brightness changes in the source (Arcane is full of then being so vivid) and when it does, it just changes the brightness of the whole display.
I'm no expert here, I'm also colour blind, so I won't categorically claim it is definitely brightness changing, it could be contract or colour, I'm not sure, but it looks like brightness because the whole picture gets darker or lighter.

I wondered if it was actually flip flopping between SDR and HDR which honestly, it might be. If it is I have no idea how to fix that, as the TV seems to have no option to enable or disable HDR on native apps.

Any advice, thoughts, things to try would be appreciated. I'm technically orientated but I don't really know much about changing picture settings to be honest, I tend to pick the most basic/neutral setting and leave it like that.

Edit: I've dug out the old 4k firestick as suggested and don't get the flickering at all through that. Also running through the guide below helped make the picture look even better! Thanks everyone!
I might yet grab the service remote though and see if I can make the native apps work, then I can retire the firestick for good.

Picture explanation:

https://i.horizon.pics/tWovRax4kh.jpg

When I view my subscriptions page on YouTube, half the "videos" are recordings of completed streams, often 2+ hours in length. I'm not interested in watching these. For me, they're just pollution in the feed.

Apparently, a lot of the channels I subscribe to, whose videos I enjoy watching, also stream on YouTube a lot.

Second Wind is probably the channel I'm most hung up about. I like their normal videos, and don't want to unsubscribe from their channel, but jesus they stream two or three times a day.

(Also, it's annoying that when I view a YouTube channel, I can visit their videos page or their streams page separately. Why can't I have this same separation on my own subscriptions page?)

(Also also, I already use an extension to hide shorts (among other things), but it unfortunately does not have a feature for hiding streams.)

Fancy bullet point summary:

• I want to hide recorded streams from my subscriptions page
  • I don't care as much about hiding active livestreams, because those don't pollute my subscriptions page nearly as much
• I do not want to unsubscribe from any of the channels I follow. That is not an option
• I'm willing to stop using youtube.com in favor of an alternative client (web, desktop, etc) if that client supports hiding recorded streams from actual videos
• I'm willing to install a browser extension that can solve this problem (but I can't find one for Firefox)

Ninja edit:

While writing up this topic, I actually found my own solution. The browser extension I mentioned earlier has an "advanced blocking" feature that takes a JavaScript function as input. The extension's GitHub page has an issue, with a comment, with some code to hide streamed videos on the subscriptions page.

However, that code didn't work when I tried it. Thankfully, I just needed to check for videoRenderer instead of gridVideoRenderer.

Here's the updated code:

(video, objectType) => {
    // Only videos on the Subscription page
    if ( objectType === "videoRenderer" ) {
        if ( video.hasOwnProperty("badges") && video.badges.includes("live") ) {
	    return true;
        }
        if ( video.hasOwnProperty("publishTimeText") && video.publishTimeText.indexOf("Streamed") != -1 ) {
            return true;
        }
    }
    return false;
}

I have no idea what the consequences of checking against videoRenderer instead of gridVideoRenderer might be, and right now I'm too lazy to find out. This works well enough for now.

(The "consequence" might be that streams are hidden from the related/recommended videos in the sidebar of a video page? I actually hide that sidebar, so I wouldn't know. Oh, and they'll probably be hidden from a channel's streams feed.)

It isn't a perfect solution though. Streams that are "scheduled" still show up on the subscriptions page. However, I think channels can set streams and videos as scheduled? So blocking one without the other would be more complicated?

I welcome any feedback or improvements on the code.

I would like to see if I can filter out Twitter posts (and comments) from my feed on Tildes. I personally don't want to further engage anymore with the site and I've blocked the URL using ublock so would be good if I can pre-emptively filter the site. There's not a huge traffic but I'll do what I can.

I got this error message this morning when making content ( replying to a thread ) first thing in my Tildes.net session

https://paste.pics/SN1N0

Oddly, I didn't have any trouble making a new thread ( this one ), just replying to existing threads.

It happened on only the second comment I tried to make this morning.

Good evening, everyone. I was wondering if any of my fellow Tilders had experience with using Android's Private DNS feature on unconventional android devices e.g. WearOS, Android TVs etc.

It was quite easy to figure out exactly how to set up an alternative DNS server on these devices. By default, Google has hidden the private DNS setting on them, but it is still accessible from ADB. In both of my examples it is likely easiest to enable “Wireless Debugging”, pair the devices successfully, and then run the commands.

settings put global private_dns_specifier one.one.one.one (replace this with the pertinent server!!)
settings put global private_dns_mode hostname

The issue I have been running into, however, is if there is seemingly any form of content filtering enabled on the DNS server of your choice, the WearOS device seems to think internet is unavailable when first connecting. If you open the Settings app and leave it open for long enough on the Wi-Fi page, it will switch from “Internet not available” to “Connected”. Contrary to this, if you open an app like Samsung Internet for, it does not take this time and just refuses to use any configured Wi-Fi network.

To go into my specific situation in a little more detail, I use NextDNS configured with Hagezi Multi PRO++ block list. I have no issues on my S24+ with regard to internet being deemed unavailable by the OS (sure the occasional public Wi-Fi network blocks DoT—I just use mobile data then). I have also yet to try it on my Smart TV, which is frankly the more important target device than my watch (I will get around to it in the new year once the holidays are over).

This is all a potentially very convoluted way to ask what people's experiences are with this, and if they have faced similar problems to me when using providers like NextDNS, AdGuard etc. that provide content filtering options on their encrypted DNS connections.

Merci beaucoup !

The lecturer was Sarah C. M. Paine (works at the US Naval War College)
I believe the lecture host was The Heritage Foundation.
The lecture was focused on national strategies and motivations.
It touched on the differences between nations she described as maritime powers vs. geographic powers.
The part I'm most interested in watching again was her explanation of the compounding effects of economic sanctions over years/decades.

I believe this interview with Dwarkesh Patel touches on a lot of similar material

However I am 99% certain she delivered a very similar talk to The Heritage Foundation and the person I want to watch the video puts a lot more intellectual value into The Heritage Foundation than they do Dwarkesh Patel...

I'm also pretty sure I saved the heritage foundation video in one of my youtube playlists, but ... it's gone without a trace, and I'm finding no mention of it on The Heritage Foundation website now either.

Thanks and please let me know if I should post this under a more suitable topic.

I recently upgraded to a pixel 9 pro and noticed that the higher resolution resulted in text that was often too small.

I went to my settings and increased my font size to 125%. However, I noticed that this doesn't seem to apply to titles on Tildes, at least not in a uniform way.

It's hard to say without going back to my old phone, which I can't easily do right now, but I do think I recall title font size varying depending on the length of the title. But perhaps the difference wasn't as drastic on my old phone due to the difference in resolution? Perhaps the titles with smaller font sizes were still easy to see so I didn't really notice? It's just very noticable on this phone. I don't want to increase zoom on Chrome for every website just to solve this issue.

Ideas?

Alright, time to ask for help. I designed a website for my cousin using Wordpress, hosted via BlueHost. It's 99% done.

The problem: she'd originally registered her domain through wordpress.com. She also has an email through that, which she accesses via Google Workplace. We've transferred the domain, but the nameservers are still registered to wordpress.com. I've found the guides for transferring nameservers on BlueHost and wordpress.com, but this is a step above what I've dealt with in the past.

My main concern and frustration are the email. She's already using it for work, and I want to make sure there's no downtime, but I... honestly have no idea how it's even set up, right now. Or how this would work when transferring hosts entirely. Attempts to search it haven't been too helpful for me.

So my questions: How will changing nameservers impact the email? Would updating them potentially just... break her email entirely? Need her to set up the email separately? And if she does, can it be kept through Google Workplace/Gmail since that's what she's already using? Is it fine to leave it as-is? I assume not but her wordpress.com account shows that it expires in 2027, so...?

Just, please help.

hello tildes,

i am searching for a bare-bones forum/message board. i'll describe what i need and perhaps someone can point me in the right direction:

must have the ability to

• create an account
• create topics with the ability to reply
• fully customizable front-end (html/css) so i can make it match my website
• either self-host or use a custom domain on ext hosting

unimportant but nice to have

• display images in posts via external urls
• different boards (categories?) to post into (would be nice but not vital)
• nested replies (or some visual way to see what you're replying to)

free would be ideal (dreams are nice) but probably wouldn't want to spend more than $5/month as this is a supplement to a website where i don't expect much traffic at all due to the nature of the project. no images/video/audio will be hosted ideally.

i'm ok with "hacker news" or "reddit-like" software but my backend knowledge if very limited. for instance, i looked into self-hosting lemmy but i don't understand how to setup docker. options like phpbb would be fine if i could strip away everything aside from the above-mentioned features.

i want it to be extremely simplistic in appearance and for the end-user (tildes is a great example of the simplistic end-user experience). tildes could be a cool option but i think getting it setup is a bit out of my skill-range.

can anyone offer any suggestions/guidence?

edited to emphasize important aspects and clarify things that are not vital but would be nice to have.

I have an M1 MacBook Air. I use UTM to run a Debian 11 virtual machine.

After the initial setup, updating and upgrading, installing Firefox and a few small programs, (I almost called them apps, d'oh), the Debian.utm file size was about 6GB. Now, less than a month later, it's almost 9GB.

The VM size increases after each use. I haven't downloaded or installed anything close to 3GB worth. I have downloaded files, then put them into the trash and emptied the trash, could the trash not be emptying properly?

I have run ncdu, but nothing stands out. When I drill down into /usr and into each large folder, no sub folder is larger than a few 100MB. I can't see any big files lurking.

I've googled using many search terms, but I can't get past results that are about how to increase the size of a VM that is running out of room.

Thanks very much for reading this, any ideas?

Hey all, not-a-networks-guy here.

I've currently got an rpi set up running pihole natively (not in a container) for ad and website blocking reasons. (Using port 80, no TLS) I've used the pihole localdns feature to set an internal hostname for that ip (me.lan).

On the same pi, I have podman "set up" to run FreshRSS, and I'm getting more and more annoyed about using the port # to access it. (me.lan:12345) I'd like to set up a reverse proxy (probably Traefik) in a container to redirect internally, but considering that port 80 is taken (by pihole, outside of podman) I don't see a way to direct traffic from the pihole to Traefik.

I'd really rather not reconfigure the whole setup to use containers.... I'm lazy, and also prefer my dns resolver to have the least amount of overhead possible. Is configuring the router an option here, or is the only way to achieve what I'm looking for an overhaul of the pi and containers?

If I've missed any pertinent details, let me know and I'll update here.

Hi everyone, I recently finally setup the Ruckus AP unleased system that came with my townhome. After spending a long night learning how to properly configure the system I finally set it up in a way that provided me the best speeds/range without interference.

This was achieved by setting my Ruckus APs to manually sit on the DFS channels (60-140) via the Ruckus configuration app (shown here)

This has been working great as I'm avoiding the 10~ other wifi networks in the area that are all set to the standard 36-48 and 149-160 channels (wifi analyzer screenshot here) but I'm concerned I may be inadvertently violating FCC guidelines. Note I do not live near any military installations, but I am about 13 miles away from a major airport. Will the Ruckus APs automatically change channels if they detect radar interference or am I causing trouble for someone?

So last year, the day after National Cinema Day, I saw this Tildes thread:
https://tildes.net/~movies/19s7/today_is_us_national_cinema_day_what_are_you_going_to_go_see_for_4

Apparently I missed out on the year's biggest discount day... No biggie, I'd go next year!

My phone's calendar said it would be on August 25th 2024, so I set a reminder. I check this morning, and see... normal priced movies?

I look it up, and I see Regal's website hasn't been updated since 2023, 99% of news articles are still about 2023, and the articles about 2024 say either September or October dates. The subreddit for cinema employees as recently as 11 days ago had no clue when it would be.

Does anyone on Tildes know what's going on?

I remember seeing a fun website somewhere which was basically an isometric animation of a space station or something like that. It had a lot of tiles with a lot of fun stuff happening on it, it kinda had a "Where's Waldo" vibe. I think it had a number in it's name, like station42 or something like that. I can't find the website now. Does anyone remember what it is?

I recently moved to a new place with a new ISP, and my Mullvad VPN isn't playing nicely with Firefox like it used to. Can any of you networking gurus please help me troubleshoot?

When the VPN is enabled, most requests from the browser fail immediately. If I pull up the dev tools Network tab, I can see that these requests fail with an NS_ERROR_FAILURE message before any data is transferred.

I have Firefox configured to use "strict" Enhanced Tracking Protection. When I reduce it to "standard" my requests go through.

I'm also trying to use DNS over HTTPS with a custom provider (Mullvad, via https://dns.mullvad.net/dns-query). I'm configuring this in Firefox, using the "Increased Protection" DoH setting. When I do that, Firefox reports the DoH status as "Status: Not active (NS_ERROR_FAILURE)". This happens even when Enhanced Tracking Protection is set to "standard" — in other words, that reduced setting fixed the NS_ERROR_FAILURE for HTTP requests, but not for DoH.

So how do I fix this so Strict Enhanced Tracking Protection, DNS over HTTPS, and Mullvad all work together? I never had this problem with my old ISP, so I suspect something's being blocked at the WAN level that I need to circumvent.

• OS: macOS Sonoma 14.5
• VPN protocol: WireGuard
• ISP: AT&T Fiber

I'm just using the official Mullvad client app with mostly default settings. The fiber gateway modem/router came with some default packet filtering firewall rules but I disabled everything in the admin panel. Weirdly, rebooting my machine fixed this temporarily, but the next time I disconnected/reconnected the VPN it broke again. Other browsers (with default settings and no DoH) are working fine when the VPN is connected.

Edit: Solved! Solution here.

My apologies if this kind of content is not allowed here. Mod(s) please feel free to delete it if it is not without any butthurt on my part.

I'm new to React Testing, so I am taking an Udemy course on it. The Udemy course uses yarn, so I would like to stick with that though I do know yarn isn't the top accepted tool in the React community.

I've posted this question elsewhere, I haven't gotten any responses, so I am posting it here ( costs nothing ).

I am getting this error when executing yarn build:

$ yarn build
yarn run v1.22.22
$ react-scripts build
Creating an optimized production build...
Failed to compile.

TS2305: Module '"web-vitals"' has no exported member 'ReportHandler'.
  > 1 | import { ReportHandler } from 'web-vitals';
      |          ^^^^^^^^^^^^^
    2 |
    3 | const reportWebVitals = (onPerfEntry?: ReportHandler) => {   
    4 |   if (onPerfEntry && onPerfEntry instanceof Function) {      


error Command failed with exit code 1.

I've tried installing web-vitals over what is already in the modules section, but that hasn't helped.

Any clues appreciated!

Update: the tip about ReportHandler being deprecated helped. I ran create react app in a new folder, did NOT run yarn update as the instructor called for,moved my work over, and now everything runs fine.

trying to settle on a program where I can jot down stuff and have some degree of confidence that it will persist and I can't seem to find any actual documentation from vs code as to:

1. How often unsaved files are saved so that they can be restored when a session is reopened
2. if that frequency of how often they are saved can be configured?

Sidenote: I was going to ask this question on SO but apparently I am at risk of a question ban for not asking "good quality questions". Half my questions on there are from when I was a fresh developer and didn't really know how to articulate my questions well. Really changes my opinion of the openness of SO......

Apologies if this isn't an appropriate place to post this.

Inspired by a paper I found a while back (https://publications.lib.chalmers.se/records/fulltext/215545/local_215545.pdf), I tried my hand at implementing a program (in C#) to create ASCII art from an image. It works pretty well, but like they observed in the paper, it's pretty slow to compare every tile to 90-some glyphs. In the paper, they make a decision tree to replicate this process at a faster speed.

Recently, I revisited this. I thought I'd try making a neural net, since I found the idea interesting. I've watched some videos on neural nets, and refreshed myself on my linear algebra, and I think I've gotten pretty close. That said, I feel like there's something I'm missing (especially given the fact that the loss isn't really decreasing). I think my problem is specifically during backpropagation.

Here is a link to the TrainAsync method in GitHub: https://github.com/bendstein/ImageToASCII/blob/1c2e2260f5d4cfb45443fac8737566141f5eff6e/LibI2A/Converter/NNConverter.cs#L164C59-L164C69. The forward and backward propagation methods are below it.

If anyone can give me any feedback or advice on what I might be missing, I'd really appreciate it.

Today is my last day at work and my boss wants me to BCC anyone I have ever sent an email to announce my departure.

I have tried exporting all my sent messages and trimming the list by advanced sorting out the duplicate email addresses in excel, but messages with multiple recipients are plentiful and need to have the emails separated into individual cells at the very least.

I also tried the .NK2 file route. I downloaded the MFCMAPI program to find my hidden autofill contact file, but it can only be exported as an .xml or .msg file and I don't know how to handle those files properly to get the data I need.

Does anyone here have a solution to automatically add every autofill contact on Outlook as BCC recipients for a final email?

EDIT: I found a solution that worked for both of us. I emailed the clients I remember as the most important and set up an automated reply to handle those I forgot to message.

I will soon have a home and figured now's the time to do a proper home server, especially since it's going to come with cat 6 run from the main panel to just about every room. I code for a living, but at the same time network is a massive gap in my knowledge, as are servers, and I was hoping to use this as a learning moment as well as just a way to optimize things. I've been doing research for a few weeks now on and off and feel like I've got more questions than I started with, so I'll just vomit them out and if anyone has some guidance I'd really appreciate it.

Some information:

1. I'm willing/able to spend to get quality/simplicity. Time is the much bigger crunch for me right now, and I'd much rather buy something that works even if it costs more than cobbling together some deals.

2. Related to 1, I'd like this to not become my fulltime second job/hobby. I will at some point try to expand to a full home lab, and do want to use this to learn about things I feel I should understand better for general knowledge and my career, but i'd love for core functionality to mostly "just work" after configuring so when I don't have time to do that I'm not stuck telling everyone "oh yeah it'll be broken until I find time to fix it".

Things I know I want-

1. Some sort of NAS. From my research Synology comes up a lot as the "it's expensive but it'll just work" option, and I probably want something like a 4 bay of NAS specific several TB HDD's in something like raid 5/6/10. Pricey as hell but I'm most willing to spend on this as the cost might very well be split by the family members who want me to guinea pig all this.

2. I will have a camera system and would prefer to not have it sending data outside my network. This is the area i've looked at the least, as it's a little farther down the road, but I know others who have things like Arlo and lets just say i'm not super impressed. Obviously this brings up question like remote access to said camera's and where I'm storing the data (nas? Somewhere else?)

3. I'd like to mess with a media server. Plex/Jellyfin constantly come up in my research, so I'll be looking into those, but I've also got a bunch of audiobooks that I'd love to be able to easily share, and I think there's software for that stuff as well.

4. Pihole strikes me as the other "well if you're going to do this, you might as well" option that i'm aware of. Realllly need to better understand networking in general, but I hear these days it can kinda be installed and quickly configured and then left to do its job.

5. Related to all of this, Casa OS keeps coming up as a very good tool for a beginner like me, since it streamlines the handling of docker containers and also file sharing. However it's not really an OS, since it must actually run on Debian (i think?) for now (zima OS still in testing?).

Stuff I'd like to mess with but doesn't have to happen right away.

1. Eventually the aforementioned NAS would be backed up offsite to another NAS at another family members house, once I know what the hell I'm doing.

2. Proxmox constantly comes up as THE tool to use, but it leaves a lot of questions for me. Obviously if I start trying to do lab environments and screw with VM's it's going to be great, but my understanding is that I probably don't, as a beginner, want to say load up a device with proxmox and then have it host debian which installs CasaOS as it'll get a little more tricky to have everything talk right? Unsure on this part.

3. Anything else I'm forgetting. One issue I keep having with this is a LOT of the information out there is either too complex for me to really grok or just says "well yeah you could do ANYTHING with this" and it just sorta assumes I know what the options are. If there's anything else worth checking out I'd love to know.

Hardware I've come across-

1. Synology - Already mentioned but seems like they're a common go to for a "more money than skill/time" situation like mine.

2. Zimaboard - My understanding is it's underpowered for its price, but the main draws are that it's VERY low power, small, and quiet. What it could actually do from my list above is where i'm unsure. I see people are supposedly using it for Plex servers and what not, and I'm pretty sure it's not going to make any kick ass lab environments, but being quiet, small, and maybe a bit closer to plug and play seems tempting (I know they make the blade and a few other products but it all seems greek to me).

3. Various mini computers - I've got a minisforum machine from several years ago that I currently use as a living room computer for light gaming and mostly playing movies and the like. Not sure if i could just wipe it and convert it to be the starting point (more on that later). I know used 1 liter mini pc's from companies like HP are also popular.

4. The MS-01 - Similar pile as the last one but my understanding is this is the kind of thing that's probably really cool if you actually know what the hell you're doing. I'm 99% positive it is vast overkill for my purposes, but I'd like to eventually get to the point where I could understand why I might want something like this. My understanding is if I knew what I was doing I could probably drop proxmox on this and do everything I could ever want and more, but I feel quite far from that.

Some general questions I have -

1. The thing that kicked this all off is my new place likely having fiber, and cat 6 drops throughout the building. Architecture is something I'm still a little shaky on. I assume i'm going to need my own modem/router (just because the cox routers are meh and not really configurable from last I checked), and then that routes to the server first???...or something(seems like a must if you want the pihole to do anything)? I've seen lots of niffty network diagrams at this point but they're all from people WAAAAAAAAY beyond my skill level doing much more ambitious stuff, so it gets hard to understand. If anyone has a simple home network diagram/guide to look at I'd really appreciate it.

2. I'm just in general going to need to learn more about networking, especially in a home environment. Should I eventually get those camera's set up, I want to understand how to let them talk to internal storage and what not ,but not get out to the web...or..something (again remote access seems nice, but also like a massive security concern). I know speed is also a big factor i'm going to need to better understand. Having a fiber connection in only to be bottle necked by a crappy router or a 1gigabit port is just a waste of money, so that's something else I'd like to better understand.

3. I'm a little unclear on how to deliver the media in a media server to the various screens throughout the building. I've got cat 6 to all of them, but I suspect i'm still going to need, at the very least, a cheap computer to hook up to it and then display the image to the monitor/TV? This is why I assume I can't just wipe my current mini PC and reuse it as a server, because I still need it to receive the data from the home server (or at least a web browser?). A part of me feels like if I got a powerful enough server it should be able to server the media direction to the screen, but then you'd need some sort of HDMI/DP drops as well from the server to all your screens?...or something?

Sorry for all the rambling but I've got an odd mix of knowledge and ignorance so it's been a little difficult to research when half the video is stuff I already get, and the other half blows past me or just assumes I know about the parts i'm trying desperately to learn about.

I have managed to install and configure something called NextDNS on both of my devices and most browsers, even though the documentation seems to be made with more tech-savvy people in mind. So far so good. I turned on all the available blocklists, but a lot of strange looking (to me) traffic is still getting through. I'm assuming some of it is benign, but how do I evaluate which addresses I should block or not? I'll list some examples below.

init.ess.apple.com
init-p01md.apple.com
bag.itunes.apple.com
gsp-ssl.ls.apple.com
gspe35-ssl.ls.apple.com
pki-goog.l.google.com
For these, the service offers the following information: 'Provides advertising or advertising-related services such as data collection, behavioral analysis or retargeting.' Sounds like something I wouldn't want to enable. When it comes to the iTunes one, I don't use iTunes and don't even have it installed (don't ask how I managed to get rid of it - it took several days worth of trial and error..). One of these, pki-goog.l.google.com is listed as 'dangerously prevalent (tracks 21.23% of web traffic)'.

Then again, the same general description is sometimes given to addresses that seem legit, such as:
time.apple.com
weather-data.apple.com

Some are indecipherable to me and don't come with any sort of description:
fp2e7a.wpc.phicdn.net
init.ess.g.aaplimg.com
get-bx.g.aaplimg.com
ocsp2.g.aaplimg.com
ocsp.pki.goog

Some descriptions are kind of vague:
a2047.dscapi9.akamai.net
apis.apple.map.fastly.net
'Content delivery network that delivers resources for different site utilities and usually for many different customers.'

Some seem to be doing tasks that are definitely wanted:
ocsp.digicert.com
'Digicert Trust Seal - Includes tag managers, privacy notices, and technologies that are critical to the functionality of a website.'

Then there's an Amazon Web Service, go-updater-1830831421.us-west-2.elb.amazonaws.com, listed as very prevalent (tracks 5.5% of web traffic) that has been contacting my phone even though I haven't done any shopping or product related searches. What is this and should I block it?

And so on and so on. Is there any logic to these that I can follow? I tried google searching some to no avail.

I'm not talking about the unsubscribe button that is at the bottom of an email that takes you to the sender's website to unsubscribe. I'm talking about the button that occasionally shows up in outlook or apple mail that is delivered by the application.

I have clicked unsubscribe using the built in unsubscribe button in outlook and apple mail, only to receive more junk mail from that origin later that day. These buttons don't seem to do anything. What are they doing behind the scenes that is supposed to be getting you off mailing lists?

I have a project where I interview people on my twitch live, as if it were a talk show. I mainly focus on people in the gaming world, so if you would like to be interviewed about your hobby for 30-40 minutes let me know!

I interviewed speedrunners, gaming musicians, challenge runners, and tournament hosters before, but I'm open to anyone that is interested and in the gaming sphere. I don't have many viewers or influence it's simply because I love to do it. If you would like to collaborate on something like this, let me know! Thanks!