Weird question, but does anyone know of a simple tab viewer or organizer for Firefox (bonus points if it works on iOS)? I have... way too many tabs open, and I want to see what I can bookmark before closing rather than having to either close everything or manually check each tab.

Internet in my fiancee's house is weird. Once I open up a domain, going to links in the same domain is quite fast, but if I try opening another domain in another tab it is super slow. On Chrome it is really bad, Firefox is better but still sluggish. This occurs similarly on different devices running Windows, Linux, and Android. What could be causing this?

A few years ago I decided to ditch Gmail and started using Disroot as my e-mail provider. It was recommended by privacytools.io.

I realized that at least one e-mail I sent went to spam and now every time I send an e-mail I get paranoid if it will reach its destination. Is there a way to know if the e-mails I send are opened?

I've thought about switching to a more mainstream e-mail provider like ProtonMail but I already have so many accounts linked to Disroot that make switching dreadful. As a matter of fact I still have over 100 accounts that are using my Gmail address because it's so time intensive and not a priority to do the switch. Hopefully in the password-less future this kind of problem will cease to exist.

I have a CalDigit TS3+ dock that I switch between my M1 Macbook Pro and a System76 Galago Pro that's currently running Windows 10 (I'm sorry, FOSS gods). The M1 has no problem using the TS3+ when it's connected or disconnected and reconnected. But the Galago Pro will only connect to the dock if it was connected while booting up. Disconnecting and reconnecting leaves the dock in a state where only the pass-through thunderbolt port works. So my monitor that uses the pass-through for DisplayPort can operate after reconnecting the dock, but no other devices plugged into the dock will. My mouse/keyboard for example don't even receive power in this state.

Oddly when setting up the drivers for thunderbolt I found that the only drivers available are for Intel's NUCs. IIRC someone on reddit said that this is actually the software I need to install, so that's what I did.

Any help getting the dock to work better is appreciated! Currently I need to reboot the laptop every time I switch back from the M1 to the Galago Pro.

Clicking a tag provides the search results for that tag in the local group. Since some topics appear across groups, I think it'd be useful to view site-wide results as well, optionally. Does that already exist?

EDIT: Crisis averted! The problem was with the modem and not the devices connecting to it. I'm not sure why the first person I called at the ISP couldn't help me. In reality, the second person I called also didn't help, but something magically started working after talking with them a second time and rebooting the modem about 5 more times, so it turns out I don't need a new WiFi router at this time. That said, I will take these suggestions to heart, as I may be buying one anyway as a backup for when this inevitably happens again.

TL;DR: I probably need a new wifi router and want one that isn't malware and will work even if the company I bought it from goes under or stops making it.

Long version:
So today my wifi stopped working. I use an Apple Airport Extreme (the tower one that has a Time Machine backup in it). I've had it for 5 or 10 years and it's worked fine during that time, other than replacing the hard drive it backs up to. My spouse and I were sitting on the couch after lunch surfing the web on our phones, when we suddenly couldn't reach anything. The router itself appears fine. We can connect to it and see other devices that are connected to it, but for some reason, it's no longer communicating with the cable modem via the WAN port. It still backs up the computers in our house, though. I have tested the cable that was connecting it to the cable modem, and it appears fine. I can connect my computer directly to the cable modem without issue using the same cable. So my guess is that the WAN port is hosed.

However, I'm suspicious that something else is going on for 2 reasons. #1, the cable company (Spectrum) made me replace my cable modem last week. I did that, got my Airport connected to it, and after a call to tech support got it up and running. It's been working for the past week. I suspect the modem may have updated or changed configuration without me knowing it and that's the real cause here. They sent me a Wifi router with the modem, but will charge me $5.00/month if I keep it. I'd rather own the hardware. #2, I have an older Airport Express that was working the last time I used it. I replaced it with the newer model about 5 years ago so I could do backups. It fails to work in the same way. It seems like the WAN port isn't communicating with the cable modem. So, if there's some way to verify that the WAN ports on my Airports are or aren't working, I'd be interested to hear about it.

I am able to connect a wired ethernet switch to the cable modem and all devices on the switch can see the Internet just fine. I tried connecting both Airports to the switch via their WAN ports while the switch was connected to the cable modem, but that did not work. (Or at least, I couldn't connect to the internet via either Airport.)

So, on the off-chance that both my Airports have a similar failure, I need to replace them. I have gotten suggestions from others, but have been pretty unhappy with them. I have the following requirements:

• Absolutely must not store any information about me in the cloud (for example as Ubiquiti apparently does)
• Absolutely must not rely on any sort of connection to the manufacturer to work properly and must not phone home without my permission
• Preferably not a poorly made device that will die in 3 years
• Must work properly and at full speed with Apple devices
• Must not require a phone app to configure
• Must have ~3 ethernet ports so I can hardwire in my TV devices (AppleTV, TiVo, etc.)

Things I don't need, but aren't a deal-breaker if it has it:

• The ability to configure every little setting. I prefer to set it and forget it.
• Mesh networking. My house is not huge, the cable modem is in the middle of the house and my single Airport base station has good coverage of the entire house.

If you know of any device like this, please share!

Perhaps the post was posted in the wrong place and can be moved or deleted. But it's not entirely clear.

There is a page: https://tildes.net/groups

Where is it written:

Group name colors: subscribed / not subscribed. You can change your subscription status to a group in its sidebar when you are viewing it directly.

I decided to experiment and unsubscribe from some groups. However, there are no changes on this page. Perhaps it’s just me or I’m doing something wrong.

It is late... and I am pretty much finished with migrating to a new VPS provider. I got rate limited with two domains, but I'm running everything through Cloudflare. Do I need to bother with LetsEncrypt on the VPS itself? When I check the domains, the certs from CF are working nicely.

This is my first time using CF.

Quick edit while I pretend I can sleep.

I’m thinking that CF will cover me for 443 and route all traffic there. I’ve got wildcards set for domains with services that require other ports — which is working. All CF is doing is caching my sites, right?

I use Reddit more than I should. I flip to the 'Popular' page to see current events. I am curious if I am looking at skewed results based on the subreddits and posts that I visit, or if I am truly looking at a good sample of Reddit's popular posts?

@ admin: Sorry if it's not allowed to post these kinds of things, feel free to remove it.

I'm normally not someone who would post this kind of stuff to places like this or other sites, as it's probably kind of annoying, but l'm honestly starting to get super worried.

A close friend recently broke her leg & thanks to the fucked up US healthcare system she's got a $1800 bill due on the 11th of October. I set up a fundraiser to try and help, which raised $500 so far, but that's just not enough.
I'm really worried for her (mental) wellbeing & l am desperately trying to scrape together what l can to help. l think if the bill isn't paid, it wouldn't take long for her to end up homeless, or worse.

l don't like asking this, but would anyone be able to either donate or share the tweet? Any amount helps.

l would genuinely appreciate it a lot if you could, and l understand if you can't.

https://twitter.com/asoftbird/status/1294762351242235904?s=21

Edit: it's in the tweet, but l should mention she's trans and disabled; becoming homeless already is pretty bad, but given the other circumstances l'm honestly not sure if she'll survive that.
I have donated her $600 already which is as much as l can miss, l don't know what to do about the bit that's still missing.

You could look up, say, CMSes, get some basic info about each one (to make useful decision), and learn who its active committers were. The site closed, I know. Do you remember its name? Or people who were part of it?

I asked someone to write an article for me about "review sites for open source" -- think Yelp for Software -- and neither of us can remember its name. But if you have others that you think should be included (for positive or negative reasons), please let me know.

Here's a fresh new thread for book recommendations! The last thread from a year ago got bumped and saw some new top-level activity but few votes or responses on the new requests. I think it's probably not visible in a lot of people's feeds due to its age, and I was planning on rebooting it anyway, so here's a fresh topic we can use for new recommendations that will be visible to all.

Top level comments should fill in the blank with some sort of descriptor identifying a kind of book you would like suggestions for.

Replies can then recommend books to that individual.

Examples of what top level posts might be are below. Get as generic, specific, abstract, or out there as you want!

• Recommend me a book that will make me cry.
• Recommend me a book with a great twist.
• Recommend me a book that deals with loss.
• Recommend me a book about the fall of the Roman Empire.
• Recommend me a book with a main character in her 80s.
• Recommend me a book to help me learn PHP.

Thread reading tip: use the "collapse replies" button to see only top-level requests.

I've been playing Destiny 2 and I have so many questions. I thought about reaching out to people who actually know what they are doing. Since I'm moving away from Reddit and other sites like that I thought about creating a D2 group here on Tildes. However, If it requires "work" as a moderator or something like that I would honestly pass.

So my questions are: can anyone create a group? As a creator do you have to do any "work" on that group?

Thanks

For context: my mother said that my father has used these decongestants regularly for as long as she has known him. He passed this habit onto me when I was young, originally with Afrin, then Narix. Given there is a recommendation to not use these decongestants for extensive periods of time and apparently a rebound effect and syndrome called rhinitis medicamentosa comes from ditching it's use after said long periods, my mother decided using it like this is unhealthy and thus cut my use of it for the day, and given this stuff is cited in Wikipedia and a fair number of news/medical articles, it seems legitimate, and thus I agreed.

After that, my skin is more prone to goosebumps and being overly sensitive, my eyes are watering more, my throat feels more scratchy (although I already woke up with that, before my mother made this decision) my nose is running way more than it used to.
Can I blame withdrawal on this?
What happened to me?
How long does this last?

And is this site really where I should turn to to try to find out?

Some replies are directly going to previously read section. It happened couple of times now, I didn't get notification for these two replies, I thought may be I had my browser running in the background. But it happened again for these, replies. I did get notifications for the replies posted in between the mentioned replies.

I browse tildes mostly on mobile using Hermit. One can get notifications on your mobile from hermit lite apps by adding a url and a css selector, I used tildes.net/notifications/unread as the url and [div.logged-in-user-info:nth-child(4)] as the css selector. I did get notification (on my mobile) for couple of times but most of the time I didn't so I deleted the web monitor. It should be noted that I didn't know what I was doing. So how do I fix this? :(

EDIT: This is now solved thanks to @Amarok! Solution is here. Changing the refresh rate from 60 Hz to 120 Hz fixed it.

My husband and I recently upgraded our TV to a Samsung Q70, and I have started experiencing an odd issue, visible in this video here.

The Issue

There's a horizontal section across the entire bottom of the screen that seems to be refreshing later than the rest of the TV. The game is running on a PC hooked up to the TV via HDMI, and the TV is running on game mode. This issue did not happen on our last TV (a 10-year-old Visio that I don't remember the model number of).

The Oddness

• It doesn't happen on the desktop or in video inputs.

We've been watching YouTube and Hulu through a Shield TV that we also have hooked up, and this issue isn't present in any of those, nor is it visible when I'm using desktop applications on the TV through the PC.

• It only happens in certain games.

The video is from Trackmania 2: Lagoon, where it is always present. Meanwhile, it is not present at all in Trackmania (2020). Likewise, I've been playing 428 Shibuya Scramble where it shows up in the exact same way in the exact same area, but it does not exist in Distance or Rogue Legacy, for example.

• It does not respond to v-sync.

I've tried toggling v-sync on and off, both through the game itself and forcing it through my video card. Neither alleviated the issue. The display looked the same whether or not v-sync was turned on or off.

I'm looking for any guidance anyone can give me, especially if this is a hardware issue with the TV itself, since I'm still in the return window.

In the DC canon, The Mobius Chair is a time-space/dimensional vehicle operated by the New God Metron. It allows him to travel and observe the universe, but the one I'm making is nowhere near as functional.

I've come into a recliner chair with a cupholder on each armrest, and I already had a split keyboard. My plan is to use the cupholders as a mount for both ends of the split keyboard, so that I could use the entire run of armrest and have my hands lay naturally on the keys. Goals are to minimize weird stretching and be able to comfortably type for long stretches of time, to put off stuff building this that I planned to work on this weekend, and to look super boss, though not necessarily in that order.

If I want ultimate angulation and the best range of motion, I was thinking about something like a cupholder with a phone or a tablet mount, like this one, but if anyone has recommendations for what would be best to work with, or have done something like this before, I'm all ears.

Why is it that there is ~tildes and ~tildes.official? Why not just ~tildes and ~announcements? Why not just ~health and ~coronavirus? Why not just ~games and ~game_design?

I understand the appeal of hierarchical tags. However, if posts in subgroups don't collect into their parent groups, then why even have them at all?

https://tildes.net/~tildes/pia/can_someone_explain_subgroups_to_me#comment-55ml

Hello everyone. I consider myself fairly competent when it comes to my work with LaTeX, but as everyone who uses it knows, it is definetely strange sometimes. And right now I have a problem which just irks me in the wrong ways:

I use XeTeX and a number of custom fonts for my documents, but when writing mathematical formulas I found out that the font I set for Greek letters (Gentium Plus) is used for letter commands like \alpha, \Alpha, ... but not for commands like \sum, \prod. As you can see in this example here. You can see XeTeX defaults to Computer Modern.

I've looked all over the net for solutions but I can't find one. I'm using mathspec, amsmath, amsfonts, amssymb as my font related packages and I set my fonts like this:

\setmainfont{Charis SIL}
\setsansfont{Helvetica Now Display}
\setmonofont[Scale=MatchLowercase]{Fira Code Retina}
\setmathfont(Digits,Latin){Charis SIL}
\setmathfont(Greek){Gentium Plus}

I feel like I'm going insane not solving this problem. Should you require it, my entire LaTeX template is here on Github. Please help, thank you.

I moved into a new apartment and was surprised to see that all my rooms have CAT 5 Ethernet ports in the wall. However, cue my disappoint when I try to naively plug my router and machine in two separate ports to find that the ports don't actually work. After searching various forums, I found that I have to:

1. Locate the panel where all the ethernet ports connect
2. Wire them to an ethernet switch.

I found the panel but all the wires look like this:

https://i.imgur.com/Qzm72g0.jpg

I'm not sure what I need to do from here to plugging into my network switch. Any guides or advice would be extremely helpful. I don't need every port connected to the switch, only one or two. None of these look labelled so I might have a difficult time isolating which cable runs where.

And about the network switch... Any qualms about using an old router that has the AP turned off?

I'm trying to package Elmer for use with NixOS, and could use some help from any experienced Nix users. My current attempt is located here. There is some junk left around in that file from my experimenting, but it's at least a start. There are also a few lines of error included in the comment here.

Any help is appreciated!

Just discovered Barbara Stant on a Spotify playlist but can't find much information about her. There is only one album on there and Discogs is only showing some features. Google is coming up with a big goose egg as well.

Just curious as to whether anyone has any info about her history.

Most recent update is here.

The Tildes community has been amazing and patient with me as a new and uninformed Linux user, and I'm greatly appreciative of that. I return to you today with yet another request.

Hardware

System76 Oryx Pro
Distro: Pop!_OS 19.10

Issue #1 (mission critical)

Brother MFC-L2750DW

I have a Brother printer/scanner for which I have installed the drivers using the .deb file provided on the Brother site. It's connected via USB. Printing works fine; scanning does not. My husband and I both need the ability to scan for our jobs, so this issue is pretty important to us.

I am using the program Document Scanner (I believe it's one of the GNOME default programs?). When I open the program it says "Searching for Scanners" and then recognizes my scanner, giving the model number and says it's "Ready to Scan". Whenever I attempt to scan, however, whether from the ADF or the flatbed, it says "Unable to connect to scanner". I am not sure how to proceed, and any guidance on this would be greatly appreciated!

Issue #2 (optional)

Hyperkin Duke Wired Xbox Controller

This is an optional issue and not at all one that needs to be solved by any means. A while back my husband got me this because it's my absolute favorite controller of all time (I know, scoff all you want!). It worked fine in Windows, but now that I've shifted over to Linux it has been sitting and gathering dust.

When I plug it in the controller rumbles briefly (which it also did on Windows), but other than that does nothing. No input is accepted. If it's easy to get this up and running in Linux, I'd love to be able to use it, but if it's not that's totally fine. I have another controller I can use, and again, none of this is essential to my work. I just figured since I was asking for help I'd throw this in here too.

If you need any additional information or need me to try any specific things, let me know!

I remember there being subscribe/unsubscribe buttons on https://tildes.net/groups

By default new accounts are subscribed to every group, earlier I could just goto that page and unsubscribe from groups I'm uninterested in. Looks like now you have to goto each group page and unsubscribe there.

I've been reading the docs after joining the site (hi!) and noticed a few places that were either outdated or unclear. Should I ignore them, given the disclaimer on the Instructions doc that says docs may not be current? Or is it better to report them?

Here's a list of what I noticed for context:

• Docs, outdated: User settings: Marking new comments - this is now the default for logged in users and has been replaced by the "Collapse old comments when I return to a topic" setting.

• Docs, minor typo: Commenting on Tildes: "Noise" label - "with no and Offtopic labels" seems to be missing a word between "no" and "and".

• Docs, minor confusion: Navigating Tildes: Comment highlights - the meaning of "Linked comment" wasn't immediately clear to me.

• Wiki, outdated: ~tildes wiki: Introduction: Settings - mentions the "mark new comments" settings

  I recommend setting up [..] and toggle marking new comments to highlight new comments in a thread.

Some guidance on what to do with discoveries like these will be helpful for those who read docs :)
I'm not really asking them to be updated here and now, but that's a fine outcome of this post too.

Solved!

Thanks to @pseudolobster's post here, I was able to resolve the issue by creating a new user account on the computer. I'm leaving the post up for posterity, in case anyone else is ever searching up this same issue in the future.

My husband is starting to transition to work from home. He is using his personal computer and just yesterday set up a VPN, Microsoft Teams, and Windows' built-in remote desktop so that he can access his work computer. Everything worked smoothly and he was able to finish out his workday from home just fine.

Primary Issue

This morning, upon booting his computer, he cannot access his Start Menu. It is on screen, and it appears clickable, but nothing comes up. Likewise, the search bar in his task bar is present on boot, but upon clicking the start menu for the first time it disappears and does not return. Other basic Windows functionality seems to be broken. Alt-tabbing does not work to switch between windows. System tray icons are present, but right clicking them and selecting an option does nothing. We cannot open taskbar settings or network settings this way, for example.

This might be indicative of a larger breakdown. Even by command line, I can't get to the Windows 10 settings or Windows Update. It seems like all of the "new Windows"-style interfaces won't start (though the old ones, like the Control Panel, do).

We can still open up apps by clicking on the links in his taskbar, and those seem to work fine. I can also get to the run command with Win+R.

He is running Windows 10, and as far as I know, it's fully up-to-date (I can't open Windows Update to check).

Additional Information

In attempting to diagnose this issue, I've come across several others that are potentially related. I don't know if these are relevant and they're not a primary concern at the moment, but I'm including them here in case they help contextualize what's going on.

There seems to be a runaway process that slowly eats up more and more memory over time, as well as a chunk of CPU. Sometimes it's called "Service Host: Windows Push Notifications User Service_#####" and sometimes it's called "Service Host: WpnUserService_#####" with the numbers changing each boot.

Also, in attempting to restart the computer, it sometimes (but not always) pauses with a notification about programs still running, with one of them being "Task Host Window" with the message Task Host is stopping background tasks. (\Microsoft\Windows\Plug and Play\Device Install Reboot Required) Finally, immediately before restarting, it shows an error message from "svchost.exe" which reads The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.

Is this potentially a malware/intrusion issue?

Attempted Solutions

I have tried, to no success:

• Rebooting the computer, both via a restart in Windows as well as by holding down the power button
• Signing out and back in to his user account on the computer
• Running sfc /scannow
• Running DISM.exe /Online /Cleanup-image /Restorehealth

Request for Help

I know we have a lot of techy people here, but I also know you are all probably busy with everything that's going on. Nevertheless, if anyone has any guidance or help they could give on this issue, I'd greatly appreciate it.

Also, it's been a while since I've used Windows, but IIRC there's a way of just resetting the whole thing and starting fresh? That's not ideal, but if that's the course of action I need to take, just let me know. Ultimately I just want this to work, by whatever method, so that my husband can be at home and reduce his exposure.

I've noticed that, even when I choose the "Keep me logged in" option, I usually have to re-log in to Tildes at least once or twice per day. Under what circumstances might the session cookie expire on such a short time scale? I can see that the Max-Age is set to one year, so I'm not sure what might be causing that.

Has anyone else encountered this issue? It's entirely possible that some of my add-ons are interfering (although I don't see how), which is the reason I ask.

I have to pull up my Tildes password and my TOTP generator in each case, which is just enough pain to encourage me to navigate to another tab instead.

EDIT: The problem has been solved. @Sill identified the problem here and @cfabbro found a work-around here. Crisis averted!

I listen to some internet radio stations on my computer, but a couple of them aren't working any more: they appear to play, but there's no sound coming from my computer's speakers.

It is only two stations. I've tested other internet radio stations I listen to, and they still work: I can hear them. I can play and hear YouTube videos. I can stream Spotify on my computer. I can play and hear my music files stored on my computer's hard drive. So I know my speakers work. I know Chrome works as a music player for other sources, including other internet radio stations. It's just these two radio stations.

One of them is this radio station. Also this radio station. I know their digital streams are working, because I can listen to them via an internet radio app on my phone. So I know their digital signals are being sent out. But, while my phone app can play them, my computer browser can't play them.

I've tested both non-working stations in Chrome and Internet Explorer. They both don't work in Chrome, but this station also doesn't work in IE.

I'm using Chrome 80.0.3987.122. And I'm running Windows 7.

This problem only started a couple of days ago.

What's going on? How do I fix this?

(I am trans-inclusive. I believe trans rights are human rights. I believe in self-identification. I will use whatever pronouns someone choose, and I try not to assume pronouns.)

In the UK recently there's been a bit of a debate between trans-phobic "gender critical" feminists who say that for sexual safety women need spaces that are women only, and that this means they need to exclude trans-people.

I think this is bullshit. I'd like some good quality arguments to use against this.

What are your ideas?

A while ago, maybe like a year ago? There was a thread and two websites were linked to that were basically puzzle sites. As in the sites themselves were the puzzle and you had to find clues in the site to get to the next page. It was very cool but I managed to lose the link and was hoping someone might know what I'm talking about. We ringing any bells?

I am talking about advice such as "make incremental improvements" and "ship the minimum viable product."

Is there a name for this kind of advice - advice related to software and tech.

I am looking to make a compilation.

EDIT: Latest update

This is something so rudimentary that I'm a little embarrassed to ask, but I've also tried looking around online to no avail. One of the hard parts about being a Linux newbie is that the amount of support material out there seems to differ based on distro, DE, and also time, so posts from even a year or two ago can be outdated or inapplicable.

Here's my situation: I'm a newbie Linux user running Pop!_OS 19.10 with the GNOME desktop environment. Occasionally, games I'm playing will hard crash and lock up my system completely, leaving a still image of the game frozen on the screen indefinitely. The system stays there, completely unresponsive to seemingly any inputs. It doesn't happen often, but when it does it's almost always when I'm running a Windows game through Steam's Proton layer. I suspect it also might have something to do with graphics drivers, as I'll at times notice an uptick in frequency after certain updates, though that might just be me finding a suspicious pattern where none exists.

Anyway, what I don't know how to do is gracefully exit or recover from these crashes. No keyboard shortcut seems to work, and I end up having to hold the power button on my computer until it abruptly shuts off. This seems to be the "worse case scenario" for handling it, so if there is a better way I should go about this, I'd love to know about it.

EDIT: I really want to thank everyone for their help so far. My initial question has been answered, and for posterity's sake I'd like to post the solution here, to anyone who is searching around for this same issue and ends up in this thread:

• Use CTRL+ALT+F3/F4/F5/F6 keys to access a terminal, where you can try to kill any offending processes and reboot if needed.
• If that fails, use ALT+SYSRQ+R-E-I-S-U-B.

With that out of the way, I've added more information about the crashes specifically to the thread, primarily here, and some people are helping me out with diagnosing the issue. This thread is now less about the proper way to deal with the crash than it is about trying to identify the cause of the crash and prevent it in the first place.

Simple question. For people's original poems posted in ~creative, should they be tagged "poem" or "poems"?

"poetry" is the broader category, and includes discussions about poets and poetry in general. However, when someone posts their poem, should that be tagged "poem" or "poems"?

The tagging guidelines say (or used to say - since I re-organised the Docs pages, I can't find this reference any more) that tags should be plural. That indicates that "poems" is the better tag. But the post contains a single poem, which makes "poem" the better tag.

Opinions?

EDIT: In the end, I went with the popular choice. When I looked at the tags used in ~creative, I found over a hundred topics tagged "poem" and only four topics tagged "poems". It seems that most people naturally choose "poem" when posting a poem, so I standardised the few differently tagged topics to use "poem".

I've recently started trying to improve my environmental impact, so I apologize for what might be a very basic question, but how bad is it to have items shipped/delivered to you, rather than picking them up from a store near you?

I'm specifically interested in two situations:

1. If I'm buying a specialty, zero-waste product that's not available in stores nearby, which is worse: having it delivered directly to my house, or having to drive a good distance in my own car to get it? Are the two roughly comparable, or is one considerably worse than the other?

2. I use a service called PaperBackSwap that is sort of like a big, distributed, online used bookstore. You give away books from your collection to people who request them, and for each book you send out you can request one to be sent to you. I like that it's putting books in the hands of people who specifically want them (as opposed to donating them or selling them to a used bookstore where they might be shelved indefinitely or pulped), but now I'm sitting here wondering how bad it is for that single hardcover of mine to travel halfway across the country. On the other hand, the book is getting reused, potentially multiple times if it then gets requested by others after that. Should I be considering this good reuse, or a waste of resources?

Outside of those two, I'd welcome any primers on the topic at large, as well as any best practices with consumer goods that I can start putting into place. I've already done a lot to find plastic-free alternatives to a lot of what I use, but I don't know if I'm trading one ill for another by getting them from places that have to send them from hundreds of miles away.

How does this work, why are some tags on separate line?

Example:

How big are the fires burning in eastern Australia? Interactive map

~news australia · Article: 207 words
natural disasters bushfires

The australia tag is next to ~news, not in the tag list below.

Not sure how spoilers are supposed to work here, but I deleted my other post and put the image in the comment

https://i.imgur.com/6EupcC0.png

T.W. - is Arthur imagining it in arkham asylum? When asked by the social worker he didn't have much of an answer why he was locked up before.

I'd like an app or preferably a website that I can use that will combine both discussion from reddit and tildes into one place. I actually haven't used tildes since April 2019 and the reason is because I just straight up forgot about tildes. There just isn't enough content on tildes for me so I find myself spending more of my time on reddit which means I end up forgetting about tildes.

From time to time I see people on the internet who remember Google Reader fondly, and miss it. At the time, I didn't have much use for something like it, so I never used it.
But a common theme in these conversations about Google Reader is that no other feed reader ever offered everything Google Reader could, but I can't seem to find details.

So what was it? Does anyone here remember Google Reader, or even still wishes it was available? Why did nothing come from the Open Source community that could replace it?