Yesterday I saw a mention somewhere online a story, maybe a book, maybe a short story. It was:

• science fiction
• literary is uncommon (actually illegal?)
• the main (?) character is obsessed with film and learns to read based on the words that appear in the background of the films he watches
• there are robots?

Does anyone know what this is? I tried search, but search is worthless nowadays.

Tildes links take about a minute to open on iOS Safari. Firefox Focus by comparison (again, iOS) has no issues.

I've tried clearing the cache/data for Tildes in the Safari settings. It may have helped initially but the problem persists.

I'm looking for a USB hub that:

• Has at least 4 usb ports
• The USB ports are all along the same edge of the device. (For easy access even when the hub is behind my monitor)
• Can be bus-powered (i.e. doesn't need to be plugged into an outlet)
• Has a detachable cable for the connection from the hub to my computer

It'd also be nice if it:

• Was USB 3.0
• Cost less than $50 USD
• Had a mix of USB-A and USB-C
• Didn't look ugly

I've spent a couple hours looking, and the only hub I've found that hits my hard requirements the 4 port and 7 port variants of a hub from StarTech.com . I was curious if anyone was aware of anything better in this price range, before I just pull the trigger.

Done in quotes because sometimes shows get cancelled or otherwise abandoned and other times it has a final season or only had one season and was properly finished. Either way, same result.

I don't have the patience or time to keep track of what series is having what new season come out at what point. I prefer to just wait for it all to be done and then watch in my own time. Even if it is one of the very few series I watch that isn't "done" I still don't do the weekly episode thing. I just wait for it all to come out and then watch as I please.

That said, I have a backlog of series that are on my to-watch list, either suggested by friends or I saw a trailer that looked good, but they sit there at present because there's so much utter shit SEO spam websites that you can't get a clear answer if a new season is coming or a series is done or not.

I have a Moto G 5G 2023 and 2025 Chevy Trax that I'm trying to troubleshoot why Android Auto cannot last more than 10 minutes without crashing out and needing to either wait for the connection to be available again, or unplug and replug the USB cord to get it to reconnect. Sometimes it goes for an extended period of time, and sometimes it won't last for longer than a minute before it crashes with no visible error on the phone. I think it might be something in RAM, but more often than not it's when Google Maps is up, with Audible in the background and I'm not sure if it's one of those or possibly my Launcher or having the three buttons turned on for my phone, or some weird esoteric thing.

Sorry if this is a dumb question, I've done some browsing and haven't found an obvious answer. Subscribing to the a tildes rss feed works great, except that link topics open the link itself, not the Tildes thread. I'd ideally want it to open the thread in the first instance, not the link directly. Is this something that's possible that I just haven't been able to figure out?

In the notification setting, I have untoggled both options but then I am wondering how can I mark a comment as read if I dont actually want to vote, label, reply or anything?

I am used to the reddit interface where iirc, you can just hit a button for toggle that state on a comment.

I watch Amazon Prime Video with Librewolf, but today I got the error message below. I already have DRM enabled. Any ideas how to fix this?

Prime Video is incompatible with your current operating system or web browser. You must update to watch Prime Video titles. Review the Prime Video system requirements. If the problem continues, please contact Amazon Customer Service and refer to error 7132.

Edit:

I fixed the problem by removing Librewolf and reinstalling it.

About a year or two ago, someone recommended a phenomenal dystopian novel about people who don’t have kids and are sent to live in a luxury facility where they serve a particular function for their remaining lives. It was by a Japanese author, I believe a woman. Does anyone know the name of the book and/or the author?

Bonus question: Any other Japanese sci-fi/dystopian/magical realism book recommendations?

Background:

I've been using a 9-year-old 13.3 inch Dell Latitude 7370 laptop running MX Linux to stream games via Moonlight from a beefier desktop machine. It is SO good and works flawlessly. My only complaint is the smaller screen size.

I would like to upgrade to a larger computer, and given that the computer will literally only be used for streaming games, it doesn't need to have great stats. I'm looking at used/refurbished models -- both for price and because buying something new feels like complete overkill for my needs.

My only requirements are:

• 17 inch screen
• USB-C charging

That's it! I'm assuming that literally anything I can get with that will work for what I need given that my small, decade-old laptop is already doing the same job perfectly. USB-C charging is a must-have for me. I already have USB-C power cords in all the places I plan on using it, and I don't want to have to use a separate charger for it.

My Situation:

Because I'm searching for used/refurbished models, I'm limited to what's available rather than going for any specific model of computer. I can easily find listings for computers with 17 inch screens. What I can't find easily is whether or not they support USB-C charging. Most sites don't have a filter for that, and a lot of the listings don't specify the type of charger used and just list "AC adapter" (or don't mention it at all). Many sites don't have pictures of the ports, or the pictures they do have are stock photos that aren't of the exact model.

Is there some easy way to find these that I'm missing? Some keyword, or a site that does have a filter for that, or brand knowledge that can point me in the right direction?

Also, if anyone has any recommended sites for used/refurbished laptops, let me know. I have had success with Backmarket for used tech before, but I'm open to recommendations.

I'm touching up a game with a dev who is getting their code ready for a FOSS build of their game. One of the more persistent bugs is something weird in the settings menu, where an option is focused and checked off, the text label disappears. Color override doesn't seem to affect the behavior, but if I go into the game editor and uncheck Clip Content and Follow Focus, the behavior flips and now it's focused and UNchecked text labels that disappear. I'm putting feelers out for advice on the usual haunts, and I thought I would ask here too.

Godot version is 3.6, the only modification is that it uses Godotsteam.

RESOLVED
/var/lib/docker/volumes/ <-- thats where the data is saved

I fucked up colossaly
I run a Nextcloud all in one instance on my ubuntu VM with Hetzner.
I run a backup of my phone to said instance.
I forgot to set a sensible limit on my Nextcloud.
I somehow changed to hourly backups....
My Vm filled up in a very short time.
My VM has not one byte of free space left.

What I tried to do:
open Console inside the Nextcloud Aio Container with docker exec -t -i , to find the space and delete stuff, but no chance, not enough space.

There is nothing else on the VM i know of that i could delete to make space (nothing else i put)

has somebody an idea how to fix this gracefully?

I have some ideas but they involve a lot of work or money...

• just pay for a bigger VM but i dont need more cores only more space, even that i dont really need (incures a monthly cost, cannot downsize afterwards as more space means you cannot downsize)
• clone my vm onto a bigger one, delete stuff, clone it back to the original one... (sound like a lot of work, incrues (little) cost, and feels like a lot of risk involved)

I'm looking for a book I read in middle school where people are factory farmed for their parts before they hit puberty by organic mech of some sort, but the protagonist escapes and is hunted but is able to hide in an abandoned (ship?) with some others and starts to fight back? For the life of me, my search skills are failing.

SOLVED
Bit of a long shot here because this is one of those issues where I search for the problem and you get a sea of replies like "have you checked the settings?" or "have you tried changing HDMI cables".

I just got a brand new LG OLED TV and I'm happy, but I've been watching Arcane on it and I notice jarring changes in brightness through the episode.
I'm playing through a native app (Stremio) on WebOS and it's not the source file, I've tested the same file on two different monitors and it's fine.
I went through the settings and disabled every autocorrect and "boost" capability the TV has to try and diagnose it, and the first pass did seem to improve the rate of changes, but it still happens maybe once every 5 mins of watch time.
From what I can tell it seems to be picking up particular colour/brightness changes in the source (Arcane is full of then being so vivid) and when it does, it just changes the brightness of the whole display.
I'm no expert here, I'm also colour blind, so I won't categorically claim it is definitely brightness changing, it could be contract or colour, I'm not sure, but it looks like brightness because the whole picture gets darker or lighter.

I wondered if it was actually flip flopping between SDR and HDR which honestly, it might be. If it is I have no idea how to fix that, as the TV seems to have no option to enable or disable HDR on native apps.

Any advice, thoughts, things to try would be appreciated. I'm technically orientated but I don't really know much about changing picture settings to be honest, I tend to pick the most basic/neutral setting and leave it like that.

Edit: I've dug out the old 4k firestick as suggested and don't get the flickering at all through that. Also running through the guide below helped make the picture look even better! Thanks everyone!
I might yet grab the service remote though and see if I can make the native apps work, then I can retire the firestick for good.

Picture explanation:

https://i.horizon.pics/tWovRax4kh.jpg

When I view my subscriptions page on YouTube, half the "videos" are recordings of completed streams, often 2+ hours in length. I'm not interested in watching these. For me, they're just pollution in the feed.

Apparently, a lot of the channels I subscribe to, whose videos I enjoy watching, also stream on YouTube a lot.

Second Wind is probably the channel I'm most hung up about. I like their normal videos, and don't want to unsubscribe from their channel, but jesus they stream two or three times a day.

(Also, it's annoying that when I view a YouTube channel, I can visit their videos page or their streams page separately. Why can't I have this same separation on my own subscriptions page?)

(Also also, I already use an extension to hide shorts (among other things), but it unfortunately does not have a feature for hiding streams.)

Fancy bullet point summary:

• I want to hide recorded streams from my subscriptions page
  • I don't care as much about hiding active livestreams, because those don't pollute my subscriptions page nearly as much
• I do not want to unsubscribe from any of the channels I follow. That is not an option
• I'm willing to stop using youtube.com in favor of an alternative client (web, desktop, etc) if that client supports hiding recorded streams from actual videos
• I'm willing to install a browser extension that can solve this problem (but I can't find one for Firefox)

Ninja edit:

While writing up this topic, I actually found my own solution. The browser extension I mentioned earlier has an "advanced blocking" feature that takes a JavaScript function as input. The extension's GitHub page has an issue, with a comment, with some code to hide streamed videos on the subscriptions page.

However, that code didn't work when I tried it. Thankfully, I just needed to check for videoRenderer instead of gridVideoRenderer.

Here's the updated code:

(video, objectType) => {
    // Only videos on the Subscription page
    if ( objectType === "videoRenderer" ) {
        if ( video.hasOwnProperty("badges") && video.badges.includes("live") ) {
	    return true;
        }
        if ( video.hasOwnProperty("publishTimeText") && video.publishTimeText.indexOf("Streamed") != -1 ) {
            return true;
        }
    }
    return false;
}

I have no idea what the consequences of checking against videoRenderer instead of gridVideoRenderer might be, and right now I'm too lazy to find out. This works well enough for now.

(The "consequence" might be that streams are hidden from the related/recommended videos in the sidebar of a video page? I actually hide that sidebar, so I wouldn't know. Oh, and they'll probably be hidden from a channel's streams feed.)

It isn't a perfect solution though. Streams that are "scheduled" still show up on the subscriptions page. However, I think channels can set streams and videos as scheduled? So blocking one without the other would be more complicated?

I welcome any feedback or improvements on the code.

GPU Purchased: RX 6650XT for $330+tax

Overview

I am currently looking at replacing my GPU, as I believe it is broken. I do not want to spend a high amount as money is a bit tight for me. However, I am open to spending a bit more than the cheapest option, if it will last me longer.

Current Hardware

• CPU: AMD Ryzen 5 5500
• RAM: 32GB DDR4
• PSU: 550W
• GPU: NVidia GTX 970
• Primary Display: 1080p60
• Secondary Display: 1600x900 60hz

Workload

I do not do need that strong of a GPU, since I primarily play games a bit older and I occasionally do video editing. For video editing, my video projects tend to be relatively lightweight, so I do not need a beefy GPU for it.

A couple game examples:

• Minecraft
• Far Cry 5
• Civ VI

Other factors

For budget, I am trying to stay as low as possible. However, I do want to buy new, as I am pretty sure my GPU is the problem, but do not know for sure so want to be able to return it. For OS, I am running Fedora KDE. I had my GTX 970 working with it, but I have heard AMD cards work better for Linux. Is switching to AMD better overall or just easier to setup?

Current GPU Considerations:

• $145 GTX 1030
• $260 RTX 3050
• $360 Radeon RX 7600
  All prices posted are in Canadian. I am open to others, these are just the first that came up as I was doing light research

Edit: After some suggestions, I am currently leaning towards the RX 6650XT for $330

The lecturer was Sarah C. M. Paine (works at the US Naval War College)
I believe the lecture host was The Heritage Foundation.
The lecture was focused on national strategies and motivations.
It touched on the differences between nations she described as maritime powers vs. geographic powers.
The part I'm most interested in watching again was her explanation of the compounding effects of economic sanctions over years/decades.

I believe this interview with Dwarkesh Patel touches on a lot of similar material

However I am 99% certain she delivered a very similar talk to The Heritage Foundation and the person I want to watch the video puts a lot more intellectual value into The Heritage Foundation than they do Dwarkesh Patel...

I'm also pretty sure I saved the heritage foundation video in one of my youtube playlists, but ... it's gone without a trace, and I'm finding no mention of it on The Heritage Foundation website now either.

Thanks and please let me know if I should post this under a more suitable topic.

Solved

I was idiotically installing a legacy driver instead of the current driver. I installed the current one and it is now working.

Background on Tildes

For background I posted about distro recommendations a few weeks ago: https://tildes.net/~tech/1ji6/switching_to_linux_looking_for_distro_recommendations. I settled on Fedora KDE Plasma.

Steps taken before the problem

I installed Fedora onto an unallocated space on my SSD, alongside Windows 10. I have tested that Windows 10 is currently working, and that Fedora starts normally. I have also used the boot media to install onto my laptop with no issues. However, on my desktop before installing GPU drivers for my GTX 970, I found Fedora to be quite buggy. This would include the session freezing and needing to be restarted , or my screen would go black with text saying something along the lines "desktop session cannot be unlocked, press ctrl + alt + f3 and login and run a command (I cannot remember the command)" and then I could switch back to my previous session. Overall, it was a buggy mess. My thought process was that it may be a GPU driver issue, and so I started the process of installing RPM fusion and installing the driver from there. I have a GTX 970, so I followed the section titled "Legacy GeForce 8/9/200/300" on this page: https://rpmfusion.org/Howto/NVIDIA?highlight=%28%5CbCategoryHowto%5Cb%29. The commands I ran after installing RPM were: sudo dnf update -y and sudo dnf install xorg-x11-drv-nvidia-340xx akmod-nvidia-340xx and followed all the prompts provided as necessary. I would then leave my computer for about 30min, before returning and restarting (thinking that a restart may be necessary to be fully using the drivers).

Current Situation

After going through the process listed above, I turned my computer on and booted into Fedora. My screen would hang on a black screen with a flashing white underscore at the top left corner. The computer would not get past this point, no matter how long it was left. Hitting "ctrl + alt + f2" would give me a working terminal that I could interact with, showing the basic CLI of Linux working. I did not play around much with the commands, but I do know the basic shutdown now command was working.

Troubleshooting Steps Tried

I was thinking that it may be due to the driver being X11 and I am running Wayland. I searched online and results seemed to indicate that this would not cause an issue
(I will add more steps here when people recommend them)

Hi,

Thanks for looking at this. There is a specific comment in a reddit conversation that I want to share in a few different places. It's important to me.

I tried this a few years ago when I wanted to participate in r/bestof and I could not make sense of the instructions that they provided.

I am not a technologically skilled person but I have learned a few tricks using markdown while participating here on tildes.

Can someone please give advice and possibly help me troubleshoot ? I will be returning to my computer and hopefully trying out suggestions about four hours from the time stamp on this post.

Solution

It was probably my motherboard. I got a new CPU and motherboard and it worked. I also upgraded from DDR3 to DDR4 ram in the upgrade process

Background

So my computer is not posting, and I am unsure the cause. I am not getting an error code, so that complicates things. I do not know if this motherboard will provide post codes, it does not have a seven segment display for providing post codes.

How it started

It just randomly stopped displaying any pictures, unsure if it happened while in use or when the computer was asleep. I was doing stuff at my desk and had music playing on my computer. The music ended and I did not put on more music and the monitors went to sleep. Later when I went to use my computer It did not appear to wake up, I tried fully shutting down and turning on my computer, and that is when this problem occurred.

Symptoms:

• When I power on, computer appears to start normally, with all fans spinning so power delivery appears to be working. Even GPU fans are spinning.
• Holding down the power button turns the computer off as normal.
• Nothing is displayed on the screen, my monitors do not even detect an input.
• USB devices do not appear to be powering on.
• Every minute or two, the GPU fans ramp up briefly, and then ramp down. It may be all fans are ramping up, kind of hard to tell exactly which fans are ramping up.
• With the AMD GPU, the LEDs for power turn on. However, I vaguely recall the GPU itself having some RGB when the system was running that was not on. How my computer was setup I did not see inside my case that often, so the RGB on the GPU is a vague memory from a few years ago and I would not put much weight in there being some RGB.

Hardware:

• MOBO: Gigabyte 9900FXA-UD3
• CPU: AMD FX-8350
• GPU: ASUS Radeon HD7870 or EVGA GTX 970
• PSU: Cooler Master Elite V2 550W

Troubleshooting Attempted:

I initially assumed it was GPU related as the computer appears to turn on normally, but then nothing is displayed. So another user shipped me his old GPU (the GTX 970), and I swapped it out with my old one, and the problem persists.

I tried swapping out the RAM

I tried a brand new PSU and that also did not solve the issue

Leading hypothesis

Since I have changed everything out except CPU and MOBO, I am thinking it is probably my MOBO. I am currently researching my options for replacing my MOBO, or a friend offered me his CPU and RAM from his old rig with a broken MOBO that may be a better option than replacing mine.

I remember seeing a fun website somewhere which was basically an isometric animation of a space station or something like that. It had a lot of tiles with a lot of fun stuff happening on it, it kinda had a "Where's Waldo" vibe. I think it had a number in it's name, like station42 or something like that. I can't find the website now. Does anyone remember what it is?

I recently moved to a new place with a new ISP, and my Mullvad VPN isn't playing nicely with Firefox like it used to. Can any of you networking gurus please help me troubleshoot?

When the VPN is enabled, most requests from the browser fail immediately. If I pull up the dev tools Network tab, I can see that these requests fail with an NS_ERROR_FAILURE message before any data is transferred.

I have Firefox configured to use "strict" Enhanced Tracking Protection. When I reduce it to "standard" my requests go through.

I'm also trying to use DNS over HTTPS with a custom provider (Mullvad, via https://dns.mullvad.net/dns-query). I'm configuring this in Firefox, using the "Increased Protection" DoH setting. When I do that, Firefox reports the DoH status as "Status: Not active (NS_ERROR_FAILURE)". This happens even when Enhanced Tracking Protection is set to "standard" — in other words, that reduced setting fixed the NS_ERROR_FAILURE for HTTP requests, but not for DoH.

So how do I fix this so Strict Enhanced Tracking Protection, DNS over HTTPS, and Mullvad all work together? I never had this problem with my old ISP, so I suspect something's being blocked at the WAN level that I need to circumvent.

• OS: macOS Sonoma 14.5
• VPN protocol: WireGuard
• ISP: AT&T Fiber

I'm just using the official Mullvad client app with mostly default settings. The fiber gateway modem/router came with some default packet filtering firewall rules but I disabled everything in the admin panel. Weirdly, rebooting my machine fixed this temporarily, but the next time I disconnected/reconnected the VPN it broke again. Other browsers (with default settings and no DoH) are working fine when the VPN is connected.

Edit: Solved! Solution here.

I'm not talking about the unsubscribe button that is at the bottom of an email that takes you to the sender's website to unsubscribe. I'm talking about the button that occasionally shows up in outlook or apple mail that is delivered by the application.

I have clicked unsubscribe using the built in unsubscribe button in outlook and apple mail, only to receive more junk mail from that origin later that day. These buttons don't seem to do anything. What are they doing behind the scenes that is supposed to be getting you off mailing lists?

I don't think I have an account on GitLab, so I'll just share this here and tag @Deimos.

It's not possible for me to log into Tildes on Firefox. I receive a "Page expired, reload and try again" error every time I try. It occurs in all cases, including:

• If I'm using a stale tab and if I open a new tab or refresh the page
• With browser extensions enabled and disabled
• In private browsing mode with no extensions enabled
• With Enhanced Tracking Protection turned on or off
• When I specifically add https://tildes.net as an exception in my tracking preferences
• When I'm not signed in or syncing data from another browser
• After I delete my Tildes password from my browser
• Even when I clear cookies/cache..

I have only tried this on Firefox desktop, but I found this Git issue from @Omnicrola describing the same problem for Firefox mobile. Some differences:

• My problem seems to happen every day of the week, not just Sundays.
• My problem does NOT resolve itself within 24 hours. I have to use a different browser like Cheome to log in.

Not experiencing this with any other website. Maybe the website/server/browser thinks I'm in a different timezone or something, as theorized in that thread, CSRF and all that, but I've been in the same place for a week or two now. If I go to Web Developer Tools I can see error messages like this:

Cookie “” has been rejected by user set permissions.

Cookie “session=abcdefghijklmnopqrstuvwxyz12345; Max-Age=31536000; Path=/; expires=Wed, 19-Feb-2025 22:34:16 GMT; secure; HttpOnly” has been rejected by user set permissions.

Request to access cookies or storage on “https://tildes.net/login” was blocked because of custom cookie permission.

That links to this page which isn't very helpful because I've already tried that. It's possible that I have some other privacy configuration in Firefox that's screwing with Tildes, but I wouldn't know what. Wondering if anyone else has experienced this and gotten around it?

[SOLVED]

... well, this is in many ways very unsatisfying, because I have no idea why this worked, but I seem to have fixed it.

Server A has two Ethernet ports, an Intel I219V and a Killer E3100. Several months ago, when trying to debug sporadic btrfs errors (I had my RAM installed incorrectly!), I had disabled some unused devices in BIOS, including the Killer Ethernet port.

Since I had no other ideas, and it seemed like this was somehow specific to this server, I just re-enabled the Killer port and switched the Ethernet cable to that port. I'm now getting 300 Mb/s transfers from my wireless devices to my server, exactly as expected.

I'm gonna like... go for a walk or something. Thank you so much to everyone who helped me rule out all of the very many things this could have been! I love this place, you all are so kind and supportive.

Original:

I'm trying to debug a perplexing networking situation, and I could use some guidance if anyone has any.

Here's my setup:

• UniFi Security Gateway
• UniFi Switch Lite
• Two UAPs
• Two servers, A and B, connected to the USW-Lite with GbE
• Many wireless devices, connected to the UAPs

Here's what I'm experiencing:

• Network transfers from the wireless devices to server A (as measured by iperf3 tests) are very slow. Consistently between 10 and 20 Mb/s.
• Network transfers from server A to all devices are expected speeds. 900-1000 Mb/s to server B, 350-ish Mb/s to wireless devices.
• Network transfers between server B and all devices (in both directions!) are expected speeds.
• Network transfers from the USG to server A also seem slow, which is odd. Only about 60 MB/s.
• Network transfers from the USG to server B and the wireless devices is about 300 MB/s

So, specifically network transfers from any wireless device to server A are slow, and no other connections have any issues that I can see.

Some potentially relevant details:

• Server A is running Unraid
• Server B is running Ubuntu
• Wireless devices include a Fedora laptop, an iPhone, and a Macbook Pro
• UniFi configuration is pretty straightforward. I have a few ports forwarded, a guest WiFi network (that none of these devices are on), a single default VLAN, and two simple "Allow LAN" firewall rules for Wireguard on the USG. No other firewall or routing config that I'm aware of.

If anyone has any thoughts at all on how to continue debugging, I would be immensely grateful! I suppose the next step would be to try to determine whether it's the networking equipment or the server itself that is responsible for the throttling, but I'm not sure how best to do that.

I'm looking for an article that was posted on Tildes in the last year I believe, on online communities and moderation.

I think it was a link to someones personal blog and the author was female. It talked about the challenges of moderating communities with free speech as a core value, because all it takes is a few bad actors pushing that to it's limits and it completely derails the community and puts too much strain on moderators.

The article itself was very good, but I also remember the discussion on tildes was a very good read as well. I have tried searching tildes, using google and chatGPT4 and while I can find a lot of good threads related to this topic, I can't seem to find this one with the article.

Does anyone remember this article/thread?

I realize it's maybe a long shot and it's just a vague memory, so I apologize if this is an annoying post, but it doesn't hurt to ask?

Hi all,

There is a tar.gz whose contents I would like to access. The file itself is quite old, last being updated ~20 years ago if I had to guess (I am not sure if this is relevant). The file contains legacy scientific code that I would like for archival purposes and can be found via the "code site" link here. However:

• When I download the file and run tar -xvzf radpack.tar.gz I get an error: tar: Error opening archive: Unrecognized archive format.
• Likewise, if I try to gunzip it I get gunzip: radpack.tar.gz: not in gzip format.
• Running file radpack.tar.gz only yields radpack.tar.gx: data, indicating file cannot find anything out about it.
• head radpack.tar.gz outputs a string of unintelligible unicode.

These are the different solutions I have come across after searching this problem, and to me is good evidence that the file has been corrupted in some way and that may very well be the case. However, for archival and historical purposes it would be great if I could access the contents, so I am compelled to search out other solutions. Are there other options I can try here? Is there some way to confirm that the file is in fact corrupted beyond recovery? Any help on this point would be greatly appreciated. I posted this on stack exchange as well but figured maybe the smart folks here might know.

EDIT:

Just to be clear this has been solved — a functioning copy of the archive was found.

Many people here have a skill for converting a url from a mishmash of sloppy looking text into something that looks like a clean line but that is clickable and works like a link. Can someone please explain?

Hi
With this LITE site ---> https://lite.duckduckgo.com/lite/
There isn't the Dark Theme that's available for original duckduckgo site.

I found a "My filters" rule on the web.

Add these two lines to My filters

lite.duckduckgo.com##html:style(color: rgb(141, 141, 141) !important; background: none repeat scroll 0 0 rgb(48, 48, 48) !important; font-family: 'Helvetica Neue','Segoe UI', Arial, sans-serif;)

lite.duckduckgo.com##a:style(color: rgb(201, 201, 201) !important;)

When the rule is used the search homepage looks reasonable.
And the search results...
The black background is not very black, not as black as Tildes black theme.
I can live with that.

But the red text under each result is very muddy.
Can that be improved?
Make it brighter Crimson or even Orange would look better.

Please let me know if this has already been answered - request in title.

I'm looking for it because of this post, and I'd also like to make the logo the android-homescreen shortcut for going on the tildes.net frontpage via mobile browser.

Hi, I was wondering if the current duration before voting gets locked on a post is still 30 days? I tried to find the answer in the docs but didn’t see it (apologies if I missed it) and all I turned up in a search of the site was a topic from 3 years ago mentioning the 30 days, so I wanted to see if that’s still accurate.

Thanks !

Kids or younger reader book. Fantasy genre.

In this book world weather can be controlled by sorcerers, and especially powerful sorcerers can summon dragons. When the sorcerers die the dragons vanish, except in the case of the most powerful sorcerers where their dragon is buried with them. The villain wanted the scales of the blue dragon that belonged to a sorcerer. There were also weather spells that were too destructive and were trapped, including the scarlet snow that made people fall asleep. The villain was holding the main character's parents hostage. The main character can summon a dragon. The main character is going to school to become a meteorologist

Other key words that may or may not be the same story -- Yeti, ball lightning, jar, lab, gardening supply shop

For those who are new to Tildes:
This site has quite a number of wiki pages which are maintained by volunteers (except the ~tildes.official wiki pages, which are the official documentation). Many of these community pages are now out of date, so it's a good time for people to poke around and make some changes.
For more information, including how to gain wiki editing privileges, see the announcement post from 2019.

A bit of advertising:
For those who don't know, I have been maintaining the Customizing Tildes page since 2020. It is the official successor of the Awesome Tildes project and has numerous suggestions for improving the Tildes experience using userscripts, userstyles, and uBlock Origin's filtering capabilities. Feel free to drop a message if there's something that needs to be added to the wiki.

The Actual Problem

Changes to the wiki are no longer syncing with the GitLab repository. The last commit on GitLab is from 2021!

I currently have a Lenovo N42 Chromebook far past it's EoL, for which Google is no longer supporting it. I have put Chrome OS Flex on it by reflashing the bios, and it's pretty solid, but I have no internal audio. Bluetooth audio and HDMI works fine, but no headphones, and no speakers.

I found this solution for trying to hack in an Alsa configuration from an Ubuntu Live Disk (https://www.reddit.com/r/chromeos/comments/swzxsy/comment/irk5kqk/) and I was able to follow the instructions and enable development mode, but when I try to run the alsaconfig script, I get this.

crosh> shell
chronos@localhost / $ sudo alsarestore
No state is present for card chtrt5650
/usr/sbin/alsactl: sysfs_init:48: sysfs path '/sys' is invalid

Found hardware: "chtrt5650" "" "" "" ""
Hardware is initialized using a generic method
No state is present for card chtrt5650

It may have something to do with those instructions being for a different build computer, but I am outside my sphere of knowledge, and anything else I could troubleshoot would be appreciated. Internal audio isn't mission critical for me, but it would be appreciated.

I wanted to label a comment as Exemplary today and when I clicked "Label" the option wasn't present. I've given Exemplary labels before, but it's been a while. I do know there's a cooldown, but I don't think I've given any out lately, so I wouldn't think that would apply.

I'm on Firefox, but I checked on both Chrome and Edge and I don't have the option there either.

[SOLVED]

Thank you so much for everyone's support and suggestions, it seems that I may have overreacted a little bit. One of the things that I did was send a form to Google, but the form was not really for this issue, so I wasn't hopeful at all. To my surprise, I received a message just now with instructions to recover the account and change the 2-factor phone number to my mother's current one. The cause of the issue is not clear, but whatever it was, they sorted it out. She is obviously ecstatic, when I went to her house two days ago I couldn't disguise my pessimism.

I set her recovery email to my own and will generate recovery codes shortly, so we're good for now. I instructed her on how to download all her data from Google (it's easier than I thought), just because this made her quite paranoid, and I'll take the opportunity to gradually move my family out of Google, as well as myself. Thanks for being so supportive, this was very stressful, to say the least! Sometimes it's nice to know we're not alone ;)

Original post

So, for some reason Google logged my mother of everything at once: browsers in two laptops and two smartphones (one Android and one iPhone). Trying to recover the account sends a message to a cellphone number she no longer has. I understand Google is basically unreachable, but there must be something I can do, right? We're not famous, but she does pay for YouTube Premium.

Hey Tildes!

I need some help with a specific tech issue, and I'm sure someone here can help me do it way quicker than I would be able to on my own.

General Request

I'd like to be able to scan a directory and find all of the largest files of a specific type (e.g. the largest .jpg files). I'm running Pop!_OS and I'm assuming there's some way to do this in the terminal, or alternately some utility I could use.

More Specific Details

I'm cleaning up my digital music library, and I realized in setting it up I made some errors by saving some very high res cover art. Many of my Bandcamp purchases come with a cover.jpg or cover.png file that is several megabytes large. I made the mistake of writing these into the files (adding, for some albums, an extra, say, 100 MB across all tracks). They also take a lot longer to load when I pull them up in my cloud music player. I'd like to be able to identify the albums with the largest cover.* files so that I can go in and replace the album art with a lower res version and gain back all that wasted space lost to unnecessary duplication.

I could go folder by folder and take a look at the sizes of each, but I figure there's an easier way to surface the ones that need my attention. Everything I've looked at online so far has helped me figure out how to identify the biggest files in general, but all that will do is surface the actual audio files, when it's the cover art that needs the specific attention.

Also, in case it's necessary information, the directory structure is Music/[artist]/[album]/cover.*

Any help will be very appreciated!

EDIT: Crisis averted! The problem was with the modem and not the devices connecting to it. I'm not sure why the first person I called at the ISP couldn't help me. In reality, the second person I called also didn't help, but something magically started working after talking with them a second time and rebooting the modem about 5 more times, so it turns out I don't need a new WiFi router at this time. That said, I will take these suggestions to heart, as I may be buying one anyway as a backup for when this inevitably happens again.

TL;DR: I probably need a new wifi router and want one that isn't malware and will work even if the company I bought it from goes under or stops making it.

Long version:
So today my wifi stopped working. I use an Apple Airport Extreme (the tower one that has a Time Machine backup in it). I've had it for 5 or 10 years and it's worked fine during that time, other than replacing the hard drive it backs up to. My spouse and I were sitting on the couch after lunch surfing the web on our phones, when we suddenly couldn't reach anything. The router itself appears fine. We can connect to it and see other devices that are connected to it, but for some reason, it's no longer communicating with the cable modem via the WAN port. It still backs up the computers in our house, though. I have tested the cable that was connecting it to the cable modem, and it appears fine. I can connect my computer directly to the cable modem without issue using the same cable. So my guess is that the WAN port is hosed.

However, I'm suspicious that something else is going on for 2 reasons. #1, the cable company (Spectrum) made me replace my cable modem last week. I did that, got my Airport connected to it, and after a call to tech support got it up and running. It's been working for the past week. I suspect the modem may have updated or changed configuration without me knowing it and that's the real cause here. They sent me a Wifi router with the modem, but will charge me $5.00/month if I keep it. I'd rather own the hardware. #2, I have an older Airport Express that was working the last time I used it. I replaced it with the newer model about 5 years ago so I could do backups. It fails to work in the same way. It seems like the WAN port isn't communicating with the cable modem. So, if there's some way to verify that the WAN ports on my Airports are or aren't working, I'd be interested to hear about it.

I am able to connect a wired ethernet switch to the cable modem and all devices on the switch can see the Internet just fine. I tried connecting both Airports to the switch via their WAN ports while the switch was connected to the cable modem, but that did not work. (Or at least, I couldn't connect to the internet via either Airport.)

So, on the off-chance that both my Airports have a similar failure, I need to replace them. I have gotten suggestions from others, but have been pretty unhappy with them. I have the following requirements:

• Absolutely must not store any information about me in the cloud (for example as Ubiquiti apparently does)
• Absolutely must not rely on any sort of connection to the manufacturer to work properly and must not phone home without my permission
• Preferably not a poorly made device that will die in 3 years
• Must work properly and at full speed with Apple devices
• Must not require a phone app to configure
• Must have ~3 ethernet ports so I can hardwire in my TV devices (AppleTV, TiVo, etc.)

Things I don't need, but aren't a deal-breaker if it has it:

• The ability to configure every little setting. I prefer to set it and forget it.
• Mesh networking. My house is not huge, the cable modem is in the middle of the house and my single Airport base station has good coverage of the entire house.

If you know of any device like this, please share!

It started a day or two ago. Three threads (I think?) jump from nearly 0% to 100% and go back as soon as I open task manager to try figure out what's causing it. My first thought was a virus or bitcoin mining trying to hide itself (though isn't that done on GPU's?), but Windows' Defender came up empty handed.

I know certain OS apps, like automatic VIRUS scans behave similarly, stopping when you click or type, but this culprit seems to only react to opening the task manager. It also doesn't start again until task manager has been closed for a while.

As the title suggests, I am lookimg for the name of an existing boardgame.
Some time ago (months), there was a discussion about boardgame recommendations. One person described a very interesting boardgame, which I wanted to gift my family for christmas, but I sadly closed the tab with it and I can't find the original post anymore.

The game goes as follows:
One player builds a construct with different shapes and colours according to certain guidelines. The other players now have to find the rules, which the presentated construct follows, by building their own construct and getting feedback from the gamemaster, if it fulfills their guidelines.

According to the poster, this game was originally a game a group of friends played in college, it became so popular that they created a sellable version. Recently they revamped it.

P.S. I am not really familiar with this kind of post, so if I did anything wrong, some feedback would be nice.

P.P.S. Is there some kind of function (maybe through tags?) to mark this post as solved, if hopefully someone managed to recognise the game?

So, I had an issue with the radionouspace.net website, referenced here. Since then, I've started hitting the exact same issue on a few other sites ... webpage never resolves, the browser just spins its wheels until it times out.

I went thru and systematically shut down all of my add-ons, no joy. Tried other browsers, does not work anywhere ... except, oddly, sometimes, in TOR. On a hunch, I fired up my VPN service and tried to connect thru a US-based VPN server ... and there it is.

I have now confirmed, multiple websites (I'm assuming these are all US-based -- have not checked) no longer resolve for me, here in Hungary. Can anyone, anywhere else in the EU, confirm this?

I'm guessing this is the US response to the latest GDPR ruling against data-sharing across the Pond, but I'm on a "news fast" and haven't been keeping up-to-date ... anyone care to fill me in -- the "in a nutshell" version?

Update: Definitely something local-ish, probably specific to my ISP. VPN thru Hungary works, non-VPN thru Hungary does not.

Recently a loved one of a friend has died and they would like to archive their entire timeline (no retweets), including media they posted.

I've looked around a little bit and the Twitter API only allows 3200 tweets to be exported. As this includes RTs, this goes back to about 2018, while the account was made in 2011, so it's missing about 90% of their tweets. Also, getting all the media isn't really possible.

Do any of you know a way to accomplish this? Or, can anyone direct me to scripts that crawl the page and save every non-RT tweet + potential media? I'm not very tech-oriented but I can at least run python scripts.

I should mention that I've so far checked out Allmytweets.net (returns RTs) and the Twitter archival project (or whatever it's called), which is a group of people that help in archiving accounts, but they haven't responded yet.