We're looking at doing a trip (2 adults, 3 young kids) from northern Italy to somewhere else in the region. We were thinking about Slovenia, Austria, or maybe Switzerland.

Any thoughts on where to go or what might be a good itinerary?

• budget is medium to high. Call it a few hundred dollars a day, not including lodging.
• we'll go in Juneish for about a weekish.
• the kids are too small to walk by themselves for long. We'll have strollers/backpacks/etc.
• we'd like to try some restaurants; we like fine dining but it's tricky with kids unless we engage a babysitting service at a hotel. I like museums, my wife is meh; some short hikes would be fun, but nothing too crazy. Getting some city stuff in would be nice. We also like looking at architecture, old castles, stuff like that.
• we enjoy doing some scenic driving, but no marathon trips with the kids in the back.

I enjoy writing letters, but my hands have progressively hurt more and more from handwriting. For a time, I tried typing letters on my computer, the personal feeling of my letters diminished. Having printed it out, looking clean and mechanically perfect made my letters feel less valuable, they didn't feel like I spent time on them.

So, for the last few years, I've typed letters on two older typewriters and that has felt like a happy medium. I make mistakes and have to fix them, sometimes the text looks odd or the paper moves, I love it.

I have two questions I need help with:

1. Does anyone know of a mechanical typewriter that doesn't utilize the rolling pin to secure the paper? When I write on cards, they have to be bent and sometimes they never retain their former shape. I'd also like to get into journaling this way, but can't feed a whole journal through the rolling pin.

2. Can anyone think of other ways I could write letters, other than the methods I've listed already, that may bring a personal nature to my letters?

Thanks!

Hey folks

I'm building out a backup NAS to hold approximately 350TB of video. It's a business device. We already own the hardware which is a Gigabyte S451 with twin OS RAIDED SSD but 34 X 16TB SAS HDD disks. I used TrueNAS Scale and ZFS as the filesystem because... It seemed like a good idea. What I didn't realise is that with dedupe and LZO compression on, it would seriously hinder the IO. Anyway, long story short, we filled it as a slave target and it's slow as can be. It errors all the time. I upgraded to 48GB of RAM as ZFS is memory intensive but it's the IOPs which kill it. It's estimating 50 days for a scrub, it's nuts. The system is in RAID6 and all disks dedicated to this pool which is correct in so far as I need all disk available.

Now I know ZFS isn't the way for this device, any ideas here? I'm tempted to go pure Debian, XFS or EXT4 and soft raid. I'd rather it be simple and managed via a GUI for the rest of the team as they're all Windows admins as well as scared of CLI, but I suppose I can give them Webmin at a push.

I'm about ready to destroy over 300TB of copied data to rebuild this as it crashes too often to do anything with, and the Restic backup from the Master just falls over waiting for a response.

Ideas on a postcard (or Tildes reply)...?

UPDATE:

After taking this thread in to consideration, some of my own research and a ZFS calculator, here's what I'm planning - bear in mind this is for an Archive NAS:

36 Disks at 16TB:

9x16TB RAID-Z2
4 x VDEVs = Data Pool
Compression disabled, dedupe disabled.

Raw capacity would be 576TB, but after parity and slop space we're at 422TB usable. In theory, if we call it 70% usable, I'm actually going to cry at 337TB total.

At this moment, the NAS1 server is rocking 293TB of used space. Since I'm using Restic to do the backup of NAS1 to NAS2, I should see some savings, but I can already see that I will need to grow the shelf soon. I'll nuke NAS2, configure this and get the backup rolling ASAP.

My bigger concern now is that NAS1 is set up the same way as NAS2, but never had dedupe enabled. At some point we're going to hit a similar issue.

Thank you for all of your help and input.

Hi all,

I've been interested for a while in learning to play banjo. My first exposure to it was listening to bluegrass, but recently I have gotten very into Celtic and Irish music, and I think I would most enjoy learning to play by playing that style. Hence I am interested in Irish banjo, which I have come to understand is a bit different. I have a few questions that I was hoping someone here could answer. I don't play any other instruments and I'm interested in this just for fun.

• My understanding is that the typical Irish banjo player plays a tenor banjo with 4 strings. However I see some variation between 17 and 19 frets. Does anyone have some insight into the difference here, and which might be preferred?

• How hard would it be to learn other styles if I start with a 4 string? Is it like going from playing bass to guitar? Is 4 string typically seen as easier to pick up? I like Celtic music but not totally sure I want to be "locked in" to that. But then again, maybe that would help to be a bit more focused.

• To get specific, I am thinking of buying this as a beginner banjo. I'd be surprised if so, but does anyone here have experience with this brand, or else have other recommendations?

Like I said, I am a total beginner in that I've never played any instrument. So on that note, if you think I'm asking the wrong types of questions, I'd want to know that too!

I got my friend a midi beatpad a while ago and he's about to start using it to experiment with music. Does anyone have any tips I can pass on? Any help with software/equipment would be greatly appreciated.

I am and have been on a bit of a quest to make my computing devices suck less.

Over the last few years I have migrated all of my laptops and desktops over to various Linux flavors. My experience with this process is that each flavor has their own quirks that need to be ironed out, but after getting things running there is little in the way of maintenance. Things kind of just work nowadays.

I have been looking into getting something like (but not necessarily) LineageOS on my phone. As I am looking into this and reading forums on the subject, it seems like a perpetual arms race between application developers and application users. One puts in a way to check for root, then there are root hiders, then there are root hider checkers, then there are root hiders that you build with custom names, etc.

I want my device to not suck.

I don’t want to be going in and fighting with my banking applications every time there is an update. I am totally willing to fight a painful setup once.

Is a custom phone OS something that is essentially only viable to use if you are driven by spite? Am I reading too much into the struggles that are posted in various forums? I am looking for any input for anyone that has used a custom OS short or long term.

This is a silly sounding topic, but I'm unfortunately in such a situation and want to be a step ahead in self defense. My ex wife and her new boyfriend have been overheard by my kids saying that they're going to "get me" or generally do something bad to me. They are not physically strong people so I'm not worried about a violent attack, but they are intelligent people and I'm worried about all the other options the internet leaves open to them. My ex obviously knows my social security number so I have already locked my credit with the three agencies (Experian, Transunion and Equifax). I have also changed every password I can think of and have security cameras around the entrances to my home. What else should I be doing? Are there legal consulting services or routes I should be looking into to prevent possible problems? I don't want to go overboard with this (and I promise I'm not a paranoid person) but I want to take any reasonable precautions I can to prevent bigger problems.

Overall band score 8.

What's the next step? I am an Indian and wish to pursue a master's program in the US.

Should I prepare for the GRE and apply for spring semester? Total newbie about all of this university stuff.

Thanks in advance.

I live in what is basically a studio apartment in someone's basement with a little cobbled-together kitchen in a small room attached to my bed/sitting area. My cooking is done in a largish Cosori convection toaster oven (mine) with a double-hob induction hotplate (kindly provided by landlord) sat on top. The hotplate is from Nutrisystem (not sure of model exactly) and it's definitely a step up from the electric one I brought from my old place (My kitchen was the laundry room there!), but over the last few years there's been a few things about it I don't like so I'm considering buying a new one.

The main problem I have with it is the lack of specificity in the temperature settings: it goes 140°, 210°, 260°, 300°, 350°, 400°, and above that I never really use, but I often have trouble with something cooking too fast at, say, 300° but too slow at 260°. I'd like a device that lets me make smaller, (like maybe 5-10 degree) adjustments at the very least. Also there is the issue that if you go above a certain temp on one hob, it will dial down the other automatically to keep from going over max watts, but it also means I can't boil water on one while searing a steak on the other. Not sure if there's a way around that what with the limitations of current portable cooktop technology and American house wiring codes. As you may have gathered from my living arrangements, I need to keep the cost down to a reasonable <$300, preferably <$200.

Because it needs to sit on top of my toaster oven, I need a side-by-side arrangement. I was gifted Amazon cards for Xmas so I'm hoping to find something on there to defray the cost, but if anyone can point me to the perfect solution somewhere else, I'm interested. Everything I've looked at there so far has preset temp settings and I can't tell if they are fine enough to be any improvement.

Bonus points if anyone knows of an induction-compatible stovetop griddle that heats evenly and isn't heavy-ass cast iron.

Thanks in advance for any advice!

I had a few questions about the game, because it's currently on sale for about half off (with the sale and the 33% coupon stacking) on PC. It was nominated for GOTY and won a lot of awards, and I hear a lot of praise for it, so as a Control (2019) fan I'm interested.

1. Do you need to play Alan Wake 1 to get the story? I heard someone say the second one summarizes Alan Wake 1 for you, but I wasn't sure if that's true.
2. Would someone who loved Control and RE4 Remake but hasn't tried Alan Wake 1 like this game? (spoiler-free answer if possible)
3. What did you think of the game? Was it any good? Was it worth the purchase?

I'm trying to change some nasty habits at the moment. My year's theme is self control, and beating addictions is a large part of it.

The symptoms I've been trying to fight off since last year: Snacking often, eating portions too large, eating past hunger/always finishing my plate even if I feel full, craving greasy fast food, craving sweets/sugar.

Progress is mixed. I'm trying a lot of things; I've reintroduced a 20:4 IF routine (my body is naturally somewhere around 16:8 - I never have breakfast) but I've had a lot of trouble obeying it for more than a few days.

I'm realizing, today, that one thing I have not really been looking at is the cravings. This HN thread is what clicked for me. I know that on a "healthier" diet, I crave very different things.

I'm looking at options on what I can introduce (gradually) to start getting my gut used to different classes of foods. I don't intend to switch to being vegan/vegetarian, I'm just looking to stop craving fat, salt, and sugar.
Or rather, not necessarily crave, but "if I see it I want it" kind of thing. I want to be able to look at a packet of crisps and think "blergh" by default, even if I'm hungry.

What advice I am looking for: Suggestions on snack replacements, juices, various tasty meals etc; things I can actually go for from day 1. I am not looking to do any large swaps. I am also not looking for extra effort; right now, a 99 percent of my meals are either store-bought, microwaved, or restaurant/takeout. I don't cook because I don't enjoy it nor usually have the time.

Example: I've decided to introduce ginger shots to my diet, see if it'll help. I'm also going to try having carrots on-hand more often as I really like those.

Note 1: I am considering giving Hello Fresh a shot next month, since I've never actually tried it, but I'm lukewarm on what'll happen.

Note 2: Allergic to bell pepper; dislike eggplant, celery, zucchini.

I work at a Series A startup. I joined on the promise that it would be 16 backend engineers a year from when I joined. It never grew and maxed out at 8 (non-eng headcount experienced the most growth). Fast forward to 18 months and it's looking like between parental leave, illness, responsibility differences, and general departures, in a few weeks I'll be one of 2 backend engineers actually writing code, and one of 3 backend engineers overall.

There's 1-2 resume-building projects I'd like to stay for, but it's likely that one of them will get deprioritized. I've never been happy in this role for a slew of reasons, reasons for which others have left. This could very well leave us at 1-2 backend engineers in Q1-Q2. We are hiring, but I suspect we'll only backfill 1 role as 1-2 engineers are on "temporary leaves" (but one leave is 3 months, the other is basically indefinite).

Any advice on what to do in this strange situation? I'd like to say that I'm considering quitting and want to train another backfill, but it could hurt me more than anything else. I'd be interested in more options (no backend engineer's comp has increased in the 18 months I've been here except 1 underpaid / underleveled person) or a small sabbatical of 5 weeks. I wouldn't mind a senior title but lots of qualified engineers have been rejected for it so I stopped putting weight on the title. But all of those are a little rude to accept if I quit less than 6 months after.

edit: removed some typos, clarified some timelines e.g. months -> weeks

I happen to be in possession of a 2013 MacBook Pro that runs macOS 11 Big Sur and it's decent for that.

Let's say I wanted to run the latest apps and macOS on it, things that don't work on Big Sur. I know there are unofficial ways to get those on the MacBook, OpenCore Legacy Patcher is what most articles recommend that I've seen.

Has anyone here tried that, and were there any big problems with that setup? Were there any broken apps or features after upgrading? Did everything become slower?

Hey all,

Bought a house 2 years ago, and have had a handful of issues where I had to call someone out to take a look. Whether its plumbing/HVAC/whatever, sometimes they are clearly things I couldn't do myself, but other times, it feels like something I could probably do if I put aside the time.

Most recently, our sump failed resulting in some flooding and we had to get it replaced, which ended up costing $700 USD. I know pumps only cost around $300 and generally understand what work needs to go into replacing it, but was worried I may miss something crucial, especially when replacing the piping and screw the whole thing up. On the flip side, I've had a lot issues with our furnace, so the last time an issue came up, I spent an hour on Youtube and just figured it out myself.

Sometimes it just feels silly spending a bunch of money on labor, when its something you could spend an afternoon doing yourself. It just feels hard to gauge when its worth investing the time to figure it out myself or not. I also never know what to do in the situation when the person who took the time to come out gives me a price, it feels like your essentially trapped at that point.

Anyone with more home ownership experience have any advice?

Hey everyone, I've recently made a large batch (90ish) of cookies trying to repurpose brownie mix. It's the Ghirardelli kind if you've seen it before.

On the plus side, the texture's great, it looks like a cookie, and it's chewy like the edge pieces of a brownie. It's very chcolatey, and you can see obvious chunks of chocolate. On the minus side, it's extremely sweet.

Does anyone have ideas on how to use this somewhere else less sweet?

Some ideas I've had so far include crushing the cookies into chunks, and using those chunks to make more cookies (all the ingredients except sugar), like how one would reuse old asphalt do when repaving a road. Another idea is making a cake with these scattered throughout, or using it as a cheesecake crust.

This is an off-shore sweat-shop knock off variant of @Akir 's "Kitchen Towel" installment of "Someone Asks Basic Life Questions to the Internet" thread, which was very popular.

Short problem: So many different types of stuff around the house and I'm sick of it.

Longer problem:

I have dozens upon dozens of types of towels, gifted to me from teenage years from someone, and I've never managed to be able to buy my own towels. And it sucks. They're all different types and styles and sizes and fabric and....I'm old now and I hate it and I just want to fold ONE type of towel in the bathroom and ONE type of towel in the kitchen. I would like different colours for different purposes, maybe I can decorate them myself or whatever -- but I want standardization. From @Akir's thread, I learned about "Flour Sack Towels" from @tanglisha and omg where had that advice been all my life. I feel like seeing the light at the end of the tunnel for kitchen towels.

What I need:

Recommendations for all types of household goods that have stood the test of time, where I can obtain the same product from multiple sources or one long standing brand that is not interested in diversification.

one common type, common functions, common properties

Example: Corelle dishes. I have "big plates" and "little plates" and "bowls" that are all the same size and form, and at thrift stores I can easily find replacements of these common types, even if they were made decades apart and in different patterns. All exactly the same: serves the same and washes the same and stacks the same. The company seems uninterested in discontinuing their line of products and I love them for it. I need the Corelle of all things.

What are your trusty brands and types of "things" that are so obvious you'd never have to think about buying any other types of? Something so standardized that in your region they're just known as "----" instead of what they are actually called or brand name or size?

Do you know a brand that just makes ONE thing forever and they'll never change? Or a public domain type of thing that's an industry standard? I need to know what they are. Nails? Screws? Tools? Computer things? Cables? Cutlery? Knives? Types of household chemicals? Spices? Meat cuts? Margarine? Storage bins? Kinds of wood? All kinds of things, please.

Side question about existing, gifted, singleton household towels and socks :

I'd like to ask about what to do with my existing million different types of socks and towels. I want to buy my own as an now older adult. At what point should I flat out tell them to stop giving me socks and towels? Do I just suck it up and keep quietly re-gifting them to food bank? What about all the ones in current rotation? I would hate to throw out stuff but at this point I'm nearly ready to do it.

It's been years since I've had to use a an actual computer for anything serious and I want to regain my literacy with them. The height of my computer usage was the Windows XP/Vista era. I got it because I wanted to throw myself into a couple of different programming/coding courses.
I chose the Surface Pro because of the detachable keyboard/stylus setup and the fact that I don't have a good way to set up a desktop computer. Also I've always fantasized about being able to do work in a coffee shop or in a comfy chair by a lake lol.
Can anyone share some tips/tricks that might be useful to me? Anything from hotkeys, task management related things, or just general quality of life things I should know about would be super helpful. I'm so used to smartphones being able to do everything and feel like I'm a little in over my head here. Thanks in advance.

In one of my secret santas this year I have bought a digital copy of a solo RPG to give, however as it's only a PDF I'm not really sure what the best way to go about presenting this on the day of the exchange would be. I want there to be something for her to open, I know that much. In an ideal world whatever she opens will link to a download of the PDF or something, so maybe a QR code situation of some sort?

I just got into felting, and I have already made 3 siamese cat ball.. ornament... things. I plan to sell these on Etsy for some side income.

Does anyone have any good sources for wool, with a good selection of colors (preferably earth tones)?

What about tips in felting strategies for things like keeping lines neat, or blending colors together, fading them, general design layout planning, etc?

Pics of my first felt cat, the seal point: https://imgur.com/a/u6hJOgy

This link gives some useful detail about Dell Latitude model numbers.

https://en.tab-tv.com/dell-latitude-identification-and-decoding-of-the-laptop-model/

Unfortunately, it only goes up to 2017.

The first digit is the "series". There are several series, higher numbers are better.

The second digit is the screen size. 1=11", 2=12", ..., 7=17".

The third digit is the year. 1=2010, 2=2011, ..., 7=2016, 8=2017.

The forth digit is connected to form factor - standard, removable screen, transformer.

My question is whether there's a similar decoder ring for newer models.

EDIT:

Okay, so, newer models appear to follow similar convention, with slight changes to last two digits for year.

eg, Dell Latitude 9510 = premium ultrabook, 15" screen, released 2020.

eg Dell Latitude 7440 = ultrabook, 14" screen, released 2023

The first digit identifies the range:

• 9 = premium ultrabook
• 7 = ultrabook
• 5 = mid range
• 3 = entry level

The second digit is the screen size:

• 5 = 15"
• 4 = 14"
• 3 = 13.3"
• 2 = 12.5"
• 1 = 11.6"

The last two digits give the release year:

• 90 = 2018
• 00 = 2019
• 10 = 2020
• 20 = 2021
• 30 = 2022
• 40 = 2023

Two hours ago I randomly thought "hey, why not do LFS?", so I opened my laptop and started following the book. I've heard a lot of people say that LFS is great for learning how a Linux system works. However, so far it's just been a guide on how to compile different software and what autoconfig flags to use. I thought that maybe further chapters will have more information on how things work, but it seems like they all just contain a one-line description of a program and compilation instructions.

If anyone here has done LFS, did you actually learn anything from it? Is it worth spending more time on?

(I already wrote this once, but my phone didn't like it and randomly deleted the whole thing... ◕∩◕ )

I've been wanting to develop some games for a while now, and I have an overarching theme idea in mind. I couldn't decide on top down pixelated game or 3D style, because it's more of a visual story kind of game, where you explore, build a base (or several), meet and talk to NPCs, learn the story, etc. I want a lot of detail but I only have (minimal) experience with pixelated games. So naturally, 3D sounds better for a higher detailed, and maybe stylized environment.

I don't know much at all about code ( for example, I had to look up how to format this post). I don't even know what languages there are other than Java. I make resourcepacks for Minecraft, but that's minimal coding for the .mcmeta file. I do also make fabric mods for it, but I use MCreator for those, which I'm sure is like training wheels for coding.

I have the skills for graphics for both characters/environments and GUI/HUD elements. I have an idea for my story, and a few ideas for characters. What I know I don't have is experience in balancing things like economies, rpg skills, fighting, and weapons/armor and their upgrades. But I'm not really planning on implementing those, at least not right now. (The economy would be first if I did)

I recently saw a video on youtube showcasing Unity Engine's nanite environments, and basically, I want in on that. They're gorgeous.

The Questions

So my 8 questions are, on a scale of one to ten (ten being basically impossible for one single person to do), how difficult would it be to make these elements in a singleplayer, 3D game for someone without experience (like me):

1. Sky, ground, objects (like trees, flowers, rocks, etc) and other environment visuals' 3D models for exploration? I need to be able to walk on it, and maybe hit things like trees for lumber.

2. Base building and gathering the materials to build? This comes with the inventory issue as well (looking at you, Minecraft), which I'm still trying to figure out how I want to do this.

3. Crafting said gathered materials for building elements and items to gift to NPCs? This will need GUI and workbench, most likely.

4. Collectibles? Think koroks from BoTW or the museum artifacts in Stardew Valley. I'd like for the player to be able to display these only in/on a shelf/table/glass case inside their base(s).

5. NPCs with many hours worth of randomized dialogue interaction, gifts to and from NPCs, as well as a few friendship levels and unlockable interactions/gifts?

6. What would the time frame look like for me to learn Unity's Engine for these elements, or is there a better engine I should be aware of?

7. What materials might you guess that I'd need to spend money on to make this game? I already have: a Mac, the Adobe Suite, a drawing tablet, all the time in the world, and ideas. Would I need a license for anything?

8. What have I overlooked? 3D modeling (and not just blocky models in blockbench) is a skill I realized I'd need to learn just as I was writing this post.

The reason I'm asking so many questions is because I can't tell if trying this will be worth my time or not, and if I could afford to hire someone for parts of it, if need be. I have ADHD, so I'm wondering if this is just the "new shiny thing" that has caught my eye (probably is). I don't want to dive into a major learning session and project development if it ultimately won't go anywhere because it's too hard for my smooth brain.

Then again, I see some games (what I would consider low quality) that I'm like, "man, I could've done that, that looks so simple and easy!" So basically I have no idea whether I'm near the peak of Mt Stupid on the Dunning-Kreuger graph, or if I'm past it and somewhere in the valley.

Any advice is greatly appreciated.

Also, feel free to talk to me like I'm a dumb 5 year old.

Welcome to this exciting episode of "Someone Asks Basic Life Questions to the Internet"! In this installment, we ask for help from members of the audience who really know where their towel is. Do we have a Betty Crocker in the house?

Right now I have 2-3 crusty and mostly useless kitchen towels strewn around my counter space. For some reason, kitchen towels just kind of evade my attempts to manage them well. I tried to keep them folded in a corner of the counter, but I never liked the idea of putting them back there after I used them even if it was just to clean a water spill. Putting them in a drawer was this but worse because they bunch up and seize up on the frame it goes into.

On top of that, I'm never sure exactly how to keep them clean. Most of the time I avoid using them to touch food or to clean up with; I clean up with sponges and use paper towels for when it needs to touch food. But I think that paper towels are kind of wasteful, so I want to stop using them. There are also some applications where paper towels simply don't work that well to begin with, especially when you need a sturdy wet towel. I'm wondering if I should just be sticking them in my weekly laundry loads, but I tend to forget about them for a day and don't want to have a need for them while they aren't usable.

So I was wondering through a book store and I found the Greninja ex Battle Deck, which I thought looked really cool, and I've always wanted to own a Pokemon deck, even if I don't have anyone to play with.

I learnt the deck is meant for absolute beginners and that it doesn't stand a chance against meta decks, but I expected that (it's the same for Yu-Gi-Oh structure decks, you usually need to buy 3 and add a bunch of staples to get something slightly competitive).

Now since I can't play with anyone IRL, I hopped on Pokemon TCG Live, scanned the deck's QR code and built a better version of the deck using this video from LittleDarkFury. Except I replaced 2 Starmie and 1 Staryu with 1 Comfey, 1 Pyukumuku and 1 Lapras because I don't have anything else that synergizes, and I ran out of credits. (I can share the decklist if needed.)

Mostly because I dumped all my credits into building a Giratina Lost Zone deck because I felt cocky and then I realized I have no idea how to play it. That was a mistake.

My problem right now is that I feel really aimless, I have 2 decent decks but I can't really seem to get the hang out of them. I do understand their main win conditions (get Giratina VSTAR out, respectively get Greninja ex out) but besides that I don't really know how to play them. It does feel like I just need to get a bunch of games in, to see what decks other people play, and what situations I need to adapt to.

Locally there are no game shops I could go to, but I would have loved to play with someone IRL and have them guide me through everything. This means I'm stuck with online resources, but most of them are aimed at players that already know the game.

What do you think I should do? I'll keep playing games in hopes something will click with me, but until then, I'd appreciate some guidance (feel free to ask me anything in case I didn't give enough information).

I am an experienced programmer (mostly M$ stack -- C#, etc).

I started learning mobile Android development a few months ago, learning both Kotlin and the larger Android development environment at the same time. I got bogged down in tutorials and guides, because half of them teach Jetpack Compose methodology and half teach XML layout ... and, often enough, don't bother to mention which method they're using.

Which should I learn first? I am initially interested in learning Android dev for my own hobby/fun/side projects, but I would--ultimately--like to be able to put "Android developer" on my resume.

Jetpack definitely looks better, more modern, more OO, and I expect it will eventually become the new standard ... but that could still be many years down the road. Also, while it might be "better"--especially for larger projects--it also smells more complicated.

So, ultimately, I guess I should learn both if I actually intend to become an Android dev ... but I should definitely get comfortable with one, first ... so, which one?

So for the past two years, I've been a residential Cable Technician working for a subcontractor for Cox (Comcast). After many applications, I finally landed a position. I'd been trying to get a foothold into IT for a while now; my A+ is nearly expired at this point. I was pretty stoked to actually get the position. The position is a "Level 1 IT Specialist" at a private school. Utilizing company software to respond to tickets, fix issues for admin staff and teachers/students. The only hitch at first was that I had to shave clean (Silly, I know). Begrudgingly, I relented. That's fine, it's not particularly impressive anyway.

Today, I got a call from the HR rep who did my onboarding saying that I would also unfortunately need to cut my hair to follow their guidelines of hairline above the collar. This is a huge deal for me, as my hairline is currently at the middle of my back. I just wear it up for work. This would truly devastate me. The people interviewing me (3 of them) said it would be fine, then the employee handbook stated otherwise. When asked, the HR rep said she'd contact a supervisor, supe said no, and now she's referring me to another department (Benefits? Dunno how that's relevant) to try to make an exception or something to that effect.

Beyond just wanting to lament the likely loss of 4 years of work, I did want to ask those who are more experienced in the IT field than myself: Is this job (the IT one) one that will absolutely help me progress in my IT career? I know I didn't give the most detailed explanation of it; I hardly know everything myself. It was hard enough to finally have a job get back to me. And I was accepted rather quickly. But the loss of my hair gives me pause, and makes me wonder if I'm better off at my current job and waiting for another opportunity that might never come. Should I just grit my teeth and accept this blow to my identity for the sake of furthering my career? Any advice at all is welcome.

I doubt I'll find any new ideas, but maybe someone here has one. I'm running out of places to turn, with no solution.

I have been in a fight with Fitbit support for a few weeks now over their push to migrate everyone to a Google-linked Fitbit account. I'm pretty sure what I've found is a rare edge case of a bug, or rather, an unaccounted for set of conditions when trying to migrate.

A long time ago, 2017 I think, I created a Google-linked Fitbit Account (via oauth, "Login with Google"). I used it briefly and then stopped, and completely forgot about its existence.

In 2022, I got a Pixel Watch and created a new/second Fitbit Account with a different email address, as I did not remember I had a Fitbit account already and I wanted to use a masked email address through my personal domain.

With the push to migrate all Fitbit accounts to Google accounts, I decided to try to do so last month. When I attempted to migrate my second account to a Google account, I got an error that I already had an account registered under my Google account. So I logged in to that old 2017 Google account and initiated its deletion. It told it me would take 30 days to delete it, so I waited 31 days.

31 days later, I tried to migrate my second account to a Google account. When I try to do so, I get an error:

Can't use Fitbit with this Google Account
This could be because you're using a Google Workspace account, or because your account is supervised.

My account is neither a child account, nor a Workspace account, it's a standard (adult) account I've had for something like 16 years.

So I tried to see if my old Google account was perhaps not deleted after all. I tried to log in to my old account via oauth (Sign In > Continue with Google), and I get a different error:

Sign in again to continue
Since you deleted Fitbit from your Google Account, you’ll need to sign in again as a new user.

I suspect that what happens when I deleted my old/original Google account is that it wasn't actually deleted, but made inactive with some "deleted" flag, but the account hasn't been purged. As a result, I'm unable to migrate my new account to the same email address I used for my old Google account.

Reaching out to Fitbit, they continually put the blame on Google for reporting my account as a workspace/supervised account, and the only solution they'll offer me is "You should create a new Google account". Google has also been unable to help, but that doesn't surprise me, as I don't think it's an issue on their end. Requests to Fitbit to escalate my case to a higher tier of support and/or someone from some type of database team have been stonewalled, and I think that Fitbit support has now just stopped responding to me entirely.

Does anyone have any idea where I could turn?

Hello, as the title says: someone registered their phone subscription using my email. It doesn't make sense as I (obviously) never permitted this stranger to use my email for their subscription.

I say stranger but I now know their first name, their last name, their billing address, and their phone number by now. It's crazy.

I would just like the emails to stop coming! I know I could just make a filter to forward everything from this domain to spam but is there a way to actually make the phone company to stop sending me things?

The emails are coming from a language that I don't know how to speak (so calling customer service is not an option here).

I tried using the "forget password" option but for some reason that's not arriving to me. Probably it's pinging their phone first to verify that it was them who initiated it.

The best customer service I can find is by WhatsApp but it's a robot that always asks the stranger to verify that it's them.

So as the title states, I am realizing that most folks don't have CD readers. I do, and I can burn my phone's videos to one, but... I also use Linux these days. I have a CD burner somewhere around here, but honestly I just want to do a "zip file" type option, where I can just group the videos and get them on a usb stick to send out.

Everything I find on the 'net is about burning CDs and whatnot... which isn't my goal. Honestly, I think windows did this just easy-peasy with select and "burn to image" or whatnot. But I dunno how with Linux (Arch/i3).

Edit: I'm asking because I don't see any options in pacman. It may be in yay, but it's my bedtime...
Edit 2: Lots of folks asking why I want an ISO and not just copy the files; my dad states their TV will play videos 'in a DVD format from a USB stick' (and I don't know how accurate it is, but it's what was requested).

I have a NAS with a ton of photos and documents that have remained untouched for around 6 years. I uploaded all that stuff to OneDrive. Tidied it up and kept using OneDrive mostly. But I also sent stuff to the NAS. They have diverged.

I'm thinking about ways of restructuring/sorting my NAS to match my OneDrive so that I can then sync the two. I thought about making a python script that would just match on file names and move them to the correct location.

Figured before I did I'd ask if anyone else had any other suggestions

I'm hoping I might have some recommendations for a computer chassis. So far I've gotten away with using a couple of Fractal Designs, even got my hands on an old Cooler Master XB Evo recently that I never got to put into use.

Basically, I'm looking for a chassis with something like 6-10 hotswap 3.5 drive bays. Preferably horizontal, but vertical is begrudgingly acceptable. Are any of you aware of such a chassis, or am I forced to start looking at racks instead?

Alternatively, do any of you have experience with hacking together a case and installing drive bays?

Bit unrelated side-note: The front micro-jack in one of my cases has broken off (headset wire looped around the office chair) and Fractal Design wouldn't sell me a replacement. Any idea where I might find a female audio connector? I'll happily do a bit of soldering if necessary, I just don't know what the part called or where to look for it.

Edit2: I'm a mac user who doesn't understand how windows explorer works. Leaving the post for some hapless mac user who may come along. Windows explorer doesn't report how it is traversing the directory tree, leading to some confusion about where the search result is, which happens to be waaaay down in a zip of a mac application installer I had inadvertantly archived on the Windows disk. I would ask any windows users, how do I make powershell ls | select-string "text" behave like ls | grep "text" on unix?

edit3: Also, why the fudge would windows explorer search find <weird characters>net but not dotnet when typing 'net' into the search box?

So I download the occasional, um, linux distro installation video. I use a vpn and private firefox windows for most.

I'm doing some clean up today, and find a file with a bunch of strange characters, including the text characters, "net." "M⌐⌐v├▒├┼⌐▒net" is the filename listed in the properties window. Inside are a series of .ase files with mostly unrecognizable names.

I don't see the filename when doing an ls in powershell of the directory reported in explorer.

doing ls | select-string "net" in powershell results in an unending peristalsis of weird text like you might get from a binary file viewed in a text editor. I do notice, however, that some of the text might be from inside a zip file. But why is select-string searching inside the zip file? ls seems to ouptut only filepath information. Upon further investigation, the zip file is several directories down, it appears adding | select-string to ls makes ls travel the full tree. Wut?

And when I say undending, I mean it kept going until I hit ctrl-c.

Any ideas to what is happening here?

Incidentally, I opened one of the ASE files by right-click->view file in notepad+, which never launched.

Edit: lots of edits.

Edit: I changed some windows settings based on advice here. The situation is improved and I am going to see how things go before buying new equipment. Thank you everyone

So I recently bought a new laptop. I use an external mouse, keyboard, headphones etc, all of which come with usb A connectors that worked well with my old laptop.

When the new laptop arrived there weren't nearly enough ports for either usb A or usb c so I invested in a peripheral that links four usb a connections to one usb c connection on the laptop. Edit, it is powered and plugged in. Now the connection with everything plugged in seems to be intermittent and the mouse and external keyboard don't work reliably.

I have read a couple of articles and I am even more confused but they seem to be saying that usb c is not plug and play the way usb a was. What the fuck. Why do this like this? What do I do now?

I just spent significant money on this computer and I don't want to replace a functioning mouse and keyboard

Hi

I figured before I start venturing into other forums dedicated to this sort of thing, I'd ask here on Tildes since I'm at least comfortable with the community and how helpful they can be here.

I'm tired of all of the subscription services I have, movies and TV shows disappearing from them, buying a film on Prime and only being able to watch it offline through a specific app. Even then, half the time we're watching comfort TV shows that we have on DVD already (X-Files and Friends for instance).

So I figured that building a home media server would give me the chance to cut the cord with a couple of these services and allow us to start using and controlling our own data again.

I have a budget of around £300 (I could perhaps push to £400 if needed) and I'm honestly not sure at all where to start. I have knowledge on how to build brand new, medium to high end gaming PCs as I've done it since I was in my late teens and built my first PC with the wages from my very first job but building a budget minded PC for use as a home media server goes completely over my head.

I've noticed that a lot of the pre-built NAS or media server boxes are very expensive so my first thought was to buy a refurbed workstation or small form factor PC that has enough "oomph" to do the trick but I don't know what ones to even start looking at and then I start to feel a little bit out of my comfort zone.

Things like getting the right CPU in these refurbed machines that offers the features I'm looking for like hardware transcoding etc., integrated GPU's, ensuring there's enough SATA ports for multiple hard drives and an SSD for a boot drive, and then to top it all off ensuring that while achieving these features the thing shouldn't draw too much power when idling as it'll be on for long stretches of time, if not left on 24/7.

I've also got no knowledge of Linux, I've never even looked at it but if it's genuinely easy enough (for someone with next to no Linux experience) then I'd be happy to give it a shot if it offers better performance compared to using Windows 10 or something.

All the server will be used for is watching TV shows, perhaps the odd film, listening to a bit of music perhaps and the odd podcast now and again. Simultaneous streaming will be fairly minimal, perhaps 2 streams as me or my partner watch one thing and our daughter watches another on her tablet. In regards to streaming outside the house that will also be almost non-existent, perhaps, again our daughter watching a kids TV show like Pokemon or Fireman Sam on her tablet when we're out but me and my partner don't tend to watch anything when we're outside the house, certainly not TV shows or movies anyway.

Redundancy isn't something I'm too horrendously worried about, I wouldn't be storing anything like photos that we wouldn't want to lose on it and while it'd be annoying, losing a drive with TV shows or films on it wouldn't be the end of the world.

Any help would be massively appreciated, thanks.

Howdy, citizens!

So, after begging, borrowing and stealing, I've managed to piece together what I believe to be a barely capable rig so that I can get into playing this incredible looking game, but I'm running into a performance issue that makes it pretty unplayable.

Here's my rig:
AMD A-10 6800k @ 4.1 GHz
32 GB Ram
128 GB SanDisk SSD (for the game only, OS is on a similar size Kingston)
GTX 960 for the graphics.

Last night I tried running the game from my normal HD, which is a 1tb platter. This did not go well. Just moving my character around in the initial apartment was torture, and using anything in the room was an exercise in frustration to the point that the room ended up looking like a brawl had happened in it before I made it out, with coffee cups and water bottles all over the floor.

So, after I read a few pointers online, I salvaged the SanDisk from a different PC and began reinstalling on that. Today I hope to be able to move around smoothly enough to actually play, but aside from setting every option to its lowest, are there any other little tricks I can use to get it more playable?

Recently my daughter (third grade) has started learning to type at school. It's a Montessori program, so it's a pretty low tech environment overall, which I mention because I don't necessarily expect them to have a nuanced view of technology issues.

One of the typing programs they use is nitrotype.com, which adds a competitive gameplay element. However, it also has mechanism to friend another player. Friends can only communicate with stock phrases, so there's not too much "Internet leakage" beyond being able to choose a username.

I set it up for my daughter on her Linux Chromebook (I whitelist things I want her to have and everything else is blocked at DNS). Seeing her interact with it the first time, I realized that she spends as much time "adding friends" as doing the typing.

On its face, this activity is pretty harmless. But I am worried about the patterns it might be creating for her. I'm worried about her uncritically engaging with the dopamine hit of getting a new friend. Or how it shapes her idea of how many friends she has or where idea of her self worth comes from. Or what she thinks friends are.

So after that long preamble, here are some questions:

• How would you explain "friends" in this context?
• Would you distinguish them from other kinds of friends, either real or virtual?
• Would you attach a moral component to the activity? E.g. that it is good/bad or helpful/harmful
• How would you frame it to the teacher? Not so much in terms of whether or not they should do it in the classroom, but what kinds of conversations should they be having about the friends experience?
• If I'm asking the wrong questions, what questions should I be asking instead?

I'm really interested in seeing the perspectives people have on this. My own ideas are a bit murky, but I will put them down as a comment.

I received a quote from a local contractor to do some home remodeling. Some of the numbers make sense, but some seem quite high. Like, I can't believe it costs $3k in labor to install an electric fireplace insert, or an island hood. Anybody have any insight they're willing to share on this quote?

Remodel estimate

1. Planning and asbestos test $1,190.00
2. Move range outlet $1,514.00
3. Island hood $4,498.00
4. Electric fireplace insert $4,133.00
5. Main bathroom $36,552.00
6. Hall bathroom toilet and fan with humidistat $3,579.00
7. Concrete landings outside the front and back doors, front siding flashing $2,899.00
8. Re-pipe plumbing $14,993.00
9. Bedroom window glass replacement $749.00
   Total $70,107.00

Description
Plans will be refined. Drywall will be tested for asbestos content.
Dust will be contained and floors will be protected.
The range outlet will be moved.
An island range hood will be installed. The placeholder hood in the estimate is a Zephyr Brisas.
An electric fireplace insert will be installed. The placeholder fireplace in the estimate is a
Dimplex 500001756.
The main bathroom will be remodeled. The shower will be replaced with a pre-formed shower
pan and Corian walls, and two shower valves and shower heads will be installed. A sliding
shower door will be installed. The floor will be tiled. A new vanity cabinet, countertop, sink, and
faucet will be installed. A new toilet will be installed. The vanity electrical outlets will be
lowered, a larger lower mirror will be installed, a new vanity light will be installed. A ventilation
fan and light will be installed with a humidistat/condensation sensor. Drywall will be patched.
New baseboard trim will be installed. The bathroom will be painted.
The hall bathroom toilet will be replaced. A ventilation fan with a humidistat will be installed.
Concrete landings will be poured outside the front door and outside the back sliding door. The
front door landing will be about 5-1/2’x4’ with a curved corner. The back landing will be about
3-1/2’x3’.
The plumbing in the house will be replaced. Drywall holes from installation will be patched and
painted.
Window glass will be replaced in the bedroom with the broken window pane.
Everything will be cleaned up.
All labor and materials are included.

Thank you!

Hello tabletop community,

I am designing my first ever boss fight, meant to really challenge my players. I don't want to kill any of them off since we're all new and it feels weird to lose a character, but I also want it to feel threatening. I could use some advice about how to execute this situation:

Boss is a big mimic disguised as a blood fountain with 6 long tentacle arms, each of which will be it's own figure on the board that can be up to 3 tiles from the 3x3 mimic figure.

Four of the tentacles have weapons that can deal 2d6 damage and have 30hp AC11 (roughly making it in line with a Brown Bear for threat and HP). They can grapple (squeeze the target) instead for 1d8 damage per turn, escapable on DC13 strength.

Two of the tentacles have shield-like hard points that defend neighboring enemies by giving disadvantage on attack rolls against them. AC14 HP30. I couldn't find anything to base these on for an encounter designer app.

Main body has low movement (10ft), and has 200hp AC19, and loses 20hp per tentacle lost. It has a bite attack +6 to hit 2d8. It also floods blood through sections of the room, forcing player movement and dealing 2d8 poison damage. I based it on a Roper for difficulty and attacks.

I think this combination creature would provide a very interesting and movement focused fight, but I'm very new to DM'ing and I'm afraid of accidentally killing the players.

My questions are: (1) How do I avoid accidentally killing everyone? (2) Is this fight too hard for a newbie group of 5 new players? (3) Any other cool ideas I didn't think of?

Hey Tildes,

I work at an international company which, over the course of COVID, probably had a turnover rate of 80% over two-three years. This was less due to the company, and more due to the incredibly restrictive COVID policies that the country we are located in tried to enforce. I was brought on in 2020, and due to the hemorrhaging of long term employees, a large gap in institutional knowledge was created.

We aren't a tech company, and use Google Workspace/Drive for a lot of our storage and documentation. Within my department I recently put in a lot of effort to create a file organization structure and proper documentation so that we would no longer lose resources and knowledge when people left - and a main purpose was to make it as easy for people to use, cut down on work, find information faster, and provide an easy way to leave with a bunch of resources if they wanted to move to a different company (we aren't in a field where we really compete with others or would lose an intellectual property). It was received with a ton of positive feedback from my peers and direct superiors.

This effort was recently noticed by management and I have been tasked with providing a rollout plan to get the entire organization on a similar structure with documentation processes for every department. My issue is, how does one enforce usage and standardization of documentation and following a certain file organizational structure? While I can think of a ton of ways to structure my process, communicate, and demonstrate the benefits to people, I know that there will be resistance (and in some cases, non-compliance) from staff. I am more than willing to work with them, provide training, and do a lot of the leg work myself, but I am wondering if anyone here has gone through something similar and has good strategies on what I can only describe as leading without authority.

My initial plan was to use the results from my department to get the more enthusiastic departments on board first, and then hopefully good word will spread to help reduce friction with other departments that may be more resistance and not as technologically inclined. However, I know that no matter what I do, I will hit resistance at some point.

The only two times I have had a similar task at a previous employer I had absolute full reign over everything, and it was a completely solo endeavour, or was working with such a small tight-knit group that I didn't have to worry about non-compliance. This is my first time working on such a project in a larger organization and could really use tips from others experience.

I'm trying to not dox myself here - but hope I provided enough information to get some overall tips and comments.

Hi Tildestrians! I recently acquired a broken Sony TV from work. Its older, but its 4K, and would be a substantial upgrade over my current TV, so I am hoping to fix it. My usual willingness to tinker and google prowess has failed me. I am hoping one of you can provide some guidance.

Its a Sony XBR-55X850B. It is showing an error code of 7 flashing red lights. I tracked down the service manual (Sony, you should really have this available to customers and not locked behind an "authorized service center" certification), and it says the motherboard needs to be replaced. I found a replacement motherboard on ebay (it was for the 65 inch version, but that should not make a difference). I installed, and it gave a different error code. I think it was flashing green and orange. Based on my research, that means it needs new firmware to be flashed. Sony's website doesn't still have the firmware file for that TV (should be illegal in my opinion), and tells you to contact support. Support seemingly can't give out the firmware file either. I found a firmware file on Softpedia, but I have no idea if it is legitimate or even still a working file. Threw that on a fat32 drive, and couldn't manage to get it to update. I tried multiple drives and all usb ports over the course of 2 weeks. I ended up pulling the new motherboard and returning it (thankfully I was able to return it for full price). Now I am stuck with a TV panel that works perfectly, except for the motherboard, and I seemingly can't replace the motherboard.

This got me thinking: I don't need anything fancy. I want a display with an HDMI input that takes 4K signal and puts it on the screen. I truly don't need anything more than that. Even an IR remote for power is optional, because I could plug it into a smart outlet. I don't need the speakers because I have a receiver. I know you can get bypass boards to turn laptop screens into monitors. They take the place of the support circuitry on the laptop motherboard and give you a display input, and nothing more. Is there anything like that I can get for this TV? I don't know where to start on that search.

Or are there any other routes I should explore before junking this TV? It feels really bad to throw out a perfectly good 4k panel just because the motherboard is broken.

Being Danish I've never really had any reason to know anything about this holiday - all I know is cursory stuff from movies and whatever one might stumble upon on the internet. Something about pilgrims and eating and/or pardoning birds. But yeah my friend invited me for Thanksgiving because her wife is American and wants to celebrate. But I don't know what I've gotten myself into 😅

There will be other expat Americans as well which makes me a little more nervous, so I'm hoping to learn a thing or two from you all on tildes so please give me any and all advice you can!

I'm looking for general advice about it but I guess I have a couple of specific questions too. They are not very traditional people so it's not going to be formal, and they have called it both Thanksgiving and Friendsgiving - but is there any particular difference between the two? And my other question is what would be a good present for the hostesses - do guests usually give anything particular? Or will the usual flowers/wine kind of thing be okay?

I have a rather impressive collection of thrifted equipment I use for my morning latte. Each piece has required a little bit of investigative repair in order to get it working just right, but I've recently been stumped by my newest addition, a Bodum conical burr grinder.

My current espresso machine is a single boiler Breville with a standard portafilter (no diaphragm or valves in the portafilter, so the resistance needs to come from finely enough ground coffee.)

My question is this; is it possible to calibrate the Bodum grinder at all? It's finest setting is apparently not quite fine enough to provide the right resistance for the espresso maker, so I've needed to regrind my coffee with a blade grinder to get the right consistency.

Cheers in advance!

Hello folks

Recently we've been playing with Powershell and having to move on to graph to do all the fancy things we want to achieve. MS forced this when they suddenly decided the MSOnline module was retired and things stopped working.

We've built a great New Team with SharePoint and including folders script. One of the things we used to do with the PNP module is set folder permission on two of the folders in a new team, making them only accessible to Owners. How the devil does one achieve this with Graph?

Any pointers would be grand.

I'm helping some friends setting up a bar/little restaurant. they have some tvs and are looking for an audio system.
The idea is that they can put on some music videos/sports and it shows up on all TVs and audio goes to their (to be bought) soundsystem.

all this has to be as cheap as possible, as we're in a low income country.
The environment is quite loud. so it needs some power.

So I think I just gonna buy a cheapish hifi-system with 4 passive speakers, connect it with their "smartest" tv (they are all off-brand) and run audio cables to the different areas and speakers.

how to synchronize the tvs I still have no idea, but it is not really a priority

So my questions

• What is something like this even called? with the keywords I tired i only find nothing or very expensive pro solutions.
• how would you resolve the video part? 3x 15m HDMI cables seem quite expensive, but might be the only solution. how do i split the signal?
• might it be better to buy active speakers and use a small mixer?

If you have experience in this I would be very happy for your advice/opinion.

We found out recently that we are expecting an addition to our family and are incredibly excited! It's still early on so we are not trying to get overly excited knowing that things can happen in the first trimester, but would like to begin educating ourselves on the pregnancy process and parenting.

Am curious and would love to hear from everyone what resources they found most helpful on these subjects. Pros for evidence based sources that manage to not be overly dry. Send me what you got! Any general advice you have would also be greatly appreciated :)

Hello Tildes community,

I am soon going to DM my second ever mini-session for a small group of fairly new players. I'd like to send the group into a haunted tavern that has an unusually intelligent mimic in the basement that has been eating tourists that pass through, leaving behind undead creatures throughout the basement.

My primary goal with this is to help the players (most pretty new) understand how to conserve their magic instead of firing it all off in each battle, so I wanted to prevent them from long resting. I figure I could magically lock them inside when they arrive, and then let them learn that if they should rest, previously killed undead creatures (like Minotaur Skeleton or zombies) resurrect after about an hour.

I am looking for two pieces of advice. First, I'd like to know good creatures to put into the dungeon that would provide a challenge, but not be too devastating. I looked at Wraith, for example, but a Wraith could easily one-shot any of the casters in the group and instantly kill them, which isn't fun. What should I be using instead? Remember that each individual fight doesn't need to be too hard, I just want the group to start feeling the strain of resources getting exhausted.

Secondly, the primary DM (who I am running a single session for) has said I can level up the party to 6 during the dungeon. Does this essentially heal the whole party and refresh their spell slots, ala most RPG games? I'm a bit confused how this part would work, tbh.

Thanks for your help, and big thanks to everyone who answered my last question about a Kobold Brewery. It was a blast, and the party loved it, particularly some of the traps that y'all came up with. By the time the party escaped, the entire brewery was on fire, which was amazing.

Appreciate your help!

Hello all,

So I built a new rig with some of the great CPU bundle deals that came along recently, and now I'm enjoying Cyberpunk with the absolutely glorious pathtracing+DLSS combo - thoroughly enjoying it. I've been customizing a lot of the keybindings to my exact preferences by editing the InputUserMappings.xml and UserSettings.json files and have been able to figure everything out except one.

I have installed a number of mods, one of which allows me to customize the first person driving camera to be much better for my setup. One thing I cannot change, however, is radio volume while I'm in the car.

So, I was wondering if it's possible to make a new keybinding that changes the CarRadioVolume setting in UserSettings.json up and down. Ideally, I'd bind it to my mousewheel so it would be like having a volume knob while I'm driving around. There are also some keybinds located in this same file, but they are a different type of value (a name) whereas the CarRadioVolume is an int value. I have not seen any other settings that are of the type I'm trying to make: a keybind that changes an int value up and down. If I did, I'd just try and copy that.

So, as someone very unfamiliar with programming, I was wondering if this is even possible to make a keybind for this without making a mod/extra script to do it? Or does the game's engine/logic have to already have this type of keybind built into it in order to edit it? Thanks in advance for any info!